[PATCH v2 3/8] drivers: clk: add fu740 support
Green Wan
green.wan at sifive.com
Tue Mar 16 17:33:11 CET 2021
Add fu740 support. One abstract layer is added for supporting
multiple chips such as fu540 and fu740.
Signed-off-by: Green Wan <green.wan at sifive.com>
---
drivers/clk/sifive/Kconfig | 8 +-
drivers/clk/sifive/Makefile | 4 +-
drivers/clk/sifive/fu540-prci.c | 769 ++-------------------------------------
drivers/clk/sifive/fu540-prci.h | 22 ++
drivers/clk/sifive/fu740-prci.c | 158 ++++++++
drivers/clk/sifive/fu740-prci.h | 22 ++
drivers/clk/sifive/sifive-prci.c | 733 +++++++++++++++++++++++++++++++++++++
drivers/clk/sifive/sifive-prci.h | 323 ++++++++++++++++
8 files changed, 1286 insertions(+), 753 deletions(-)
create mode 100644 drivers/clk/sifive/fu540-prci.h
create mode 100644 drivers/clk/sifive/fu740-prci.c
create mode 100644 drivers/clk/sifive/fu740-prci.h
create mode 100644 drivers/clk/sifive/sifive-prci.c
create mode 100644 drivers/clk/sifive/sifive-prci.h
diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig
index c4d0a1f..20fc004 100644
--- a/drivers/clk/sifive/Kconfig
+++ b/drivers/clk/sifive/Kconfig
@@ -6,11 +6,11 @@ config CLK_SIFIVE
help
SoC drivers for SiFive Linux-capable SoCs.
-config CLK_SIFIVE_FU540_PRCI
- bool "PRCI driver for SiFive FU540 SoCs"
+config CLK_SIFIVE_PRCI
+ bool "PRCI driver for SiFive SoCs"
depends on CLK_SIFIVE
select CLK_ANALOGBITS_WRPLL_CLN28HPC
help
Supports the Power Reset Clock interface (PRCI) IP block found in
- FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC,
- enable this driver.
+ FU540/FU740 SoCs. If this kernel is meant to run on a SiFive FU540/
+ FU740 SoCs, enable this driver.
diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile
index b224279..51348b1 100644
--- a/drivers/clk/sifive/Makefile
+++ b/drivers/clk/sifive/Makefile
@@ -1,3 +1,5 @@
# SPDX-License-Identifier: GPL-2.0+
-obj-$(CONFIG_CLK_SIFIVE_FU540_PRCI) += fu540-prci.o
+obj-y += sifive-prci.o
+
+obj-$(CONFIG_CLK_SIFIVE_PRCI) += fu540-prci.o fu740-prci.o
diff --git a/drivers/clk/sifive/fu540-prci.c b/drivers/clk/sifive/fu540-prci.c
index b3882d0..ceb2c6f 100644
--- a/drivers/clk/sifive/fu540-prci.c
+++ b/drivers/clk/sifive/fu540-prci.c
@@ -5,6 +5,8 @@
* Copyright (C) 2018 SiFive, Inc.
* Wesley Terpstra
* Paul Walmsley
+ * Zong Li
+ * Pragnesh Patel
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -15,632 +17,48 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * The FU540 PRCI implements clock and reset control for the SiFive
- * FU540-C000 chip. This driver assumes that it has sole control
- * over all PRCI resources.
- *
- * This driver is based on the PRCI driver written by Wesley Terpstra.
- *
- * Refer, commit 999529edf517ed75b56659d456d221b2ee56bb60 of:
- * https://github.com/riscv/riscv-linux
- *
* References:
* - SiFive FU540-C000 manual v1p0, Chapter 7 "Clocking and Reset"
*/
-#include <common.h>
-#include <clk-uclass.h>
-#include <clk.h>
-#include <div64.h>
-#include <dm.h>
-#include <dm/device.h>
-#include <dm/device_compat.h>
-#include <dm/uclass.h>
#include <dt-bindings/clock/sifive-fu540-prci.h>
-#include <dt-bindings/reset/sifive-fu540-prci.h>
-#include <errno.h>
-#include <reset-uclass.h>
-#include <asm/io.h>
-#include <asm/arch/reset.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/math64.h>
-#include <linux/clk/analogbits-wrpll-cln28hpc.h>
-
-/*
- * EXPECTED_CLK_PARENT_COUNT: how many parent clocks this driver expects:
- * hfclk and rtcclk
- */
-#define EXPECTED_CLK_PARENT_COUNT 2
-
-/*
- * Register offsets and bitmasks
- */
-
-/* COREPLLCFG0 */
-#define PRCI_COREPLLCFG0_OFFSET 0x4
-#define PRCI_COREPLLCFG0_DIVR_SHIFT 0
-#define PRCI_COREPLLCFG0_DIVR_MASK (0x3f << PRCI_COREPLLCFG0_DIVR_SHIFT)
-#define PRCI_COREPLLCFG0_DIVF_SHIFT 6
-#define PRCI_COREPLLCFG0_DIVF_MASK (0x1ff << PRCI_COREPLLCFG0_DIVF_SHIFT)
-#define PRCI_COREPLLCFG0_DIVQ_SHIFT 15
-#define PRCI_COREPLLCFG0_DIVQ_MASK (0x7 << PRCI_COREPLLCFG0_DIVQ_SHIFT)
-#define PRCI_COREPLLCFG0_RANGE_SHIFT 18
-#define PRCI_COREPLLCFG0_RANGE_MASK (0x7 << PRCI_COREPLLCFG0_RANGE_SHIFT)
-#define PRCI_COREPLLCFG0_BYPASS_SHIFT 24
-#define PRCI_COREPLLCFG0_BYPASS_MASK (0x1 << PRCI_COREPLLCFG0_BYPASS_SHIFT)
-#define PRCI_COREPLLCFG0_FSE_SHIFT 25
-#define PRCI_COREPLLCFG0_FSE_MASK (0x1 << PRCI_COREPLLCFG0_FSE_SHIFT)
-#define PRCI_COREPLLCFG0_LOCK_SHIFT 31
-#define PRCI_COREPLLCFG0_LOCK_MASK (0x1 << PRCI_COREPLLCFG0_LOCK_SHIFT)
-
-/* COREPLLCFG1 */
-#define PRCI_COREPLLCFG1_OFFSET 0x8
-#define PRCI_COREPLLCFG1_CKE_SHIFT 31
-#define PRCI_COREPLLCFG1_CKE_MASK (0x1 << PRCI_COREPLLCFG1_CKE_SHIFT)
-
-/* DDRPLLCFG0 */
-#define PRCI_DDRPLLCFG0_OFFSET 0xc
-#define PRCI_DDRPLLCFG0_DIVR_SHIFT 0
-#define PRCI_DDRPLLCFG0_DIVR_MASK (0x3f << PRCI_DDRPLLCFG0_DIVR_SHIFT)
-#define PRCI_DDRPLLCFG0_DIVF_SHIFT 6
-#define PRCI_DDRPLLCFG0_DIVF_MASK (0x1ff << PRCI_DDRPLLCFG0_DIVF_SHIFT)
-#define PRCI_DDRPLLCFG0_DIVQ_SHIFT 15
-#define PRCI_DDRPLLCFG0_DIVQ_MASK (0x7 << PRCI_DDRPLLCFG0_DIVQ_SHIFT)
-#define PRCI_DDRPLLCFG0_RANGE_SHIFT 18
-#define PRCI_DDRPLLCFG0_RANGE_MASK (0x7 << PRCI_DDRPLLCFG0_RANGE_SHIFT)
-#define PRCI_DDRPLLCFG0_BYPASS_SHIFT 24
-#define PRCI_DDRPLLCFG0_BYPASS_MASK (0x1 << PRCI_DDRPLLCFG0_BYPASS_SHIFT)
-#define PRCI_DDRPLLCFG0_FSE_SHIFT 25
-#define PRCI_DDRPLLCFG0_FSE_MASK (0x1 << PRCI_DDRPLLCFG0_FSE_SHIFT)
-#define PRCI_DDRPLLCFG0_LOCK_SHIFT 31
-#define PRCI_DDRPLLCFG0_LOCK_MASK (0x1 << PRCI_DDRPLLCFG0_LOCK_SHIFT)
-
-/* DDRPLLCFG1 */
-#define PRCI_DDRPLLCFG1_OFFSET 0x10
-#define PRCI_DDRPLLCFG1_CKE_SHIFT 31
-#define PRCI_DDRPLLCFG1_CKE_MASK (0x1 << PRCI_DDRPLLCFG1_CKE_SHIFT)
-
-/* GEMGXLPLLCFG0 */
-#define PRCI_GEMGXLPLLCFG0_OFFSET 0x1c
-#define PRCI_GEMGXLPLLCFG0_DIVR_SHIFT 0
-#define PRCI_GEMGXLPLLCFG0_DIVR_MASK \
- (0x3f << PRCI_GEMGXLPLLCFG0_DIVR_SHIFT)
-#define PRCI_GEMGXLPLLCFG0_DIVF_SHIFT 6
-#define PRCI_GEMGXLPLLCFG0_DIVF_MASK \
- (0x1ff << PRCI_GEMGXLPLLCFG0_DIVF_SHIFT)
-#define PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT 15
-#define PRCI_GEMGXLPLLCFG0_DIVQ_MASK (0x7 << PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT)
-#define PRCI_GEMGXLPLLCFG0_RANGE_SHIFT 18
-#define PRCI_GEMGXLPLLCFG0_RANGE_MASK \
- (0x7 << PRCI_GEMGXLPLLCFG0_RANGE_SHIFT)
-#define PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT 24
-#define PRCI_GEMGXLPLLCFG0_BYPASS_MASK \
- (0x1 << PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT)
-#define PRCI_GEMGXLPLLCFG0_FSE_SHIFT 25
-#define PRCI_GEMGXLPLLCFG0_FSE_MASK \
- (0x1 << PRCI_GEMGXLPLLCFG0_FSE_SHIFT)
-#define PRCI_GEMGXLPLLCFG0_LOCK_SHIFT 31
-#define PRCI_GEMGXLPLLCFG0_LOCK_MASK (0x1 << PRCI_GEMGXLPLLCFG0_LOCK_SHIFT)
-
-/* GEMGXLPLLCFG1 */
-#define PRCI_GEMGXLPLLCFG1_OFFSET 0x20
-#define PRCI_GEMGXLPLLCFG1_CKE_SHIFT 31
-#define PRCI_GEMGXLPLLCFG1_CKE_MASK (0x1 << PRCI_GEMGXLPLLCFG1_CKE_SHIFT)
-
-/* CORECLKSEL */
-#define PRCI_CORECLKSEL_OFFSET 0x24
-#define PRCI_CORECLKSEL_CORECLKSEL_SHIFT 0
-#define PRCI_CORECLKSEL_CORECLKSEL_MASK \
- (0x1 << PRCI_CORECLKSEL_CORECLKSEL_SHIFT)
-
-/* DEVICESRESETREG */
-#define PRCI_DEVICESRESETREG_OFFSET 0x28
-#define PRCI_DEVICERESETCNT 5
-
-#define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_MASK \
- (0x1 << PRCI_RST_DDR_CTRL_N)
-#define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_MASK \
- (0x1 << PRCI_RST_DDR_AXI_N)
-#define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_MASK \
- (0x1 << PRCI_RST_DDR_AHB_N)
-#define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_MASK \
- (0x1 << PRCI_RST_DDR_PHY_N)
-#define PRCI_DEVICESRESETREG_GEMGXL_RST_N_MASK \
- (0x1 << PRCI_RST_GEMGXL_N)
-
-/* CLKMUXSTATUSREG */
-#define PRCI_CLKMUXSTATUSREG_OFFSET 0x2c
-#define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT 1
-#define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK \
- (0x1 << PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT)
-
-/* PROCMONCFG */
-#define PRCI_PROCMONCFG_OFFSET 0xF0
-#define PRCI_PROCMONCFG_CORE_CLOCK_SHIFT 24
-#define PRCI_PROCMONCFG_CORE_CLOCK_MASK \
- (0x1 << PRCI_PROCMONCFG_CORE_CLOCK_SHIFT)
-
-/*
- * Private structures
- */
-
-/**
- * struct __prci_data - per-device-instance data
- * @va: base virtual address of the PRCI IP block
- * @parent: parent clk instance
- *
- * PRCI per-device instance data
- */
-struct __prci_data {
- void *va;
- struct clk parent_hfclk;
- struct clk parent_rtcclk;
-};
-
-/**
- * struct __prci_wrpll_data - WRPLL configuration and integration data
- * @c: WRPLL current configuration record
- * @enable_bypass: fn ptr to code to bypass the WRPLL (if applicable; else NULL)
- * @disable_bypass: fn ptr to code to not bypass the WRPLL (or NULL)
- * @cfg0_offs: WRPLL CFG0 register offset (in bytes) from the PRCI base address
- * @cfg1_offs: WRPLL CFG1 register offset (in bytes) from the PRCI base address
- * @release_reset: fn ptr to code to release clock reset
- *
- * @enable_bypass and @disable_bypass are used for WRPLL instances
- * that contain a separate external glitchless clock mux downstream
- * from the PLL. The WRPLL internal bypass mux is not glitchless.
