September 2021 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Sep 1 00:01:23 CEST 2021
Ending: Thu Sep 30 23:31:23 CEST 2021
Messages: 2715

• [PATCH 7/9] serial: lpuart: add new compatible fsl, ls1028a-lpuart   Vladimir Oltean
• [PATCH 0/9] arm: dts: ls1028a: sync device tree with linux   Vladimir Oltean
  • [PATCH 0/9] arm: dts: ls1028a: sync device tree with linux   Michael Walle
  • [PATCH 0/9] arm: dts: ls1028a: sync device tree with linux   Tom Rini
  • [PATCH 0/9] arm: dts: ls1028a: sync device tree with linux   Michael Walle
• [PATCH 1/9] Kconfig: Use spaces not tabs in Kconfig entires   Tom Rini
• [PATCH 1/3] qfw: Switch to CONFIG_SYS_LOAD_ADDR from CONFIG_LOADADDR   Tom Rini
• [PATCH 2/3] global: Convert CONFIG_LOADADDR to CONFIG_SYS_LOADADDR   Tom Rini
• [PATCH 3/3] Convert CONFIG_SYS_LOAD_ADDR to Kconfig   Tom Rini
• [PATCH] Convert CONFIG_MX7D to Kconfig   Tom Rini
• [PATCH 1/6] imx: Introduce CONFIG_MACH_IMX   Tom Rini
• [PATCH] Convert CONFIG_SYS_FSL_DDR4 to Kconfig   Tom Rini
• [PATCHv2] Convert CONFIG_QSPI_BOOT to Kconfig   Tom Rini
• [PATCH 1/2] Convert CONFIG_RAMBOOT_PBL et al to Kconfig   Tom Rini
• [PATCH 2/2] ls1046ardb_qspi*: Enable RAMBOOT_PBL   Tom Rini
• [PATCH] Finish converting CONFIG_SYS_CACHELINE_SIZE to Kconfig   Tom Rini
• [PATCH] Kconfig: Remove all default n/no options   Tom Rini
• [PATCH] Convert CONFIG_SKIP_LOWLEVEL_INIT et al to Kconfig   Tom Rini
• [PATCH] Convert CONFIG_SYS_MALLOC_LEN to Kconfig   Tom Rini
• [PULL] u-boot-sh/master   Tom Rini
• [PATCH v4 1/4] cache: add sifive composable cache driver   Rick Chen
• [PATCH v4 2/4] riscv: lib: implement enable_caches for sifive cache   Rick Chen
  • [PATCH v4 2/4] riscv: lib: implement enable_caches for sifive cache   Zong Li
• Subject: [PATCH 1/6 v2] serial: qcom: add support for GENI serial driver   Minkyu Kang
• [PATCH 4/9] mvebu: ddr: Rename CONFIG_DDR_FIXED_SIZE to CONFIG_SYS_SDRAM_SIZE   Stefan Roese
  • [PATCH 4/9] mvebu: ddr: Rename CONFIG_DDR_FIXED_SIZE to CONFIG_SYS_SDRAM_SIZE   Tom Rini
    • [PATCH 4/9] mvebu: ddr: Rename CONFIG_DDR_FIXED_SIZE to CONFIG_SYS_SDRAM_SIZE   Stefan Roese
• [PATCH v5 0/5] Support SiFive Composable cache driver   Zong Li
  • [PATCH v5 1/5] cache: add sifive composable cache driver   Zong Li
  • [PATCH v5 2/5] common: board_r: support enable_caches for RISC-V   Zong Li
    • [PATCH v5 2/5] common: board_r: support enable_caches for RISC-V   Rick Chen
  • [PATCH v5 3/5] riscv: lib: implement enable_caches for sifive cache   Zong Li
    • [PATCH v5 3/5] riscv: lib: implement enable_caches for sifive cache   Rick Chen
  • [PATCH v5 4/5] board: sifive: use ccache driver instead of helper function   Zong Li
    • [PATCH v5 4/5] board: sifive: use ccache driver instead of helper function   Rick Chen
  • [PATCH v5 5/5] riscv: lib: modify the indent   Zong Li
    • [PATCH v5 5/5] riscv: lib: modify the indent   Rick Chen
• Fwd: Re: [PATCH] efi_loader: Omit memory with "no-map" when returning memory map.   Ard Biesheuvel
  • Fwd: Re: [PATCH] efi_loader: Omit memory with "no-map" when returning memory map.   Kristian Amlie
    • Fwd: Re: [PATCH] efi_loader: Omit memory with "no-map" when returning memory map.   Ard Biesheuvel
      • Fwd: Re: [PATCH] efi_loader: Omit memory with "no-map" when returning memory map.   Kristian Amlie
• [PATCH v5] arm: add initial support for the Phytium Pomelo Board   nicholas_zheng at outlook.com
  • [PATCH v5] arm: add initial support for the Phytium Pomelo Board   Rob Herring
• [PATCH v1 0/2] board: toradex: improve env badblock management for NAND variant boards   Francesco Dolcini
  • [PATCH v1 1/2] colibri-imx6ull: improve env badblock management   Francesco Dolcini
  • [PATCH v1 2/2] colibri-imx7: improve env badblock management   Francesco Dolcini
• [PATCH] stm32mp: Fix board_get_usable_ram_top()   Patrice Chotard
  • [PATCH] stm32mp: Fix board_get_usable_ram_top()   Patrick DELAUNAY
  • [PATCH] stm32mp: Fix board_get_usable_ram_top()   Patrick DELAUNAY
• [PATCH v2 0/9] arm: dts: ls1028a: sync device tree with linux   Michael Walle
  • [PATCH v2 1/9] armv8: ls1028a: add IOMMU stream ID to vivante node   Michael Walle
  • [PATCH v2 2/9] arm: dts: ls1028a: move devices into /soc   Michael Walle
    • [PATCH v2 2/9] arm: dts: ls1028a: move devices into /soc   Vladimir Oltean
  • [PATCH v2 3/9] arm: dts: ls1028a: remove /memory node   Michael Walle
  • [PATCH v2 4/9] arm: dts: ls1028a: update the labels   Michael Walle
    • [PATCH v2 4/9] arm: dts: ls1028a: update the labels   Vladimir Oltean
  • [PATCH v2 5/9] watchdog: sp805_wdt: use correct compatible string   Michael Walle
  • [PATCH v2 6/9] spi: fsl_dspi: add new compatible fsl, ls1021a-v1.0-dspi   Michael Walle
  • [PATCH v2 7/9] serial: lpuart: add new compatible fsl,ls1028a-lpuart   Michael Walle
  • [PATCH v2 8/9] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux   Michael Walle
    • [PATCH v2 8/9] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux   Vladimir Oltean
      • [PATCH v2 8/9] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux   Michael Walle
      • [PATCH v2 8/9] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux   Vladimir Oltean
      • [PATCH v2 8/9] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux   Michael Walle
    • [PATCH v2 8/9] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux   Vladimir Oltean
      • [PATCH v2 8/9] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux   Michael Walle
      • [PATCH v2 8/9] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux   Vladimir Oltean
      • [PATCH v2 8/9] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux   Michael Walle
      • [PATCH v2 8/9] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux   Vladimir Oltean
      • [PATCH v2 8/9] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux   Michael Walle
      • [PATCH v2 8/9] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux   Vladimir Oltean
      • [PATCH v2 8/9] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux   Michael Walle
      • [PATCH v2 8/9] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux   Tom Rini
    • [PATCH v2 8/9] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux   Vladimir Oltean
      • [PATCH v2 8/9] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux   Michael Walle
    • [PATCH v2 8/9] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux   Vladimir Oltean
      • [PATCH v2 8/9] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux   Michael Walle
  • [PATCH v2 9/9] arm: dts: sl28: sync dtbs   Michael Walle
• [PATCH] arm: mvebu: a38x: Define supported UART baudrates   Stefan Roese
• [RFC PATCH] stm32mp1: Replace STM32IMAGE config with TFABOOT_FIP   Patrick DELAUNAY
  • [RFC PATCH] stm32mp1: Replace STM32IMAGE config with TFABOOT_FIP   Marek Vasut
    • [RFC PATCH] stm32mp1: Replace STM32IMAGE config with TFABOOT_FIP   Alex G.
      • [RFC PATCH] stm32mp1: Replace STM32IMAGE config with TFABOOT_FIP   Etienne Carriere
• [PATCH 1/4] tools: kwbimage: Verify supported image version   Stefan Roese
• [PATCH 2/4] tools: kwbimage: Verify size of v0 image header   Stefan Roese
• [PATCH 3/4] tools: kwbimage: Verify size of image data   Stefan Roese
• [PATCH 4/4] tools: kwbimage: Use IBR_HDR_* constants instead of raw numbers   Stefan Roese
• [PATCH 1/2] arm: mvebu: axp: Properly check for Armada XP in mach/soc.h   Stefan Roese
• [PATCH 1/3] arm: mvebu: espressobin: Enable also SATA support via PCIe   Stefan Roese
• [PATCH 2/3] arm: mvebu: turris_mox: Enable SATA support   Stefan Roese
• [PATCH 3/3] arm: mvebu: turris_omnia: Enable NVMe support   Stefan Roese
• [PATCH] serial: a37xx: Remove CONFIG_DEBUG_UART_SHIFT options   Stefan Roese
• [PATCH v2] arm: mvebu: a37xx: Define CONFIG_SYS_REF_CLK and use it instead of get_ref_clk()   Stefan Roese
  • [PATCH v2] arm: mvebu: a37xx: Define CONFIG_SYS_REF_CLK and use it instead of get_ref_clk()   Tom Rini
    • [PATCH v2] arm: mvebu: a37xx: Define CONFIG_SYS_REF_CLK and use it instead of get_ref_clk()   Pali Rohár
      • [PATCH v2] arm: mvebu: a37xx: Define CONFIG_SYS_REF_CLK and use it instead of get_ref_clk()   Tom Rini
      • [PATCH v2] arm: mvebu: a37xx: Define CONFIG_SYS_REF_CLK and use it instead of get_ref_clk()   Pali Rohár
      • [PATCH v2] arm: mvebu: a37xx: Define CONFIG_SYS_REF_CLK and use it instead of get_ref_clk()   Tom Rini
      • [PATCH v2] arm: mvebu: a37xx: Define CONFIG_SYS_REF_CLK and use it instead of get_ref_clk()   Pali Rohár
      • [PATCH v2] arm: mvebu: a37xx: Define CONFIG_SYS_REF_CLK and use it instead of get_ref_clk()   Tom Rini
      • [PATCH v2] arm: mvebu: a37xx: Define CONFIG_SYS_REF_CLK and use it instead of get_ref_clk()   Tom Rini
• [PATCH v2 2/5] usb: gadget: Add bcdDevice for the DWC2 USB Gadget Controller   Patrice CHOTARD
• [PATCH u-boot-mvebu v2 1/4] arm: mvebu: Move get_boot_device() to cpu.c and make visible   Stefan Roese
• [PATCH u-boot-mvebu v2 2/4] arm: mvebu: turris_omnia: don't guard by CONFIG_SPL_BUILD macro   Stefan Roese
• [PATCH u-boot-mvebu v2 3/4] arm: mvebu: turris_omnia: disable MCU watchdog in SPL when booting over UART   Stefan Roese
• [PATCH u-boot-mvebu v2 4/4] arm: mvebu: turris_omnia: disable MCU watchdog in board_late_init()   Stefan Roese
• [PATCH 1/1] kwbimage: check fopen() return value   Stefan Roese
• [PATCH 1/1] kwbimage: check return value of image_get_csk_index   Stefan Roese
• [PATCH] tools: kwbimage: Remove comment about unimplemented register headers in v1 images   Stefan Roese
• [PATCH 0/3] common: Add fdt network helper   Tony Dinh
  • [PATCH 0/3] common: Add fdt network helper   Simon Glass
    • [PATCH 0/3] common: Add fdt network helper   Tony Dinh
• Please pull u-boot-marvell/master   Stefan Roese
  • Please pull u-boot-marvell/master   Tom Rini
  • Please pull u-boot-marvell/master   Stefan Roese
    • Please pull u-boot-marvell/master   Tom Rini
  • Please pull u-boot-marvell/master   Stefan Roese
    • Please pull u-boot-marvell/master   Tom Rini
  • Please pull u-boot-marvell/master   Stefan Roese
    • Please pull u-boot-marvell/master   Tom Rini
• [PATCH 1/2] board: stm32mp1: Remove gpio_hog_probe_all() from board   Patrice Chotard
  • [PATCH 2/2] board: dh_stm32mp1: Remove gpio_hog_probe_all() from board   Patrice Chotard
    • [PATCH 2/2] board: dh_stm32mp1: Remove gpio_hog_probe_all() from board   Patrick DELAUNAY
    • [PATCH 2/2] board: dh_stm32mp1: Remove gpio_hog_probe_all() from board   Marek Vasut
  • [PATCH 1/2] board: stm32mp1: Remove gpio_hog_probe_all() from board   Patrick DELAUNAY
• [PATCH] btrfs: Use default subvolume as filesystem root   Matthias Brugger
  • [PATCH] btrfs: Use default subvolume as filesystem root   Tom Rini
    • [PATCH] btrfs: Use default subvolume as filesystem root   Matthias Brugger
      • [PATCH] btrfs: Use default subvolume as filesystem root   Qu Wenruo
  • [PATCH] btrfs: Use default subvolume as filesystem root   Tom Rini
• [PATCH] lib: fix typos in Kconfig   Oleksandr Suvorov
• [PATCH v2] lib: fix typos in Kconfig   Oleksandr Suvorov
  • [PATCH v2] lib: fix typos in Kconfig   Heinrich Schuchardt
  • [PATCH v2] lib: fix typos in Kconfig   Tom Rini
• Please pull u-boot-marvell/next (watchdog related)   Tom Rini
  • Please pull u-boot-marvell/next (watchdog related)   Stefan Roese
    • Please pull u-boot-marvell/next (watchdog related)   Tom Rini
      • Please pull u-boot-marvell/next (watchdog related)   Stefan Roese
• [[PATCH] colibri-imx6ull: move CONFIG_BOOTCOMMAND from header to defconfig   liu.ming50 at gmail.com
  • [[PATCH] colibri-imx6ull: move CONFIG_BOOTCOMMAND from header to defconfig   Marcel Ziswiler
• [[PATCH] colibri-imx7: move CONFIG_BOOTCOMMAND from header to defconfig   liu.ming50 at gmail.com
• [PATCH V2] colibri-imx6ull: move CONFIG_BOOTCOMMAND from header to defconfig   liu.ming50 at gmail.com
• [PATCH V2] colibri-imx7: move CONFIG_BOOTCOMMAND from header to defconfig   liu.ming50 at gmail.com
• [PATCH 10/10] stm32mp1: spl: Copy optee nodes to target FDT for OP-TEE payloads   Alex G.
  • [PATCH 10/10] stm32mp1: spl: Copy optee nodes to target FDT for OP-TEE payloads   Alex G.
    • [PATCH 10/10] stm32mp1: spl: Copy optee nodes to target FDT for OP-TEE payloads   Patrick DELAUNAY
  • [PATCH 10/10] stm32mp1: spl: Copy optee nodes to target FDT for OP-TEE payloads   Etienne Carriere
• [PATCH 00/11] Reduce usage of timestamp macros   Tom Rini
  • [PATCH 00/11] Reduce usage of timestamp macros   Pali Rohár
    • [PATCH 00/11] Reduce usage of timestamp macros   Tom Rini
      • [PATCH 00/11] Reduce usage of timestamp macros   Pali Rohár
      • [PATCH 00/11] Reduce usage of timestamp macros   Tom Rini
      • [PATCH 00/11] Reduce usage of timestamp macros   Pali Rohár
      • [PATCH 00/11] Reduce usage of timestamp macros   Pali Rohár
      • [PATCH 00/11] Reduce usage of timestamp macros   Pali Rohár
      • [PATCH 00/11] Reduce usage of timestamp macros   Tom Rini
      • [PATCH 00/11] Reduce usage of timestamp macros   Tom Rini
• [PATCH] lib: rsa: Extract public key from private key if keyfile argument is used   Tom Rini
• [PATCH v2 2/2] tools: Handle PAGER containing arguments   Tom Rini
• [PATCH v3 5/5] test/py: efi_capsule: align with the syntax change of mkeficapsule   AKASHI Takahiro
• [PATCH 08/14] lmb: nds32: Add arch_lmb_reserve()   Rick Chen
• [PATCH 09/14] lmb: riscv: Add arch_lmb_reserve()   Rick Chen
• [u-boot PATCH] arm: mach-k3: am6_init: Prioritize MSMC traffic over DDR in NAVSS Northbridge   Jan Kiszka
  • [u-boot PATCH] arm: mach-k3: am6_init: Prioritize MSMC traffic over DDR in NAVSS Northbridge   Jan Kiszka
    • [u-boot PATCH] arm: mach-k3: am6_init: Prioritize MSMC traffic over DDR in NAVSS Northbridge   Tom Rini
      • [u-boot PATCH] arm: mach-k3: am6_init: Prioritize MSMC traffic over DDR in NAVSS Northbridge   Nishanth Menon
      • [u-boot PATCH] arm: mach-k3: am6_init: Prioritize MSMC traffic over DDR in NAVSS Northbridge   Jan Kiszka
      • [u-boot PATCH] arm: mach-k3: am6_init: Prioritize MSMC traffic over DDR in NAVSS Northbridge   Nishanth Menon
• [PATCH] watchdog: Fix watchdog enablement in SPL and TPL   Marcel Ziswiler
  • [PATCH] watchdog: Fix watchdog enablement in SPL and TPL   Stefan Roese
    • [PATCH] watchdog: Fix watchdog enablement in SPL and TPL   Marek Vasut
• [PATCH] arm: mvebu: turris_{omnia, mox}: GPT partition support   Pali Rohár
  • [PATCH] arm: mvebu: turris_{omnia, mox}: GPT partition support   Stefan Roese
• [PATCH] arm: mvebu: espressobin: Enable GPT partition support   Pali Rohár
  • [PATCH] arm: mvebu: espressobin: Enable GPT partition support   Stefan Roese
• [PATCH v3 3/5] doc: update UEFI document for usage of mkeficapsule   AKASHI Takahiro
• [PATCH v3 0/3] efi_loader: secure boot using preseed cert db   Heinrich Schuchardt
• [PATCH v3 1/3] efi_loader: don't load signature database from file   Heinrich Schuchardt
  • [PATCH v3 1/3] efi_loader: don't load signature database from file   AKASHI Takahiro
    • [PATCH v3 1/3] efi_loader: don't load signature database from file   Heinrich Schuchardt
• [PATCH v3 2/3] efi_loader: efi_auth_var_type for AuditMode, DeployedMode   Heinrich Schuchardt
• [PATCH v3 3/3] efi_loader: correct determination of secure boot state   Heinrich Schuchardt
• [PATCH 1/2] lib: optee: remove the duplicate CONFIG_OPTEE   Patrick Delaunay
  • [PATCH 1/2] lib: optee: remove the duplicate CONFIG_OPTEE   Alex G.
    • [PATCH 1/2] lib: optee: remove the duplicate CONFIG_OPTEE   Etienne Carriere
      • [PATCH 1/2] lib: optee: remove the duplicate CONFIG_OPTEE   Patrick DELAUNAY
      • [PATCH 1/2] lib: optee: remove the duplicate CONFIG_OPTEE   Alex G.
      • [PATCH 1/2] lib: optee: remove the duplicate CONFIG_OPTEE   Alex G.
• [PATCH 2/2] tee: add a stub for tee_find_device   Patrick Delaunay
  • [PATCH 2/2] tee: add a stub for tee_find_device   Etienne Carriere
  • [PATCH 2/2] tee: add a stub for tee_find_device   Jens Wiklander
• [PATCH] arm: mvebu: a38x: Fix 5200000 baudrate   Pali Rohár
  • [PATCH] arm: mvebu: a38x: Fix 5200000 baudrate   Stefan Roese
• [PATCH 1/2] arm: stm32: Disable ATAGs support   Patrick Delaunay
  • [PATCH 2/2] board: stm32: Remove the bi_boot_params initialization   Patrick Delaunay
    • [PATCH 2/2] board: stm32: Remove the bi_boot_params initialization   Patrice CHOTARD
    • [PATCH 2/2] board: stm32: Remove the bi_boot_params initialization   Alex G.
  • [PATCH 1/2] arm: stm32: Disable ATAGs support   Patrice CHOTARD
  • [PATCH 1/2] arm: stm32: Disable ATAGs support   Tom Rini
    • [PATCH 1/2] arm: stm32: Disable ATAGs support   Patrick DELAUNAY
  • [PATCH 1/2] arm: stm32: Disable ATAGs support   Alex G.
