[PATCH 03/11] mmc: fsl_esdhc_imx: fix voltage validation

[Sean Anderson]

[ fsl_esdhc commit 5b05fc0310cd933acf76ee661577c6b07a95e684 ]

Voltage validation should be done by CMD8. Current comparison between
mmc_cfg voltages and host voltage capabilities is meaningless.
So drop current comparison and let voltage validation is through CMD8.

Signed-off-by: Yangbo Lu <yangbo.lu at nxp.com>
Signed-off-by: Sean Anderson <sean.anderson at seco.com>
---

 drivers/mmc/fsl_esdhc_imx.c | 35 +++++++++++++----------------------
 include/fsl_esdhc_imx.h     | 12 ++++++------
 2 files changed, 19 insertions(+), 28 deletions(-)

diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c
index 40886f37aa..b91dda27f9 100644
--- a/drivers/mmc/fsl_esdhc_imx.c
+++ b/drivers/mmc/fsl_esdhc_imx.c
@@ -1164,7 +1164,7 @@ static int fsl_esdhc_init(struct fsl_esdhc_priv *priv,
 {
 	struct mmc_config *cfg;
 	struct fsl_esdhc *regs;
-	u32 caps, voltage_caps;
+	u32 caps;
 	int ret;
 
 	if (!priv)
@@ -1203,9 +1203,7 @@ static int fsl_esdhc_init(struct fsl_esdhc_priv *priv,
 	memset(cfg, '\0', sizeof(*cfg));
 #endif
 
-	voltage_caps = 0;
 	caps = esdhc_read32(&regs->hostcapblt);
-
 #ifdef CONFIG_MCF5441x
 	/*
 	 * MCF5441x RM declares in more points that sdhc clock speed must
@@ -1216,31 +1214,24 @@ static int fsl_esdhc_init(struct fsl_esdhc_priv *priv,
 #endif
 
 #ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC135
-	caps = caps & ~(ESDHC_HOSTCAPBLT_SRS |
-			ESDHC_HOSTCAPBLT_VS18 | ESDHC_HOSTCAPBLT_VS30);
+	caps &= ~(HOSTCAPBLT_SRS | HOSTCAPBLT_VS18 | HOSTCAPBLT_VS30);
 #endif
 
-	if (caps & ESDHC_HOSTCAPBLT_VS18)
-		voltage_caps |= MMC_VDD_165_195;
-	if (caps & ESDHC_HOSTCAPBLT_VS30)
-		voltage_caps |= MMC_VDD_29_30 | MMC_VDD_30_31;
-	if (caps & ESDHC_HOSTCAPBLT_VS33)
-		voltage_caps |= MMC_VDD_32_33 | MMC_VDD_33_34;
+#ifdef CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
+	caps |= HOSTCAPBLT_VS33;
+#endif
+
+	if (caps & HOSTCAPBLT_VS18)
+		cfg->voltages |= MMC_VDD_165_195;
+	if (caps & HOSTCAPBLT_VS30)
+		cfg->voltages |= MMC_VDD_29_30 | MMC_VDD_30_31;
+	if (caps & HOSTCAPBLT_VS33)
+		cfg->voltages |= MMC_VDD_32_33 | MMC_VDD_33_34;
 
 	cfg->name = "FSL_SDHC";
 #if !CONFIG_IS_ENABLED(DM_MMC)
 	cfg->ops = &esdhc_ops;
 #endif
-#ifdef CONFIG_SYS_SD_VOLTAGE
-	cfg->voltages = CONFIG_SYS_SD_VOLTAGE;
-#else
-	cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
-#endif
-	if ((cfg->voltages & voltage_caps) == 0) {
-		printf("voltage not supported by controller\n");
-		return -1;
-	}
-
 	if (priv->bus_width == 8)
 		cfg->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT;
 	else if (priv->bus_width == 4)
@@ -1258,7 +1249,7 @@ static int fsl_esdhc_init(struct fsl_esdhc_priv *priv,
 			cfg->host_caps &= ~MMC_MODE_4BIT;
 	}
 
-	if (caps & ESDHC_HOSTCAPBLT_HSS)
+	if (caps & HOSTCAPBLT_HSS)
 		cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
 
 #ifdef CONFIG_ESDHC_DETECT_8_BIT_QUIRK
diff --git a/include/fsl_esdhc_imx.h b/include/fsl_esdhc_imx.h
index 45ed635a77..1529b8bba3 100644
--- a/include/fsl_esdhc_imx.h
+++ b/include/fsl_esdhc_imx.h
@@ -164,12 +164,12 @@
 #define BLKATTR_SIZE(x)	(x & 0x1fff)
 #define MAX_BLK_CNT	0x7fff	/* so malloc will have enough room with 32M */
 
-#define ESDHC_HOSTCAPBLT_VS18	0x04000000
-#define ESDHC_HOSTCAPBLT_VS30	0x02000000
-#define ESDHC_HOSTCAPBLT_VS33	0x01000000
-#define ESDHC_HOSTCAPBLT_SRS	0x00800000
-#define ESDHC_HOSTCAPBLT_DMAS	0x00400000
-#define ESDHC_HOSTCAPBLT_HSS	0x00200000
+#define HOSTCAPBLT_VS18	0x04000000
+#define HOSTCAPBLT_VS30	0x02000000
+#define HOSTCAPBLT_VS33	0x01000000
+#define HOSTCAPBLT_SRS	0x00800000
+#define HOSTCAPBLT_DMAS	0x00400000
+#define HOSTCAPBLT_HSS	0x00200000
 
 #define ESDHC_VENDORSPEC_VSELECT 0x00000002 /* Use 1.8V */
 
-- 
2.25.1