[PATCH 3/6] clk: sunxi: v3s: fix tabs / spaces
Andre Przywara
andre.przywara at arm.com
Wed May 19 23:43:37 CEST 2021
On Wed, 19 May 2021 21:42:05 +0200
Andreas Rehn <rehn.andreas86 at gmail.com> wrote:
Hi,
> align CLK_SPI0 and CLK_USB_PHY0 with tabs
>
> Signed-off-by: Andreas Rehn <rehn.andreas86 at gmail.com>
> ---
> drivers/clk/sunxi/clk_v3s.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/sunxi/clk_v3s.c b/drivers/clk/sunxi/clk_v3s.c
> index 55fc597043..9c2717bfab 100644
> --- a/drivers/clk/sunxi/clk_v3s.c
> +++ b/drivers/clk/sunxi/clk_v3s.c
> @@ -27,9 +27,9 @@ static struct ccu_clk_gate v3s_gates[] = {
>
> [CLK_BUS_EPHY] = GATE(0x070, BIT(0)),
>
> - [CLK_SPI0] = GATE(0x0a0, BIT(31)),
> + [CLK_SPI0] = GATE(0x0a0, BIT(31)),
What is the problem with this line? This is already using tabs and is
correctly aligned already? Are you using a tab length other than 8, by
any chance?
>
> - [CLK_USB_PHY0] = GATE(0x0cc, BIT(8)),
> + [CLK_USB_PHY0] = GATE(0x0cc, BIT(8)),
This change looks fine.
Cheers,
Andre.
> };
>
> static struct ccu_reset v3s_resets[] = {
More information about the U-Boot
mailing list