[Uboot-stm32] [PATCH 1/4] stm32mp: stm32prog: Add Kconfig file for stm32prog command

[Patrice CHOTARD]

Hi

On 3/9/21 2:07 PM, Patrice CHOTARD wrote:
> Hi Patrick
> 
> On 2/25/21 1:37 PM, Patrick Delaunay wrote:
>> Move CONFIG_CMD_STM32PROG in a specific Kconfig file for stm32prog command.
>>
>> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
>> ---
>>
>>  arch/arm/mach-stm32mp/Kconfig               | 18 +-----------------
>>  arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig | 18 ++++++++++++++++++
>>  2 files changed, 19 insertions(+), 17 deletions(-)
>>  create mode 100644 arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig
>>
>> diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
>> index f538d7cb83..079d66a80c 100644
>> --- a/arch/arm/mach-stm32mp/Kconfig
>> +++ b/arch/arm/mach-stm32mp/Kconfig
>> @@ -121,23 +121,6 @@ config STM32_ETZPC
>>  	help
>>  	  Say y to enable STM32 Extended TrustZone Protection
>>  
>> -config CMD_STM32PROG
>> -	bool "command stm32prog for STM32CudeProgrammer"
>> -	select DFU
>> -	select DFU_RAM
>> -	select DFU_VIRT
>> -	select PARTITION_TYPE_GUID
>> -	imply CMD_GPT if MMC
>> -	imply CMD_MTD if MTD
>> -	imply DFU_MMC if MMC
>> -	imply DFU_MTD if MTD
>> -	help
>> -		activate a specific command stm32prog for STM32MP soc family
>> -		witch update the device with the tools STM32CubeProgrammer,
>> -		using UART with STM32 protocol or USB with DFU protocol
>> -		NB: access to not volatile memory (NOR/NAND/SD/eMMC) is based
>> -		    on U-Boot DFU framework
>> -
>>  config CMD_STM32KEY
>>  	bool "command stm32key to fuse public key hash"
>>  	default y
>> @@ -177,6 +160,7 @@ config DEBUG_UART_CLOCK
>>  	default 64000000
>>  endif
>>  
>> +source "arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig"
>>  source "board/st/stm32mp1/Kconfig"
>>  source "board/dhelectronics/dh_stm32mp1/Kconfig"
>>  
>> diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig b/arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig
>> new file mode 100644
>> index 0000000000..609a678793
>> --- /dev/null
>> +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig
>> @@ -0,0 +1,18 @@
>> +
>> +config CMD_STM32PROG
>> +	bool "command stm32prog for STM32CudeProgrammer"
>> +	select DFU
>> +	select DFU_RAM
>> +	select DFU_VIRT
>> +	select PARTITION_TYPE_GUID
>> +	imply CMD_GPT if MMC
>> +	imply CMD_MTD if MTD
>> +	imply DFU_MMC if MMC
>> +	imply DFU_MTD if MTD
>> +	help
>> +		activate a specific command stm32prog for STM32MP soc family
>> +		witch update the device with the tools STM32CubeProgrammer,
>> +		using UART with STM32 protocol or USB with DFU protocol
>> +		NB: access to not volatile memory (NOR/NAND/SD/eMMC) is based
>> +		    on U-Boot DFU framework
>> +
>>
> 
> 
> Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>
> 
> Thanks
> Patrice
> _______________________________________________
> Uboot-stm32 mailing list
> Uboot-stm32 at st-md-mailman.stormreply.com
> https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32
> 
Applied to u-boot-stm/next

Thanks

Patrice