- */
-struct __prci_wrpll_data {
- struct wrpll_cfg c;
- void (*enable_bypass)(struct __prci_data *pd);
- void (*disable_bypass)(struct __prci_data *pd);
- u8 cfg0_offs;
- u8 cfg1_offs;
- void (*release_reset)(struct __prci_data *pd);
-};
-
-struct __prci_clock;
-
-/* struct __prci_clock_ops - clock operations */
-struct __prci_clock_ops {
- int (*set_rate)(struct __prci_clock *pc,
- unsigned long rate,
- unsigned long parent_rate);
- unsigned long (*round_rate)(struct __prci_clock *pc,
- unsigned long rate,
- unsigned long *parent_rate);
- unsigned long (*recalc_rate)(struct __prci_clock *pc,
- unsigned long parent_rate);
- int (*enable_clk)(struct __prci_clock *pc, bool enable);
-};
-
-/**
- * struct __prci_clock - describes a clock device managed by PRCI
- * @name: user-readable clock name string - should match the manual
- * @parent_name: parent name for this clock
- * @ops: struct __prci_clock_ops for control
- * @pwd: WRPLL-specific data, associated with this clock (if not NULL)
- * @pd: PRCI-specific data associated with this clock (if not NULL)
- *
- * PRCI clock data. Used by the PRCI driver to register PRCI-provided
- * clocks to the Linux clock infrastructure.
- */
-struct __prci_clock {
- const char *name;
- const char *parent_name;
- const struct __prci_clock_ops *ops;
- struct __prci_wrpll_data *pwd;
- struct __prci_data *pd;
-};
-
-/*
- * Private functions
- */
-
-/**
- * __prci_readl() - read from a PRCI register
- * @pd: PRCI context
- * @offs: register offset to read from (in bytes, from PRCI base address)
- *
- * Read the register located at offset @offs from the base virtual
- * address of the PRCI register target described by @pd, and return
- * the value to the caller.
- *
- * Context: Any context.
- *
- * Return: the contents of the register described by @pd and @offs.
- */
-static u32 __prci_readl(struct __prci_data *pd, u32 offs)
-{
- return readl(pd->va + offs);
-}
-
-static void __prci_writel(u32 v, u32 offs, struct __prci_data *pd)
-{
- writel(v, pd->va + offs);
-}
-
-/* WRPLL-related private functions */
-
-/**
- * __prci_wrpll_unpack() - unpack WRPLL configuration registers into parameters
- * @c: ptr to a struct wrpll_cfg record to write config into
- * @r: value read from the PRCI PLL configuration register
- *
- * Given a value @r read from an FU540 PRCI PLL configuration register,
- * split it into fields and populate it into the WRPLL configuration record
- * pointed to by @c.
- *
- * The COREPLLCFG0 macros are used below, but the other *PLLCFG0 macros
- * have the same register layout.
- *
- * Context: Any context.
- */
-static void __prci_wrpll_unpack(struct wrpll_cfg *c, u32 r)
-{
- u32 v;
-
- v = r & PRCI_COREPLLCFG0_DIVR_MASK;
- v >>= PRCI_COREPLLCFG0_DIVR_SHIFT;
- c->divr = v;
-
- v = r & PRCI_COREPLLCFG0_DIVF_MASK;
- v >>= PRCI_COREPLLCFG0_DIVF_SHIFT;
- c->divf = v;
-
- v = r & PRCI_COREPLLCFG0_DIVQ_MASK;
- v >>= PRCI_COREPLLCFG0_DIVQ_SHIFT;
- c->divq = v;
-
- v = r & PRCI_COREPLLCFG0_RANGE_MASK;
- v >>= PRCI_COREPLLCFG0_RANGE_SHIFT;
- c->range = v;
-
- c->flags &= (WRPLL_FLAGS_INT_FEEDBACK_MASK |
- WRPLL_FLAGS_EXT_FEEDBACK_MASK);
-
- /* external feedback mode not supported */
- c->flags |= WRPLL_FLAGS_INT_FEEDBACK_MASK;
-}
-
-/**
- * __prci_wrpll_pack() - pack PLL configuration parameters into a register value
- * @c: pointer to a struct wrpll_cfg record containing the PLL's cfg
- *
- * Using a set of WRPLL configuration values pointed to by @c,
- * assemble a PRCI PLL configuration register value, and return it to
- * the caller.
- *
- * Context: Any context. Caller must ensure that the contents of the
- * record pointed to by @c do not change during the execution
- * of this function.
- *
- * Returns: a value suitable for writing into a PRCI PLL configuration
- * register
- */
-static u32 __prci_wrpll_pack(const struct wrpll_cfg *c)
-{
- u32 r = 0;
-
- r |= c->divr << PRCI_COREPLLCFG0_DIVR_SHIFT;
- r |= c->divf << PRCI_COREPLLCFG0_DIVF_SHIFT;
- r |= c->divq << PRCI_COREPLLCFG0_DIVQ_SHIFT;
- r |= c->range << PRCI_COREPLLCFG0_RANGE_SHIFT;
-
- /* external feedback mode not supported */
- r |= PRCI_COREPLLCFG0_FSE_MASK;
-
- return r;
-}
-
-/**
- * __prci_wrpll_read_cfg0() - read the WRPLL configuration from the PRCI
- * @pd: PRCI context
- * @pwd: PRCI WRPLL metadata
- *
- * Read the current configuration of the PLL identified by @pwd from
- * the PRCI identified by @pd, and store it into the local configuration
- * cache in @pwd.
- *
- * Context: Any context. Caller must prevent the records pointed to by
- * @pd and @pwd from changing during execution.
- */
-static void __prci_wrpll_read_cfg0(struct __prci_data *pd,
- struct __prci_wrpll_data *pwd)
-{
- __prci_wrpll_unpack(&pwd->c, __prci_readl(pd, pwd->cfg0_offs));
-}
-
-/**
- * __prci_wrpll_write_cfg0() - write WRPLL configuration into the PRCI
- * @pd: PRCI context
- * @pwd: PRCI WRPLL metadata
- * @c: WRPLL configuration record to write
- *
- * Write the WRPLL configuration described by @c into the WRPLL
- * configuration register identified by @pwd in the PRCI instance
- * described by @c. Make a cached copy of the WRPLL's current
- * configuration so it can be used by other code.
- *
- * Context: Any context. Caller must prevent the records pointed to by
- * @pd and @pwd from changing during execution.
- */
-static void __prci_wrpll_write_cfg0(struct __prci_data *pd,
- struct __prci_wrpll_data *pwd,
- struct wrpll_cfg *c)
-{
- __prci_writel(__prci_wrpll_pack(c), pwd->cfg0_offs, pd);
-
- memcpy(&pwd->c, c, sizeof(*c));
-}
-
-/**
- * __prci_wrpll_write_cfg1() - write Clock enable/disable configuration
- * into the PRCI
- * @pd: PRCI context
- * @pwd: PRCI WRPLL metadata
- * @enable: Clock enable or disable value
- */
-static void __prci_wrpll_write_cfg1(struct __prci_data *pd,
- struct __prci_wrpll_data *pwd,
- u32 enable)
-{
- __prci_writel(enable, pwd->cfg1_offs, pd);
-}
-
-/* Core clock mux control */
-
-/**
- * __prci_coreclksel_use_hfclk() - switch the CORECLK mux to output HFCLK
- * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
- *
- * Switch the CORECLK mux to the HFCLK input source; return once complete.
- *
- * Context: Any context. Caller must prevent concurrent changes to the
- * PRCI_CORECLKSEL_OFFSET register.
- */
-static void __prci_coreclksel_use_hfclk(struct __prci_data *pd)
-{
- u32 r;
-
- r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
- r |= PRCI_CORECLKSEL_CORECLKSEL_MASK;
- __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
-
- r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
-}
-
-/**
- * __prci_coreclksel_use_corepll() - switch the CORECLK mux to output COREPLL
- * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
- *
- * Switch the CORECLK mux to the PLL output clock; return once complete.
- *
- * Context: Any context. Caller must prevent concurrent changes to the
- * PRCI_CORECLKSEL_OFFSET register.