• [PATCH v2] configs: fsl: migrate FMAN/QE specific defines to Kconfig   Rajesh Bhagat
• [PATCH v2 0/5] Use device tree to get DRAM for sama5d27_som1_ek/sama5d2_xplained   Eugen.Hristev at microchip.com
• [PATCH] drivers: net: phy: in112525: fix out of bounds write   Cosmin-Florin Aluchenesei
  • [PATCH] drivers: net: phy: in112525: fix out of bounds write   Ramon Fried
• [PATCH] board: freescale: lx2160a: fix out of bounds write   Cosmin-Florin Aluchenesei
• [PATCH] lib/rsa: Remove support for OpenSSL < 1.1.0 and libressl < 2.7.0   Tom Rini
  • [PATCH] lib/rsa: Remove support for OpenSSL < 1.1.0 and libressl < 2.7.0   Peter Robinson
    • [PATCH] lib/rsa: Remove support for OpenSSL < 1.1.0 and libressl < 2.7.0   Tom Rini
      • [PATCH] lib/rsa: Remove support for OpenSSL < 1.1.0 and libressl < 2.7.0   Peter Robinson
      • [PATCH] lib/rsa: Remove support for OpenSSL < 1.1.0 and libressl < 2.7.0   Alex G.
      • [PATCH] lib/rsa: Remove support for OpenSSL < 1.1.0 and libressl < 2.7.0   Tom Rini
• [PATCH 1/4] lib/md5: Export progressive APIs   Tom Rini
• [PATCH 2/4] dm: hash: Add new UCLASS_HASH support   Tom Rini
  • [PATCH 2/4] dm: hash: Add new UCLASS_HASH support   Alex G.
    • [PATCH 2/4] dm: hash: Add new UCLASS_HASH support   ChiaWei Wang
    • [PATCH 2/4] dm: hash: Add new UCLASS_HASH support   Simon Glass
      • [PATCH 2/4] dm: hash: Add new UCLASS_HASH support   Alex G.
      • [PATCH 2/4] dm: hash: Add new UCLASS_HASH support   Simon Glass
  • [PATCH 2/4] dm: hash: Add new UCLASS_HASH support   Simon Glass
    • [PATCH 2/4] dm: hash: Add new UCLASS_HASH support   ChiaWei Wang
      • [PATCH 2/4] dm: hash: Add new UCLASS_HASH support   Simon Glass
• [PATCH 3/4] crypto: hash: Add software hash DM driver   Tom Rini
  • [PATCH 3/4] crypto: hash: Add software hash DM driver   Alex G.
    • [PATCH 3/4] crypto: hash: Add software hash DM driver   ChiaWei Wang
• [PATCH 4/4] fit: Use DM hash driver if supported   Tom Rini
  • [PATCH 4/4] fit: Use DM hash driver if supported   Alex G.
    • [PATCH 4/4] fit: Use DM hash driver if supported   ChiaWei Wang
• [PATCH] lib: -Wformat-truncation in rsa_engine_get_priv_key   Tom Rini
• [PATCH] mkimage: clarify error message for empty input files   Tom Rini
• [PATCH] scripts/checkpatch.pl: Resync with v5.13   Tom Rini
• [PATCH] loadb: Properly indicate aborted kermit transfer   Tom Rini
• [PATCH 1/7] MAINTAINERS: Add new drivers for ARM U8500   Tom Rini
• [PATCH 1/1] rtc: ds1307: Fix incorrect clock reset for DS13xx   Tom Rini
• [PATCH 1/2] ata: ahci-pci: Fix dependency on DM_PCI   Tom Rini
• [PATCH 2/2] ata: ahci-pci: Add new option CONFIG_SPL_AHCI_PCI   Tom Rini
• [PATCH] list: include linux/kernel.h   Tom Rini
• [PATCH v5 3/3] arm64: Kconfig: Enable usage of optimized memset/memcpy/memmove   Tom Rini
  • [PATCH v5 3/3] arm64: Kconfig: Enable usage of optimized memset/memcpy/memmove   Stefan Roese
    • [PATCH v5 3/3] arm64: Kconfig: Enable usage of optimized memset/memcpy/memmove   Tom Rini
• Subject: [PATCH 1/6 v3] serial: qcom: add support for GENI serial driver   Дмитрий Санковский
  • Subject: [PATCH 1/6 v3] serial: qcom: add support for GENI serial driver   Ramon Fried
  • Subject: [PATCH 1/6 v3] serial: qcom: add support for GENI serial driver   Tom Rini
• [PATCH v6 0/3] arm64: Add optimized memset/memcpy/memove functions   Stefan Roese
  • [PATCH v6 1/3] arm64: arch/arm/lib: Add optimized memset/memcpy/memmove functions   Stefan Roese
    • [PATCH v6 1/3] arm64: arch/arm/lib: Add optimized memset/memcpy/memmove functions   Tom Rini
  • [PATCH v6 3/3] arm64: Kconfig: Enable usage of optimized memset/memcpy/memmove   Stefan Roese
    • [PATCH v6 3/3] arm64: Kconfig: Enable usage of optimized memset/memcpy/memmove   Tom Rini
      • [PATCH v6 3/3] arm64: Kconfig: Enable usage of optimized memset/memcpy/memmove   Stefan Roese
    • [PATCH v6 3/3] arm64: Kconfig: Enable usage of optimized memset/memcpy/memmove   Tom Rini
• [PATCH v6 2/3] arm64: memset-arm64: Use simple memset when cache is disabled   Stefan Roese
  • [PATCH v6 2/3] arm64: memset-arm64: Use simple memset when cache is disabled   Tom Rini
• Setting serverip from DHCP server   Gregory Anders
• [PATCH] RFC: Support an EFI-loader bootflow   Simon Glass
  • [PATCH] RFC: Support an EFI-loader bootflow   AKASHI Takahiro
    • [PATCH] RFC: Support an EFI-loader bootflow   Simon Glass
      • [PATCH] RFC: Support an EFI-loader bootflow   Heinrich Schuchardt
      • [PATCH] RFC: Support an EFI-loader bootflow   Simon Glass
      • [PATCH] RFC: Support an EFI-loader bootflow   AKASHI Takahiro
      • [PATCH] RFC: Support an EFI-loader bootflow   Simon Glass
      • [PATCH] RFC: Support an EFI-loader bootflow   AKASHI Takahiro
      • [PATCH] RFC: Support an EFI-loader bootflow   AKASHI Takahiro
      • [PATCH] RFC: Support an EFI-loader bootflow   Simon Glass
• [PATCH][RFC] tree: imx: remove old fit generator script   Simon Glass
  • [PATCH][RFC] tree: imx: remove old fit generator script   Fabio Estevam
• [PATCH 1/2] sandbox: correct cpu nodes   Simon Glass
  • [PATCH 1/2] sandbox: correct cpu nodes   Simon Glass
• [PATCH 1/1] lib/rsa: don't use NULL as key_id   Simon Glass
  • [PATCH 1/1] lib/rsa: don't use NULL as key_id   Tom Rini
• [PATCH] doc: Add documentation about devicetree usage   Simon Glass
  • [PATCH] doc: Add documentation about devicetree usage   Simon Glass
• sandbox TPM   Simon Glass
• [PATCH v3 0/7] vpl: Introduce a verifying program loader   Simon Glass
• [PATCH v3 00/29] arm: dts: ls1028a: sync device tree with linux   Michael Walle
  • [PATCH v3 01/29] armv8: ls1028a: add IOMMU stream ID to vivante node   Michael Walle
    • [PATCH v3 01/29] armv8: ls1028a: add IOMMU stream ID to vivante node   Vladimir Oltean
      • Re: [PATCH v3 01/29] armv8: ls1028a: add IOMMU stream ID to vivante node   Michael Walle
  • [PATCH v3 02/29] arm: dts: ls1028a: remove /memory node   Michael Walle
  • [PATCH v3 03/29] arm: dts: ls1028a-{rdb, qds}: remove dm-pre-reloc property   Michael Walle
    • [PATCH v3 03/29] arm: dts: ls1028a-{rdb, qds}: remove dm-pre-reloc property   Vladimir Oltean
  • [PATCH v3 04/29] arm: dts: ls1028a: add an empty /soc   Michael Walle
    • [PATCH v3 04/29] arm: dts: ls1028a: add an empty /soc   Vladimir Oltean
  • [PATCH v3 05/29] arm: dts: ls1028a: move the clockgen node into /soc   Michael Walle
    • [PATCH v3 05/29] arm: dts: ls1028a: move the clockgen node into /soc   Vladimir Oltean
  • [PATCH v3 06/29] arm: dts: ls1028a: move I2C controller nodes into /soc   Michael Walle
    • [PATCH v3 06/29] arm: dts: ls1028a: move I2C controller nodes into /soc   Vladimir Oltean
  • [PATCH v3 07/29] arm: dts: ls1028a: move the FlexSPI controller node   Michael Walle
    • [PATCH v3 07/29] arm: dts: ls1028a: move the FlexSPI controller node   Vladimir Oltean
  • [PATCH v3 08/29] arm: dts: ls1028a: move the SPI and eSDHC controller nodes into /soc   Michael Walle
    • [PATCH v3 08/29] arm: dts: ls1028a: move the SPI and eSDHC controller nodes into /soc   Vladimir Oltean
  • [PATCH v3 09/29] arm: dts: ls1028a: move the UART controller nodes into /soc   Michael Walle
    • [PATCH v3 09/29] arm: dts: ls1028a: move the UART controller nodes into /soc   Vladimir Oltean
  • [PATCH v3 10/29] arm: dts: ls1028a: move the low-power UART nodes into /soc   Michael Walle
    • [PATCH v3 10/29] arm: dts: ls1028a: move the low-power UART nodes into /soc   Vladimir Oltean
  • [PATCH v3 11/29] arm: dts: ls1028a: move the GPIO controller nodes into /soc   Michael Walle
    • [PATCH v3 11/29] arm: dts: ls1028a: move the GPIO controller nodes into /soc   Vladimir Oltean
  • [PATCH v3 12/29] arm: dts: ls1028a: move SATA and USB controller nodes into /soc   Michael Walle
    • [PATCH v3 12/29] arm: dts: ls1028a: move SATA and USB controller nodes into /soc   Vladimir Oltean
  • [PATCH v3 13/29] arm: dts: ls1028a: move the PCIe controller nodes into /soc   Michael Walle
    • [PATCH v3 13/29] arm: dts: ls1028a: move the PCIe controller nodes into /soc   Vladimir Oltean
  • [PATCH v3 14/29] arm: dts: ls1028a: move the watchdog node into /soc   Michael Walle
    • [PATCH v3 14/29] arm: dts: ls1028a: move the watchdog node into /soc   Vladimir Oltean
  • [PATCH v3 15/29] arm: dts: ls1028a: move the iRC node and its devices into /soc   Michael Walle
    • [PATCH v3 15/29] arm: dts: ls1028a: move the iRC node and its devices into /soc   Vladimir Oltean
  • [PATCH v3 16/29] arm: dts: ls1028a: update the labels   Michael Walle
    • [PATCH v3 16/29] arm: dts: ls1028a: update the labels   Vladimir Oltean
  • [PATCH v3 17/29] watchdog: sp805_wdt: use correct compatible string   Michael Walle
  • [PATCH v3 18/29] spi: fsl_dspi: add new compatible fsl, ls1021a-v1.0-dspi   Michael Walle
  • [PATCH v3 19/29] spi: fsl_dspi: rename num-cs to spi-num-chipselects   Michael Walle
    • [PATCH v3 19/29] spi: fsl_dspi: rename num-cs to spi-num-chipselects   Vladimir Oltean
  • [PATCH v3 20/29] serial: lpuart: add new compatible fsl, ls1028a-lpuart   Michael Walle
  • [PATCH v3 21/29] scsi: ceva: rename the resource name to match the linux kernel one   Michael Walle
    • [PATCH v3 21/29] scsi: ceva: rename the resource name to match the linux kernel one   Vladimir Oltean
      • [PATCH v3 21/29] scsi: ceva: rename the resource name to match the linux kernel one   Michael Walle
  • [PATCH v3 22/29] usb: xhci: fsl: add new compatible fsl,ls1028a-dwc3   Michael Walle
    • [PATCH v3 22/29] usb: xhci: fsl: add new compatible fsl, ls1028a-dwc3   Bin Meng
  • [PATCH v3 23/29] pci: layerscape: add official ls1028a binding support   Michael Walle
  • [PATCH v3 24/29] arm: dts: ls1028a: remove num-lanes in the PCIe controller nodes   Michael Walle
    • [PATCH v3 24/29] arm: dts: ls1028a: remove num-lanes in the PCIe controller nodes   Vladimir Oltean
  • [PATCH v3 25/29] arm: dts: ls1028a: move the PCI I/O window to match   Michael Walle
    • [PATCH v3 25/29] arm: dts: ls1028a: move the PCI I/O window to match   Vladimir Oltean
      • [PATCH v3 25/29] arm: dts: ls1028a: move the PCI I/O window to match   Z.Q. Hou
  • [PATCH v3 26/29] arm: dts: ls1028a: disable the PCIe controller by default   Michael Walle
    • [PATCH v3 26/29] arm: dts: ls1028a: disable the PCIe controller by default   Vladimir Oltean
  • [PATCH v3 27/29] arm: dts: ls1028a: drop non-removable property from esdhc controller node   Michael Walle
    • [PATCH v3 27/29] arm: dts: ls1028a: drop non-removable property from esdhc controller node   Vladimir Oltean
      • [PATCH v3 27/29] arm: dts: ls1028a: drop non-removable property from esdhc controller node   Michael Walle
      • [PATCH v3 27/29] arm: dts: ls1028a: drop non-removable property from esdhc controller node   Vladimir Oltean
  • [PATCH v3 28/29] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux   Michael Walle
    • [PATCH v3 28/29] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux   Vladimir Oltean
  • [PATCH v3 29/29] arm: dts: sl28: sync dtbs   Michael Walle
    • [PATCH v3 29/29] arm: dts: sl28: sync dtbs   Vladimir Oltean
• [RFC PATCH v1 0/5] arm64: dts: imx8mm: add common -binman.dtsi and further clean-up   Fabio Estevam
• [PATCH] doc: Remove information about CAPSULE_FMP_HEADER   Heinrich Schuchardt
  • [PATCH] doc: Remove information about CAPSULE_FMP_HEADER   Michal Simek
• [PATCH v2 0/2] Add MNT Reform 2 board support   Patrick Wildt
  • [PATCH v2 1/2] arm: dts: imx8mq: add MNT Reform 2   Patrick Wildt
  • [PATCH v2 2/2] board: mntre: imx8mq: Add MNT Reform 2 board support   Patrick Wildt
    • [PATCH v2 2/2] board: mntre: imx8mq: Add MNT Reform 2 board support   Heiko Thiery
      • [PATCH v2 2/2] board: mntre: imx8mq: Add MNT Reform 2 board support   Patrick Wildt
      • [PATCH v2 2/2] board: mntre: imx8mq: Add MNT Reform 2 board support   Heiko Thiery
      • [PATCH v2 2/2] board: mntre: imx8mq: Add MNT Reform 2 board support   Patrick Wildt
      • [PATCH v2 2/2] board: mntre: imx8mq: Add MNT Reform 2 board support   Heiko Thiery
      • [PATCH v2 2/2] board: mntre: imx8mq: Add MNT Reform 2 board support   Fabio Estevam
      • [PATCH v2 2/2] board: mntre: imx8mq: Add MNT Reform 2 board support   Patrick Wildt
• [PATCH v2 1/2] arm: Fix option dependency with Kconfig language   Tom Rini
• [PATCH v2 2/2] armv7: Add Position Independent Execution support   Tom Rini
• [PATCH v2 1/2] arm: mach-snapdragon: misc: Initialize eMMC if necessary   Tom Rini
• [PATCH v2 2/2] arm: mach-snapdrgon: misc: Simplify msm_generate_mac_addr()   Tom Rini
• [PATCH] Revert "configs: synquacer: Make U-Boot binary position independent"   Tom Rini
• [PATCH v2 1/6] armv8: Disable pointer authentication traps for EL1   Tom Rini
• [PATCH v2 2/6] armv8: Ensure EL1&0 VMSA is enabled   Tom Rini
• [PATCH v2 3/6] armv8: Add ARMv8 MPU configuration logic   Tom Rini
• [PATCH v2 4/6] vexpress64: Add BASER_FVP vexpress board variant   Tom Rini
• [PATCH v2 5/6] arm: Use armv8_switch_to_el1 env to switch to EL1   Tom Rini
  • [PATCH v2 5/6] arm: Use armv8_switch_to_el1 env to switch to EL1   Andre Przywara
    • [PATCH v2 5/6] arm: Use armv8_switch_to_el1 env to switch to EL1   Tom Rini
      • [PATCH v2 5/6] arm: Use armv8_switch_to_el1 env to switch to EL1   Peter Hoyes
      • [PATCH v2 5/6] arm: Use armv8_switch_to_el1 env to switch to EL1   Tom Rini
• [PATCH v2 6/6] doc: Add documentation for the Arm vexpress board configs   Tom Rini
• [PATCH v2] ARM: Prevent the compiler from using NEON registers   Tom Rini
• [PATCH 1/1] cmd/part: correct alignment of partition list   Tom Rini
• [PATCH] lib: add crc16.o if CONFIG_MMC_SPI_CRC_ON for SPL build   Tom Rini
  • [PATCH] lib: add crc16.o if CONFIG_MMC_SPI_CRC_ON for SPL build   Bin Meng
    • [PATCH] lib: add crc16.o if CONFIG_MMC_SPI_CRC_ON for SPL build   Tom Rini
• [PATCH] mailmap: Update e-mail for Jernej Skrabec   Tom Rini
• [PATCH v1] pci: iproc: fix compilation errors and warnings   Tom Rini
• [PATCH] psci: fix double declaration   Tom Rini
• [PATCH 1/1] tools: env: Handle shorter read calls   Tom Rini
• [PATCH v4 1/2] mmc: Add support for enumerating MMC card in a given mode using mmc command   Jaehoon Chung
• [PATCH v2 1/2] mmc: fsl_esdhc_imx: initialize data for imx7ulp   Jaehoon Chung
• [PATCH v2 2/2] mmc: sdhci-esdhc-imx: Add HS400 support for iMX7ULP   Jaehoon Chung
  • [PATCH v2 2/2] mmc: sdhci-esdhc-imx: Add HS400 support for iMX7ULP   Igor Opaniuk
    • [PATCH v2 2/2] mmc: sdhci-esdhc-imx: Add HS400 support for iMX7ULP   Oleksandr Suvorov
• [PATCH 03/11] power: pmic: Consistently depend on DM_PMIC   Jaehoon Chung
  • [PATCH 03/11] power: pmic: Consistently depend on DM_PMIC   Igor Opaniuk
• [PATCH 04/11] power: pmic: Make the uclass optional in SPL   Jaehoon Chung
• [PATCH 05/11] power: pmic: Add a driver for X-Powers AXP PMICs   Jaehoon Chung
  • [PATCH 05/11] power: pmic: Add a driver for X-Powers AXP PMICs   Samuel Holland
• [PATCH 07/11] sunxi: pmic_bus: Fix Kconfig dependencies   Jaehoon Chung
• [PATCH v2 0/6] Fix FIT hash algos in SPL (Fixes v2021.10-rc3)   Alexandru Gagniuc
  • [PATCH v2 2/6] lib: Drop SHA512_ALGO in lieu of SHA512   Alexandru Gagniuc
    • [PATCH v2 2/6] lib: Drop SHA512_ALGO in lieu of SHA512   Tom Rini
    • [PATCH v2 2/6] lib: Drop SHA512_ALGO in lieu of SHA512   Andreas Schwab
  • [PATCH v2 3/6] common/spl: Drop [ST]PL_HASH_SUPPORT in favor of [ST]PL_HASH   Alexandru Gagniuc
    • [PATCH v2 3/6] common/spl: Drop [ST]PL_HASH_SUPPORT in favor of [ST]PL_HASH   Tom Rini
  • [PATCH v2 4/6] common: Move MD5 hash to hash_algo[] array.   Alexandru Gagniuc
    • [PATCH v2 4/6] common: Move MD5 hash to hash_algo[] array.   Tom Rini
  • [PATCH v2 5/6] image: Drop if/elseif hash selection in calculate_hash()   Alexandru Gagniuc
    • [PATCH v2 5/6] image: Drop if/elseif hash selection in calculate_hash()   Tom Rini
  • [PATCH v2 6/6] image: Drop IMAGE_ENABLE_{MD5, CRC32} #defines   Alexandru Gagniuc
    • [PATCH v2 6/6] image: Drop IMAGE_ENABLE_{MD5, CRC32} #defines   Tom Rini
• [PATCH v2 1/6] common: Remove unused CONFIG_FIT_SHAxxx selectors   Alexandru Gagniuc
  • [PATCH v2 1/6] common: Remove unused CONFIG_FIT_SHAxxx selectors   Tom Rini
• string literals in efi_loader code   AKASHI Takahiro
• [PATCH 0/3] Miscellaneous fixes of efi_tcg2   Masahisa Kojima
  • [PATCH 1/3] efi_loader: add missing parameter check for EFI_TCG2_PROTOCOL api   Masahisa Kojima
    • [PATCH 1/3] efi_loader: add missing parameter check for EFI_TCG2_PROTOCOL api   Ilias Apalodimas
  • [PATCH 2/3] efi_loader: fix boot_service_capability_min calculation   Masahisa Kojima
