[PATCH u-boot-marvell 00/13] Yet another kwboot improvements

[Stefan Roese]

On 25.10.21 15:12, Marek Behún wrote:
> From: Marek Behún <marek.behun at nic.cz>
> 
> Hello Stefan,
> 
> these are another improvements for kwboot, please apply only after series
>    arm: mvebu: nandpagesize support for kwbimage v1
> 
> The main improvement is in patch 5, which changes where we inject the code
> for changing baudrate back to 115200 Baud after fast upload. Instead of
> injecting it before the main data image, we now inject it after.
> 
> This is because there are some kwb images that upload at address 0, and
> injecting the code before that doesn't work, since there is no RAM mapped
> at 0xfffff000.
> 
> Marek & Pali
> 
> Pali Rohár (13):
>    tools: kwboot: Initialize rfds to zero
>    tools: kwboot: Fix initialization of tty device
>    tools: kwboot: Reserve enough space for patching kwbimage in memory
>    tools: kwboot: Validate 4-byte image data checksum
>    tools: kwboot: Inject baudrate change back code after data part
>    tools: kwboot: Recalculate 4-byte data checksum after injecting
>      baudrate code
>    tools: kwboot: Correctly set configuration of UART for BootROM
>      messages
>    tools: kwboot: Show verbose message when waiting for baudrate change
>      magic
>    tools: kwboot: Simplify code for aligning image header
>    tools: kwboot: Do not modify kwbimage header before increasing its
>      size
>    tools: kwboot: Calculate real used space in kwbimage header when
>      calling kwboot_img_grow_hdr()
>    tools: kwboot: Change retry loop from decreasing to increasing
>    tools: kwboot: Resend first 3 xmodem retry packets immediately
> 
>   tools/kwboot.c | 178 +++++++++++++++++++++++++++++++++----------------
>   1 file changed, 120 insertions(+), 58 deletions(-)
> 

Applied to u-boot-marvell/master

Thanks,
Stefan