[PATCH] ARM: dts: imx6ull: Use the correct name for ESAI_TX0

[Fabio Estevam]

Hi Otavio,

On Thu, Nov 18, 2021 at 8:33 AM Otavio Salvador
<otavio.salvador at ossystems.com.br> wrote:
>
> Em qui., 18 de nov. de 2021 às 07:06, Fabio Estevam
> <festevam at gmail.com> escreveu:
> > According to the i.MX6ULL Reference Manual, pad CSI_DATA07 may
> > have the ESAI_TX0 functionality, not ESAI_T0.
> >
> > Also, NXP's i.MX Config Tools 10.0 generates dtsi with the
> > MX6ULL_PAD_CSI_DATA07__ESAI_TX0 naming.
> >
> > Add an entry for the correct name and still keep the old one to
> > avoid potential breakage.
> >
> > Fixes: f8ca22b8de32 ("arm: dts: imx6ull: add pinctrl defines")
> > Reported-by: George Makarov <georgemakarov1 at gmail.com>
> > Signed-off-by: Fabio Estevam <festevam at gmail.com>
>
> Have you verified if there is any use of the old name in the three? if
> so, a patch converting it would be good.

There is no in-tree user of MX6ULL_PAD_CSI_DATA07__ESAI_T0 in U-Boot
and in the kernel.