- */
-static void __prci_coreclksel_use_corepll(struct __prci_data *pd)
-{
- u32 r;
-
- r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
- r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK;
- __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
-
- r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
-}
-
-static unsigned long sifive_fu540_prci_wrpll_recalc_rate(
- struct __prci_clock *pc,
- unsigned long parent_rate)
-{
- struct __prci_wrpll_data *pwd = pc->pwd;
- return wrpll_calc_output_rate(&pwd->c, parent_rate);
-}
-
-static unsigned long sifive_fu540_prci_wrpll_round_rate(
- struct __prci_clock *pc,
- unsigned long rate,
- unsigned long *parent_rate)
-{
- struct __prci_wrpll_data *pwd = pc->pwd;
- struct wrpll_cfg c;
-
- memcpy(&c, &pwd->c, sizeof(c));
-
- wrpll_configure_for_rate(&c, rate, *parent_rate);
-
- return wrpll_calc_output_rate(&c, *parent_rate);
-}
-
-static int sifive_fu540_prci_wrpll_set_rate(struct __prci_clock *pc,
- unsigned long rate,
- unsigned long parent_rate)
-{
- struct __prci_wrpll_data *pwd = pc->pwd;
- struct __prci_data *pd = pc->pd;
- int r;
-
- r = wrpll_configure_for_rate(&pwd->c, rate, parent_rate);
- if (r)
- return r;
-
- if (pwd->enable_bypass)
- pwd->enable_bypass(pd);
-
- __prci_wrpll_write_cfg0(pd, pwd, &pwd->c);
-
- udelay(wrpll_calc_max_lock_us(&pwd->c));
-
- if (pwd->disable_bypass)
- pwd->disable_bypass(pd);
-
- return 0;
-}
-
-static int sifive_fu540_prci_clock_enable(struct __prci_clock *pc, bool enable)
-{
- struct __prci_wrpll_data *pwd = pc->pwd;
- struct __prci_data *pd = pc->pd;
-
- if (enable) {
- __prci_wrpll_write_cfg1(pd, pwd, PRCI_COREPLLCFG1_CKE_MASK);
-
- if (pwd->release_reset)
- pwd->release_reset(pd);
- } else {
- u32 r;
-
- r = __prci_readl(pd, pwd->cfg1_offs);
- r &= ~PRCI_COREPLLCFG1_CKE_MASK;
-
- __prci_wrpll_write_cfg1(pd, pwd, r);
- }
-
- return 0;
-}
-
-static const struct __prci_clock_ops sifive_fu540_prci_wrpll_clk_ops = {
- .set_rate = sifive_fu540_prci_wrpll_set_rate,
- .round_rate = sifive_fu540_prci_wrpll_round_rate,
- .recalc_rate = sifive_fu540_prci_wrpll_recalc_rate,
- .enable_clk = sifive_fu540_prci_clock_enable,
-};
-
-/* TLCLKSEL clock integration */
-
-static unsigned long sifive_fu540_prci_tlclksel_recalc_rate(
- struct __prci_clock *pc,
- unsigned long parent_rate)
-{
- struct __prci_data *pd = pc->pd;
- u32 v;
- u8 div;
-
- v = __prci_readl(pd, PRCI_CLKMUXSTATUSREG_OFFSET);
- v &= PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK;
- div = v ? 1 : 2;
-
- return div_u64(parent_rate, div);
-}
-
-static const struct __prci_clock_ops sifive_fu540_prci_tlclksel_clk_ops = {
- .recalc_rate = sifive_fu540_prci_tlclksel_recalc_rate,
-};
-
-static int __prci_consumer_reset(const char *rst_name, bool trigger)
-{
- struct udevice *dev;
- struct reset_ctl rst_sig;
- int ret;
-
- ret = uclass_get_device_by_driver(UCLASS_RESET,
- DM_DRIVER_GET(sifive_reset),
- &dev);
- if (ret) {
- dev_err(dev, "Reset driver not found: %d\n", ret);
- return ret;
- }
-
- ret = reset_get_by_name(dev, rst_name, &rst_sig);
- if (ret) {
- dev_err(dev, "failed to get %s reset\n", rst_name);
- return ret;
- }
-
- if (reset_valid(&rst_sig)) {
- if (trigger)
- ret = reset_deassert(&rst_sig);
- else
- ret = reset_assert(&rst_sig);
- if (ret) {
- dev_err(dev, "failed to trigger reset id = %ld\n",
- rst_sig.id);
- return ret;
- }
- }
-
- return ret;
-}
-
-/**
- * __prci_ddr_release_reset() - Release DDR reset
- * @pd: struct __prci_data * for the PRCI containing the DDRCLK mux reg
- *
- */
-static void __prci_ddr_release_reset(struct __prci_data *pd)
-{
- /* Release DDR ctrl reset */
- __prci_consumer_reset("ddr_ctrl", true);
-
- /* HACK to get the '1 full controller clock cycle'. */
- asm volatile ("fence");
-
- /* Release DDR AXI reset */
- __prci_consumer_reset("ddr_axi", true);
-
- /* Release DDR AHB reset */
- __prci_consumer_reset("ddr_ahb", true);
-
- /* Release DDR PHY reset */
- __prci_consumer_reset("ddr_phy", true);
-
- /* HACK to get the '1 full controller clock cycle'. */
- asm volatile ("fence");
-
- /*
- * These take like 16 cycles to actually propagate. We can't go sending
- * stuff before they come out of reset. So wait.
- */
- for (int i = 0; i < 256; i++)
- asm volatile ("nop");
-}
-
-/**
- * __prci_ethernet_release_reset() - Release ethernet reset
- * @pd: struct __prci_data * for the PRCI containing the Ethernet CLK mux reg
- *
- */
-static void __prci_ethernet_release_reset(struct __prci_data *pd)
-{
- /* Release GEMGXL reset */
- __prci_consumer_reset("gemgxl_reset", true);
-
- /* Procmon => core clock */
- __prci_writel(PRCI_PROCMONCFG_CORE_CLOCK_MASK, PRCI_PROCMONCFG_OFFSET,
- pd);
-}
-
-/*
- * PRCI integration data for each WRPLL instance
- */
+#include "sifive-prci.h"
+/* PRCI integration data for each WRPLL instance */
static struct __prci_wrpll_data __prci_corepll_data = {
.cfg0_offs = PRCI_COREPLLCFG0_OFFSET,
.cfg1_offs = PRCI_COREPLLCFG1_OFFSET,
- .enable_bypass = __prci_coreclksel_use_hfclk,
- .disable_bypass = __prci_coreclksel_use_corepll,
+ .enable_bypass = sifive_prci_coreclksel_use_hfclk,
+ .disable_bypass = sifive_prci_coreclksel_use_corepll,
};
static struct __prci_wrpll_data __prci_ddrpll_data = {
.cfg0_offs = PRCI_DDRPLLCFG0_OFFSET,
.cfg1_offs = PRCI_DDRPLLCFG1_OFFSET,
- .release_reset = __prci_ddr_release_reset,
+ .release_reset = sifive_prci_ddr_release_reset,
};
static struct __prci_wrpll_data __prci_gemgxlpll_data = {
.cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET,
.cfg1_offs = PRCI_GEMGXLPLLCFG1_OFFSET,
- .release_reset = __prci_ethernet_release_reset,
+ .release_reset = sifive_prci_ethernet_release_reset,
};
-/*
- * List of clock controls provided by the PRCI
- */
+/* Linux clock framework integration */
+static const struct __prci_clock_ops sifive_fu540_prci_wrpll_clk_ops = {
+ .set_rate = sifive_prci_wrpll_set_rate,
+ .round_rate = sifive_prci_wrpll_round_rate,
+ .recalc_rate = sifive_prci_wrpll_recalc_rate,
+ .enable_clk = sifive_prci_clock_enable,
+};
-static struct __prci_clock __prci_init_clocks[] = {
+static const struct __prci_clock_ops sifive_fu540_prci_tlclksel_clk_ops = {
+ .recalc_rate = sifive_prci_tlclksel_recalc_rate,
+};
+
+/* List of clock controls provided by the PRCI */
+struct __prci_clock __prci_init_clocks_fu540[] = {
[PRCI_CLK_COREPLL] = {
.name = "corepll",
.parent_name = "hfclk",
@@ -665,148 +83,3 @@ static struct __prci_clock __prci_init_clocks[] = {
.ops = &sifive_fu540_prci_tlclksel_clk_ops,
},
};
-
-static ulong sifive_fu540_prci_parent_rate(struct __prci_clock *pc)
-{
- ulong parent_rate;
- struct __prci_clock *p;
-
- if (strcmp(pc->parent_name, "corepll") == 0) {
- p = &__prci_init_clocks[PRCI_CLK_COREPLL];
- if (!p->pd || !p->ops->recalc_rate)
- return -ENXIO;
-
- return p->ops->recalc_rate(p, sifive_fu540_prci_parent_rate(p));
- }
-
- if (strcmp(pc->parent_name, "rtcclk") == 0)
- parent_rate = clk_get_rate(&pc->pd->parent_rtcclk);
- else
- parent_rate = clk_get_rate(&pc->pd->parent_hfclk);
-
- return parent_rate;
-}
-
-static ulong sifive_fu540_prci_get_rate(struct clk *clk)
-{
- struct __prci_clock *pc;
-
- if (ARRAY_SIZE(__prci_init_clocks) <= clk->id)
- return -ENXIO;
-
- pc = &__prci_init_clocks[clk->id];
- if (!pc->pd || !pc->ops->recalc_rate)
- return -ENXIO;
-
- return pc->ops->recalc_rate(pc, sifive_fu540_prci_parent_rate(pc));
-}
-
-static ulong sifive_fu540_prci_set_rate(struct clk *clk, ulong rate)
-{
- int err;
- struct __prci_clock *pc;
-
- if (ARRAY_SIZE(__prci_init_clocks) <= clk->id)
- return -ENXIO;
-
- pc = &__prci_init_clocks[clk->id];
- if (!pc->pd || !pc->ops->set_rate)
- return -ENXIO;
-
- err = pc->ops->set_rate(pc, rate, sifive_fu540_prci_parent_rate(pc));
- if (err)
- return err;
-
- return rate;
-}
-
-static int sifive_fu540_prci_enable(struct clk *clk)
-{
- struct __prci_clock *pc;
- int ret = 0;
-
- if (ARRAY_SIZE(__prci_init_clocks) <= clk->id)
- return -ENXIO;
-
- pc = &__prci_init_clocks[clk->id];
- if (!pc->pd)
- return -ENXIO;
-
- if (pc->ops->enable_clk)
- ret = pc->ops->enable_clk(pc, 1);
-
- return ret;
-}
-
-static int sifive_fu540_prci_disable(struct clk *clk)
-{
- struct __prci_clock *pc;
- int ret = 0;
-
- if (ARRAY_SIZE(__prci_init_clocks) <= clk->id)
- return -ENXIO;
-
- pc = &__prci_init_clocks[clk->id];
- if (!pc->pd)
- return -ENXIO;
-
- if (pc->ops->enable_clk)
- ret = pc->ops->enable_clk(pc, 0);
-
- return ret;
-}
-
-static int sifive_fu540_prci_probe(struct udevice *dev)
-{
- int i, err;
- struct __prci_clock *pc;
- struct __prci_data *pd = dev_get_priv(dev);
-
- pd->va = (void *)dev_read_addr(dev);
- if (IS_ERR(pd->va))
- return PTR_ERR(pd->va);
-
- err = clk_get_by_index(dev, 0, &pd->parent_hfclk);
- if (err)
- return err;
-
- err = clk_get_by_index(dev, 1, &pd->parent_rtcclk);
- if (err)
- return err;
-
- for (i = 0; i < ARRAY_SIZE(__prci_init_clocks); ++i) {
- pc = &__prci_init_clocks[i];
- pc->pd = pd;
- if (pc->pwd)
- __prci_wrpll_read_cfg0(pd, pc->pwd);
- }
-
- return 0;
-}
-
-static struct clk_ops sifive_fu540_prci_ops = {
- .set_rate = sifive_fu540_prci_set_rate,
- .get_rate = sifive_fu540_prci_get_rate,
- .enable = sifive_fu540_prci_enable,
- .disable = sifive_fu540_prci_disable,
-};
-
-static int sifive_fu540_clk_bind(struct udevice *dev)
-{
- return sifive_reset_bind(dev, PRCI_DEVICERESETCNT);
-}
-
-static const struct udevice_id sifive_fu540_prci_ids[] = {
- { .compatible = "sifive,fu540-c000-prci" },
- { }
-};
-
-U_BOOT_DRIVER(sifive_fu540_prci) = {
- .name = "sifive-fu540-prci",
- .id = UCLASS_CLK,
- .of_match = sifive_fu540_prci_ids,
- .probe = sifive_fu540_prci_probe,
- .ops = &sifive_fu540_prci_ops,
- .priv_auto = sizeof(struct __prci_data),
- .bind = sifive_fu540_clk_bind,
-};
diff --git a/drivers/clk/sifive/fu540-prci.h b/drivers/clk/sifive/fu540-prci.h
new file mode 100644
index 0000000..1133011
--- /dev/null
+++ b/drivers/clk/sifive/fu540-prci.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc.