    • [PATCH 2/3] efi_loader: fix boot_service_capability_min calculation   Ilias Apalodimas
    • [PATCH 2/3] efi_loader: fix boot_service_capability_min calculation   Heinrich Schuchardt
      • [PATCH 2/3] efi_loader: fix boot_service_capability_min calculation   Masahisa Kojima
  • [PATCH 3/3] efi_loader: fix efi_tcg2_hash_log_extend_event() parameter check   Masahisa Kojima
    • [PATCH 3/3] efi_loader: fix efi_tcg2_hash_log_extend_event() parameter check   Ilias Apalodimas
    • [PATCH 3/3] efi_loader: fix efi_tcg2_hash_log_extend_event() parameter check   Heinrich Schuchardt
      • [PATCH 3/3] efi_loader: fix efi_tcg2_hash_log_extend_event() parameter check   Ilias Apalodimas
      • [PATCH 3/3] efi_loader: fix efi_tcg2_hash_log_extend_event() parameter check   Heinrich Schuchardt
• [PATCH v2 00/15] Add CAAM driver model support   Gaurav Jain
  • [PATCH v2 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
    • [PATCH v2 01/15] crypto/fsl: Add support for CAAM Job ring driver model   Ye Li
  • [PATCH v2 02/15] crypto/fsl: Add CAAM support for bkek, random number generation   Gaurav Jain
    • [PATCH v2 02/15] crypto/fsl: Add CAAM support for bkek, random number generation   Ye Li
  • [PATCH v2 03/15] i.MX8M: crypto: updated device tree for supporting DM in SPL   Gaurav Jain
    • [PATCH v2 03/15] i.MX8M: crypto: updated device tree for supporting DM in SPL   Ye Li
    • [PATCH v2 03/15] i.MX8M: crypto: updated device tree for supporting DM in SPL   Tim Harvey
      • [EXT] Re: [PATCH v2 03/15] i.MX8M: crypto: updated device tree for supporting DM in SPL   Gaurav Jain
      • [EXT] Re: [PATCH v2 03/15] i.MX8M: crypto: updated device tree for supporting DM in SPL   Tim Harvey
      • [EXT] Re: [PATCH v2 03/15] i.MX8M: crypto: updated device tree for supporting DM in SPL   Gaurav Jain
  • [PATCH v2 04/15] crypto/fsl: i.MX8M: Enable Job ring driver model in SPL and U-Boot.   Gaurav Jain
    • [PATCH v2 04/15] crypto/fsl: i.MX8M: Enable Job ring driver model in SPL and U-Boot.   Ye Li
  • [PATCH v2 05/15] i.MX6: Enable Job ring driver model in U-Boot.   Gaurav Jain
    • [PATCH v2 05/15] i.MX6: Enable Job ring driver model in U-Boot.   Ye Li
  • [PATCH v2 06/15] i.MX7: Enable Job ring driver model in U-Boot.   Gaurav Jain
    • [PATCH v2 06/15] i.MX7: Enable Job ring driver model in U-Boot.   Ye Li
  • [PATCH v2 07/15] i.MX7ULP: Enable Job ring driver model in U-Boot.   Gaurav Jain
    • [PATCH v2 07/15] i.MX7ULP: Enable Job ring driver model in U-Boot.   Ye Li
  • [PATCH v2 08/15] i.MX8: Add crypto node in device tree   Gaurav Jain
    • [PATCH v2 08/15] i.MX8: Add crypto node in device tree   Ye Li
  • [PATCH v2 09/15] crypto/fsl: i.MX8: Enable Job ring driver model in SPL and U-Boot.   Gaurav Jain
    • [PATCH v2 09/15] crypto/fsl: i.MX8: Enable Job ring driver model in SPL and U-Boot.   Ye Li
  • [PATCH v2 10/15] crypto/fsl: Fix kick_trng   Gaurav Jain
  • [PATCH v2 11/15] Layerscape: Add crypto node in device tree   Gaurav Jain
    • [PATCH v2 11/15] Layerscape: Add crypto node in device tree   Priyanka Jain (OSS)
  • [PATCH v2 12/15] Layerscape: Enable Job ring driver model in U-Boot.   Gaurav Jain
    • [PATCH v2 12/15] Layerscape: Enable Job ring driver model in U-Boot.   Priyanka Jain (OSS)
  • [PATCH v2 13/15] PPC: Add crypto node in device tree   Gaurav Jain
    • [PATCH v2 13/15] PPC: Add crypto node in device tree   Priyanka Jain (OSS)
  • [PATCH v2 14/15] PPC: Enable Job ring driver model in U-Boot   Gaurav Jain
    • [PATCH v2 14/15] PPC: Enable Job ring driver model in U-Boot   Priyanka Jain (OSS)
  • [PATCH v2 15/15] update CAAM MAINTAINER   Gaurav Jain
  • [PATCH v2 00/15] Add CAAM driver model support   Tim Harvey
    • [EXT] Re: [PATCH v2 00/15] Add CAAM driver model support   Gaurav Jain
• [PATCH 0/2] Fix qspi read and write issues   Michal Simek
• [PATCH] MAINTAINERS: Update ARM TI entry   Lokesh Vutla
  • [PATCH] MAINTAINERS: Update ARM TI entry   Nishanth Menon
  • [PATCH] MAINTAINERS: Update ARM TI entry   Tom Rini
  • [PATCH] MAINTAINERS: Update ARM TI entry   Tom Rini
• [PATCH] config/sifive_unmatched: add preboot commands   David Abdurachmanov
• [PATCH] arm: use CONFIG_SUPPORT_PASSING_ATAGS   Patrick Delaunay
  • [PATCH] arm: use CONFIG_SUPPORT_PASSING_ATAGS   Tom Rini
  • [PATCH] arm: use CONFIG_SUPPORT_PASSING_ATAGS   Tom Rini
• [PATCH 1/2] arm: dts: imx8mq: Add Kontron pitx-imx8m   Heiko Thiery
  • [PATCH 2/2] board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support   Heiko Thiery
• Pull request for efi-2021-10-rc2-2   Simon Glass
  • Pull request for efi-2021-10-rc2-2   Ilias Apalodimas
    • Pull request for efi-2021-10-rc2-2   Simon Glass
• Usage of device-tree for blobs   Simon Glass
• [PATCH v2 3/3] RFC: doc: Add documentation about devicetree usage   Simon Glass
  • [PATCH v2 3/3] RFC: doc: Add documentation about devicetree usage   Simon Glass
    • [PATCH v2 3/3] RFC: doc: Add documentation about devicetree usage   Tom Rini
• [GIT PULL] xilinx patches for v2021.10-rc4   Michal Simek
  • [GIT PULL] xilinx patches for v2021.10-rc4   Tom Rini
• [PATCH] spi: stm32: Add ofdata_to_platdata() callback   Patrick DELAUNAY
• [PATCH] arm: dts: imx8mp: Delete default clocks for clock controller node   ZHIZHIKIN Andrey
  • [PATCH] arm: dts: imx8mp: Delete default clocks for clock controller node   Peng Fan (OSS)
• [PATCH 0/9] ARM: tegra: Support EMC frequency tables on Tegra210   Thierry Reding
  • [PATCH 1/9] fdtdec: Allow using fdtdec_get_carveout() in loops   Thierry Reding
    • [PATCH 1/9] fdtdec: Allow using fdtdec_get_carveout() in loops   Simon Glass
  • [PATCH 2/9] fdtdec: Support retrieving the name of a carveout   Thierry Reding
    • [PATCH 2/9] fdtdec: Support retrieving the name of a carveout   Simon Glass
  • [PATCH 3/9] fdtdec: Support compatible string list for reserved memory   Thierry Reding
    • [PATCH 3/9] fdtdec: Support compatible string list for reserved memory   Simon Glass
  • [PATCH 4/9] fdtdec: Reorder fdtdec_set_carveout() parameters for consistency   Thierry Reding
    • [PATCH 4/9] fdtdec: Reorder fdtdec_set_carveout() parameters for consistency   Simon Glass
  • [PATCH 5/9] fdtdec: Support reserved-memory flags   Thierry Reding
    • [PATCH 5/9] fdtdec: Support reserved-memory flags   Simon Glass
  • [PATCH 6/9] ARM: tegra: Support multiple reserved memory regions   Thierry Reding
    • [PATCH 6/9] ARM: tegra: Support multiple reserved memory regions   Simon Glass
  • [PATCH 7/9] ARM: tegra: Support EMC frequency tables on Tegra210   Thierry Reding
    • [PATCH 7/9] ARM: tegra: Support EMC frequency tables on Tegra210   Simon Glass
  • [PATCH 8/9] ARM: tegra: Refactor DT update helpers   Thierry Reding
    • [PATCH 8/9] ARM: tegra: Refactor DT update helpers   Simon Glass
  • [PATCH 9/9] ARM: tegra: Copy memory-region-names property   Thierry Reding
    • [PATCH 9/9] ARM: tegra: Copy memory-region-names property   Simon Glass
• [PATCH] ARM: bcm283x: change the virtual address of the XHCI PCI device base   Stefan Agner
  • [PATCH] ARM: bcm283x: change the virtual address of the XHCI PCI device base   Matthias Brugger
• [BUG] USB boot issue on ROCKPro64 with UEFI   Vincent Stehlé
  • [PATCH WORKAROUND] clk: rk3399: do not disable the USB2PHY clk   Vincent Stehlé
  • [BUG] USB boot issue on ROCKPro64 with UEFI   Arnaud Patard (Rtp)
    • [BUG] USB boot issue on ROCKPro64 with UEFI   Vincent Stehlé
• [PATCH] sunxi: mmc: A20: Fix MMC optimisation   Andre Przywara
  • [PATCH] sunxi: mmc: A20: Fix MMC optimisation   Jaehoon Chung
• [PATCH 1/7] xyz-modem: Fix crash after cancelling transfer   Tom Rini
• [PATCH v2 1/1] riscv: show code leading to exception   Heinrich Schuchardt
  • [PATCH v2 1/1] riscv: show code leading to exception   Bin Meng
  • [PATCH v2 1/1] riscv: show code leading to exception   Sean Anderson
• [PATCH v2 1/1] configs: qemu-riscvXX_spl_defconfig enable CMD_SBI   Heinrich Schuchardt
  • [PATCH v2 1/1] configs: qemu-riscvXX_spl_defconfig enable CMD_SBI   Bin Meng
• Pull request for efi-2021-10-rc4   Heinrich Schuchardt
  • Pull request for efi-2021-10-rc4   Heinrich Schuchardt
    • Pull request for efi-2021-10-rc4   Tom Rini
  • Pull request for efi-2021-10-rc4   Tom Rini
    • Pull request for efi-2021-10-rc4   Heinrich Schuchardt
      • Pull request for efi-2021-10-rc4   Tom Rini
      • Pull request for efi-2021-10-rc4   Tom Rini
      • Pull request for efi-2021-10-rc4   Heinrich Schuchardt
      • Pull request for efi-2021-10-rc4   Tom Rini
      • Pull request for efi-2021-10-rc4   Heinrich Schuchardt
      • Pull request for efi-2021-10-rc4   Tom Rini
      • Pull request for efi-2021-10-rc4   Ilias Apalodimas
      • Pull request for efi-2021-10-rc4   AKASHI Takahiro
      • Pull request for efi-2021-10-rc4   Simon Glass
      • Pull request for efi-2021-10-rc4   Heinrich Schuchardt
      • Pull request for efi-2021-10-rc4   Tom Rini
      • Pull request for efi-2021-10-rc4   Simon Glass
      • Pull request for efi-2021-10-rc4   Heinrich Schuchardt
      • Pull request for efi-2021-10-rc4   Tom Rini
      • Pull request for efi-2021-10-rc4   Simon Glass
      • Pull request for efi-2021-10-rc4   Tom Rini
      • Pull request for efi-2021-10-rc4   Mark Kettenis
      • Pull request for efi-2021-10-rc4   François Ozog
      • Pull request for efi-2021-10-rc4   François Ozog
      • Pull request for efi-2021-10-rc4   Simon Glass
      • Pull request for efi-2021-10-rc4   François Ozog
• [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Marek Vasut
  • [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Tom Rini
    • [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Marek Vasut
      • [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Tom Rini
      • [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Marek Vasut
      • [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Tom Rini
      • [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Marek Vasut
      • [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Tom Rini
      • [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Marek Vasut
      • [PATCH 02/14] lmb: Use CONFIG_LMB_*_REGIONS only if they are defined   Tom Rini
• [PATCH 19/23] i2c: Convert CONFIG_POWER_I2C et al to Kconfig   Tom Rini
  • [PATCH 19/23] i2c: Convert CONFIG_POWER_I2C et al to Kconfig   Simon Glass
    • [PATCH 19/23] i2c: Convert CONFIG_POWER_I2C et al to Kconfig   Tom Rini
• [PATCH 3/5] arm: Disable ATAGs support   Stephan Gerhold
  • [PATCH 3/5] arm: Disable ATAGs support   Tom Rini
  • [PATCH 3/5] arm: Disable ATAGs support   Tom Rini
• [PATCH 01/23] mmc: Rename MMC_SUPPORT to MMC   Tom Rini
• [PATCH v3 0/3] riscv: enable SBI system reset   Heinrich Schuchardt
  • [PATCH v3 1/3] riscv: add missing SBI extension definitions   Heinrich Schuchardt
    • [PATCH v3 1/3] riscv: add missing SBI extension definitions   Bin Meng
  • [PATCH v3 2/3] cmd/sbi: use constants instead of numerical values   Heinrich Schuchardt
    • [PATCH v3 2/3] cmd/sbi: use constants instead of numerical values   Bin Meng
  • [PATCH v3 3/3] sysreset: provide SBI based sysreset driver   Heinrich Schuchardt
    • [PATCH v3 3/3] sysreset: provide SBI based sysreset driver   Bin Meng
      • [PATCH v3 3/3] sysreset: provide SBI based sysreset driver   Heinrich Schuchardt
      • [PATCH v3 3/3] sysreset: provide SBI based sysreset driver   Bin Meng
      • [PATCH v3 3/3] sysreset: provide SBI based sysreset driver   Heinrich Schuchardt
      • [PATCH v3 3/3] sysreset: provide SBI based sysreset driver   Bin Meng
      • [PATCH v3 3/3] sysreset: provide SBI based sysreset driver   Heinrich Schuchardt
      • [PATCH v3 3/3] sysreset: provide SBI based sysreset driver   Bin Meng
      • [PATCH v3 3/3] sysreset: provide SBI based sysreset driver   Heinrich Schuchardt
• [PATCH] serial: qcom: add support for GENI serial driver.   Ramon Fried
• Subject: [PATCH 2/6 v2] spmi: msm: add arbiter version 5 support   Ramon Fried
• Subject: [PATCH 3/6] pinctrl: qcom: add pinctrl and gpio drivers for SDM845   Ramon Fried
• Subject: [PATCH 4/6] clocks: qcom: add clocks for SDM845 debug uart   Ramon Fried
• Subject: [PATCH 5/6] SoC: qcom: add support for SDM845   Ramon Fried
• Subject: [PATCH 6/6] board: samsung: add Samsung Galaxy S9/S9+(SM-G96x0) board   Ramon Fried
• Subject: [PATCH 0/6] Add support for SDM845 based boards, and SM-G9600   Ramon Fried
• tftp time outs   Matteo Guglielmi
  • tftp time outs   Harm Berntsen
    • tftp time outs   Matteo Guglielmi
      • tftp time outs   Harm Berntsen
      • tftp time outs   Matteo Guglielmi
      • tftp time outs   Harm Berntsen
• [PATCH] mtd: spinand: macronix: Fix ECC Status Read   li.haolin at qq.com
• Booting from NAND on an Armada-370 based machine -> Invalid header checksum   Pali Rohár
  • Booting from NAND on an Armada-370 based machine -> Invalid header checksum   Uwe Kleine-König
  • Booting from NAND on an Armada-370 based machine -> Invalid header checksum   Uwe Kleine-König
• [PATCH] arm: mvebu : sata_mv should probe all ports   Tony Dinh
  • [PATCH] arm: mvebu : sata_mv should probe all ports   Stefan Roese
• [PATCH v2] Rename CONFIG_SPL_FIT_SHAxxx to CONFIG_SPL_SHAxxx   Chia-Wei Wang
• [PATCH v2 2/4] tools: mkimage: Add Allwinner TOC0 support   Andre Przywara
• [PATCH v2 3/4] sunxi: Support SPL in both eGON and TOC0 images   Andre Przywara
• [PATCH] efi_loader: boot_service_capability_min should be capitalized   Masahisa Kojima
  • [PATCH] efi_loader: boot_service_capability_min should be capitalized   Ilias Apalodimas
  • [PATCH] efi_loader: boot_service_capability_min should be capitalized   Heinrich Schuchardt
• [PATCH] Revert "mmc: sdhci: set to INT_DATA_END when there are data"   Yuezhang.Mo at sony.com
• [PULL] Pull request for u-boot master / v2021.10 = u-boot-stm32-20210906   Patrick DELAUNAY
  • [PULL] Pull request for u-boot master / v2021.10 = u-boot-stm32-20210906   Tom Rini
• [scan-admin at coverity.com: New Defects reported by Coverity Scan for Das U-Boot]   Oleh Kravchenko
  • [scan-admin at coverity.com: New Defects reported by Coverity Scan for Das U-Boot]   Tom Rini
  • [scan-admin at coverity.com: New Defects reported by Coverity Scan for Das U-Boot]   Tom Rini
• [PATCH] armv8: fsl-layerscape: Erratum A010315 needs PCIE support   Alban Bedel
• [PATCH] PinePhone: enable LED on boot for improved visual feedback   Arnaud Ferraris
  • [PATCH 2/2] pinephone_defconfig: add support for early-boot status LED   Arnaud Ferraris
    • [PATCH 2/2] pinephone_defconfig: add support for early-boot status LED   Andre Przywara
• [PATCH 1/2] board: sunxi: enable status LED early   Arnaud Ferraris
  • [PATCH 1/2] board: sunxi: enable status LED early   Andre Przywara
    • [PATCH 1/2] board: sunxi: enable status LED early   Arnaud Ferraris
      • [PATCH 1/2] board: sunxi: enable status LED early   Andre Przywara
• [PATCH] configs: add PineTab defconfig   Arnaud Ferraris
  • [PATCH] configs: add PineTab defconfig   Andre Przywara
• [PATCH] arm: marvell: Dreamplug: fix typo in eth1 name   Tony Dinh
  • [PATCH] arm: marvell: Dreamplug: fix typo in eth1 name   Stefan Roese
• [BUG] Pinebook Pro won't boot since ac804143cf, regression from -rc1   Tomasz Bielecki
• Disable command line access for uboot   Fariya F
• [PATCH v6] arm: add initial support for the Phytium Pomelo Board   nicholas_zheng at outlook.com
  • [PATCH v6] arm: add initial support for the Phytium Pomelo Board   Rob Herring
  • [PATCH v6] arm: add initial support for the Phytium Pomelo Board   Andre Przywara
• [PATCH 1/1] ARM: vexpress_ca9x4: Reintroduce board in order to use with QEMU.   Kristian Amlie
  • [PATCH 1/1] ARM: vexpress_ca9x4: Reintroduce board in order to use with QEMU.   Tom Rini
    • [PATCH 1/1] ARM: vexpress_ca9x4: Reintroduce board in order to use with QEMU.   Kristian Amlie
    • [PATCH 1/1] Avoid polluting CONFIG_ namespace with board specific define.   Kristian Amlie
      • [PATCH 1/1] Avoid polluting CONFIG_ namespace with board specific define.   Tom Rini
      • [PATCH 1/1] Avoid polluting CONFIG_ namespace with board specific define.   Tom Rini
  • [PATCH 1/1] ARM: vexpress_ca9x4: Reintroduce board in order to use with QEMU.   Tom Rini
• [PATCH 1/1] efi_loader: require CONFIG_BLK   Heinrich Schuchardt
  • [PATCH 1/1] efi_loader: require CONFIG_BLK   AKASHI Takahiro
    • [PATCH 1/1] efi_loader: require CONFIG_BLK   Heinrich Schuchardt
      • [PATCH 1/1] efi_loader: require CONFIG_BLK   Simon Glass
