[PATCH u-boot-marvell 5/5] tools: kwboot: Do not use stack when setting baudrate back to default value
Marek Behún
kabel at kernel.org
Wed Oct 27 20:57:02 CEST 2021
From: Pali Rohár <pali at kernel.org>
The ARM code we inject into the image to change baudrate back to the
default value of 115200 Baud, which is run after successful UART transfer
of the whole image, cannot use stack as at this stage stack pointer is not
initialized yet.
Stack can only be used when BootROM is executing binary header, to
preserve state of registers, since BootROM expects that.
Change the ARM baudrate code to not use stack at all and put binary
header specific pre + post code (which stores and restores registers) into
separate arrays.
The baudrate change code now jumps at it's end and expects that there is
either code which returns to the BootROM or jumps to the original exec
address.
Signed-off-by: Pali Rohár <pali at kernel.org>
Reviewed-by: Marek Behún <marek.behun at nic.cz>
---
tools/kwboot.c | 112 ++++++++++++++++++++++++++++---------------------
1 file changed, 65 insertions(+), 47 deletions(-)
diff --git a/tools/kwboot.c b/tools/kwboot.c
index 62c218ef64..359b43c0d8 100644
--- a/tools/kwboot.c
+++ b/tools/kwboot.c
@@ -78,14 +78,7 @@ struct kwboot_block {
#define KWBOOT_BLK_RSP_TIMEO 1000 /* ms */
#define KWBOOT_HDR_RSP_TIMEO 10000 /* ms */
-/* ARM code making baudrate changing function return to original exec address */
-static unsigned char kwboot_pre_baud_code[] = {
- /* exec_addr: */
- 0x00, 0x00, 0x00, 0x00, /* .word 0 */
- 0x0c, 0xe0, 0x1f, 0xe5, /* ldr lr, exec_addr */
-};
-
-/* ARM code for binary header injection to change baudrate */
+/* ARM code to change baudrate */
static unsigned char kwboot_baud_code[] = {
/* ; #define UART_BASE 0xd0012000 */
/* ; #define THR 0x00 */
@@ -123,14 +116,12 @@ static unsigned char kwboot_baud_code[] = {
/* ; return 0; */
/* ; } */
- 0xfe, 0x5f, 0x2d, 0xe9, /* push { r1 - r12, lr } */
-
/* ; r0 = UART_BASE */
0x0d, 0x02, 0xa0, 0xe3, /* mov r0, #0xd0000000 */
0x12, 0x0a, 0x80, 0xe3, /* orr r0, r0, #0x12000 */
/* ; r2 = address of preamble string */
- 0xcc, 0x20, 0x8f, 0xe2, /* adr r2, preamble */
+ 0xc8, 0x20, 0x8f, 0xe2, /* adr r2, preamble */
/* ; Send preamble string over UART */
/* .Lloop_preamble: */
@@ -177,7 +168,7 @@ static unsigned char kwboot_baud_code[] = {
/* ; Read old baudrate value */
/* ; r2 = old_baudrate */
- 0x88, 0x20, 0x9f, 0xe5, /* ldr r2, old_baudrate */
+ 0x84, 0x20, 0x9f, 0xe5, /* ldr r2, old_baudrate */
/* ; Calculate base clock */
/* ; r1 = r2 * r1 */
@@ -185,7 +176,7 @@ static unsigned char kwboot_baud_code[] = {
/* ; Read new baudrate value */
/* ; r2 = new_baudrate */
- 0x84, 0x20, 0x9f, 0xe5, /* ldr r2, new_baudrate */
+ 0x80, 0x20, 0x9f, 0xe5, /* ldr r2, new_baudrate */
/* ; Calculate new Divisor Latch */
/* ; r1 = DIV_ROUND(r1, r2) = */
@@ -234,9 +225,7 @@ static unsigned char kwboot_baud_code[] = {
0x00, 0x00, 0x51, 0xe3, /* cmp r1, #0 */
0xfc, 0xff, 0xff, 0x1a, /* bne .Lloop_sleep */
- /* ; Return 0 - no error */
- 0x00, 0x00, 0xa0, 0xe3, /* mov r0, #0 */
- 0xfe, 0x9f, 0xbd, 0xe8, /* pop { r1 - r12, pc } */
+ 0x05, 0x00, 0x00, 0xea, /* b end */
/* ; Preamble string */
/* preamble: */
@@ -252,10 +241,29 @@ static unsigned char kwboot_baud_code[] = {
/* ; Placeholder for new baudrate value */
/* new_baudrate: */
0x00, 0x00, 0x00, 0x00, /* .word 0 */
+
+ /* end: */
+};
+
+/* ARM code for storing registers for future returning back to the bootrom */
+static unsigned char kwboot_baud_code_binhdr_pre[] = {
+ 0xfe, 0x5f, 0x2d, 0xe9, /* push { r1 - r12, lr } */
};
-#define KWBOOT_BAUDRATE_BIN_HEADER_SZ (sizeof(kwboot_baud_code) + \