+ * Zong Li
+ * Pragnesh Patel
+ */
+
+#ifndef __SIFIVE_CLK_FU540_PRCI_H
+#define __SIFIVE_CLK_FU540_PRCI_H
+
+#include "sifive-prci.h"
+
+#define NUM_CLOCK_FU540 4
+
+extern struct __prci_clock __prci_init_clocks_fu540[NUM_CLOCK_FU540];
+
+static const struct prci_clk_desc prci_clk_fu540 = {
+ .clks = __prci_init_clocks_fu540,
+ .num_clks = ARRAY_SIZE(__prci_init_clocks_fu540),
+};
+
+#endif /* __SIFIVE_CLK_FU540_PRCI_H */
diff --git a/drivers/clk/sifive/fu740-prci.c b/drivers/clk/sifive/fu740-prci.c
new file mode 100644
index 0000000..9a642c1
--- /dev/null
+++ b/drivers/clk/sifive/fu740-prci.c
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018-2021 SiFive, Inc.
+ * Wesley Terpstra
+ * Paul Walmsley
+ * Zong Li
+ * Pragnesh Patel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/clock/sifive-fu740-prci.h>
+#include "sifive-prci.h"
+#include <asm/io.h>
+
+int sifive_prci_fu740_pciauxclk_enable(struct __prci_clock *pc, bool enable)
+{
+ struct __prci_wrpll_data *pwd = pc->pwd;
+ struct __prci_data *pd = pc->pd;
+ u32 v;
+
+ if (pwd->cfg1_offs != PRCI_PCIEAUXCFG1_OFFSET)
+ return -EINVAL;
+
+ v = readl(pd->va + pwd->cfg1_offs);
+ v = enable ? (v | PRCI_PCIEAUXCFG1_MASK) : (v & ~PRCI_PCIEAUXCFG1_MASK);
+ writel(v, pd->va + pwd->cfg1_offs);
+
+ return 0;
+}
+
+/* PRCI integration data for each WRPLL instance */
+static struct __prci_wrpll_data __prci_corepll_data = {
+ .cfg0_offs = PRCI_COREPLLCFG0_OFFSET,
+ .cfg1_offs = PRCI_COREPLLCFG1_OFFSET,
+ .enable_bypass = sifive_prci_coreclksel_use_hfclk,
+ .disable_bypass = sifive_prci_coreclksel_use_final_corepll,
+};
+
+static struct __prci_wrpll_data __prci_ddrpll_data = {
+ .cfg0_offs = PRCI_DDRPLLCFG0_OFFSET,
+ .cfg1_offs = PRCI_DDRPLLCFG1_OFFSET,
+ .release_reset = sifive_prci_ddr_release_reset,
+};
+
+static struct __prci_wrpll_data __prci_gemgxlpll_data = {
+ .cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET,
+ .cfg1_offs = PRCI_GEMGXLPLLCFG1_OFFSET,
+ .release_reset = sifive_prci_ethernet_release_reset,
+};
+
+static struct __prci_wrpll_data __prci_dvfscorepll_data = {
+ .cfg0_offs = PRCI_DVFSCOREPLLCFG0_OFFSET,
+ .cfg1_offs = PRCI_DVFSCOREPLLCFG1_OFFSET,
+ .enable_bypass = sifive_prci_corepllsel_use_corepll,
+ .disable_bypass = sifive_prci_corepllsel_use_dvfscorepll,
+};
+
+static struct __prci_wrpll_data __prci_hfpclkpll_data = {
+ .cfg0_offs = PRCI_HFPCLKPLLCFG0_OFFSET,
+ .cfg1_offs = PRCI_HFPCLKPLLCFG1_OFFSET,
+ .enable_bypass = sifive_prci_hfpclkpllsel_use_hfclk,
+ .disable_bypass = sifive_prci_hfpclkpllsel_use_hfpclkpll,
+};
+
+static struct __prci_wrpll_data __prci_cltxpll_data = {
+ .cfg0_offs = PRCI_CLTXPLLCFG0_OFFSET,
+ .cfg1_offs = PRCI_CLTXPLLCFG1_OFFSET,
+ .release_reset = sifive_prci_cltx_release_reset,
+};
+
+static struct __prci_wrpll_data __prci_pcieaux_data = {
+ .cfg1_offs = PRCI_PCIEAUXCFG1_OFFSET,
+};
+
+/* Linux clock framework integration */
+
+static const struct __prci_clock_ops sifive_fu740_prci_wrpll_clk_ops = {
+ .set_rate = sifive_prci_wrpll_set_rate,
+ .round_rate = sifive_prci_wrpll_round_rate,
+ .recalc_rate = sifive_prci_wrpll_recalc_rate,
+ .enable_clk = sifive_prci_clock_enable,
+};
+
+static const struct __prci_clock_ops sifive_fu740_prci_tlclksel_clk_ops = {
+ .recalc_rate = sifive_prci_tlclksel_recalc_rate,
+};
+
+static const struct __prci_clock_ops sifive_fu740_prci_hfpclkplldiv_clk_ops = {
+ .recalc_rate = sifive_prci_hfpclkplldiv_recalc_rate,
+};
+
+static const struct __prci_clock_ops sifive_fu740_prci_pcieaux_clk_ops = {
+ .enable_clk = sifive_prci_fu740_pciauxclk_enable,
+};
+
+/* List of clock controls provided by the PRCI */
+struct __prci_clock __prci_init_clocks_fu740[] = {
+ [PRCI_CLK_COREPLL] = {
+ .name = "corepll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
+ .pwd = &__prci_corepll_data,
+ },
+ [PRCI_CLK_DDRPLL] = {
+ .name = "ddrpll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
+ .pwd = &__prci_ddrpll_data,
+ },
+ [PRCI_CLK_GEMGXLPLL] = {
+ .name = "gemgxlpll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
+ .pwd = &__prci_gemgxlpll_data,
+ },
+ [PRCI_CLK_DVFSCOREPLL] = {
+ .name = "dvfscorepll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
+ .pwd = &__prci_dvfscorepll_data,
+ },
+ [PRCI_CLK_HFPCLKPLL] = {
+ .name = "hfpclkpll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
+ .pwd = &__prci_hfpclkpll_data,
+ },
+ [PRCI_CLK_CLTXPLL] = {
+ .name = "cltxpll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
+ .pwd = &__prci_cltxpll_data,
+ },
+ [PRCI_CLK_TLCLK] = {
+ .name = "tlclk",
+ .parent_name = "corepll",
+ .ops = &sifive_fu740_prci_tlclksel_clk_ops,
+ },
+ [PRCI_CLK_PCLK] = {
+ .name = "pclk",
+ .parent_name = "hfpclkpll",
+ .ops = &sifive_fu740_prci_hfpclkplldiv_clk_ops,
+ },
+ [PRCI_CLK_PCIEAUX] {
+ .name = "pciaux",
+ .parent_name = "",
+ .ops = &sifive_fu740_prci_pcieaux_clk_ops,
+ .pwd = &__prci_pcieaux_data,
+ }
+};
diff --git a/drivers/clk/sifive/fu740-prci.h b/drivers/clk/sifive/fu740-prci.h
new file mode 100644
index 0000000..b74f078
--- /dev/null
+++ b/drivers/clk/sifive/fu740-prci.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc.
+ * Zong Li
+ * Pragnesh Patel
+ */
+
+#ifndef __SIFIVE_CLK_FU740_PRCI_H
+#define __SIFIVE_CLK_FU740_PRCI_H
+
+#include "sifive-prci.h"
+
+#define NUM_CLOCK_FU740 9
+
+extern struct __prci_clock __prci_init_clocks_fu740[NUM_CLOCK_FU740];
+
+static const struct prci_clk_desc prci_clk_fu740 = {
+ .clks = __prci_init_clocks_fu740,
+ .num_clks = ARRAY_SIZE(__prci_init_clocks_fu740),
+};
+
+#endif /* __SIFIVE_CLK_FU740_PRCI_H */
diff --git a/drivers/clk/sifive/sifive-prci.c b/drivers/clk/sifive/sifive-prci.c
new file mode 100644
index 0000000..cd1acb9
--- /dev/null
+++ b/drivers/clk/sifive/sifive-prci.c
@@ -0,0 +1,733 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018-2021 SiFive, Inc.