• [PATCH] board: fsl_validate: Double free Issue Solved   Kshitiz Varshney
• [PULL] u-boot-riscv/master   Leo Liang
  • [PULL] u-boot-riscv/master   Tom Rini
• [PATCH 1/4] ARM: dts: at91: sama5d2_icp: add QSPI1 device   Eugen.Hristev at microchip.com
• [PATCH u-boot-marvell v2 00/39] kwboot higher baudrate   Marek Behún
  • [PATCH u-boot-marvell v2 01/39] tools: kwbimage: Fix printf format warning   Marek Behún
  • [PATCH u-boot-marvell v2 02/39] tools: kwboot: Fix buffer overflow in kwboot_terminal()   Marek Behún
  • [PATCH u-boot-marvell v2 03/39] tools: kwboot: Make the quit sequence buffer const   Marek Behún
  • [PATCH u-boot-marvell v2 04/39] tools: kwboot: Refactor and fix writing buffer   Marek Behún
  • [PATCH u-boot-marvell v2 05/39] tools: kwboot: Print version information header   Marek Behún
  • [PATCH u-boot-marvell v2 06/39] tools: kwboot: Fix kwboot_xm_sendblock() function when kwboot_tty_recv() fails   Marek Behún
  • [PATCH u-boot-marvell v2 07/39] tools: kwboot: Fix return type of kwboot_xm_makeblock() function   Marek Behún
  • [PATCH u-boot-marvell v2 08/39] tools: kwboot: Fix comparison of integers with different size   Marek Behún
  • [PATCH u-boot-marvell v2 09/39] tools: kwboot: Fix printing progress   Marek Behún
  • [PATCH u-boot-marvell v2 10/39] tools: kwboot: Print newline on error when progress was not completed   Marek Behún
  • [PATCH u-boot-marvell v2 11/39] tools: kwboot: Split sending image into header and data stages   Marek Behún
  • [PATCH u-boot-marvell v2 12/39] tools: kwboot: Use a function to check whether received byte is a Xmodem reply   Marek Behún
  • [PATCH u-boot-marvell v2 13/39] tools: kwboot: Allow non-xmodem text output from BootROM only in a specific case   Marek Behún
  • [PATCH u-boot-marvell v2 14/39] tools: kwboot: Print new line after SPL output   Marek Behún
  • [PATCH u-boot-marvell v2 15/39] tools: kwboot: Allow greater timeout when executing header code   Marek Behún
    • [PATCH u-boot-marvell v2 15/39] tools: kwboot: Allow greater timeout when executing header code   Marek Behún
  • [PATCH u-boot-marvell v2 16/39] tools: kwboot: Prevent waiting indefinitely if no xmodem reply is received   Marek Behún
  • [PATCH u-boot-marvell v2 19/39] tools: kwbimage: Simplify iteration over version 1 optional headers   Marek Behún
  • [PATCH u-boot-marvell v2 20/39] tools: kwboot: Don't patch image header if signed   Marek Behún
  • [PATCH u-boot-marvell v2 21/39] tools: kwboot: Patch source address in image header   Marek Behún
  • [PATCH u-boot-marvell v2 22/39] tools: kwboot: Patch destination address to DDR area for SPI image   Marek Behún
  • [PATCH u-boot-marvell v2 23/39] tools: kwbimage: Refactor image_version()   Marek Behún
  • [PATCH u-boot-marvell v2 24/39] tools: kwbimage: Refactor kwbimage header size determination   Marek Behún
  • [PATCH u-boot-marvell v2 25/39] tools: kwbimage: Update comments describing kwbimage v1 structures   Marek Behún
  • [PATCH u-boot-marvell v2 26/39] tools: kwboot: Round up header size to 128 B when patching   Marek Behún
  • [PATCH u-boot-marvell v2 27/39] tools: kwboot: Explicitly check against size of struct main_hdr_v1   Marek Behún
  • [PATCH u-boot-marvell v2 28/39] tools: kwboot: Support higher baudrates when booting via UART   Marek Behún
  • [PATCH u-boot-marvell v2 30/39] tools: kwboot: Check whether baudrate was set to requested value   Marek Behún
  • [PATCH u-boot-marvell v2 32/39] kwboot: Disable tty interbyte timeout   Marek Behún
    • [PATCH u-boot-marvell v2 32/39] kwboot: Disable tty interbyte timeout   Marek Behún
  • [PATCH u-boot-marvell v2 33/39] tools: kwboot: Disable non-blocking mode   Marek Behún
  • [PATCH u-boot-marvell v2 34/39] tools: kwboot: Cosmetic fix   Marek Behún
  • [PATCH u-boot-marvell v2 35/39] tools: kwboot: Avoid code repetition in kwboot_img_patch()   Marek Behún
  • [PATCH u-boot-marvell v2 36/39] tools: kwboot: Update file header   Marek Behún
  • [PATCH u-boot-marvell v2 37/39] tools: kwboot: Add Pali and Marek as authors   Marek Behún
  • [PATCH u-boot-marvell v2 38/39] doc/kwboot.1: Update man page   Marek Behún
  • [PATCH u-boot-marvell v2 39/39] MAINTAINERS: Add entry for kwbimage / kwboot tools   Marek Behún
• [PATCH 2/3] usb: gadget: Add CDC ACM function   Loic Poulain
  • [PATCH 2/3] usb: gadget: Add CDC ACM function   Pali Rohár
• [PATCH 0/2] Support SPL for i.MX7ULP   Oleksandr Suvorov
  • [PATCH 1/2] mx7ulp: select soc features   Oleksandr Suvorov
    • [PATCH 2/2] mx7ulp: add base SPL support for mx7ulp   Oleksandr Suvorov
      • [PATCH 2/2] mx7ulp: add base SPL support for mx7ulp   Fabio Estevam
      • [PATCH 2/2] mx7ulp: add base SPL support for mx7ulp   Oleksandr Suvorov
• [PATCH u-boot-marvell] arm: a37xx: pci: Don't spam about PIO Response Status   Marek Behún
  • [PATCH u-boot-marvell] arm: a37xx: pci: Don't spam about PIO Response Status   Pali Rohár
  • [PATCH u-boot-marvell] arm: a37xx: pci: Don't spam about PIO Response Status   Stefan Roese
• [PATCH u-boot] dm: pci: Fix handling of errors when scanning device   Marek Behún
  • [PATCH u-boot] dm: pci: Fix handling of errors when scanning device   Bin Meng
    • [PATCH u-boot] dm: pci: Fix handling of errors when scanning device   Marek Behún
      • [PATCH u-boot] dm: pci: Fix handling of errors when scanning device   Bin Meng
      • [PATCH u-boot] dm: pci: Fix handling of errors when scanning device   Pali Rohár
  • [PATCH u-boot] dm: pci: Fix handling of errors when scanning device   Stefan Roese
    • [PATCH u-boot] dm: pci: Fix handling of errors when scanning device   Simon Glass
• [PATCH] arm: dts: sun50i-h6-orangepi-3: disable aldo2 regulator   Maxim Karasev
• [PATCH 0/4] Repeal and replace TZDRAM_ related config options   Alexandru Gagniuc
  • [PATCH 1/4] lib: optee: Avoid CONFIG_TZDRAM_* in optee_verify_bootm_image()   Alexandru Gagniuc
  • [PATCH 2/4] lib: optee: Remove CONFIG_OPTEE_TZDRAM_BASE   Alexandru Gagniuc
  • [PATCH 3/4] lib: optee: Remove CONFIG_OPTEE_LOAD_ADDR   Alexandru Gagniuc
  • [PATCH 4/4] arm: imx: mx7: Move CONFIG_OPTEE_TZDRAM_SIZE from lib/optee   Alexandru Gagniuc
• [PATCH v2 0/5] arm: mach-k3: Fixes for j721e/j7200 clock data and drivers   Dave Gerlach
  • [PATCH v2 2/5] arm: mach-k3: j7200: Fix clk-data parenting for postdiv PLL clocks   Dave Gerlach
    • [PATCH v2 2/5] arm: mach-k3: j7200: Fix clk-data parenting for postdiv PLL clocks   Tom Rini
  • [PATCH v2 4/5] clk: ti: k3-pll: Change DIV_CTRL programming to read-modify-write   Dave Gerlach
    • [PATCH v2 4/5] clk: ti: k3-pll: Change DIV_CTRL programming to read-modify-write   Tom Rini
  • [PATCH v2 5/5] clk: ti: k3: Update driver to account for divider flags   Dave Gerlach
    • [PATCH v2 5/5] clk: ti: k3: Update driver to account for divider flags   Tom Rini
• [PATCH v2 1/5] arm: mach-k3: j721e: Fix clk-data parenting for postdiv PLL clocks   Dave Gerlach
  • [PATCH v2 1/5] arm: mach-k3: j721e: Fix clk-data parenting for postdiv PLL clocks   Tom Rini
• [PATCH v2 3/5] arm: mach-k3: Add note to auto-generated files   Dave Gerlach
  • [PATCH v2 3/5] arm: mach-k3: Add note to auto-generated files   Tom Rini
• [PATCH v2 00/11] stm32mp1: Support falcon mode with OP-TEE payloads   Alexandru Gagniuc
  • [PATCH v2 01/11] spl: Move SYS_MMCSD_RAW_MODE_KERNEL_SECTOR to Kconfig   Alexandru Gagniuc
  • [PATCH v2 02/11] stm32mp1: Add support for baudrates higher than 115200   Alexandru Gagniuc
  • [PATCH v2 03/11] stm32mp1: Add support for falcon mode boot from SD card   Alexandru Gagniuc
  • [PATCH v2 04/11] board: stm32mp1: Implement board_fit_config_name_match() for SPL   Alexandru Gagniuc
  • [PATCH v2 05/11] fdt_support: Implement fdt_ethernet_set_macaddr()   Alexandru Gagniuc
  • [PATCH v2 06/11] arm: stm32mp: bsec: Update OTP shadow registers in SPL   Alexandru Gagniuc
  • [PATCH v2 07/11] arm: stm32mp: Factor out reading MAC address from OTP   Alexandru Gagniuc
  • [PATCH v2 08/11] stm32mp1: spl: Configure MAC address when booting OP-TEE   Alexandru Gagniuc
  • [PATCH v2 09/11] lib: Makefile: Make optee library available in SPL   Alexandru Gagniuc
  • [PATCH v2 10/11] ARM: dts: stm32mp: Add OP-TEE "/firmware" node to SPL dtb   Alexandru Gagniuc
  • [PATCH v2 11/11] stm32mp1: spl: Copy optee nodes to target FDT for OP-TEE payloads   Alexandru Gagniuc
• [PATCH 1/5] Convert CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig   Tom Rini
• [PATCH 2/5] imx: Convert SERIAL_TAG support to ENV_VARS_UBOOT_RUNTIME_CONFIG   Tom Rini
• [PATCH 4/5] arm: Add Kconfig entry for MACH_TYPE   Tom Rini
• [PATCH 5/5] arm: Finish migration of CONFIG_MACH_TYPE   Tom Rini
• [PATCH] sf: Querying write-protect status before operating the flash   chaochao2021666
  • [PATCH] sf: Querying write-protect status before operating the flash   Jan Kiszka
• U-boot patches   Sjöberg Andreas
  • U-boot patches   Tom Rini
• [PATCH 0/2] mtd: spi-nor: Add support for Spansion S25FL256L   tkuw584924 at gmail.com
  • [PATCH 1/2] mtd: spi-nor-ids: Add support for Spansion S25FL256L   tkuw584924 at gmail.com
    • [PATCH 1/2] mtd: spi-nor-ids: Add support for Spansion S25FL256L   Pratyush Yadav
  • [PATCH 2/2] mtd: spi-nor-core: Add fixups for Spansion S25FL256L   tkuw584924 at gmail.com
    • [PATCH 2/2] mtd: spi-nor-core: Add fixups for Spansion S25FL256L   Pratyush Yadav
      • [PATCH 2/2] mtd: spi-nor-core: Add fixups for Spansion S25FL256L   Takahiro Kuwano
• [PATCH] pinctrl: fix typo   Yuan Fang
  • [PATCH] pinctrl: fix typo   Tom Rini
• [PATCH] pci: layerscape: Fix the LUT and msi-map mismatch issue   Zhiqiang Hou
• [PATCH v3 0/2] Refactor and improve full help output from tools   Paul Barker
  • [PATCH v3 1/2] tools: Refactor full help printing   Paul Barker
  • [PATCH v3 2/2] tools: Handle PAGER containing arguments   Paul Barker
• [PATCH v4 0/2] Refactor and improve full help output from tools   Paul Barker
  • [PATCH v4 1/2] tools: Refactor full help printing   Paul Barker
    • [PATCH v4 1/2] tools: Refactor full help printing   Tom Rini
  • [PATCH v4 2/2] tools: Handle PAGER containing arguments   Paul Barker
    • [PATCH v4 2/2] tools: Handle PAGER containing arguments   Tom Rini
• [PATCH] pci: pcie_dw_meson: fix usb fail when pci link fails to go up   Neil Armstrong
  • [PATCH] pci: pcie_dw_meson: fix usb fail when pci link fails to go up   Bin Meng
  • [PATCH] pci: pcie_dw_meson: fix usb fail when pci link fails to go up   Neil Armstrong
• [PATCH] arm: imx8mp-evk: CLOCK Enable SPI and QOS clock   Ramon Fried
  • [PATCH] arm: imx8mp-evk: CLOCK Enable SPI and QOS clock   Peng Fan (OSS)
• imx: imx8mq: mxc_get_clock for MXC_I2C_CLK is missing   Heiko Thiery
  • imx: imx8mq: mxc_get_clock for MXC_I2C_CLK is missing   Heiko Thiery
    • imx: imx8mq: mxc_get_clock for MXC_I2C_CLK is missing   Heiko Thiery
      • imx: imx8mq: mxc_get_clock for MXC_I2C_CLK is missing   Heiko Thiery
  • imx: imx8mq: mxc_get_clock for MXC_I2C_CLK is missing   Peng Fan (OSS)
• Hints on how to use efi_driver/efi_block_device.c   Simon Glass
• [PATCH 00/35] efi: Improvements to U-Boot running on top of UEFI   Simon Glass
  • [PATCH 01/35] x86: Keep symbol information in u-boot ELF file   Simon Glass
  • [PATCH 02/35] x86: Create a new header for EFI   Simon Glass
    • [PATCH 02/35] x86: Create a new header for EFI   Heinrich Schuchardt
      • [PATCH 02/35] x86: Create a new header for EFI   Simon Glass
      • [PATCH 02/35] x86: Create a new header for EFI   Heinrich Schuchardt
      • [PATCH 02/35] x86: Create a new header for EFI   Simon Glass
  • [PATCH 03/35] x86: Show some EFI info with the bdinfo command   Simon Glass
    • [PATCH 03/35] x86: Show some EFI info with the bdinfo command   Heinrich Schuchardt
      • [PATCH 03/35] x86: Show some EFI info with the bdinfo command   Simon Glass
      • [PATCH 03/35] x86: Show some EFI info with the bdinfo command   Heinrich Schuchardt
      • [PATCH 03/35] x86: Show some EFI info with the bdinfo command   Simon Glass
  • [PATCH 04/35] x86: Tidy up global_data pointer for 64-bit   Simon Glass
    • [PATCH 04/35] x86: Tidy up global_data pointer for 64-bit   Heinrich Schuchardt
  • [PATCH 05/35] efi: Add a script for building and testing U-Boot on UEFI   Simon Glass
  • [PATCH 06/35] x86: Create a 32/64-bit selection for the app   Simon Glass
    • [PATCH 06/35] x86: Create a 32/64-bit selection for the app   Heinrich Schuchardt
      • [PATCH 06/35] x86: Create a 32/64-bit selection for the app   Simon Glass
  • [PATCH 07/35] efi: Create a 64-bit app   Simon Glass
    • [PATCH 07/35] efi: Create a 64-bit app   Heinrich Schuchardt
  • [PATCH 08/35] x86: Don't duplicate global_ptr in 64-bit EFI app   Simon Glass
  • [PATCH 09/35] efi: Add a way to obtain boot services in the app   Simon Glass
  • [PATCH 10/35] efi: Add video support to the app   Simon Glass
    • [PATCH 10/35] efi: Add video support to the app   Heinrich Schuchardt
      • [PATCH 10/35] efi: Add video support to the app   Simon Glass
  • [PATCH 11/35] RFC: efi: Drop code that doesn't work with driver model   Simon Glass
    • [PATCH 11/35] RFC: efi: Drop code that doesn't work with driver model   Heinrich Schuchardt
      • [PATCH 11/35] RFC: efi: Drop code that doesn't work with driver model   Simon Glass
      • [PATCH 11/35] RFC: efi: Drop code that doesn't work with driver model   Heinrich Schuchardt
      • [PATCH 11/35] RFC: efi: Drop code that doesn't work with driver model   Simon Glass
      • [PATCH 11/35] RFC: efi: Drop code that doesn't work with driver model   Tom Rini
      • [PATCH 11/35] RFC: efi: Drop code that doesn't work with driver model   Mark Kettenis
      • [PATCH 11/35] RFC: efi: Drop code that doesn't work with driver model   Tom Rini
      • [PATCH 11/35] RFC: efi: Drop code that doesn't work with driver model   Mark Kettenis
      • [PATCH 11/35] RFC: efi: Drop code that doesn't work with driver model   Tom Rini
      • [PATCH 11/35] RFC: efi: Drop code that doesn't work with driver model   Simon Glass
      • [PATCH 11/35] RFC: efi: Drop code that doesn't work with driver model   Mark Kettenis
      • [PATCH 11/35] RFC: efi: Drop code that doesn't work with driver model   Simon Glass
  • [PATCH 12/35] efi: Add EFI uclass for media   Simon Glass
    • [PATCH 12/35] efi: Add EFI uclass for media   Heinrich Schuchardt
      • [PATCH 12/35] efi: Add EFI uclass for media   Simon Glass
  • [PATCH 13/35] efi: Add a media/block driver for EFI block devices   Simon Glass
    • [PATCH 13/35] efi: Add a media/block driver for EFI block devices   Heinrich Schuchardt
      • [PATCH 13/35] efi: Add a media/block driver for EFI block devices   Simon Glass
      • [PATCH 13/35] efi: Add a media/block driver for EFI block devices   Heinrich Schuchardt
      • [PATCH 13/35] efi: Add a media/block driver for EFI block devices   Simon Glass
  • [PATCH 14/35] efi: Locate all block devices in the app   Simon Glass
    • [PATCH 14/35] efi: Locate all block devices in the app   Heinrich Schuchardt
      • [PATCH 14/35] efi: Locate all block devices in the app   AKASHI Takahiro
      • [PATCH 14/35] efi: Locate all block devices in the app   Simon Glass
      • [PATCH 14/35] efi: Locate all block devices in the app   AKASHI Takahiro
      • [PATCH 14/35] efi: Locate all block devices in the app   Simon Glass
  • [PATCH 15/35] patman: Use a ValueError exception if tools.Run() fails   Simon Glass
  • [PATCH 16/35] binman: Report an error if test files fail to compile   Simon Glass
  • [PATCH 17/35] binman: Support reading the offset of an ELF-file symbol   Simon Glass
  • [PATCH 18/35] binman: Allow timeout to occur in the image or its section   Simon Glass
  • [PATCH 19/35] binman: Tidy up comments on _DoTestFile()   Simon Glass
  • [PATCH 20/35] binman: Support updating the dtb in an ELF file   Simon Glass
  • [PATCH 21/35] efi: serial: Support arrow keys   Simon Glass
  • [PATCH 22/35] bloblist: Move to rST format   Simon Glass
    • [PATCH 22/35] bloblist: Move to rST format   Heinrich Schuchardt
  • [PATCH 23/35] bloblist: Support allocating the bloblist   Simon Glass
  • [PATCH 24/35] x86: Allow booting a kernel from the EFI app   Simon Glass
    • [PATCH 24/35] x86: Allow booting a kernel from the EFI app   Heinrich Schuchardt
      • [PATCH 24/35] x86: Allow booting a kernel from the EFI app   Simon Glass
  • [PATCH 25/35] x86: Don't process the kernel command line unless enabled   Simon Glass
  • [PATCH 26/35] x86: efi: Add room for the binman definition in the dtb   Simon Glass
