[PATCH 00/17] arm: mach-k3: Initial Support for Texas Instruments AM642 Platform

Lokesh Vutla lokeshvutla at ti.com
Thu May 6 14:22:18 CEST 2021

On 06/05/21 1:32 pm, Lokesh Vutla wrote:
> On 23/04/21 9:57 pm, Dave Gerlach wrote:
>> Hi,
>> This series adds initial support for the latest new SoC, AM642,
>> from Texas Instruments.
>> Additional detail can be found in the patch descriptions, also
>> see AM64X Technical Reference Manual (SPRUIM2, Revised Jan 2021)
>> for further details: https://www.ti.com/lit/pdf/spruim2
>> Regards,
>> Dave
>> Dave Gerlach (14):
>>   arm: mach-k3: Add basic support for AM642 SoC definition
>>   arm: mach-k3: am642: Unlock all applicable control MMR registers
>>   arm: mach-k3: am642: Store boot info from ROM
>>   arm: mach-k3: am642: Load SYSFW binary and config from boot media
>>   arm: mach-k3: am642: Use mmc start and stop callbacks
>>   mmc: sdhci_am654: Add Support for TI's AM642 SoC
>>   mailbox: k3-sec-proxy: Extend valid thread IDs
>>   board: ti: am64x: Add board support for am64x evm
>>   dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64
>>   arm: dts: ti: Add Support for AM642 SoC
>>   arm: dts: k3-am642: Add initial support for EVM
>>   arm: dts: k3-am642: Add r5 specific dt support
>>   configs: am64x_evm_r5: Add Initial support
>>   configs: am64x_evm_a53: Add Initial support
> You need to add MAINTAINERS file under board/ti/am64x. Else few testes are failing.
> https://source.denx.de/u-boot/custodians/u-boot-ti/-/pipelines/7397

I have updated locally and pushed the change:

Please see if it looks good.

Thanks and regards,
> Thanks and regards,
> Lokesh

More information about the U-Boot mailing list