+ * Wesley Terpstra
+ * Paul Walmsley
+ * Zong Li
+ * Pragnesh Patel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * The PRCI implements clock and reset control for the SiFive chip.
+ * This driver assumes that it has sole control over all PRCI resources.
+ *
+ * This driver is based on the PRCI driver written by Wesley Terpstra:
+ * https://github.com/riscv/riscv-linux/commit/999529edf517ed75b56659d456d221b2ee56bb60
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <clk.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <reset.h>
+#include <asm/io.h>
+#include <asm/arch/reset.h>
+#include <linux/delay.h>
+#include <linux/math64.h>
+#include <dt-bindings/clock/sifive-fu740-prci.h>
+
+#include "fu540-prci.h"
+#include "fu740-prci.h"
+
+/*
+ * Private functions
+ */
+
+/**
+ * __prci_readl() - read from a PRCI register
+ * @pd: PRCI context
+ * @offs: register offset to read from (in bytes, from PRCI base address)
+ *
+ * Read the register located at offset @offs from the base virtual
+ * address of the PRCI register target described by @pd, and return
+ * the value to the caller.
+ *
+ * Context: Any context.
+ *
+ * Return: the contents of the register described by @pd and @offs.
+ */
+static u32 __prci_readl(struct __prci_data *pd, u32 offs)
+{
+ return readl(pd->va + offs);
+}
+
+static void __prci_writel(u32 v, u32 offs, struct __prci_data *pd)
+{
+ writel(v, pd->va + offs);
+}
+
+/* WRPLL-related private functions */
+
+/**
+ * __prci_wrpll_unpack() - unpack WRPLL configuration registers into parameters
+ * @c: ptr to a struct wrpll_cfg record to write config into
+ * @r: value read from the PRCI PLL configuration register
+ *
+ * Given a value @r read from an FU540 PRCI PLL configuration register,
+ * split it into fields and populate it into the WRPLL configuration record
+ * pointed to by @c.
+ *
+ * The COREPLLCFG0 macros are used below, but the other *PLLCFG0 macros
+ * have the same register layout.
+ *
+ * Context: Any context.
+ */
+static void __prci_wrpll_unpack(struct wrpll_cfg *c, u32 r)
+{
+ u32 v;
+
+ v = r & PRCI_COREPLLCFG0_DIVR_MASK;
+ v >>= PRCI_COREPLLCFG0_DIVR_SHIFT;
+ c->divr = v;
+
+ v = r & PRCI_COREPLLCFG0_DIVF_MASK;
+ v >>= PRCI_COREPLLCFG0_DIVF_SHIFT;
+ c->divf = v;
+
+ v = r & PRCI_COREPLLCFG0_DIVQ_MASK;
+ v >>= PRCI_COREPLLCFG0_DIVQ_SHIFT;
+ c->divq = v;
+
+ v = r & PRCI_COREPLLCFG0_RANGE_MASK;
+ v >>= PRCI_COREPLLCFG0_RANGE_SHIFT;
+ c->range = v;
+
+ c->flags &= (WRPLL_FLAGS_INT_FEEDBACK_MASK |
+ WRPLL_FLAGS_EXT_FEEDBACK_MASK);
+
+ /* external feedback mode not supported */
+ c->flags |= WRPLL_FLAGS_INT_FEEDBACK_MASK;
+}
+
+/**
+ * __prci_wrpll_pack() - pack PLL configuration parameters into a register value
+ * @c: pointer to a struct wrpll_cfg record containing the PLL's cfg
+ *
+ * Using a set of WRPLL configuration values pointed to by @c,
+ * assemble a PRCI PLL configuration register value, and return it to
+ * the caller.
+ *
+ * Context: Any context. Caller must ensure that the contents of the
+ * record pointed to by @c do not change during the execution
+ * of this function.
+ *
+ * Returns: a value suitable for writing into a PRCI PLL configuration
+ * register
+ */
+static u32 __prci_wrpll_pack(const struct wrpll_cfg *c)
+{
+ u32 r = 0;
+
+ r |= c->divr << PRCI_COREPLLCFG0_DIVR_SHIFT;
+ r |= c->divf << PRCI_COREPLLCFG0_DIVF_SHIFT;
+ r |= c->divq << PRCI_COREPLLCFG0_DIVQ_SHIFT;
+ r |= c->range << PRCI_COREPLLCFG0_RANGE_SHIFT;
+
+ /* external feedback mode not supported */
+ r |= PRCI_COREPLLCFG0_FSE_MASK;
+
+ return r;
+}
+
+/**
+ * __prci_wrpll_read_cfg0() - read the WRPLL configuration from the PRCI
+ * @pd: PRCI context
+ * @pwd: PRCI WRPLL metadata
+ *
+ * Read the current configuration of the PLL identified by @pwd from
+ * the PRCI identified by @pd, and store it into the local configuration
+ * cache in @pwd.
+ *
+ * Context: Any context. Caller must prevent the records pointed to by
+ * @pd and @pwd from changing during execution.
+ */
+static void __prci_wrpll_read_cfg0(struct __prci_data *pd,
+ struct __prci_wrpll_data *pwd)
+{
+ __prci_wrpll_unpack(&pwd->c, __prci_readl(pd, pwd->cfg0_offs));
+}
+
+/**
+ * __prci_wrpll_write_cfg0() - write WRPLL configuration into the PRCI
+ * @pd: PRCI context
+ * @pwd: PRCI WRPLL metadata
+ * @c: WRPLL configuration record to write
+ *
+ * Write the WRPLL configuration described by @c into the WRPLL
+ * configuration register identified by @pwd in the PRCI instance
+ * described by @c. Make a cached copy of the WRPLL's current
+ * configuration so it can be used by other code.
+ *
+ * Context: Any context. Caller must prevent the records pointed to by
+ * @pd and @pwd from changing during execution.
+ */
+static void __prci_wrpll_write_cfg0(struct __prci_data *pd,
+ struct __prci_wrpll_data *pwd,
+ struct wrpll_cfg *c)
+{
+ __prci_writel(__prci_wrpll_pack(c), pwd->cfg0_offs, pd);
+
+ memcpy(&pwd->c, c, sizeof(*c));
+}
+
+/**
+ * __prci_wrpll_write_cfg1() - write Clock enable/disable configuration
+ * into the PRCI
+ * @pd: PRCI context
+ * @pwd: PRCI WRPLL metadata
+ * @enable: Clock enable or disable value
+ */
+static void __prci_wrpll_write_cfg1(struct __prci_data *pd,
+ struct __prci_wrpll_data *pwd,
+ u32 enable)
+{
+ __prci_writel(enable, pwd->cfg1_offs, pd);
+}
+
+unsigned long sifive_prci_wrpll_recalc_rate(struct __prci_clock *pc,
+ unsigned long parent_rate)
+{
+ struct __prci_wrpll_data *pwd = pc->pwd;
+
+ return wrpll_calc_output_rate(&pwd->c, parent_rate);
+}
+
+unsigned long sifive_prci_wrpll_round_rate(struct __prci_clock *pc,
+ unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct __prci_wrpll_data *pwd = pc->pwd;
+ struct wrpll_cfg c;
+
+ memcpy(&c, &pwd->c, sizeof(c));
+
+ wrpll_configure_for_rate(&c, rate, *parent_rate);
+
+ return wrpll_calc_output_rate(&c, *parent_rate);
+}
+
+int sifive_prci_wrpll_set_rate(struct __prci_clock *pc,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct __prci_wrpll_data *pwd = pc->pwd;
+ struct __prci_data *pd = pc->pd;
+ int r;
+
+ r = wrpll_configure_for_rate(&pwd->c, rate, parent_rate);
+ if (r)
+ return r;
+
+ if (pwd->enable_bypass)
+ pwd->enable_bypass(pd);
+
+ __prci_wrpll_write_cfg0(pd, pwd, &pwd->c);
+
+ udelay(wrpll_calc_max_lock_us(&pwd->c));
+
+ return 0;
+}
+
+int sifive_prci_clock_enable(struct __prci_clock *pc, bool enable)
+{
+ struct __prci_wrpll_data *pwd = pc->pwd;
+ struct __prci_data *pd = pc->pd;
+
+ if (enable) {
+ __prci_wrpll_write_cfg1(pd, pwd, PRCI_COREPLLCFG1_CKE_MASK);
+
+ if (pwd->disable_bypass)
+ pwd->disable_bypass(pd);
+
+ if (pwd->release_reset)
+ pwd->release_reset(pd);
+ } else {
+ u32 r;
+
+ if (pwd->enable_bypass)
+ pwd->enable_bypass(pd);
+
+ r = __prci_readl(pd, pwd->cfg1_offs);
+ r &= ~PRCI_COREPLLCFG1_CKE_MASK;
+
+ __prci_wrpll_write_cfg1(pd, pwd, r);
+ }
+
+ return 0;
+}
+
+/* TLCLKSEL clock integration */
+
+unsigned long sifive_prci_tlclksel_recalc_rate(struct __prci_clock *pc,
+ unsigned long parent_rate)
+{
+ struct __prci_data *pd = pc->pd;
+ u32 v;
+ u8 div;
+
+ v = __prci_readl(pd, PRCI_CLKMUXSTATUSREG_OFFSET);
+ v &= PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK;
+ div = v ? 1 : 2;
+
+ return div_u64(parent_rate, div);
+}
+
+/* HFPCLK clock integration */
+
+unsigned long sifive_prci_hfpclkplldiv_recalc_rate(struct __prci_clock *pc,
+ unsigned long parent_rate)
+{
+ struct __prci_data *pd = pc->pd;
+ u32 div = __prci_readl(pd, PRCI_HFPCLKPLLDIV_OFFSET);
+
+ return div_u64(parent_rate, div + 2);
+}
+
+/**
+ * sifive_prci_coreclksel_use_final_corepll() - switch the CORECLK mux to output
+ * FINAL_COREPLL
+ * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
+ *
+ * Switch the CORECLK mux to the final COREPLL output clock; return once
+ * complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_CORECLKSEL_OFFSET register.
+ */
+void sifive_prci_coreclksel_use_final_corepll(struct __prci_data *pd)
+{
+ u32 r;
+
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
+ r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK;
+ __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
+
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
+}
+
+/**
+ * sifive_prci_corepllsel_use_dvfscorepll() - switch the COREPLL mux to
+ * output DVFS_COREPLL
+ * @pd: struct __prci_data * for the PRCI containing the COREPLL mux reg
+ *
+ * Switch the COREPLL mux to the DVFSCOREPLL output clock; return once complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_COREPLLSEL_OFFSET register.