  • [PATCH 27/35] efi: Add comments to struct efi_priv   Simon Glass
  • [PATCH 28/35] efi: Fix ll_boot_init() operation with the app   Simon Glass
  • [PATCH 29/35] efi: Add a few comments to the stub   Simon Glass
  • [PATCH 30/35] efi: Share struct efi_priv between the app and stub code   Simon Glass
  • [PATCH 31/35] efi: Move exit_boot_services into a function   Simon Glass
  • [PATCH 32/35] efi: Check for failure when initing the app   Simon Glass
  • [PATCH 33/35] efi: Mention that efi_info_get() is only used in the stub   Simon Glass
  • [PATCH 34/35] efi: Show when allocated pages are used   Simon Glass
    • [PATCH 34/35] efi: Show when allocated pages are used   Heinrich Schuchardt
      • [PATCH 34/35] efi: Show when allocated pages are used   Simon Glass
      • [PATCH 34/35] efi: Show when allocated pages are used   Heinrich Schuchardt
      • [PATCH 34/35] efi: Show when allocated pages are used   Simon Glass
  • [PATCH 35/35] efi: Allow easy selection of serial-only operation   Simon Glass
  • [PATCH 00/35] efi: Improvements to U-Boot running on top of UEFI   Bin Meng
    • [PATCH 00/35] efi: Improvements to U-Boot running on top of UEFI   Tom Rini
• tools: Check for already migrated symbols in a given file   Tom Rini
• [PATCH] doc: board: toradex: fix file names   Oleksandr Suvorov
  • [PATCH] doc: board: toradex: fix file names   Heinrich Schuchardt
  • [PATCH] doc: board: toradex: fix file names   Igor Opaniuk
  • [PATCH] doc: board: toradex: fix file names   Francesco Dolcini
  • [PATCH] doc: board: toradex: fix file names   Marcel Ziswiler
    • [PATCH] doc: board: toradex: fix file names   Oleksandr Suvorov
• [PATCH v2 1/9] ARM: meson: Sync Amlogic DT from Linux 5.14   Neil Armstrong
  • [PATCH v2 8/9] ARM: meson: add Beelink GS-King X board   Neil Armstrong
  • [PATCH v2 9/9] ARM: amlogic: add Banana Pi M5   Neil Armstrong
  • [PATCH v2 1/9] ARM: meson: Sync Amlogic DT from Linux 5.14   Tom Rini
    • [PATCH v2 1/9] ARM: meson: Sync Amlogic DT from Linux 5.14   Neil Armstrong
      • [PATCH v2 1/9] ARM: meson: Sync Amlogic DT from Linux 5.14   Tom Rini
  • [PATCH v2 1/9] ARM: meson: Sync Amlogic DT from Linux 5.14   Vyacheslav
  • [PATCH v2 1/9] ARM: meson: Sync Amlogic DT from Linux 5.14   Neil Armstrong
• [PATCH v2 2/9] ARM: meson: keep HW order for MMC devices   Neil Armstrong
• [PATCH v2 3/9] ARM: meson-axg: remove local USB nodes   Neil Armstrong
• [PATCH v2 4/9] configs: meson64: add SCSI boot target   Neil Armstrong
• [PATCH v2 5/9] distro_bootcmd: run pci enum for scsi_boot just like it is done for nvme_boot   Neil Armstrong
• [PATCH v2 6/9] ARM: amlogic: add support for Odroid-HC4 device   Neil Armstrong
• [PATCH v2 7/9] doc: boards: amlogic: update for Odroid HC4   Neil Armstrong
• U-Boot Digest, Vol 158, Issue 63   Tom Rini
• cdns_wdt: who enables the clock   Jorge Ramirez-Ortiz, Foundries
  • cdns_wdt: who enables the clock   Michal Simek
    • cdns_wdt: who enables the clock   Jorge Ramirez-Ortiz, Foundries
• [PATCH] board: sl28: enable EFI_SET_TIME support   Michael Walle
• [PATCH v3 0/2] mmc: fsl_esdhc_imx: initialize data for imx7ulp   Oleksandr Suvorov
  • [PATCH v3 1/2] mmc: fsl_esdhc_imx: initialize data for imx7ulp   Oleksandr Suvorov
    • [PATCH v3 2/2] mmc: sdhci-esdhc-imx: Add HS400 support for iMX7ULP   Oleksandr Suvorov
    • [PATCH v3 1/2] mmc: fsl_esdhc_imx: initialize data for imx7ulp   Igor Opaniuk
• [PATCH v2 0/2] PinePhone: enable LED on boot for improved   Arnaud Ferraris
  • [PATCH v2 1/2] board: sunxi: enable status LED early   Arnaud Ferraris
    • [PATCH v2 1/2] board: sunxi: enable status LED early   Samuel Holland
  • [PATCH v2 2/2] pinephone_defconfig: add support for early-boot status LED   Arnaud Ferraris
    • [PATCH v2 2/2] pinephone_defconfig: add support for early-boot status LED   Samuel Holland
• [PATCH V2] arm: mach-k3: am6_init: Prioritize MSMC traffic over DDR in NAVSS Northbridge   Nishanth Menon
  • [PATCH V2] arm: mach-k3: am6_init: Prioritize MSMC traffic over DDR in NAVSS Northbridge   Tom Rini
• [PATCH] efi_loader: Remove incorrect calls of EFI_CALL in TCG2   Ilias Apalodimas
  • [PATCH] efi_loader: Remove incorrect calls of EFI_CALL in TCG2   Heinrich Schuchardt
  • [PATCH] efi_loader: Remove incorrect calls of EFI_CALL in TCG2   AKASHI Takahiro
• [PATCH 1/1] configs: add mkeficapsule to tools-only_defconfig   Heinrich Schuchardt
  • [PATCH 1/1] configs: add mkeficapsule to tools-only_defconfig   AKASHI Takahiro
    • [PATCH 1/1] configs: add mkeficapsule to tools-only_defconfig   Heinrich Schuchardt
      • [PATCH 1/1] configs: add mkeficapsule to tools-only_defconfig   AKASHI Takahiro
      • [PATCH 1/1] configs: add mkeficapsule to tools-only_defconfig   Tom Rini
      • [PATCH 1/1] configs: add mkeficapsule to tools-only_defconfig   AKASHI Takahiro
      • [PATCH 1/1] configs: add mkeficapsule to tools-only_defconfig   Tom Rini
      • [PATCH 1/1] configs: add mkeficapsule to tools-only_defconfig   AKASHI Takahiro
      • [PATCH 1/1] configs: add mkeficapsule to tools-only_defconfig   Tom Rini
      • [PATCH 1/1] configs: add mkeficapsule to tools-only_defconfig   AKASHI Takahiro
      • [PATCH 1/1] configs: add mkeficapsule to tools-only_defconfig   Tom Rini
      • [PATCH 1/1] configs: add mkeficapsule to tools-only_defconfig   Heinrich Schuchardt
      • [PATCH 1/1] configs: add mkeficapsule to tools-only_defconfig   Tom Rini
• [PATCH] efi_loader: eliminate EFI_CALL() in nvedit_efi.c   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: simplify efi_watchdog_timer_notify()   Heinrich Schuchardt
• Driver model at UEFI runtime   Heinrich Schuchardt
  • Driver model at UEFI runtime   Simon Glass
    • Driver model at UEFI runtime   Heinrich Schuchardt
      • Driver model at UEFI runtime   Simon Glass
      • Driver model at UEFI runtime   Mark Kettenis
      • Driver model at UEFI runtime   Heinrich Schuchardt
  • Driver model at UEFI runtime   Bin Meng
    • Driver model at UEFI runtime   François Ozog
      • Driver model at UEFI runtime   Bin Meng
      • Driver model at UEFI runtime   François Ozog
      • Driver model at UEFI runtime   Ilias Apalodimas
      • Driver model at UEFI runtime   Mark Kettenis
      • Driver model at UEFI runtime   Heinrich Schuchardt
      • Driver model at UEFI runtime   Michael Walle
      • Driver model at UEFI runtime   Heinrich Schuchardt
      • Driver model at UEFI runtime   Michael Walle
      • Driver model at UEFI runtime   Heinrich Schuchardt
      • Driver model at UEFI runtime   François Ozog
      • Driver model at UEFI runtime   Michael Walle
      • Driver model at UEFI runtime   François Ozog
      • Driver model at UEFI runtime   Michael Walle
      • Driver model at UEFI runtime   François Ozog
      • Driver model at UEFI runtime   Mark Kettenis
      • Driver model at UEFI runtime   Heinrich Schuchardt
• [PATCH v2] cmd: ubi: add a command to swap volumes   Ayoub Zaki
  • [PATCH v2] cmd: ubi: add a command to swap volumes   Heiko Schocher
  • [PATCH v2] cmd: ubi: add a command to swap volumes   Wolfgang Denk
• [PATCH 1/6] arm: Remove flea3 board   Tom Rini
  • [PATCH 2/6] arm: Remove aspenite board   Tom Rini
    • [PATCH 2/6] arm: Remove aspenite board   Stefan Roese
  • [PATCH 3/6] arm: Remove zmx25 board and ARCH_MX25   Tom Rini
  • [PATCH 4/6] arm: Remove bg0900 board   Tom Rini
  • [PATCH 5/6] arm: Remove edminiv2 board and orion5x support   Tom Rini
    • [PATCH 5/6] arm: Remove edminiv2 board and orion5x support   Stefan Roese
      • [PATCH 5/6] arm: Remove edminiv2 board and orion5x support   Simon Guinot
      • [PATCH 5/6] arm: Remove edminiv2 board and orion5x support   Tom Rini
      • [PATCH 5/6] arm: Remove edminiv2 board and orion5x support   Stefan Roese
      • [PATCH 5/6] arm: Remove edminiv2 board and orion5x support   Simon Guinot
      • [PATCH 5/6] arm: Remove edminiv2 board and orion5x support   Tom Rini
      • [PATCH 5/6] arm: Remove edminiv2 board and orion5x support   Simon Guinot
  • [PATCH 6/6] ppc: Remove MPC8349EMDS board and ARCH_MPC8349 support   Tom Rini
  • [PATCH 1/6] arm: Remove flea3 board   Stefano Babic
• [PATCH] arm: imx: imx8mq: add support to get values for more clocks   Heiko Thiery
  • [PATCH] arm: imx: imx8mq: add support to get values for more clocks   Peng Fan (OSS)
• [PATCH v4 0/3] riscv: enable SBI system reset   Heinrich Schuchardt
  • [PATCH v4 1/3] riscv: add missing SBI extension definitions   Heinrich Schuchardt
    • [PATCH v4 1/3] riscv: add missing SBI extension definitions   Bin Meng
  • [PATCH v4 2/3] cmd/sbi: use constants instead of numerical values   Heinrich Schuchardt
    • [PATCH v4 2/3] cmd/sbi: use constants instead of numerical values   Bin Meng
  • [PATCH v4 3/3] sysreset: provide SBI based sysreset driver   Heinrich Schuchardt
    • [PATCH v4 3/3] sysreset: provide SBI based sysreset driver   Bin Meng
      • [PATCH v4 3/3] sysreset: provide SBI based sysreset driver   Bin Meng
• [PATCH v2 1/2] GPIO: fxl6408: Add support for FXL6408 GPIO expander   Marcel Ziswiler
  • [PATCH v2 1/2] GPIO: fxl6408: Add support for FXL6408 GPIO expander   Oleksandr Suvorov
• [PATCH 0/3] stm32mp: Attempt to resolve unintended breakage with v2021.10-rc2   Alexandru Gagniuc
  • [PATCH 1/3] stm32mp: Rename FIP config to stm32mp15_tfaboot_fip_defconig   Alexandru Gagniuc
  • [PATCH 2/3] arm: Kconfig: Introduce a TFABOOT_FIP_CONTAINER option   Alexandru Gagniuc
  • [PATCH 3/3] stm32mp1: Replace STM32MP15x_STM32IMAGE with TFABOOT_FIP_CONTAINER   Alexandru Gagniuc
  • [PATCH 0/3] stm32mp: Attempt to resolve unintended breakage with v2021.10-rc2   Patrick DELAUNAY
• [PATCH] Kconfig: Drop duplicate 'select SHA512' instances   Tom Rini
  • [PATCH] Kconfig: Drop duplicate 'select SHA512' instances   Alex G.
    • [PATCH] Kconfig: Drop duplicate 'select SHA512' instances   Tom Rini
• [PATCH] imx8mm_beacon: Switch to binman for generating image   Adam Ford
  • [PATCH] imx8mm_beacon: Switch to binman for generating image   Fabio Estevam
• [PATCH v2] doc: board: toradex: fix file names   Oleksandr Suvorov
• Subject: [PATCH 2/6 v3] spmi: msm: add arbiter version 5 support   Ramon Fried
  • Subject: [PATCH 2/6 v3] spmi: msm: add arbiter version 5 support   Dzmitry Sankouski
• Subject: [PATCH 6/6 v2] board: samsung: add Samsung Galaxy S9/S9+(SM-G96x0) board   Ramon Fried
  • Subject: [PATCH 6/6 v2] board: samsung: add Samsung Galaxy S9/S9+(SM-G96x0) board   Dzmitry Sankouski
• [PATCH v3 0/3] doc: Clarify how U-Boot makes use of devicetree   Simon Glass
  • [PATCH v3 1/3] doc: Tidy up the bindings for the config/ node   Simon Glass
    • [PATCH v3 1/3] doc: Tidy up the bindings for the config/ node   Heinrich Schuchardt
  • [PATCH v3 2/3] doc: Complete the list of available runtime-config options   Simon Glass
  • [PATCH v3 3/3] RFC: doc: Add documentation about devicetree usage   Simon Glass
    • [PATCH v3 3/3] RFC: doc: Add documentation about devicetree usage   Heinrich Schuchardt
      • [PATCH v3 3/3] RFC: doc: Add documentation about devicetree usage   Tom Rini
      • [PATCH v3 3/3] RFC: doc: Add documentation about devicetree usage   Heinrich Schuchardt
      • [PATCH v3 3/3] RFC: doc: Add documentation about devicetree usage   Tom Rini
      • [PATCH v3 3/3] RFC: doc: Add documentation about devicetree usage   Heinrich Schuchardt
      • [PATCH v3 3/3] RFC: doc: Add documentation about devicetree usage   Tom Rini
      • [PATCH v3 3/3] RFC: doc: Add documentation about devicetree usage   Heinrich Schuchardt
      • [PATCH v3 3/3] RFC: doc: Add documentation about devicetree usage   Tom Rini
      • [PATCH v3 3/3] RFC: doc: Add documentation about devicetree usage   Mark Kettenis
      • [PATCH v3 3/3] RFC: doc: Add documentation about devicetree usage   Tom Rini
      • [PATCH v3 3/3] RFC: doc: Add documentation about devicetree usage   Mark Kettenis
      • [PATCH v3 3/3] RFC: doc: Add documentation about devicetree usage   Tom Rini
      • [PATCH v3 3/3] RFC: doc: Add documentation about devicetree usage   Simon Glass
      • [PATCH v3 3/3] RFC: doc: Add documentation about devicetree usage   Tom Rini
    • [PATCH v3 3/3] RFC: doc: Add documentation about devicetree usage   François Ozog
      • [PATCH v3 3/3] RFC: doc: Add documentation about devicetree usage   Heinrich Schuchardt
      • [PATCH v3 3/3] RFC: doc: Add documentation about devicetree usage   François Ozog
• Problem with U-boot | Configuration Signature not being checked while booting   Moiz Imtiaz
  • Problem with U-boot | Configuration Signature not being checked while booting   Simon Glass
    • Problem with U-boot | Configuration Signature not being checked while booting   Moiz Imtiaz
      • Problem with U-boot | Configuration Signature not being checked while booting   Mark Kettenis
      • Problem with U-boot | Configuration Signature not being checked while booting   Tom Rini
      • Problem with U-boot | Configuration Signature not being checked while booting   Mark Kettenis
      • Problem with U-boot | Configuration Signature not being checked while booting   Tom Rini
      • Problem with U-boot | Configuration Signature not being checked while booting   Moiz Imtiaz
      • Problem with U-boot | Configuration Signature not being checked while booting   Tom Rini
      • Problem with U-boot | Configuration Signature not being checked while booting   Moiz Imtiaz
      • Problem with U-boot | Configuration Signature not being checked while booting   Tom Rini
      • Problem with U-boot | Configuration Signature not being checked while booting   Simon Glass
      • Problem with U-boot | Configuration Signature not being checked while booting   François Ozog
      • Problem with U-boot | Configuration Signature not being checked while booting   Simon Glass
      • Problem with U-boot | Configuration Signature not being checked while booting   François Ozog
      • Problem with U-boot | Configuration Signature not being checked while booting   Tom Rini
      • Problem with U-boot | Configuration Signature not being checked while booting   Mark Kettenis
      • Problem with U-boot | Configuration Signature not being checked while booting   Tom Rini
      • Problem with U-boot | Configuration Signature not being checked while booting   François Ozog
      • Problem with U-boot | Configuration Signature not being checked while booting   Simon Glass
      • Problem with U-boot | Configuration Signature not being checked while booting   Tom Rini
      • Problem with U-boot | Configuration Signature not being checked while booting   Simon Glass
      • Problem with U-boot | Configuration Signature not being checked while booting   Tom Rini
      • Problem with U-boot | Configuration Signature not being checked while booting   Simon Glass
      • Problem with U-boot | Configuration Signature not being checked while booting   Tom Rini
      • Problem with U-boot | Configuration Signature not being checked while booting   Simon Glass
      • Problem with U-boot | Configuration Signature not being checked while booting   Moiz Imtiaz
      • Problem with U-boot | Configuration Signature not being checked while booting   Mark Kettenis
      • Problem with U-boot | Configuration Signature not being checked while booting   François Ozog
      • Problem with U-boot | Configuration Signature not being checked while booting   Moiz Imtiaz
      • Problem with U-boot | Configuration Signature not being checked while booting   Moiz Imtiaz
      • Problem with U-boot | Configuration Signature not being checked while booting   Tom Rini
      • Problem with U-boot | Configuration Signature not being checked while booting   Mark Kettenis
      • Problem with U-boot | Configuration Signature not being checked while booting   Simon Glass
      • Problem with U-boot | Configuration Signature not being checked while booting   Tom Rini
      • Problem with U-boot | Configuration Signature not being checked while booting   Tom Rini
• [PATCH v3 0/2] Add support of an FXL6408 GPIO expander   Oleksandr Suvorov
  • [PATCH v3 1/2] GPIO: fxl6408: Add support for FXL6408 GPIO expander   Oleksandr Suvorov
    • [PATCH v3 2/2] colibri-imx8x: add on-module gpio expander fxl6408   Oleksandr Suvorov
    • [PATCH v3 1/2] GPIO: fxl6408: Add support for FXL6408 GPIO expander   Heiko Schocher
    • [PATCH v3 1/2] GPIO: fxl6408: Add support for FXL6408 GPIO expander   Michal Simek
      • [PATCH v3 1/2] GPIO: fxl6408: Add support for FXL6408 GPIO expander   Francesco Dolcini
