[PATCH v1 4/6] net: mv88e61xx: Directly access the switch chip

Ramon Fried rfried.dev at gmail.com
Sat May 8 08:25:52 CEST 2021


On Wed, Mar 17, 2021 at 4:14 PM Lukasz Majewski <lukma at denx.de> wrote:
>
> The mv88e6020 is accessed in a direct way (i.e. with direct read and
> write to mdio bus). The only necessary indirection is required when
> accessing its PHY registers.
>
> Signed-off-by: Lukasz Majewski <lukma at denx.de>
> ---
>
>  drivers/net/phy/mv88e61xx.c | 15 ++++++++++-----
>  1 file changed, 10 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/phy/mv88e61xx.c b/drivers/net/phy/mv88e61xx.c
> index d8116530700d..3d846b89fd12 100644
> --- a/drivers/net/phy/mv88e61xx.c
> +++ b/drivers/net/phy/mv88e61xx.c
> @@ -269,8 +269,11 @@ static int mv88e61xx_reg_read(struct phy_device *phydev, int dev, int reg)
>         int smi_addr = priv->smi_addr;
>         int res;
>
> -       /* In single-chip mode, the device can be addressed directly */
> -       if (smi_addr == 0)
> +       /*
> +        * In single-chip or dual-chip (like mv88e6020) mode, the device can
> +        * be addressed directly.
> +        */
> +       if (smi_addr == 0 || priv->direct_access)
>                 return mdio_bus->read(mdio_bus, dev, MDIO_DEVAD_NONE, reg);
>
>         /* Wait for the bus to become free */
> @@ -306,11 +309,13 @@ static int mv88e61xx_reg_write(struct phy_device *phydev, int dev, int reg,
>         int smi_addr = priv->smi_addr;
>         int res;
>
> -       /* In single-chip mode, the device can be addressed directly */
> -       if (smi_addr == 0) {
> +       /*
> +        * In single-chip or dual-chip (like mv88e6020) mode, the device can
> +        * be addressed directly.
> +        */
> +       if (smi_addr == 0 || priv->direct_access)
>                 return mdio_bus->write(mdio_bus, dev, MDIO_DEVAD_NONE, reg,
>                                 val);
> -       }
>
>         /* Wait for the bus to become free */
>         res = mv88e61xx_smi_wait(mdio_bus, smi_addr);
> --
> 2.20.1
>
Reviewed-by: Ramon Fried <rfried.dev at gmail.com>


More information about the U-Boot mailing list