+ */
+void sifive_prci_corepllsel_use_dvfscorepll(struct __prci_data *pd)
+{
+ u32 r;
+
+ r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET);
+ r |= PRCI_COREPLLSEL_COREPLLSEL_MASK;
+ __prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd);
+
+ r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); /* barrier */
+}
+
+/**
+ * sifive_prci_corepllsel_use_corepll() - switch the COREPLL mux to
+ * output COREPLL
+ * @pd: struct __prci_data * for the PRCI containing the COREPLL mux reg
+ *
+ * Switch the COREPLL mux to the COREPLL output clock; return once complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_COREPLLSEL_OFFSET register.
+ */
+void sifive_prci_corepllsel_use_corepll(struct __prci_data *pd)
+{
+ u32 r;
+
+ r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET);
+ r &= ~PRCI_COREPLLSEL_COREPLLSEL_MASK;
+ __prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd);
+
+ r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); /* barrier */
+}
+
+/**
+ * sifive_prci_hfpclkpllsel_use_hfclk() - switch the HFPCLKPLL mux to
+ * output HFCLK
+ * @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux reg
+ *
+ * Switch the HFPCLKPLL mux to the HFCLK input source; return once complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_HFPCLKPLLSEL_OFFSET register.
+ */
+void sifive_prci_hfpclkpllsel_use_hfclk(struct __prci_data *pd)
+{
+ u32 r;
+
+ r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET);
+ r |= PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK;
+ __prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd);
+
+ r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */
+}
+
+/**
+ * sifive_prci_hfpclkpllsel_use_hfpclkpll() - switch the HFPCLKPLL mux to
+ * output HFPCLKPLL
+ * @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux reg
+ *
+ * Switch the HFPCLKPLL mux to the HFPCLKPLL output clock; return once complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_HFPCLKPLLSEL_OFFSET register.
+ */
+void sifive_prci_hfpclkpllsel_use_hfpclkpll(struct __prci_data *pd)
+{
+ u32 r;
+
+ r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET);
+ r &= ~PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK;
+ __prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd);
+
+ r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */
+}
+
+static int __prci_consumer_reset(const char *rst_name, bool trigger)
+{
+ struct udevice *dev;
+ struct reset_ctl rst_sig;
+ int ret;
+
+ ret = uclass_get_device_by_driver(UCLASS_RESET,
+ DM_DRIVER_GET(sifive_reset),
+ &dev);
+ if (ret) {
+ dev_err(dev, "Reset driver not found: %d\n", ret);
+ return ret;
+ }
+
+ ret = reset_get_by_name(dev, rst_name, &rst_sig);
+ if (ret) {
+ dev_err(dev, "failed to get %s reset\n", rst_name);
+ return ret;
+ }
+
+ if (reset_valid(&rst_sig)) {
+ if (trigger)
+ ret = reset_deassert(&rst_sig);
+ else
+ ret = reset_assert(&rst_sig);
+ if (ret) {
+ dev_err(dev, "failed to trigger reset id = %ld\n",
+ rst_sig.id);
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+/**
+ * sifive_prci_ddr_release_reset() - Release DDR reset
+ * @pd: struct __prci_data * for the PRCI containing the DDRCLK mux reg
+ *
+ */
+void sifive_prci_ddr_release_reset(struct __prci_data *pd)
+{
+ /* Release DDR ctrl reset */
+ __prci_consumer_reset("ddr_ctrl", true);
+
+ /* HACK to get the '1 full controller clock cycle'. */
+ asm volatile ("fence");
+
+ /* Release DDR AXI reset */
+ __prci_consumer_reset("ddr_axi", true);
+
+ /* Release DDR AHB reset */
+ __prci_consumer_reset("ddr_ahb", true);
+
+ /* Release DDR PHY reset */
+ __prci_consumer_reset("ddr_phy", true);
+
+ /* HACK to get the '1 full controller clock cycle'. */
+ asm volatile ("fence");
+
+ /*
+ * These take like 16 cycles to actually propagate. We can't go sending
+ * stuff before they come out of reset. So wait.
+ */
+ for (int i = 0; i < 256; i++)
+ asm volatile ("nop");
+}
+
+/**
+ * sifive_prci_ethernet_release_reset() - Release ethernet reset
+ * @pd: struct __prci_data * for the PRCI containing the Ethernet CLK mux reg
+ *
+ */
+void sifive_prci_ethernet_release_reset(struct __prci_data *pd)
+{
+ /* Release GEMGXL reset */
+ __prci_consumer_reset("gemgxl_reset", true);
+
+ /* Procmon => core clock */
+ __prci_writel(PRCI_PROCMONCFG_CORE_CLOCK_MASK, PRCI_PROCMONCFG_OFFSET,
+ pd);
+
+ /* Release Chiplink reset */
+ __prci_consumer_reset("cltx_reset", true);
+}
+
+/**
+ * sifive_prci_cltx_release_reset() - Release cltx reset
+ * @pd: struct __prci_data * for the PRCI containing the Ethernet CLK mux reg
+ *
+ */
+void sifive_prci_cltx_release_reset(struct __prci_data *pd)
+{
+ /* Release CLTX reset */
+ __prci_consumer_reset("cltx_reset", true);
+}
+
+/* Core clock mux control */
+
+/**
+ * sifive_prci_coreclksel_use_hfclk() - switch the CORECLK mux to output HFCLK
+ * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
+ *
+ * Switch the CORECLK mux to the HFCLK input source; return once complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_CORECLKSEL_OFFSET register.
+ */
+void sifive_prci_coreclksel_use_hfclk(struct __prci_data *pd)
+{
+ u32 r;
+
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
+ r |= PRCI_CORECLKSEL_CORECLKSEL_MASK;
+ __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
+
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
+}
+
+/**
+ * sifive_prci_coreclksel_use_corepll() - switch the CORECLK mux to output COREPLL
+ * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
+ *
+ * Switch the CORECLK mux to the PLL output clock; return once complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_CORECLKSEL_OFFSET register.
+ */
+void sifive_prci_coreclksel_use_corepll(struct __prci_data *pd)
+{
+ u32 r;
+
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
+ r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK;
+ __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
+
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
+}
+
+static ulong sifive_prci_parent_rate(struct __prci_clock *pc, struct prci_clk_desc *data)
+{
+ ulong parent_rate;
+ ulong i;
+ struct __prci_clock *p;
+
+ if (strcmp(pc->parent_name, "corepll") == 0 ||
+ strcmp(pc->parent_name, "hfpclkpll") == 0) {
+ for (i = 0; i < data->num_clks; i++) {
+ if (strcmp(pc->parent_name, data->clks[i].name) == 0)
+ break;
+ }
+
+ if (i >= data->num_clks)
+ return -ENXIO;
+
+ p = &data->clks[i];
+ if (!p->pd || !p->ops->recalc_rate)
+ return -ENXIO;
+
+ return p->ops->recalc_rate(p, sifive_prci_parent_rate(p, data));
+ }
+
+ if (strcmp(pc->parent_name, "rtcclk") == 0)
+ parent_rate = clk_get_rate(&pc->pd->parent_rtcclk);
+ else
+ parent_rate = clk_get_rate(&pc->pd->parent_hfclk);
+
+ return parent_rate;
+}
+
+static ulong sifive_prci_get_rate(struct clk *clk)
+{
+ struct __prci_clock *pc;
+ struct prci_clk_desc *data =
+ (struct prci_clk_desc *)dev_get_driver_data(clk->dev);
+
+ if (data->num_clks <= clk->id)
+ return -ENXIO;
+
+ pc = &data->clks[clk->id];
+ if (!pc->pd || !pc->ops->recalc_rate)
+ return -ENXIO;
+
+ return pc->ops->recalc_rate(pc, sifive_prci_parent_rate(pc, data));
+}
+
+static ulong sifive_prci_set_rate(struct clk *clk, ulong rate)
+{
+ int err;
+ struct __prci_clock *pc;
+ struct prci_clk_desc *data =
+ (struct prci_clk_desc *)dev_get_driver_data(clk->dev);
+
+ if (data->num_clks <= clk->id)
+ return -ENXIO;
+
+ pc = &data->clks[clk->id];
+ if (!pc->pd || !pc->ops->set_rate)
+ return -ENXIO;
+
+ err = pc->ops->set_rate(pc, rate, sifive_prci_parent_rate(pc, data));
+ if (err)
+ return err;
+
+ return rate;
+}
+
+static int sifive_prci_enable(struct clk *clk)
+{
+ struct __prci_clock *pc;
+ int ret = 0;
+ struct prci_clk_desc *data =
+ (struct prci_clk_desc *)dev_get_driver_data(clk->dev);
+
+ if (data->num_clks <= clk->id)
+ return -ENXIO;
+
+ pc = &data->clks[clk->id];
+ if (!pc->pd)
+ return -ENXIO;
+
+ if (pc->ops->enable_clk)
+ ret = pc->ops->enable_clk(pc, 1);
+
+ return ret;
+}
+
+static int sifive_prci_disable(struct clk *clk)
+{
+ struct __prci_clock *pc;
+ int ret = 0;
+ struct prci_clk_desc *data =
+ (struct prci_clk_desc *)dev_get_driver_data(clk->dev);
+
+ if (data->num_clks <= clk->id)
+ return -ENXIO;
+
+ pc = &data->clks[clk->id];
+ if (!pc->pd)
+ return -ENXIO;
+
+ if (pc->ops->enable_clk)
+ ret = pc->ops->enable_clk(pc, 0);
+
+ return ret;
+}
+
+static int sifive_prci_probe(struct udevice *dev)
+{
+ int i, err;
+ struct __prci_clock *pc;
+ struct __prci_data *pd = dev_get_priv(dev);
+
+ struct prci_clk_desc *data =
+ (struct prci_clk_desc *)dev_get_driver_data(dev);
+
+ pd->va = (void *)dev_read_addr(dev);
+ if (IS_ERR(pd->va))
+ return PTR_ERR(pd->va);
+
+ err = clk_get_by_index(dev, 0, &pd->parent_hfclk);
+ if (err)
+ return err;
+
+ err = clk_get_by_index(dev, 1, &pd->parent_rtcclk);
+ if (err)
+ return err;
+
+ for (i = 0; i < data->num_clks; ++i) {
+ pc = &data->clks[i];
+ pc->pd = pd;
+ if (pc->pwd)
+ __prci_wrpll_read_cfg0(pd, pc->pwd);
+ }
+
+ if (IS_ENABLED(CONFIG_SPL_BUILD)) {
+ if (device_is_compatible(dev, "sifive,fu740-c000-prci")) {
+ u32 prci_pll_reg;
+ unsigned long parent_rate;
+
+ prci_pll_reg = readl(pd->va + PRCI_PRCIPLL_OFFSET);
+
+ if (prci_pll_reg & PRCI_PRCIPLL_HFPCLKPLL) {
+ /*
+ * Only initialize the HFPCLK PLL. In this
+ * case the design uses hfpclk to drive
+ * Chiplink
+ */
+ pc = &data->clks[PRCI_CLK_HFPCLKPLL];
+ parent_rate = sifive_prci_parent_rate(pc, data);
+ sifive_prci_wrpll_set_rate(pc, 260000000,
+ parent_rate);
+ pc->ops->enable_clk(pc, 1);
+ } else if (prci_pll_reg & PRCI_PRCIPLL_CLTXPLL) {
+ /* CLTX pll init */
+ pc = &data->clks[PRCI_CLK_CLTXPLL];
+ parent_rate = sifive_prci_parent_rate(pc, data);
+ sifive_prci_wrpll_set_rate(pc, 260000000,
+ parent_rate);
+ pc->ops->enable_clk(pc, 1);
+ }
+ }
+ }
+
+ return 0;
+}
+
+static struct clk_ops sifive_prci_ops = {
+ .set_rate = sifive_prci_set_rate,
+ .get_rate = sifive_prci_get_rate,
+ .enable = sifive_prci_enable,
+ .disable = sifive_prci_disable,
+};
+
+static int sifive_clk_bind(struct udevice *dev)
+{
+ return sifive_reset_bind(dev, PRCI_DEVICERESETCNT);
+}
+
+static const struct udevice_id sifive_prci_ids[] = {
+ { .compatible = "sifive,fu540-c000-prci", .data = (ulong)&prci_clk_fu540 },
+ { .compatible = "sifive,fu740-c000-prci", .data = (ulong)&prci_clk_fu740 },
+ { }
+};
+
+U_BOOT_DRIVER(sifive_prci) = {
+ .name = "sifive-prci",
+ .id = UCLASS_CLK,
+ .of_match = sifive_prci_ids,
+ .probe = sifive_prci_probe,
+ .ops = &sifive_prci_ops,
+ .priv_auto = sizeof(struct __prci_data),
+ .bind = sifive_clk_bind,
+};
diff --git a/drivers/clk/sifive/sifive-prci.h b/drivers/clk/sifive/sifive-prci.h
new file mode 100644
index 0000000..5ce33d6
--- /dev/null
+++ b/drivers/clk/sifive/sifive-prci.h
@@ -0,0 +1,323 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc.