      • [PATCH v3 1/2] GPIO: fxl6408: Add support for FXL6408 GPIO expander   Oleksandr Suvorov
      • [PATCH v3 1/2] GPIO: fxl6408: Add support for FXL6408 GPIO expander   Michal Simek
      • [PATCH v3 1/2] GPIO: fxl6408: Add support for FXL6408 GPIO expander   Oleksandr Suvorov
• riscv + sbi_serial + mtd-ram   Marcelo Politzer
• Way to change $scan_dev_for_boot search sequence?   Qu Wenruo
• [PATCH 1/1] Revert "arm64: Layerscape: Survive LPI one-way reset workaround"   Z.Q. Hou
  • [PATCH 1/1] Revert "arm64: Layerscape: Survive LPI one-way reset workaround"   Priyanka Jain (OSS)
    • [PATCH 1/1] Revert "arm64: Layerscape: Survive LPI one-way reset workaround"   Rayagonda Kokatanur
    • [PATCH 1/1] Revert "arm64: Layerscape: Survive LPI one-way reset workaround"   Tom Rini
• arm: mvebu: dts: Armada8k enable mdio   Stefan Roese
  • arm: mvebu: dts: Armada8k enable mdio   François Ozog
• [PATCHv2] pci: layerscape: Fix the LUT and msi-map mismatch issue   Zhiqiang Hou
• [PATCH v1 1/1] x86: tangier: acpi: Add GPIO card detection to SDHCI #2   Andy Shevchenko
  • [PATCH v1 1/1] x86: tangier: acpi: Add GPIO card detection to SDHCI #2   Bin Meng
    • [PATCH v1 1/1] x86: tangier: acpi: Add GPIO card detection to SDHCI #2   Andy Shevchenko
      • [PATCH v1 1/1] x86: tangier: acpi: Add GPIO card detection to SDHCI #2   Bin Meng
      • [PATCH v1 1/1] x86: tangier: acpi: Add GPIO card detection to SDHCI #2   Andy Shevchenko
• [PATCH v1 1/1] x86: edison: Mark eMMC non-removable   Andy Shevchenko
  • [PATCH v1 1/1] x86: edison: Mark eMMC non-removable   Bin Meng
    • [PATCH v1 1/1] x86: edison: Mark eMMC non-removable   Bin Meng
• [PATCH v2] arm: mediatek: merge board Kconfigs into mach-mediatek   Guillaume La Roque
  • [PATCH v2] arm: mediatek: merge board Kconfigs into mach-mediatek   Tom Rini
• [PATCH] mmc: fsl_esdhc: remove 1ms sleep in esdhc_send_cmd_common()   Michael Walle
  • [PATCH] mmc: fsl_esdhc: remove 1ms sleep in esdhc_send_cmd_common()   Jaehoon Chung
• [PATCH] pci: Fix configuring io/memory base and limit registers of PCI bridges   Pali Rohár
  • [PATCH] pci: Fix configuring io/memory base and limit registers of PCI bridges   Stefan Roese
  • [PATCH] pci: Fix configuring io/memory base and limit registers of PCI bridges   Tom Rini
• [PATCH v5 0/4] riscv: enable SBI system reset   Heinrich Schuchardt
  • [PATCH v5 1/4] riscv: add missing SBI extension definitions   Heinrich Schuchardt
  • [PATCH v5 2/4] cmd/sbi: use constants instead of numerical values   Heinrich Schuchardt
  • [PATCH v5 3/4] sysreset: provide SBI based sysreset driver   Heinrich Schuchardt
    • [PATCH v5 3/4] sysreset: provide SBI based sysreset driver   Bin Meng
    • [PATCH v5 3/4] sysreset: provide SBI based sysreset driver   Sean Anderson
  • [PATCH v5 4/4] configs: enable SYSRESET_SBI on qemu-riscvXX_smode_defconfig   Heinrich Schuchardt
    • [PATCH v5 4/4] configs: enable SYSRESET_SBI on qemu-riscvXX_smode_defconfig   Bin Meng
• [RESEND][PATCH v2 0/5] cmd: bind: Fix driver binding   Patrice Chotard
  • [RESEND][PATCH v2 4/5] configs: sandbox: add USB_ETHER and GADGET_DOWNLOAD gadget support   Patrice Chotard
• [RESEND][PATCH v2 1/5] cmd: bind: Fix driver binding on a device   Patrice Chotard
• [RESEND][PATCH v2 2/5] usb: gadget: Add bcdDevice for the DWC2 USB Gadget Controller   Patrice Chotard
• [RESEND][PATCH v2 3/5] usb: sandbox: Add gadget callbacks   Patrice Chotard
• [RESEND][PATCH v2 5/5] test/py: Add usb gadget binding test   Patrice Chotard
• [PATCH v2 1/2] arm: dts: imx8mq: Add Kontron pitx-imx8m   Heiko Thiery
  • [PATCH v2 2/2] board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support   Heiko Thiery
• [PATCH v2 1/1] x86: tangier: acpi: Add GPIO card detection to SDHCI #2   Andy Shevchenko
  • [PATCH v2 1/1] x86: tangier: acpi: Add GPIO card detection to SDHCI #2   Andy Shevchenko
    • [PATCH v2 1/1] x86: tangier: acpi: Add GPIO card detection to SDHCI #2   Bin Meng
• [PATCH] imx8mn_beacon: Fix booting hang and switch to binman   Adam Ford
  • [PATCH] imx8mn_beacon: Fix booting hang and switch to binman   Peng Fan (OSS)
    • [PATCH] imx8mn_beacon: Fix booting hang and switch to binman   Adam Ford
      • [PATCH] imx8mn_beacon: Fix booting hang and switch to binman   Adam Ford
• [PATCH 1/2] xyz-modem: Wait infinitely for initial y-modem packet   Pali Rohár
  • [PATCH 2/2] xyz-modem: Wait infinitely for initial x-modem packet   Pali Rohár
    • [PATCH 2/2] xyz-modem: Wait infinitely for initial x-modem packet   Wolfgang Denk
  • [PATCH 1/2] xyz-modem: Wait infinitely for initial y-modem packet   Wolfgang Denk
    • [PATCH 1/2] xyz-modem: Wait infinitely for initial y-modem packet   Pali Rohár
      • [PATCH 1/2] xyz-modem: Wait infinitely for initial y-modem packet   Wolfgang Denk
      • [PATCH 1/2] xyz-modem: Wait infinitely for initial y-modem packet   Pali Rohár
      • [PATCH 1/2] xyz-modem: Wait infinitely for initial y-modem packet   Wolfgang Denk
      • [PATCH 1/2] xyz-modem: Wait infinitely for initial y-modem packet   Tom Rini
• [PATCH 01/12] lmb: Always compile arch_lmb_reserve() into U-Boot on arm   Marek Vasut
  • [PATCH 02/12] lmb: Always compile arch_lmb_reserve() into U-Boot on arc   Marek Vasut
    • [PATCH 02/12] lmb: Always compile arch_lmb_reserve() into U-Boot on arc   Tom Rini
  • [PATCH 03/12] lmb: Add generic arch_lmb_reserve_generic()   Marek Vasut
    • [PATCH 03/12] lmb: Add generic arch_lmb_reserve_generic()   Tom Rini
    • [PATCH 03/12] lmb: Add generic arch_lmb_reserve_generic()   Daniel Schwierzeck
      • [PATCH 03/12] lmb: Add generic arch_lmb_reserve_generic()   Marek Vasut
    • [PATCH 03/12] lmb: Add generic arch_lmb_reserve_generic()   Tom Rini
  • [PATCH 04/12] lmb: Switch to generic arch_lmb_reserve_generic()   Marek Vasut
    • [PATCH 04/12] lmb: Switch to generic arch_lmb_reserve_generic()   Tom Rini
  • [PATCH 05/12] lmb: arm: Increase LMB alignment to 16k in arch_lmb_reserve_generic()   Marek Vasut
    • [PATCH 05/12] lmb: arm: Increase LMB alignment to 16k in arch_lmb_reserve_generic()   Tom Rini
    • [PATCH 05/12] lmb: arm: Increase LMB alignment to 16k in arch_lmb_reserve_generic()   Tom Rini
  • [PATCH 06/12] lmb: Remove imx board_lmb_reserve()   Marek Vasut
    • [PATCH 06/12] lmb: Remove imx board_lmb_reserve()   Tom Rini
  • [PATCH 07/12] lmb: nios2: Add arch_lmb_reserve()   Marek Vasut
    • [PATCH 07/12] lmb: nios2: Add arch_lmb_reserve()   Tom Rini
  • [PATCH 08/12] lmb: nds32: Add arch_lmb_reserve()   Marek Vasut
    • [PATCH 08/12] lmb: nds32: Add arch_lmb_reserve()   Tom Rini
  • [PATCH 09/12] lmb: riscv: Add arch_lmb_reserve()   Marek Vasut
    • [PATCH 09/12] lmb: riscv: Add arch_lmb_reserve()   Tom Rini
  • [PATCH 10/12] lmb: sh: Add arch_lmb_reserve()   Marek Vasut
    • [PATCH 10/12] lmb: sh: Add arch_lmb_reserve()   Tom Rini
  • [PATCH 11/12] lmb: xtensa: Add arch_lmb_reserve()   Marek Vasut
    • [PATCH 11/12] lmb: xtensa: Add arch_lmb_reserve()   Tom Rini
  • [PATCH 12/12] lmb: x86: Add arch_lmb_reserve()   Marek Vasut
    • [PATCH 12/12] lmb: x86: Add arch_lmb_reserve()   Tom Rini
  • [PATCH 01/12] lmb: Always compile arch_lmb_reserve() into U-Boot on arm   Tom Rini
• [PATCH] arm: ti: k3: Resync dts files and bindings with Linux Kernel v5.14   Tom Rini
• [PATCH v7 5/5] iot2050: Enable watchdog support, but do not auto-start it   Tom Rini
  • [PATCH v7 5/5] iot2050: Enable watchdog support, but do not auto-start it   Jan Kiszka
    • [PATCH v7 5/5] iot2050: Enable watchdog support, but do not auto-start it   Tom Rini
      • [PATCH v7 5/5] iot2050: Enable watchdog support, but do not auto-start it   Jan Kiszka
      • [PATCH v7 5/5] iot2050: Enable watchdog support, but do not auto-start it   Tom Rini
      • [PATCH v7 5/5] iot2050: Enable watchdog support, but do not auto-start it   Jan Kiszka
      • [PATCH v7 5/5] iot2050: Enable watchdog support, but do not auto-start it   Tom Rini
      • [PATCH v7 5/5] iot2050: Enable watchdog support, but do not auto-start it   François Ozog
      • [PATCH v7 5/5] iot2050: Enable watchdog support, but do not auto-start it   Tom Rini
      • [PATCH v7 5/5] iot2050: Enable watchdog support, but do not auto-start it   Jan Kiszka
• [PATCH 0/4] efi_loader: centralize known vendor GUIDs   Heinrich Schuchardt
  • [PATCH 1/4] efi_loader: treat UEFI variable name as const   Heinrich Schuchardt
    • [PATCH 1/4] efi_loader: treat UEFI variable name as const   Ilias Apalodimas
      • [PATCH 1/4] efi_loader: treat UEFI variable name as const   Heinrich Schuchardt
  • [PATCH 2/4] efi_loader: function to get GUID for variable name   Heinrich Schuchardt
    • [PATCH 2/4] efi_loader: function to get GUID for variable name   Ilias Apalodimas
      • [PATCH 2/4] efi_loader: function to get GUID for variable name   Ilias Apalodimas
  • [PATCH 3/4] efi_loader: simplify efi_sigstore_parse_sigdb()   Heinrich Schuchardt
    • [PATCH 3/4] efi_loader: simplify efi_sigstore_parse_sigdb()   Ilias Apalodimas
      • [PATCH 3/4] efi_loader: simplify efi_sigstore_parse_sigdb()   Heinrich Schuchardt
      • [PATCH 3/4] efi_loader: simplify efi_sigstore_parse_sigdb()   Ilias Apalodimas
  • [PATCH 4/4] efi_loader: simplify tcg2_measure_secure_boot_variable()   Heinrich Schuchardt
• [PATCH] arm: am335x: Enable SPL_OF_CONTROL on some configs   Tom Rini
• [PATCH] ARM: omap3: evm: Enable booting 'fitImage' with DEFAULT_FIT_TI_ARGS   Tom Rini
• [PATCH 1/3] board: ti: am64x: Add support for fixing dr_mode while booting from USB   Tom Rini
• [PATCH 2/3] environment: ti: mmc.h: Make the finduuid generic for usage across different device types   Tom Rini
• [PATCH 3/3] include: configs: am64x_evm: Add env variables for booting to kernel using USB MSC device   Tom Rini
• [PATCH] am33xx: Fix USB for am335x boards   Tom Rini
• [PATCH] arm: dts: k3-am642-evm-u-boot: Add u-boot, dm-spl tag in the pinmux node of mmc1   Tom Rini
• [PATCH] tools: k3_fit_atf: Fix DM binary FIT load addresses   Tom Rini
• [PATCH v2] ARM: dts: Fix node status to "okay" on TI boards   Tom Rini
• [PATCH v2 1/3] arm: dts: k3-j721e-r5-*.dts: Fix clock-names property in the usb0 instance   Tom Rini
• [PATCH v2 2/3] environment: ti: k3_dfu: Increase the size allocated for bootloader images in dfu_alt_info_ram   Tom Rini
• [PATCH v2 3/3] configs: j72*_evm: Define the buffer sizes for dfu   Tom Rini
• [PATCH 1/3] doc: ti: Convert am335x_evm README to rST   Tom Rini
  • [PATCH 1/3] doc: ti: Convert am335x_evm README to rST   Tom Rini
• [PATCH 2/3] doc: ti: am335x_evm: Minor general updates   Tom Rini
  • [PATCH 2/3] doc: ti: am335x_evm: Minor general updates   Tom Rini
• [PATCH 3/3] am335x: Enable SPL_OF_CONTROL   Tom Rini
• [PATCH] board: sifive: overwrite board_fdt_blob_setup in u-boot proper   Bin Meng
  • [PATCH] board: sifive: overwrite board_fdt_blob_setup in u-boot proper   Bin Meng
• [PATCH v2] board: sifive: Fix a potential build warning in board_fdt_blob_setup()   Bin Meng
  • [PATCH v2] board: sifive: Fix a potential build warning in board_fdt_blob_setup()   Leo Liang
  • [PATCH v2] board: sifive: Fix a potential build warning in board_fdt_blob_setup()   Rick Chen
  • [PATCH v2] board: sifive: Fix a potential build warning in board_fdt_blob_setup()   Ilias Apalodimas
    • [PATCH v2] board: sifive: Fix a potential build warning in board_fdt_blob_setup()   Bin Meng
      • [PATCH v2] board: sifive: Fix a potential build warning in board_fdt_blob_setup()   Ilias Apalodimas
• [PATCH v2 1/4] tools: docker: Bump up QEMU version to 6.1.0   Bin Meng
  • [PATCH v2 1/4] tools: docker: Bump up QEMU version to 6.1.0   Tom Rini
  • [PATCH v2 1/4] tools: docker: Bump up QEMU version to 6.1.0   Tom Rini
• [PATCH] Dockerfile: Update to latest "focal" tag   Tom Rini
  • [PATCH] Dockerfile: Update to latest "focal" tag   Bin Meng
  • [PATCH] Dockerfile: Update to latest "focal" tag   Tom Rini
• [PATCH] CI: Update to latest container images   Tom Rini
  • [PATCH] CI: Update to latest container images   Bin Meng
  • [PATCH] CI: Update to latest container images   Tom Rini
• Watchdog auto-start and TIMER_EARLY broken in RISC-V U-Boot   Samuel Holland
  • Watchdog auto-start and TIMER_EARLY broken in RISC-V U-Boot   Sean Anderson
    • Watchdog auto-start and TIMER_EARLY broken in RISC-V U-Boot   Samuel Holland
      • Watchdog auto-start and TIMER_EARLY broken in RISC-V U-Boot   Sean Anderson
• [PATCH v2 1/4] clk: k210: Fix checking if ulongs are less than 0   Sean Anderson
  • [PATCH v2 2/4] k210: clk: Refactor out_of_spec tests   Sean Anderson
    • [PATCH v2 2/4] k210: clk: Refactor out_of_spec tests   Leo Liang
  • [PATCH v2 3/4] test: dm: k210: Reduce duplication in test cases   Sean Anderson
    • [PATCH v2 3/4] test: dm: k210: Reduce duplication in test cases   Leo Liang
  • [PATCH v2 4/4] clk: k210: Try harder to get the best config   Sean Anderson
    • [PATCH v2 4/4] clk: k210: Try harder to get the best config   Simon Glass
  • [PATCH v2 1/4] clk: k210: Fix checking if ulongs are less than 0   Leo Liang
• [PATCH] sunxi: call fdt_fixup_ethernet again to set macaddr for more aliases   Jernej Skrabec
• [PATCH v2 2/4] tools: docker: Build and install genimage   Tom Rini
• [PATCH v2 3/4] riscv: sifive: unleashed: Add genimage config files   Tom Rini
• [PATCH v2 4/4] azure/gitlab: Add tests for SiFive Unleashed board   Tom Rini
• [PATCH v3 1/1] x86: tangier: acpi: Add GPIO card detection to SDHCI #2   Andy Shevchenko
  • [PATCH v3 1/1] x86: tangier: acpi: Add GPIO card detection to SDHCI #2   Bin Meng
• [PATCH] wdt: dw: Fix passing NULL pointer to reset functions   Sean Anderson
  • [PATCH] wdt: dw: Fix passing NULL pointer to reset functions   Sean Anderson
    • [PATCH] wdt: dw: Fix passing NULL pointer to reset functions   Stefan Roese
  • [PATCH] wdt: dw: Fix passing NULL pointer to reset functions   Stefan Roese
  • [PATCH] wdt: dw: Fix passing NULL pointer to reset functions   Stefan Roese
• [PATCH] clk: sunxi: Extend DM_RESET selection to SPL   Samuel Holland
• [PATCH] cmd: mmc: Support mmc hwpartition user enh start -   Marek Vasut
  • [PATCH] cmd: mmc: Support mmc hwpartition user enh start -   Peng Fan (OSS)
    • [PATCH] cmd: mmc: Support mmc hwpartition user enh start -   Marek Vasut
• [PATCH 0/3] sunxi: Cleanup to prepare for DM_GPIO/DM_PINCTRL   Samuel Holland
  • [PATCH 1/3] sunxi: Clean up inclusions of asm/arch/gpio.h   Samuel Holland
    • [PATCH 1/3] sunxi: Clean up inclusions of asm/arch/gpio.h   Andre Przywara
  • [PATCH 2/3] sunxi: gpio: Remove name_to_gpio macro   Samuel Holland
    • [PATCH 2/3] sunxi: gpio: Remove name_to_gpio macro   Andre Przywara
  • [PATCH 3/3] sunxi: gpio: Remove bank-specific size macros   Samuel Holland
    • [PATCH 3/3] sunxi: gpio: Remove bank-specific size macros   Andre Przywara
• [PATCH 0/3] gpio: uclass enhancements for DM_GPIO drivers   Samuel Holland
  • [PATCH 1/3] gpio: Verify validity of pin offsets when looking up names   Samuel Holland
    • [PATCH 1/3] gpio: Verify validity of pin offsets when looking up names   Simon Glass
  • [PATCH 2/3] gpio: Verify validity of pin offsets from device trees   Samuel Holland
    • [PATCH 2/3] gpio: Verify validity of pin offsets from device trees   Simon Glass
  • [PATCH 3/3] gpio: Factor out DT flag translation   Samuel Holland
    • [PATCH 3/3] gpio: Factor out DT flag translation   Simon Glass
• [PATCH 1/3] ARM: imx: mx5: Enable BMODE command on MX53 Menlo board   Marek Vasut
  • [PATCH 2/3] ARM: imx: mx5: Enable Thumb2 build on MX53 Menlo board   Marek Vasut
  • [PATCH 3/3] ARM: imx: mx5: Add altbootcmd and resets to M53Menlo   Marek Vasut
• [PATCH] ARM: dts: imx8mm-verdin: Set PHY mode to RGMII-ID   Marek Vasut
  • [PATCH] ARM: dts: imx8mm-verdin: Set PHY mode to RGMII-ID   Marcel Ziswiler
    • [PATCH] ARM: dts: imx8mm-verdin: Set PHY mode to RGMII-ID   Marek Vasut
• [PATCH 1/9] cache: sifive: Fix -Wint-to-pointer-cast warning   Bin Meng
  • [PATCH 2/9] clk: sifive: Fix -Wint-to-pointer-cast warning   Bin Meng
    • [PATCH 2/9] clk: sifive: Fix -Wint-to-pointer-cast warning   Leo Liang
  • [PATCH 3/9] gpio: sifive: Fix -Wint-to-pointer-cast warning   Bin Meng
    • [PATCH 3/9] gpio: sifive: Fix -Wint-to-pointer-cast warning   Leo Liang
  • [PATCH 4/9] i2c: ocores: Fix -Wint-to-pointer-cast warning   Bin Meng
    • [PATCH 4/9] i2c: ocores: Fix -Wint-to-pointer-cast warning   Leo Liang
  • [PATCH 5/9] dm: core: Add a new API devfdt_get_addr_index_ptr()   Bin Meng
    • [PATCH 5/9] dm: core: Add a new API devfdt_get_addr_index_ptr()   Leo Liang
