[PATCH 2/2] video: dw_mipi_dsi: update log of dphy_enable

[Patrice CHOTARD]

Hi

On 3/4/21 4:00 PM, yannick Fertre wrote:
> Acked-by: Yannick Fertre <yannick.fertre at foss.st.com>
> 
> 
> On 3/4/21 1:14 PM, Patrick Delaunay wrote:
>> From: Yannick Fertre <yannick.fertre at foss.st.com>
>>
>> The DSI phy can be turned on from the DSI digital interface in
>> the dphy_enable() function or from a dedicated DSI phy "wrapper"
>> in phy_ops->init() function. If the STM32MP1 case, the wrapper
>> is used then the dphy_enable() "warning" traces are not relevant.
>>
>> This patch moves these "warning" traces to "debug" traces so
>> they are still available for DSI phy based on the digital
>> interface in debug logging mode, but not there in normal mode
>> for both cases.
>> Note: The related Linux kernel driver uses a "debug"
>> message too.
>>
>> Signed-off-by: Yannick Fertre <yannick.fertre at foss.st.com>
>> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
>> ---
>>
>>   drivers/video/dw_mipi_dsi.c | 8 ++++----
>>   1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/video/dw_mipi_dsi.c b/drivers/video/dw_mipi_dsi.c
>> index a5beed3514..9ae09eec12 100644
>> --- a/drivers/video/dw_mipi_dsi.c
>> +++ b/drivers/video/dw_mipi_dsi.c
>> @@ -721,15 +721,15 @@ static void dw_mipi_dsi_dphy_enable(struct dw_mipi_dsi *dsi)
>>       ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS, val,
>>                    val & PHY_LOCK, PHY_STATUS_TIMEOUT_US);
>>       if (ret)
>> -        dev_warn(dsi->dsi_host.dev,
>> -             "failed to wait phy lock state\n");
>> +        dev_dbg(dsi->dsi_host.dev,
>> +            "failed to wait phy lock state\n");
>>         ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS,
>>                    val, val & PHY_STOP_STATE_CLK_LANE,
>>                    PHY_STATUS_TIMEOUT_US);
>>       if (ret)
>> -        dev_warn(dsi->dsi_host.dev,
>> -             "failed to wait phy clk lane stop state\n");
>> +        dev_dbg(dsi->dsi_host.dev,
>> +            "failed to wait phy clk lane stop state\n");
>>   }
>>     static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi)
>>
Applied to u-boot-stm/next

Thanks

Patrice