+ * Wesley Terpstra
+ * Paul Walmsley
+ * Zong Li
+ * Pragnesh Patel
+ */
+
+#ifndef __SIFIVE_CLK_SIFIVE_PRCI_H
+#define __SIFIVE_CLK_SIFIVE_PRCI_H
+
+#include <clk.h>
+#include <linux/clk/analogbits-wrpll-cln28hpc.h>
+
+/*
+ * EXPECTED_CLK_PARENT_COUNT: how many parent clocks this driver expects:
+ * hfclk and rtcclk
+ */
+#define EXPECTED_CLK_PARENT_COUNT 2
+
+/*
+ * Register offsets and bitmasks
+ */
+
+/* COREPLLCFG0 */
+#define PRCI_COREPLLCFG0_OFFSET 0x4
+#define PRCI_COREPLLCFG0_DIVR_SHIFT 0
+#define PRCI_COREPLLCFG0_DIVR_MASK (0x3f << PRCI_COREPLLCFG0_DIVR_SHIFT)
+#define PRCI_COREPLLCFG0_DIVF_SHIFT 6
+#define PRCI_COREPLLCFG0_DIVF_MASK (0x1ff << PRCI_COREPLLCFG0_DIVF_SHIFT)
+#define PRCI_COREPLLCFG0_DIVQ_SHIFT 15
+#define PRCI_COREPLLCFG0_DIVQ_MASK (0x7 << PRCI_COREPLLCFG0_DIVQ_SHIFT)
+#define PRCI_COREPLLCFG0_RANGE_SHIFT 18
+#define PRCI_COREPLLCFG0_RANGE_MASK (0x7 << PRCI_COREPLLCFG0_RANGE_SHIFT)
+#define PRCI_COREPLLCFG0_BYPASS_SHIFT 24
+#define PRCI_COREPLLCFG0_BYPASS_MASK (0x1 << PRCI_COREPLLCFG0_BYPASS_SHIFT)
+#define PRCI_COREPLLCFG0_FSE_SHIFT 25
+#define PRCI_COREPLLCFG0_FSE_MASK (0x1 << PRCI_COREPLLCFG0_FSE_SHIFT)
+#define PRCI_COREPLLCFG0_LOCK_SHIFT 31
+#define PRCI_COREPLLCFG0_LOCK_MASK (0x1 << PRCI_COREPLLCFG0_LOCK_SHIFT)
+
+/* COREPLLCFG1 */
+#define PRCI_COREPLLCFG1_OFFSET 0x8
+#define PRCI_COREPLLCFG1_CKE_SHIFT 31
+#define PRCI_COREPLLCFG1_CKE_MASK (0x1 << PRCI_COREPLLCFG1_CKE_SHIFT)
+
+/* DDRPLLCFG0 */
+#define PRCI_DDRPLLCFG0_OFFSET 0xc
+#define PRCI_DDRPLLCFG0_DIVR_SHIFT 0
+#define PRCI_DDRPLLCFG0_DIVR_MASK (0x3f << PRCI_DDRPLLCFG0_DIVR_SHIFT)
+#define PRCI_DDRPLLCFG0_DIVF_SHIFT 6
+#define PRCI_DDRPLLCFG0_DIVF_MASK (0x1ff << PRCI_DDRPLLCFG0_DIVF_SHIFT)
+#define PRCI_DDRPLLCFG0_DIVQ_SHIFT 15
+#define PRCI_DDRPLLCFG0_DIVQ_MASK (0x7 << PRCI_DDRPLLCFG0_DIVQ_SHIFT)
+#define PRCI_DDRPLLCFG0_RANGE_SHIFT 18
+#define PRCI_DDRPLLCFG0_RANGE_MASK (0x7 << PRCI_DDRPLLCFG0_RANGE_SHIFT)
+#define PRCI_DDRPLLCFG0_BYPASS_SHIFT 24
+#define PRCI_DDRPLLCFG0_BYPASS_MASK (0x1 << PRCI_DDRPLLCFG0_BYPASS_SHIFT)
+#define PRCI_DDRPLLCFG0_FSE_SHIFT 25
+#define PRCI_DDRPLLCFG0_FSE_MASK (0x1 << PRCI_DDRPLLCFG0_FSE_SHIFT)
+#define PRCI_DDRPLLCFG0_LOCK_SHIFT 31
+#define PRCI_DDRPLLCFG0_LOCK_MASK (0x1 << PRCI_DDRPLLCFG0_LOCK_SHIFT)
+
+/* DDRPLLCFG1 */
+#define PRCI_DDRPLLCFG1_OFFSET 0x10
+#define PRCI_DDRPLLCFG1_CKE_SHIFT 31
+#define PRCI_DDRPLLCFG1_CKE_MASK (0x1 << PRCI_DDRPLLCFG1_CKE_SHIFT)
+
+/* PCIEAUXCFG1 */
+#define PRCI_PCIEAUXCFG1_OFFSET 0x14
+#define PRCI_PCIEAUXCFG1_SHIFT 0
+#define PRCI_PCIEAUXCFG1_MASK (0x1 << PRCI_PCIEAUXCFG1_SHIFT)
+
+/* GEMGXLPLLCFG0 */
+#define PRCI_GEMGXLPLLCFG0_OFFSET 0x1c
+#define PRCI_GEMGXLPLLCFG0_DIVR_SHIFT 0
+#define PRCI_GEMGXLPLLCFG0_DIVR_MASK \
+ (0x3f << PRCI_GEMGXLPLLCFG0_DIVR_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_DIVF_SHIFT 6
+#define PRCI_GEMGXLPLLCFG0_DIVF_MASK \
+ (0x1ff << PRCI_GEMGXLPLLCFG0_DIVF_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT 15
+#define PRCI_GEMGXLPLLCFG0_DIVQ_MASK (0x7 << PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_RANGE_SHIFT 18
+#define PRCI_GEMGXLPLLCFG0_RANGE_MASK \
+ (0x7 << PRCI_GEMGXLPLLCFG0_RANGE_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT 24
+#define PRCI_GEMGXLPLLCFG0_BYPASS_MASK \
+ (0x1 << PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_FSE_SHIFT 25
+#define PRCI_GEMGXLPLLCFG0_FSE_MASK \
+ (0x1 << PRCI_GEMGXLPLLCFG0_FSE_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_LOCK_SHIFT 31
+#define PRCI_GEMGXLPLLCFG0_LOCK_MASK (0x1 << PRCI_GEMGXLPLLCFG0_LOCK_SHIFT)
+
+/* GEMGXLPLLCFG1 */
+#define PRCI_GEMGXLPLLCFG1_OFFSET 0x20
+#define PRCI_GEMGXLPLLCFG1_CKE_SHIFT 31
+#define PRCI_GEMGXLPLLCFG1_CKE_MASK (0x1 << PRCI_GEMGXLPLLCFG1_CKE_SHIFT)
+
+/* CORECLKSEL */
+#define PRCI_CORECLKSEL_OFFSET 0x24
+#define PRCI_CORECLKSEL_CORECLKSEL_SHIFT 0
+#define PRCI_CORECLKSEL_CORECLKSEL_MASK \
+ (0x1 << PRCI_CORECLKSEL_CORECLKSEL_SHIFT)
+
+/* DEVICESRESETREG */
+#define PRCI_DEVICESRESETREG_OFFSET 0x28
+#define PRCI_DEVICERESETCNT 6
+
+/* CLKMUXSTATUSREG */
+#define PRCI_CLKMUXSTATUSREG_OFFSET 0x2c
+#define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT 1
+#define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK \
+ (0x1 << PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT)
+
+/* CLTXPLLCFG0 */
+#define PRCI_CLTXPLLCFG0_OFFSET 0x30
+#define PRCI_CLTXPLLCFG0_DIVR_SHIFT 0
+#define PRCI_CLTXPLLCFG0_DIVR_MASK (0x3f << PRCI_CLTXPLLCFG0_DIVR_SHIFT)
+#define PRCI_CLTXPLLCFG0_DIVF_SHIFT 6
+#define PRCI_CLTXPLLCFG0_DIVF_MASK (0x1ff << PRCI_CLTXPLLCFG0_DIVF_SHIFT)
+#define PRCI_CLTXPLLCFG0_DIVQ_SHIFT 15
+#define PRCI_CLTXPLLCFG0_DIVQ_MASK (0x7 << PRCI_CLTXPLLCFG0_DIVQ_SHIFT)
+#define PRCI_CLTXPLLCFG0_RANGE_SHIFT 18
+#define PRCI_CLTXPLLCFG0_RANGE_MASK (0x7 << PRCI_CLTXPLLCFG0_RANGE_SHIFT)
+#define PRCI_CLTXPLLCFG0_BYPASS_SHIFT 24
+#define PRCI_CLTXPLLCFG0_BYPASS_MASK (0x1 << PRCI_CLTXPLLCFG0_BYPASS_SHIFT)
+#define PRCI_CLTXPLLCFG0_FSE_SHIFT 25
+#define PRCI_CLTXPLLCFG0_FSE_MASK (0x1 << PRCI_CLTXPLLCFG0_FSE_SHIFT)
+#define PRCI_CLTXPLLCFG0_LOCK_SHIFT 31
+#define PRCI_CLTXPLLCFG0_LOCK_MASK (0x1 << PRCI_CLTXPLLCFG0_LOCK_SHIFT)
+
+/* CLTXPLLCFG1 */
+#define PRCI_CLTXPLLCFG1_OFFSET 0x34
+#define PRCI_CLTXPLLCFG1_CKE_SHIFT 24
+#define PRCI_CLTXPLLCFG1_CKE_MASK (0x1 << PRCI_CLTXPLLCFG1_CKE_SHIFT)
+
+/* DVFSCOREPLLCFG0 */
+#define PRCI_DVFSCOREPLLCFG0_OFFSET 0x38
+
+/* DVFSCOREPLLCFG1 */
+#define PRCI_DVFSCOREPLLCFG1_OFFSET 0x3c
+#define PRCI_DVFSCOREPLLCFG1_CKE_SHIFT 24
+#define PRCI_DVFSCOREPLLCFG1_CKE_MASK (0x1 << PRCI_DVFSCOREPLLCFG1_CKE_SHIFT)
+
+/* COREPLLSEL */
+#define PRCI_COREPLLSEL_OFFSET 0x40
+#define PRCI_COREPLLSEL_COREPLLSEL_SHIFT 0
+#define PRCI_COREPLLSEL_COREPLLSEL_MASK \
+ (0x1 << PRCI_COREPLLSEL_COREPLLSEL_SHIFT)
+
+/* HFPCLKPLLCFG0 */
+#define PRCI_HFPCLKPLLCFG0_OFFSET 0x50
+#define PRCI_HFPCLKPLL_CFG0_DIVR_SHIFT 0
+#define PRCI_HFPCLKPLL_CFG0_DIVR_MASK \