    • [PATCH 5/9] dm: core: Add a new API devfdt_get_addr_index_ptr()   Simon Glass
  • [PATCH 6/9] dm: Provide dev_read_addr_index_ptr() wrapper   Bin Meng
    • [PATCH 6/9] dm: Provide dev_read_addr_index_ptr() wrapper   Leo Liang
    • [PATCH 6/9] dm: Provide dev_read_addr_index_ptr() wrapper   Simon Glass
  • [PATCH 7/9] net: macb: Fix -Wint-to-pointer-cast warnings   Bin Meng
    • [PATCH 7/9] net: macb: Fix -Wint-to-pointer-cast warnings   Ramon Fried
  • [PATCH 8/9] ram: sifive: Fix -Wint-to-pointer-cast warnings   Bin Meng
    • [PATCH 8/9] ram: sifive: Fix -Wint-to-pointer-cast warnings   Leo Liang
  • [PATCH 9/9] board: sifive: Fix -Wint-to-pointer-cast warning   Bin Meng
    • [PATCH 9/9] board: sifive: Fix -Wint-to-pointer-cast warning   Leo Liang
  • [PATCH 1/9] cache: sifive: Fix -Wint-to-pointer-cast warning   Leo Liang
• [PATCH] cmd: tlv_eeprom   sven.auhagen at voleatech.de
• [PATCH 0/3] phy: sun4i-usb: Support VBUS detection via power supply   Samuel Holland
  • [PATCH 1/3] phy: sun4i-usb: Remove a couple of debug messages   Samuel Holland
  • [PATCH 2/3] phy: sun4i-usb: Refactor VBUS detection to match Linux   Samuel Holland
  • [PATCH 3/3] phy: sun4i-usb: Support VBUS detection via power supply   Samuel Holland
• [PATCH v2 0/3] Support SPL for i.MX7ULP   Oleksandr Suvorov
• [PATCH v2 1/3] mx7ulp: select soc features   Oleksandr Suvorov
  • [PATCH v2 2/3] mx7ulp: add base SPL support for mx7ulp   Oleksandr Suvorov
  • [PATCH v2 3/3] mx7ulp_com: add support for SPL   Oleksandr Suvorov
    • [PATCH v2 3/3] mx7ulp_com: add support for SPL   Fabio Estevam
      • [PATCH v2 3/3] mx7ulp_com: add support for SPL   Igor Opaniuk
      • [PATCH v2 3/3] mx7ulp_com: add support for SPL   Fabio Estevam
      • [PATCH v2 3/3] mx7ulp_com: add support for SPL   Oleksandr Suvorov
      • [PATCH v2 3/3] mx7ulp_com: add support for SPL   Fabio Estevam
      • [PATCH v2 3/3] mx7ulp_com: add support for SPL   Oleksandr Suvorov
  • [PATCH v2 1/3] mx7ulp: select soc features   Igor Opaniuk
• [PATCH 1/2] clk: sunxi: Add support for I2C gates/resets   Samuel Holland
  • [PATCH 2/2] clk: sunxi: Add drivers for A31 and H6 PRCM CCUs   Samuel Holland
• [PATCH] i2c: mvtwsi: Add support for DM clocks and resets   Samuel Holland
  • [PATCH] i2c: mvtwsi: Add support for DM clocks and resets   Heiko Schocher
    • [PATCH] i2c: mvtwsi: Add support for DM clocks and resets   Heiko Schocher
• [PATCH 1/2] sunxi: Simplify MMC pinmux selection   Samuel Holland
  • [PATCH 1/2] sunxi: Simplify MMC pinmux selection   Andre Przywara
    • [PATCH 1/2] sunxi: Simplify MMC pinmux selection   Samuel Holland
• [PATCH 2/2] gpio: sunxi: Remove the sunxi_name_to_gpio_bank function   Samuel Holland
  • [PATCH 2/2] gpio: sunxi: Remove the sunxi_name_to_gpio_bank function   Simon Glass
• [PATCH] serial: Add a debug console using the RISC-V SBI interface   Samuel Holland
  • [PATCH] serial: Add a debug console using the RISC-V SBI interface   Sean Anderson
  • [PATCH] serial: Add a debug console using the RISC-V SBI interface   Bin Meng
• [PATCH] riscv: Fix setting no-map in reserved memory nodes   Samuel Holland
  • [PATCH] riscv: Fix setting no-map in reserved memory nodes   Bin Meng
  • [PATCH] riscv: Fix setting no-map in reserved memory nodes   Rick Chen
  • [PATCH] riscv: Fix setting no-map in reserved memory nodes   Atish Patra
• [PATCH] riscv: image: Use the first DRAM bank for bootm_low   Samuel Holland
  • [PATCH] riscv: image: Use the first DRAM bank for bootm_low   Leo Liang
• [PATCH] clk: sunxi: Move header out of arch directory   Samuel Holland
  • [PATCH] clk: sunxi: Move header out of arch directory   Bin Meng
• [PATCH v6 0/4] riscv: enable SBI system reset   Heinrich Schuchardt
• [PATCH v6 1/4] riscv: add missing SBI extension definitions   Heinrich Schuchardt
• [PATCH v6 2/4] cmd/sbi: use constants instead of numerical values   Heinrich Schuchardt
• [PATCH v6 3/4] sysreset: provide SBI based sysreset driver   Heinrich Schuchardt
  • [PATCH v6 3/4] sysreset: provide SBI based sysreset driver   Samuel Holland
• [PATCH v6 4/4] configs: enable SYSRESET_SBI on qemu-riscvXX_smode_defconfig   Heinrich Schuchardt
  • [PATCH v6 4/4] configs: enable SYSRESET_SBI on qemu-riscvXX_smode_defconfig   Leo Liang
• Pull request for efi-2021-10-rc4-2   Heinrich Schuchardt
  • Pull request for efi-2021-10-rc4-2   Tom Rini
• [PATCH] apalis/colibri_imx6: move setting bootcmd to defconfig   Oleksandr Suvorov
  • [PATCH] apalis/colibri_imx6: move setting bootcmd to defconfig   Peng Fan (OSS)
  • [PATCH] apalis/colibri_imx6: move setting bootcmd to defconfig   Igor Opaniuk
  • [PATCH] apalis/colibri_imx6: move setting bootcmd to defconfig   Marcel Ziswiler
    • [PATCH] apalis/colibri_imx6: move setting bootcmd to defconfig   Oleksandr Suvorov
• [PATCH] acpi: Use U-Boot version for OEM_REVISION   Pali Rohár
  • [PATCH] acpi: Use U-Boot version for OEM_REVISION   Simon Glass
    • [PATCH] acpi: Use U-Boot version for OEM_REVISION   Tom Rini
• [PATCH 01/17] am335x_guardian: Enable SPL_OF_CONTROL   Tom Rini
  • [PATCH 02/17] am335x_boneblack_vboot: Enable SPL_OF_CONTROL   Tom Rini
  • [PATCH 03/17] am335x: Remove legacy non-DM_USB code   Tom Rini
  • [PATCH 04/17] keystone2: Move CONFIG_AEMIF_CNTRL_BASE out of CONFIG namespace   Tom Rini
    • [PATCH 04/17] keystone2: Move CONFIG_AEMIF_CNTRL_BASE out of CONFIG namespace   Tom Rini
  • [PATCH 05/17] usb: phy: ti: Remove non-DM PHY code   Tom Rini
    • [PATCH 05/17] usb: phy: ti: Remove non-DM PHY code   Tom Rini
  • [PATCH 06/17] Convert CONFIG_USB_XHCI_OMAP to Kconfig   Tom Rini
    • [PATCH 06/17] Convert CONFIG_USB_XHCI_OMAP to Kconfig   Tom Rini
  • [PATCH 07/17] compulab: Clean up some unused symbols   Tom Rini
    • [PATCH 07/17] compulab: Clean up some unused symbols   Tom Rini
  • [PATCH 08/17] ti: keystone: Clean up or migrate some NAND related options.   Tom Rini
    • [PATCH 08/17] ti: keystone: Clean up or migrate some NAND related options.   Tom Rini
  • [PATCH 09/17] ti: keystone: dma: Migrate to Kconfig   Tom Rini
    • [PATCH 09/17] ti: keystone: dma: Migrate to Kconfig   Tom Rini
  • [PATCH 10/17] omapl138_lcdk: Stop using CONFIG_MACH_OMAPL138_LCDK   Tom Rini
    • [PATCH 10/17] omapl138_lcdk: Stop using CONFIG_MACH_OMAPL138_LCDK   Tom Rini
  • [PATCH 11/17] usb: ehci-omap: Drop non-DM_USB legacy code   Tom Rini
    • [PATCH 11/17] usb: ehci-omap: Drop non-DM_USB legacy code   Tom Rini
  • [PATCH 12/17] Convert CONFIG_OMAP_EHCI_PHY1_RESET_GPIO et al to Kconfig   Tom Rini
    • [PATCH 12/17] Convert CONFIG_OMAP_EHCI_PHY1_RESET_GPIO et al to Kconfig   Tom Rini
  • [PATCH 13/17] am3517_evm: Remove unused comments/code   Tom Rini
    • [PATCH 13/17] am3517_evm: Remove unused comments/code   Tom Rini
  • [PATCH 14/17] omap3_logic: Remove unused comments/code   Tom Rini
    • [PATCH 14/17] omap3_logic: Remove unused comments/code   Tom Rini
  • [PATCH 15/17] omap4_panda: Remove unused comments/code   Tom Rini
    • [PATCH 15/17] omap4_panda: Remove unused comments/code   Tom Rini
  • [PATCH 16/17] ti: keystone: Move away from CONFIG_SOC_KEYSTONE   Tom Rini
    • [PATCH 16/17] ti: keystone: Move away from CONFIG_SOC_KEYSTONE   Tom Rini
  • [PATCH 17/17] ti: keystone: Migrate CONFIG_SOC_K2* to Kconfig   Tom Rini
    • [PATCH 17/17] ti: keystone: Migrate CONFIG_SOC_K2* to Kconfig   Tom Rini
• [PATCH v3 0/4] Add octal DTR support for Macronix flash   JaimeLiao
  • [PATCH v3 1/4] mtd: spi-nor: macronix: add support for Macronix Octal   JaimeLiao
  • [PATCH v3 2/4] mtd: spi-nor-core: Adding different type of command extension in Soft Reset   JaimeLiao
    • [PATCH v3 2/4] mtd: spi-nor-core: Adding different type of command extension in Soft Reset   Pratyush Yadav
  • [PATCH v3 3/4] mtd: spi-nor-core: set 4byte opcode when possible   JaimeLiao
    • [PATCH v3 3/4] mtd: spi-nor-core: set 4byte opcode when possible   Pratyush Yadav
      • [PATCH v3 3/4] mtd: spi-nor-core: set 4byte opcode when possible   liao jaime
  • [PATCH v3 4/4] mtd: spi-nor-core: Add support for Macronix Octal flash   JaimeLiao
• [PATCH v7] arm: add initial support for the Phytium Pomelo Board   nicholas_zheng at outlook.com
• [PULL] Please pull mmc-2021-9-13   Peng Fan (OSS)
  • [PULL] Please pull mmc-2021-9-13   Tom Rini
• [PATCH] efi_driver: simplify efi_bl_bind()   AKASHI Takahiro
  • [PATCH] efi_driver: simplify efi_bl_bind()   Heinrich Schuchardt
    • [PATCH] efi_driver: simplify efi_bl_bind()   AKASHI Takahiro
  • [PATCH] efi_driver: simplify efi_bl_bind()   Simon Glass
• [PATCH v1 2/2] pinctrl: single: Add request() api   Rayagonda Kokatanur
  • [PATCH v1 2/2] pinctrl: single: Add request() api   Simon Glass
• [PATCH v1 1/2] pinctrl: single: Parse gpio details from dt   Rayagonda Kokatanur
  • [PATCH v1 1/2] pinctrl: single: Parse gpio details from dt   Simon Glass
• [PATCH v1] driver: spi: add bcm iproc qspi support.   Rayagonda Kokatanur
• [PATCH] mtd: spi: nor: force mtd name to "nor%d"   Patrick Delaunay
  • [PATCH] mtd: spi: nor: force mtd name to "nor%d"   Marek Behún
• [PATCH v2] mtd: spi: nor: force mtd name to "nor%d"   Patrick Delaunay
• Bug: qemu_arm64: Cannot access the second flash bank   Matthias Brugger
  • Bug: qemu_arm64: Cannot access the second flash bank   Peter Maydell
  • Bug: qemu_arm64: Cannot access the second flash bank   Matthias Brugger
• [PATCH] board: atmel: sama7g5ek: avoid rewriting of configured CONFIG_BOOTCOMMAND   Eugen.Hristev at microchip.com
• [PATCH] mtd: nand: raw: convert nand_dt_init() to ofnode_xx() interface   Patrice Chotard
  • [PATCH] mtd: nand: raw: convert nand_dt_init() to ofnode_xx() interface   Heiko Schocher
  • [PATCH] mtd: nand: raw: convert nand_dt_init() to ofnode_xx() interface   Tom Rini
• [PATCH v2 1/5] board: sl28: enable EFI_SET_TIME support   Michael Walle
  • [PATCH v2 5/5] board: sl28: add update image documentation   Michael Walle
• [PATCH v2 2/5] board: sl28: generate FIT update image   Michael Walle
• [PATCH v2 3/5] board: sl28: enable EFI UpdateCapsule support   Michael Walle
  • [PATCH v2 3/5] board: sl28: enable EFI UpdateCapsule support   Michael Walle
• [PATCH v2 4/5] doc: board: kontron: sl28: Reduce section levels and change title   Michael Walle
• [PATCH v2 02/32] ppc: Remove UCP1020 board   Arcturus Support
  • [PATCH v2 02/32] ppc: Remove UCP1020 board   Tom Rini
• [PATCH 1/5] kgdb: Remove unused serial related options   Tom Rini
  • [PATCH 2/5] Convert CONFIG_BAUDRATE to Kconfig   Tom Rini
  • [PATCH 3/5] serial: Use the default CONFIG_SYS_BAUDRATE_TABLE in more platforms   Tom Rini
  • [PATCH 4/5] serial: Remove extraneous SYS_MALLOC_F check   Tom Rini
  • [PATCH 5/5] serial: Rework CONFIG_SYS_BAUDRATE_TABLE   Tom Rini
    • [PATCH 5/5] serial: Rework CONFIG_SYS_BAUDRATE_TABLE   Alex G.
      • [PATCH 5/5] serial: Rework CONFIG_SYS_BAUDRATE_TABLE   Tom Rini
      • [PATCH 5/5] serial: Rework CONFIG_SYS_BAUDRATE_TABLE   Pali Rohár
      • [PATCH 5/5] serial: Rework CONFIG_SYS_BAUDRATE_TABLE   Tom Rini
      • [PATCH 5/5] serial: Rework CONFIG_SYS_BAUDRATE_TABLE   Pali Rohár
      • [PATCH 5/5] serial: Rework CONFIG_SYS_BAUDRATE_TABLE   Tom Rini
  • [PATCH 1/5] kgdb: Remove unused serial related options   Peng Fan (OSS)
    • [PATCH 1/5] kgdb: Remove unused serial related options   Tom Rini
      • [PATCH 1/5] kgdb: Remove unused serial related options   Peng Fan (OSS)
      • [PATCH 1/5] kgdb: Remove unused serial related options   Tom Rini
• Pull request: u-boot-sunxi/master for v2021.10   Andre Przywara
  • Pull request: u-boot-sunxi/master for v2021.10   Tom Rini
• [PATCH v2 03/32] pci: Drop old code from header file   Tom Rini
• [PATCH v2 05/32] pci: Drop DM_PCI check from fdtdec   Tom Rini
• [PATCH v2 12/32] pci: acpi: Drop DM_PCI check from ahci   Tom Rini
• [PATCH v2 21/32] net: Drop DM_PCI check from designware driver   Tom Rini
• [PATCH v2 30/32] pci: Drop PCI_INDIRECT_BRIDGE   Tom Rini
• [PATCH v2 31/32] pci: Drop DM_PCI   Tom Rini
• [PATCH] efi_loader: Set EFI_SIMPLE_NETWORK_RECEIVE_INTERRUPT again in efi_net_receive()   Masami Hiramatsu
  • [PATCH] efi_loader: Set EFI_SIMPLE_NETWORK_RECEIVE_INTERRUPT again in efi_net_receive()   Heinrich Schuchardt
    • [PATCH] efi_loader: Set EFI_SIMPLE_NETWORK_RECEIVE_INTERRUPT again in efi_net_receive()   Masami Hiramatsu
      • [PATCH] efi_loader: Set EFI_SIMPLE_NETWORK_RECEIVE_INTERRUPT again in efi_net_receive()   Masami Hiramatsu
• [PATCH] bootstage: Add SPL support   Marek Vasut
  • [PATCH] bootstage: Add SPL support   Simon Glass
  • [PATCH] bootstage: Add SPL support   Tom Rini
• [PATCH] ddr: altera: use KBUILD_BASENAME instead of __FILE__   Marek Vasut
  • [PATCH] ddr: altera: use KBUILD_BASENAME instead of __FILE__   Chee, Tien Fong
• [PATCH] mtd: spi-nor-ids: Reinstate Micron MT25QL02G   Marek Vasut
• [PATCH] mtd: cqspi: Fix division by zero   Marek Vasut
  • [PATCH] mtd: cqspi: Fix division by zero   Pratyush Yadav
    • [PATCH] mtd: cqspi: Fix division by zero   Marek Vasut
• [PATCH] mtd: cqspi: Wait for transfer completion   Marek Vasut
  • [PATCH] mtd: cqspi: Wait for transfer completion   Pratyush Yadav
    • [PATCH] mtd: cqspi: Wait for transfer completion   Marek Vasut
      • [PATCH] mtd: cqspi: Wait for transfer completion   Pratyush Yadav
      • [PATCH] mtd: cqspi: Wait for transfer completion   Marek Vasut
• [PATCH 1/8] arm: socfpga: vining: Drop meaningless comment   Marek Vasut
  • [PATCH 2/8] arm: socfpga: vining: Increase environment size   Marek Vasut
    • [PATCH 2/8] arm: socfpga: vining: Increase environment size   Chee, Tien Fong
  • [PATCH 3/8] arm: socfpga: vining: Set USB gadget manufacturer to Softing with capital S   Marek Vasut
    • [PATCH 3/8] arm: socfpga: vining: Set USB gadget manufacturer to Softing with capital S   Chee, Tien Fong
  • [PATCH 4/8] arm: socfpga: vining: Set default SPI NOR mode and frequency   Marek Vasut
    • [PATCH 4/8] arm: socfpga: vining: Set default SPI NOR mode and frequency   Chee, Tien Fong
  • [PATCH 5/8] arm: socfpga: vining: Un-disable WDT in DT   Marek Vasut
    • [PATCH 5/8] arm: socfpga: vining: Un-disable WDT in DT   Chee, Tien Fong
  • [PATCH 6/8] arm: socfpga: vining: Fix UDC controller phandle in DT   Marek Vasut
    • [PATCH 6/8] arm: socfpga: vining: Fix UDC controller phandle in DT   Chee, Tien Fong
  • [PATCH 7/8] arm: socfpga: vining: Enable DW I2C driver   Marek Vasut
    • [PATCH 7/8] arm: socfpga: vining: Enable DW I2C driver   Chee, Tien Fong
  • [PATCH 8/8] arm: socfpga: vining: Let DWMAC configure PHY reset GPIO   Marek Vasut
    • [PATCH 8/8] arm: socfpga: vining: Let DWMAC configure PHY reset GPIO   Chee, Tien Fong
  • [PATCH 1/8] arm: socfpga: vining: Drop meaningless comment   Chee, Tien Fong
• [PATCH] dfu: dfu_sf: Read the SPI flash in 16 MiB chunks   Marek Vasut
  • [PATCH] dfu: dfu_sf: Read the SPI flash in 16 MiB chunks   Lukasz Majewski
• [PATCH] dfu: dfu_sf: Add support for multiple flashes   Marek Vasut
  • [PATCH] dfu: dfu_sf: Add support for multiple flashes   Lukasz Majewski
• [PATCH] mtd: sf: Set SF parameters as env variables   Marek Vasut
  • [PATCH] mtd: sf: Set SF parameters as env variables   Pratyush Yadav
    • [PATCH] mtd: sf: Set SF parameters as env variables   Marek Vasut
• [PATCH] mtd: rawnand: Add Macronix raw NAND controller driver   Zhengxun Li
• [PATCH] image: fit: fix byte order for crc32 hash check   Mathew McBride
  • [PATCH] image: fit: fix byte order for crc32 hash check   Tom Rini
• [PATCH] efi_loader: Fix spec ID event creation   Ilias Apalodimas
  • [PATCH] efi_loader: Fix spec ID event creation   Ruchika Gupta
• ECC strength for device tree with imx6 processor   Torrelli, Maxime
• [PATCH] Allow colon in PXE bootfile URLs   Ramon Fried
  • [PATCH] Allow colon in PXE bootfile URLs   Ramon Fried
• [PATCH v2 1/6] net: dsa: felix: felix_init() can be static   Ramon Fried
• [PATCH v2 2/6] net: dsa: use "err" instead of "ret" in dsa_port_probe   Ramon Fried
• [PATCH v2 3/6] net: dsa: refactor the code to set the port MAC address into a dedicated function   Ramon Fried
• [PATCH v2 4/6] net: dsa: introduce a .port_probe() method in struct dsa_ops   Ramon Fried
• [PATCH v2 6/6] net: dsa: felix: propagate the error code from phy_startup()   Ramon Fried
• [PATCH] arm: dts: stm32mp1: use ssbl partition name for U-Boot   Patrick Delaunay
  • [PATCH] arm: dts: stm32mp1: use ssbl partition name for U-Boot   Patrice CHOTARD
  • [PATCH] arm: dts: stm32mp1: use ssbl partition name for U-Boot   Patrick DELAUNAY
  • [PATCH] arm: dts: stm32mp1: use ssbl partition name for U-Boot   Alex G.