- sizeof(struct opt_hdr_v1) + 8 + 16)
+/* ARM code for returning back to the bootrom */
+static unsigned char kwboot_baud_code_binhdr_post[] = {
+ /* ; Return 0 - no error */
+ 0x00, 0x00, 0xa0, 0xe3, /* mov r0, #0 */
+ 0xfe, 0x9f, 0xbd, 0xe8, /* pop { r1 - r12, pc } */
+};
+
+/* ARM code for jumping to the original image exec_addr */
+static unsigned char kwboot_baud_code_data_jump[] = {
+ 0x04, 0xf0, 0x1f, 0xe5, /* ldr pc, exec_addr */
+ /* ; Placeholder for exec_addr */
+ /* exec_addr: */
+ 0x00, 0x00, 0x00, 0x00, /* .word 0 */
+};
static const char kwb_baud_magic[16] = "$baudratechange";
@@ -1409,44 +1417,51 @@ kwboot_add_bin_ohdr_v1(void *img, size_t *size, uint32_t binsz)
}
static void
-_inject_baudrate_change_code(void *img, size_t *size, int pre,
+_inject_baudrate_change_code(void *img, size_t *size, int for_data,
int old_baud, int new_baud)
{
- uint32_t codesz = sizeof(kwboot_baud_code);
struct main_hdr_v1 *hdr = img;
+ uint32_t orig_datasz;
+ uint32_t codesz;
uint8_t *code;
- if (pre) {
- uint32_t presz = sizeof(kwboot_pre_baud_code);
- uint32_t orig_datasz;
-
+ if (for_data) {
orig_datasz = le32_to_cpu(hdr->blocksize) - sizeof(uint32_t);
- code = kwboot_img_grow_data_right(img, size, presz + codesz);
-
- /*
- * We need to prepend code that loads lr register with original
- * value of hdr->execaddr. We do this by putting the original
- * exec address before the code that loads it relatively from
- * it's beginning.
- * Afterwards we change the exec address to this code (which is
- * at offset 4, because the first 4 bytes contain the original
- * exec address).
- */
- memcpy(code, kwboot_pre_baud_code, presz);
- *(uint32_t *)code = hdr->execaddr;
-
- hdr->execaddr = cpu_to_le32(le32_to_cpu(hdr->destaddr) +
- orig_datasz + 4);
-
- code += presz;
+ codesz = sizeof(kwboot_baud_code) +
+ sizeof(kwboot_baud_code_data_jump);
+ code = kwboot_img_grow_data_right(img, size, codesz);
} else {
+ codesz = sizeof(kwboot_baud_code_binhdr_pre) +
+ sizeof(kwboot_baud_code) +
+ sizeof(kwboot_baud_code_binhdr_post);
code = kwboot_add_bin_ohdr_v1(img, size, codesz);
+
+ codesz = sizeof(kwboot_baud_code_binhdr_pre);
+ memcpy(code, kwboot_baud_code_binhdr_pre, codesz);
+ code += codesz;
}
- memcpy(code, kwboot_baud_code, codesz - 8);
- *(uint32_t *)(code + codesz - 8) = cpu_to_le32(old_baud);
- *(uint32_t *)(code + codesz - 4) = cpu_to_le32(new_baud);
+ codesz = sizeof(kwboot_baud_code) - 2 * sizeof(uint32_t);
+ memcpy(code, kwboot_baud_code, codesz);
+ code += codesz;
+ *(uint32_t *)code = cpu_to_le32(old_baud);
+ code += sizeof(uint32_t);
+ *(uint32_t *)code = cpu_to_le32(new_baud);
+ code += sizeof(uint32_t);
+
+ if (for_data) {
+ codesz = sizeof(kwboot_baud_code_data_jump) - sizeof(uint32_t);
+ memcpy(code, kwboot_baud_code_data_jump, codesz);
+ code += codesz;
+ *(uint32_t *)code = hdr->execaddr;
+ code += sizeof(uint32_t);
+ hdr->execaddr = cpu_to_le32(le32_to_cpu(hdr->destaddr) + orig_datasz);
+ } else {
+ codesz = sizeof(kwboot_baud_code_binhdr_post);
+ memcpy(code, kwboot_baud_code_binhdr_post, codesz);
+ code += codesz;
+ }
}
static int
@@ -1729,10 +1744,13 @@ main(int argc, char **argv)
baudrate = 0;
else
/* ensure we have enough space for baudrate change code */
- after_img_rsv += KWBOOT_BAUDRATE_BIN_HEADER_SZ +
+ after_img_rsv += sizeof(struct opt_hdr_v1) + 8 + 16 +
+ sizeof(kwboot_baud_code_binhdr_pre) +
+ sizeof(kwboot_baud_code) +
+ sizeof(kwboot_baud_code_binhdr_post) +
KWBOOT_XM_BLKSZ +
- sizeof(kwboot_pre_baud_code) +
sizeof(kwboot_baud_code) +
+ sizeof(kwboot_baud_code_data_jump) +
KWBOOT_XM_BLKSZ;
if (imgpath) {
--
2.32.0
More information about the U-Boot
mailing list