+ (0x3f << PRCI_HFPCLKPLLCFG0_DIVR_SHIFT)
+#define PRCI_HFPCLKPLL_CFG0_DIVF_SHIFT 6
+#define PRCI_HFPCLKPLL_CFG0_DIVF_MASK \
+ (0x1ff << PRCI_HFPCLKPLLCFG0_DIVF_SHIFT)
+#define PRCI_HFPCLKPLL_CFG0_DIVQ_SHIFT 15
+#define PRCI_HFPCLKPLL_CFG0_DIVQ_MASK \
+ (0x7 << PRCI_HFPCLKPLLCFG0_DIVQ_SHIFT)
+#define PRCI_HFPCLKPLL_CFG0_RANGE_SHIFT 18
+#define PRCI_HFPCLKPLL_CFG0_RANGE_MASK \
+ (0x7 << PRCI_HFPCLKPLLCFG0_RANGE_SHIFT)
+#define PRCI_HFPCLKPLL_CFG0_BYPASS_SHIFT 24
+#define PRCI_HFPCLKPLL_CFG0_BYPASS_MASK \
+ (0x1 << PRCI_HFPCLKPLLCFG0_BYPASS_SHIFT)
+#define PRCI_HFPCLKPLL_CFG0_FSE_SHIFT 25
+#define PRCI_HFPCLKPLL_CFG0_FSE_MASK \
+ (0x1 << PRCI_HFPCLKPLLCFG0_FSE_SHIFT)
+#define PRCI_HFPCLKPLL_CFG0_LOCK_SHIFT 31
+#define PRCI_HFPCLKPLL_CFG0_LOCK_MASK \
+ (0x1 << PRCI_HFPCLKPLLCFG0_LOCK_SHIFT)
+
+/* HFPCLKPLLCFG1 */
+#define PRCI_HFPCLKPLLCFG1_OFFSET 0x54
+#define PRCI_HFPCLKPLLCFG1_CKE_SHIFT 24
+#define PRCI_HFPCLKPLLCFG1_CKE_MASK \
+ (0x1 << PRCI_HFPCLKPLLCFG1_CKE_SHIFT)
+
+/* HFPCLKPLLSEL */
+#define PRCI_HFPCLKPLLSEL_OFFSET 0x58
+#define PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_SHIFT 0
+#define PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK \
+ (0x1 << PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_SHIFT)
+
+/* HFPCLKPLLDIV */
+#define PRCI_HFPCLKPLLDIV_OFFSET 0x5c
+
+/* PRCIPLL */
+#define PRCI_PRCIPLL_OFFSET 0xe0
+
+#define PRCI_PRCIPLL_CLTXPLL (0x1 << 0)
+#define PRCI_PRCIPLL_GEMGXLPLL (0x1 << 1)
+#define PRCI_PRCIPLL_DDRPLL (0x1 << 2)
+#define PRCI_PRCIPLL_HFPCLKPLL (0x1 << 3)
+#define PRCI_PRCIPLL_DVFSCOREPLL (0x1 << 4)
+#define PRCI_PRCIPLL_COREPLL (0x1 << 5)
+
+/* PROCMONCFG */
+#define PRCI_PROCMONCFG_OFFSET 0xF0
+#define PRCI_PROCMONCFG_CORE_CLOCK_SHIFT 24
+#define PRCI_PROCMONCFG_CORE_CLOCK_MASK \
+ (0x1 << PRCI_PROCMONCFG_CORE_CLOCK_SHIFT)
+
+/*
+ * Private structures
+ */
+
+/**
+ * struct __prci_data - per-device-instance data
+ * @va: base virtual address of the PRCI IP block
+ * @parent: parent clk instance
+ *
+ * PRCI per-device instance data
+ */
+struct __prci_data {
+ void *va;
+ struct clk parent_hfclk;
+ struct clk parent_rtcclk;
+};
+
+/**
+ * struct __prci_wrpll_data - WRPLL configuration and integration data
+ * @c: WRPLL current configuration record
+ * @enable_bypass: fn ptr to code to bypass the WRPLL (if applicable; else NULL)
+ * @disable_bypass: fn ptr to code to not bypass the WRPLL (or NULL)
+ * @cfg0_offs: WRPLL CFG0 register offset (in bytes) from the PRCI base address
+ * @cfg1_offs: WRPLL CFG1 register offset (in bytes) from the PRCI base address
+ * @release_reset: fn ptr to code to release clock reset
+ *
+ * @enable_bypass and @disable_bypass are used for WRPLL instances
+ * that contain a separate external glitchless clock mux downstream
+ * from the PLL. The WRPLL internal bypass mux is not glitchless.
+ */
+struct __prci_wrpll_data {
+ struct wrpll_cfg c;
+ void (*enable_bypass)(struct __prci_data *pd);
+ void (*disable_bypass)(struct __prci_data *pd);
+ u8 cfg0_offs;
+ u8 cfg1_offs;
+ void (*release_reset)(struct __prci_data *pd);
+};
+
+/**
+ * struct __prci_clock - describes a clock device managed by PRCI
+ * @name: user-readable clock name string - should match the manual
+ * @parent_name: parent name for this clock
+ * @ops: struct __prci_clock_ops for control
+ * @pwd: WRPLL-specific data, associated with this clock (if not NULL)
+ * @pd: PRCI-specific data associated with this clock (if not NULL)
+ *
+ * PRCI clock data. Used by the PRCI driver to register PRCI-provided
+ * clocks to the Linux clock infrastructure.
+ */
+struct __prci_clock {
+ const char *name;
+ const char *parent_name;
+ const struct __prci_clock_ops *ops;
+ struct __prci_wrpll_data *pwd;
+ struct __prci_data *pd;
+};
+
+/* struct __prci_clock_ops - clock operations */
+struct __prci_clock_ops {
+ int (*set_rate)(struct __prci_clock *pc,
+ unsigned long rate,
+ unsigned long parent_rate);
+ unsigned long (*round_rate)(struct __prci_clock *pc,
+ unsigned long rate,
+ unsigned long *parent_rate);
+ unsigned long (*recalc_rate)(struct __prci_clock *pc,
+ unsigned long parent_rate);
+ int (*enable_clk)(struct __prci_clock *pc, bool enable);
+};
+
+/*
+ * struct prci_clk_desc - describes the information of clocks of each SoCs
+ * @clks: point to a array of __prci_clock
+ * @num_clks: the number of element of clks
+ */
+struct prci_clk_desc {
+ struct __prci_clock *clks;
+ size_t num_clks;
+};
+
+void sifive_prci_ethernet_release_reset(struct __prci_data *pd);
+void sifive_prci_ddr_release_reset(struct __prci_data *pd);
+void sifive_prci_cltx_release_reset(struct __prci_data *pd);
+
+/* Core clock mux control */
+void sifive_prci_coreclksel_use_hfclk(struct __prci_data *pd);
+void sifive_prci_coreclksel_use_corepll(struct __prci_data *pd);
+void sifive_prci_coreclksel_use_final_corepll(struct __prci_data *pd);
+void sifive_prci_corepllsel_use_dvfscorepll(struct __prci_data *pd);
+void sifive_prci_corepllsel_use_corepll(struct __prci_data *pd);
+void sifive_prci_hfpclkpllsel_use_hfclk(struct __prci_data *pd);
+void sifive_prci_hfpclkpllsel_use_hfpclkpll(struct __prci_data *pd);
+
+unsigned long sifive_prci_wrpll_round_rate(struct __prci_clock *pc,
+ unsigned long rate,
+ unsigned long *parent_rate);
+
+/* Linux clock framework integration */
+int sifive_prci_wrpll_set_rate(struct __prci_clock *pc,
+ unsigned long rate,
+ unsigned long parent_rate);
+
+unsigned long sifive_prci_wrpll_recalc_rate(struct __prci_clock *pc,
+ unsigned long parent_rate);
+
+unsigned long sifive_prci_tlclksel_recalc_rate(struct __prci_clock *pc,
+ unsigned long parent_rate);
+
+unsigned long sifive_prci_hfpclkplldiv_recalc_rate(struct __prci_clock *pc,
+ unsigned long parent_rate);
+
+int sifive_prci_clock_enable(struct __prci_clock *pc, bool enable);
+
+#endif /* __SIFIVE_CLK_SIFIVE_PRCI_H */
--
2.7.4
More information about the U-Boot
mailing list