[RFC PATCH v1 0/5] arm64: dts: imx8mm: add common -binman.dtsi and further clean-up

[Fabio Estevam]

Hi Marcel,

On Thu, Aug 26, 2021 at 9:14 AM Marcel Ziswiler <marcel at ziswiler.com> wrote:
>
> From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
>
>
> With the move to using binman to generate SPL aka u-boot-spl-ddr.bin and
> U-Boot proper aka u-boot.itb every board now covers such configuration
> in its own U-Boot specific device tree include. Introduce a new common
> imx8mm-binman.dtsi which covers the common part of that configuration.
>
> The initial patch fixes an issue with intermediate binary naming for the
> imx8mm-cl-iot-gate. And subsequent patches further clean up that dtsi.
>
> This series is based on Peng's binman conversion of late [1], my Verdin
> iMX8M Mini target refresh [2], Fabio's generating a single bootable
> flash.bin again for imx8mm-evk [3], Tim's switching imx8mm_venice to
> using binman to pack images [4] and Frieder's support for Kontron
> Electronics i.MX6UL/ULL and i.MX8MM SoMs [5].
>
> This series has been run-time tested on Verdin iMX8M Mini. The other
> targets were only compile tested.
>
> Please note that for now, I left out the following intricacies of
> imx8mm-venice-u-boot.dtsi. Not quite sure what exactly those are used
> for.

The series looks good.

We just need to find a way to not break imx8mm-venice.

Thanks