[PATCH] ARM: dts: imx6ull: Use the correct name for ESAI_TX0

Otavio Salvador otavio.salvador at ossystems.com.br
Thu Nov 18 12:33:11 CET 2021


Em qui., 18 de nov. de 2021 às 07:06, Fabio Estevam
<festevam at gmail.com> escreveu:
> According to the i.MX6ULL Reference Manual, pad CSI_DATA07 may
> have the ESAI_TX0 functionality, not ESAI_T0.
>
> Also, NXP's i.MX Config Tools 10.0 generates dtsi with the
> MX6ULL_PAD_CSI_DATA07__ESAI_TX0 naming.
>
> Add an entry for the correct name and still keep the old one to
> avoid potential breakage.
>
> Fixes: f8ca22b8de32 ("arm: dts: imx6ull: add pinctrl defines")
> Reported-by: George Makarov <georgemakarov1 at gmail.com>
> Signed-off-by: Fabio Estevam <festevam at gmail.com>

Have you verified if there is any use of the old name in the three? if
so, a patch converting it would be good.

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9 9981-7854          Mobile: +1 (347) 903-9750


More information about the U-Boot mailing list