• [PATCH 1/2] phy: stm32-usbphyc: use connector for vbus-supply with phy-stm32-usbphyc   Patrick Delaunay
  • [PATCH 2/2] phy: stm32-usbphyc: stm32: usbphyc: add protection on phy sub-node   Patrick Delaunay
    • [PATCH 2/2] phy: stm32-usbphyc: stm32: usbphyc: add protection on phy sub-node   Patrice CHOTARD
  • [PATCH 1/2] phy: stm32-usbphyc: use connector for vbus-supply with phy-stm32-usbphyc   Patrice CHOTARD
• [PATCHv2 1/2] arm: Remove flea3 board   Tom Rini
  • [PATCHv2 1/2] arm: Remove flea3 board   Stefano Babic
• [PATCHv2 2/2] arm: Remove aspenite board   Tom Rini
• RFC: exclude partitions from efi_selftest   Michael Lawnick
  • RFC: exclude partitions from efi_selftest   Heinrich Schuchardt
    • RFC: exclude partitions from efi_selftest   Michael Lawnick
      • RFC: exclude partitions from efi_selftest   Heinrich Schuchardt
      • RFC: exclude partitions from efi_selftest   Michael Lawnick
      • RFC: exclude partitions from efi_selftest   Heinrich Schuchardt
      • RFC: exclude partitions from efi_selftest   Michael Lawnick
      • RFC: exclude partitions from efi_selftest   Michael Lawnick
      • RFC: exclude partitions from efi_selftest   AKASHI Takahiro
      • RFC: exclude partitions from efi_selftest   Michael Lawnick
      • RFC: exclude partitions from efi_selftest   Michael Lawnick
      • RFC: exclude partitions from efi_selftest   AKASHI Takahiro
      • RFC: exclude partitions from efi_selftest   Michael Lawnick
      • RFC: exclude partitions from efi_selftest   AKASHI Takahiro
      • RFC: exclude partitions from efi_selftest   Michael Lawnick
      • RFC: exclude partitions from efi_selftest   Mark Kettenis
      • RFC: exclude partitions from efi_selftest   AKASHI Takahiro
• boot using encrypted   Cedrick Kukela
• [PATCH 0/2] mmc: bcm2835_sdhost: use fallback clock rate   Vincent Fazio
  • [PATCH 1/2] arm: rpi: fallback to max clock rate for MMC clock   Vincent Fazio
  • [PATCH 2/2] mmc: bcm2835-host: let firmware manage the clock divisor   Vincent Fazio
• [RFC][PATCH] mtd: spi: Set CONFIG_SF_DEFAULT_MODE default to 0   Marek Vasut
  • [RFC][PATCH] mtd: spi: Set CONFIG_SF_DEFAULT_MODE default to 0   Tom Rini
    • [RFC][PATCH] mtd: spi: Set CONFIG_SF_DEFAULT_MODE default to 0   Marek Vasut
      • [RFC][PATCH] mtd: spi: Set CONFIG_SF_DEFAULT_MODE default to 0   Tom Rini
      • [RFC][PATCH] mtd: spi: Set CONFIG_SF_DEFAULT_MODE default to 0   Marek Vasut
      • [RFC][PATCH] mtd: spi: Set CONFIG_SF_DEFAULT_MODE default to 0   Tom Rini
      • [RFC][PATCH] mtd: spi: Set CONFIG_SF_DEFAULT_MODE default to 0   Tom Rini
      • [RFC][PATCH] mtd: spi: Set CONFIG_SF_DEFAULT_MODE default to 0   Marek Vasut
  • [RFC][PATCH] mtd: spi: Set CONFIG_SF_DEFAULT_MODE default to 0   Tom Rini
• S25HS512 not functional with u-boot 2021.10.rc3   Harkirat Virk
  • S25HS512 not functional with u-boot 2021.10.rc3   Simon Glass
  • [EXT] S25HS512 not functional with u-boot 2021.10.rc3   Kuldeep Singh
• [PATCH] image: Avoid erroneous double byte-swap in CRC value   Alexandru Gagniuc
  • [PATCH] image: Avoid erroneous double byte-swap in CRC value   Tom Rini
• [PATCH] image: rsa: Move padding_algos to linker lists   Tom Rini
• [ANN] U-Boot v2021.10-rc4 released   Tom Rini
  • [ANN] U-Boot v2021.10-rc4 released   Christophe Leroy
    • [ANN] U-Boot v2021.10-rc4 released   Tom Rini
  • [ANN] U-Boot v2021.10-rc4 released   Simon Glass
    • [ANN] U-Boot v2021.10-rc4 released   Heinrich Schuchardt
      • [ANN] U-Boot v2021.10-rc4 released   Simon Glass
• [PATCH] mtd: spi-nor: Fix SF MTDIDS when registering multiple MTDs with DM enabled   Marek Vasut
  • [PATCH] mtd: spi-nor: Fix SF MTDIDS when registering multiple MTDs with DM enabled   Heiko Schocher
    • [PATCH] mtd: spi-nor: Fix SF MTDIDS when registering multiple MTDs with DM enabled   Marek Vasut
      • [PATCH] mtd: spi-nor: Fix SF MTDIDS when registering multiple MTDs with DM enabled   Patrice CHOTARD
      • [PATCH] mtd: spi-nor: Fix SF MTDIDS when registering multiple MTDs with DM enabled   Marek Vasut
      • [PATCH] mtd: spi-nor: Fix SF MTDIDS when registering multiple MTDs with DM enabled   Patrice CHOTARD
      • [PATCH] mtd: spi-nor: Fix SF MTDIDS when registering multiple MTDs with DM enabled   Marek Vasut
      • [PATCH] mtd: spi-nor: Fix SF MTDIDS when registering multiple MTDs with DM enabled   Patrick DELAUNAY
      • [PATCH] mtd: spi-nor: Fix SF MTDIDS when registering multiple MTDs with DM enabled   Marek Vasut
      • [PATCH] mtd: spi-nor: Fix SF MTDIDS when registering multiple MTDs with DM enabled   Patrick DELAUNAY
      • [PATCH] mtd: spi-nor: Fix SF MTDIDS when registering multiple MTDs with DM enabled   Patrick DELAUNAY
  • [PATCH] mtd: spi-nor: Fix SF MTDIDS when registering multiple MTDs with DM enabled   Marek Behún
    • [PATCH] mtd: spi-nor: Fix SF MTDIDS when registering multiple MTDs with DM enabled   Marek Vasut
• [PATCH 0/4] ARM: amlogic: add Radxa Zero   Christian Hewitt
  • [PATCH 1/4] ARM: dts: sort Amlogic Makefile section   Christian Hewitt
  • [PATCH 2/4] ARM: dts: add support for Radxa Zero   Christian Hewitt
  • [PATCH 3/4] boards: amlogic: add Radxa Zero defconfig   Christian Hewitt
  • [PATCH 4/4] doc: boards: amlogic: update for Radxa Zero   Christian Hewitt
  • [PATCH 0/4] ARM: amlogic: add Radxa Zero   Neil Armstrong
• [PATCH 3/3] imx8qm_mek: Increase CONFIG_SYS_BOOTM_LEN to 64MB   Peng Fan (OSS)
• U-BOOT missing Security support   Cedrick Kukela
  • U-BOOT missing Security support   Wolfgang Denk
    • U-BOOT missing Security support   Cedrick Kukela
• [PATCH] mtd: spi-nor-core: Add fixups for s25fs512s   tkuw584924 at gmail.com
  • [PATCH] mtd: spi-nor-core: Add fixups for s25fs512s   Pratyush Yadav
    • [PATCH] mtd: spi-nor-core: Add fixups for s25fs512s   Takahiro Kuwano
• [PATCH 0/3] Enhance Measured Boot   Masahisa Kojima
  • [PATCH 1/3] efi_loader: add SMBIOS table measurement   Masahisa Kojima
    • [PATCH 1/3] efi_loader: add SMBIOS table measurement   Ilias Apalodimas
      • [PATCH 1/3] efi_loader: add SMBIOS table measurement   Masahisa Kojima
  • [PATCH 2/3] efi_loader: add UEFI GPT measurement   Masahisa Kojima
    • [PATCH 2/3] efi_loader: add UEFI GPT measurement   Heinrich Schuchardt
      • [PATCH 2/3] efi_loader: add UEFI GPT measurement   Masahisa Kojima
  • [PATCH 3/3] efi_loader: add DeployedMode and AuditMode variable measurement   Masahisa Kojima
    • [PATCH 3/3] efi_loader: add DeployedMode and AuditMode variable measurement   Heinrich Schuchardt
      • [PATCH 3/3] efi_loader: add DeployedMode and AuditMode variable measurement   Masahisa Kojima
• [PATCH] xilinx: zynqmp: Set modeboot env variable in eMMC bootmode   Michal Simek
• [PATCH v2] cmd: mmc: Support mmc hwpartition user enh start -   Marek Vasut
• [PATCH] configs: lx2162a: Enable CONFIG_SPI_FLASH_MT35XU for lx2162a-qds   Kuldeep Singh
  • [PATCH] configs: lx2162a: Enable CONFIG_SPI_FLASH_MT35XU for lx2162a-qds   Wasim Khan
• [PATCH] rpi: always set fdt_addr with firmware-provided FDT address   Matthias Brugger
  • [PATCH] rpi: always set fdt_addr with firmware-provided FDT address   Mauro Salvini
    • [PATCH] rpi: always set fdt_addr with firmware-provided FDT address   Matthias Brugger
      • [PATCH] rpi: always set fdt_addr with firmware-provided FDT address   Mauro Salvini
      • [PATCH] rpi: always set fdt_addr with firmware-provided FDT address   Matthias Brugger
      • [PATCH] rpi: always set fdt_addr with firmware-provided FDT address   Ricardo Salveti
      • [PATCH] rpi: always set fdt_addr with firmware-provided FDT address   Matthias Brugger
      • [PATCH] rpi: always set fdt_addr with firmware-provided FDT address   Ricardo Salveti
• [PATCH v2 1/2] arm: dts: bcm283x: Add minimal smbios information   Matthias Brugger
• [PATCH] rpi: Conditionally add simple-framebuffer node   Matthias Brugger
• [PATCH] arm: orion5x: edminiv2: change maintainer   Simon Guinot
  • [PATCH] arm: orion5x: edminiv2: change maintainer   Tom Rini
  • [PATCH] arm: orion5x: edminiv2: change maintainer   Stefan Roese
  • [PATCH] arm: orion5x: edminiv2: change maintainer   Tom Rini
• [PATCH 1/1] phy: marvell: cp110: Support SATA invert polarity   Denis Odintsov
  • [PATCH 1/1] phy: marvell: cp110: Support SATA invert polarity   Stefan Roese
  • [PATCH 1/1] phy: marvell: cp110: Support SATA invert polarity   Stefan Roese
• [PATCH] arm64: zynqmp: Add device tree properties for nand flash   Michal Simek
• [PATCH] arm: zynq: Use s25fl256s1 compatible string on zedboard   Michal Simek
• [GIT PULL] rpi: updates for v2021.10   Matthias Brugger
  • [GIT PULL] rpi: updates for v2021.10   Peter Robinson
    • [GIT PULL] rpi: updates for v2021.10   Vincent Fazio
      • [GIT PULL] rpi: updates for v2021.10   Tom Rini
  • [GIT PULL] rpi: updates for v2021.10   Tom Rini
• [RFC PATCH] test/py: Check hashes produced by mkimage against known values   Alexandru Gagniuc
  • [RFC PATCH] test/py: Check hashes produced by mkimage against known values   Simon Glass
• [PATCH] ARM: dts: ast2600: Make WDT by default disabled   Chia-Wei Wang
  • [PATCH] ARM: dts: ast2600: Make WDT by default disabled   Ryan Chen
• [PATCH next] lib: hash-checksum: Use DM_HASH if supported   Chia-Wei Wang
• [PATCH] driver: gadget: fastboot: Link endpoint and descriptors   qianfanguijin at 163.com
• [PATCH 1/1] fs/squashfs: avoid superfluous messages   Heinrich Schuchardt
• [PATCH 1/1] fs: btrfs: avoid superfluous messages   Heinrich Schuchardt
  • [PATCH 1/1] fs: btrfs: avoid superfluous messages   Marek Behún
    • [PATCH 1/1] fs: btrfs: avoid superfluous messages   Tom Rini
• [PATCH 1/1] fs: avoid superfluous messages   Heinrich Schuchardt
  • [PATCH 1/1] fs: avoid superfluous messages   Mark Kettenis
    • [PATCH 1/1] fs: avoid superfluous messages   Mark Kettenis
  • [PATCH 1/1] fs: avoid superfluous messages   AKASHI Takahiro
• [PATCH next v4 00/11] aspeed: Support secure boot chain with FIT image verification   Chia-Wei Wang
  • [PATCH next v4 02/11] clk: ast2600: Add YCLK control for HACE   Chia-Wei Wang
  • [PATCH next v4 03/11] crypto: aspeed: Add AST2600 HACE support   Chia-Wei Wang
  • [PATCH next v4 04/11] ARM: dts: ast2600: Add HACE to device tree   Chia-Wei Wang
  • [PATCH next v4 05/11] clk: ast2600: Add RSACLK control for ACRY   Chia-Wei Wang
  • [PATCH next v4 06/11] crypto: aspeed: Add AST2600 ACRY support   Chia-Wei Wang
  • [PATCH next v4 07/11] ARM: dts: ast2600: Add ACRY to device tree   Chia-Wei Wang
  • [PATCH next v4 08/11] ast2600: spl: Locate load buffer in DRAM space   Chia-Wei Wang
  • [PATCH next v4 09/11] configs: ast2600-evb: Enable SPL FIT support   Chia-Wei Wang
  • [PATCH next v4 10/11] configs: aspeed: Make EXTRA_ENV_SETTINGS board specific   Chia-Wei Wang
  • [PATCH next v4 11/11] configs: ast2600: Boot kernel FIT in DRAM   Chia-Wei Wang
• [PATCH next v4 01/11] aspeed: ast2600: Enlarge SRAM size   Chia-Wei Wang
• [PATCH 0/3] efi_selftest: Update SIMPLE_NETWORK_PROTOCOL selftest   Masami Hiramatsu
  • [PATCH 1/3] efi_selftest: Use EFI_SIMPLE_NETWORK_PROTOCOL::GetStatus() for media check   Masami Hiramatsu
  • [PATCH 2/3] efi_selftest: Do not check EFI_SIMPLE_NETWORK_RECEIVE_INTERRUPT   Masami Hiramatsu
    • [PATCH 2/3] efi_selftest: Do not check EFI_SIMPLE_NETWORK_RECEIVE_INTERRUPT   Heinrich Schuchardt
      • [PATCH 2/3] efi_selftest: Do not check EFI_SIMPLE_NETWORK_RECEIVE_INTERRUPT   Masami Hiramatsu
  • [PATCH 3/3] efi_selftest: Recieve the packets until the receive buffer is empty   Masami Hiramatsu
    • [PATCH 3/3] efi_selftest: Recieve the packets until the receive buffer is empty   Heinrich Schuchardt
      • [PATCH 3/3] efi_selftest: Recieve the packets until the receive buffer is empty   Masami Hiramatsu
  • [PATCH 0/3] efi_selftest: Update SIMPLE_NETWORK_PROTOCOL selftest   Heinrich Schuchardt
    • [PATCH 0/3] efi_selftest: Update SIMPLE_NETWORK_PROTOCOL selftest   Masami Hiramatsu
• [PATCH v2] apalis/colibri_imx6: move setting bootcmd to defconfig   Oleksandr Suvorov
  • [PATCH v2] apalis/colibri_imx6: move setting bootcmd to defconfig   Marcel Ziswiler
• [PATCH 1/1] scripts/mailmapper: enable running with Python 3   Heinrich Schuchardt
  • [PATCH 1/1] scripts/mailmapper: enable running with Python 3   Tom Rini
• [PATCH v3] apalis/colibri_imx6: move setting bootcmd to defconfig   Oleksandr Suvorov
• [PATCH v4] apalis/colibri_imx6: move setting bootcmd to defconfig   Oleksandr Suvorov
• [PATCH] mailmap: Update mail address for Nicolas Saenz julienne   Matthias Brugger
  • [PATCH] mailmap: Update mail address for Nicolas Saenz julienne   Nicolas Saenz Julienne
• [PATCH] lib: rsa: fix dependency for SPL_RSA_VERIFY   Oleksandr Suvorov
• [PATCH 0/3] 30bpp framebuffer support   Mark Kettenis
  • [PATCH 1/3] video: Add 30bpp support   Mark Kettenis
    • [PATCH 1/3] video: Add 30bpp support   Simon Glass
      • [PATCH 1/3] video: Add 30bpp support   Mark Kettenis
  • [PATCH 2/3] efi_loader: GOP: Add 30bpp support   Mark Kettenis
    • [PATCH 2/3] efi_loader: GOP: Add 30bpp support   Heinrich Schuchardt
      • [PATCH 2/3] efi_loader: GOP: Add 30bpp support   Mark Kettenis
      • [PATCH 2/3] efi_loader: GOP: Add 30bpp support   Heinrich Schuchardt
      • [PATCH 2/3] efi_loader: GOP: Add 30bpp support   Mark Kettenis
    • [PATCH 2/3] efi_loader: GOP: Add 30bpp support   Simon Glass
  • [PATCH 3/3] video: simplefb: Add 30bpp support   Mark Kettenis
    • [PATCH 3/3] video: simplefb: Add 30bpp support   Simon Glass
• [PATCH 0/2] Enable strict signature verification for FIT   Oleksandr Suvorov
  • [PATCH 1/2] spl: Add CONFIG_SPL_FIT_SIGNATURE_STRICT   Oleksandr Suvorov
    • [PATCH 1/2] spl: Add CONFIG_SPL_FIT_SIGNATURE_STRICT   Alex G.
  • [PATCH 2/2] cmd: Add CONFIG_FIT_SIGNATURE_STRICT   Oleksandr Suvorov
    • [PATCH 2/2] cmd: Add CONFIG_FIT_SIGNATURE_STRICT   Igor Opaniuk
      • [PATCH 2/2] cmd: Add CONFIG_FIT_SIGNATURE_STRICT   Oleksandr Suvorov
• [PATCH] usb: xhci-dwc3: Add support for USB 3.1 controllers   Mark Kettenis
  • [PATCH] usb: xhci-dwc3: Add support for USB 3.1 controllers   Bin Meng
    • [PATCH] usb: xhci-dwc3: Add support for USB 3.1 controllers   Bin Meng
      • [PATCH] usb: xhci-dwc3: Add support for USB 3.1 controllers   Marek Vasut
      • [PATCH] usb: xhci-dwc3: Add support for USB 3.1 controllers   Bin Meng
• [PATCH v3 0/2] mtd: spi: nor: force mtd name to "nor%d"   Patrick Delaunay
  • [PATCH v3 2/2] mtd: spi: nor: force mtd name to "nor%d"   Patrick Delaunay
    • [PATCH v3 2/2] mtd: spi: nor: force mtd name to "nor%d"   Marek Behún
    • [PATCH v3 2/2] mtd: spi: nor: force mtd name to "nor%d"   Marek Behún
    • [PATCH v3 2/2] mtd: spi: nor: force mtd name to "nor%d"   Marek Vasut
    • [PATCH v3 2/2] mtd: spi: nor: force mtd name to "nor%d"   Patrick DELAUNAY
      • [PATCH v3 2/2] mtd: spi: nor: force mtd name to "nor%d"   Marek Vasut
  • [PATCH v3 0/2] mtd: spi: nor: force mtd name to "nor%d"   Marek Vasut
• [PATCH v3 1/2] mtd: cfi_flash: use cfi_flash_num_flash_banks only when supported   Patrick Delaunay
  • [PATCH v3 1/2] mtd: cfi_flash: use cfi_flash_num_flash_banks only when supported   Marek Vasut
  • [PATCH v3 1/2] mtd: cfi_flash: use cfi_flash_num_flash_banks only when supported   Patrick DELAUNAY
    • [PATCH v3 1/2] mtd: cfi_flash: use cfi_flash_num_flash_banks only when supported   Marek Vasut
      • [PATCH v3 1/2] mtd: cfi_flash: use cfi_flash_num_flash_banks only when supported   Patrick DELAUNAY
• [PATCH] fs: fat: check for buffer size before reading blocks   Oleksandr Suvorov
  • [PATCH] fs: fat: check for buffer size before reading blocks   Heinrich Schuchardt
    • [PATCH] fs: fat: check for buffer size before reading blocks   Oleksandr Suvorov
• RISC-V MC schedule is out   Atish Patra
• [PATCH] imx: imx7d-sdb: fix ethernet, sync .dts with linux   Fabio Estevam
  • [PATCH] imx: imx7d-sdb: fix ethernet, sync .dts with linux   Rasmus Villemoes
    • [PATCH] imx: imx7d-sdb: fix ethernet, sync .dts with linux   Tom Rini
  • [PATCH] imx: imx7d-sdb: fix ethernet, sync .dts with linux   Rasmus Villemoes
    • [PATCH] imx: imx7d-sdb: fix ethernet, sync .dts with linux   Tom Rini
• [PATCH] xtensa: Put U-Boot version string at correct place by linker script   Tom Rini
  • [PATCH] xtensa: Put U-Boot version string at correct place by linker script   Francesco Dolcini
    • [PATCH] xtensa: Put U-Boot version string at correct place by linker script   Tom Rini
      • [PATCH] xtensa: Put U-Boot version string at correct place by linker script   Francesco Dolcini
      • [PATCH] xtensa: Put U-Boot version string at correct place by linker script   Tom Rini
      • [PATCH] xtensa: Put U-Boot version string at correct place by linker script   Francesco Dolcini
      • [PATCH] xtensa: Put U-Boot version string at correct place by linker script   Max Filippov
      • [PATCH] xtensa: Put U-Boot version string at correct place by linker script   Tom Rini
  • [PATCH] xtensa: Put U-Boot version string at correct place by linker script   Max Filippov
    • [PATCH] xtensa: Put U-Boot version string at correct place by linker script   Tom Rini
      • [PATCH] xtensa: Put U-Boot version string at correct place by linker script   Max Filippov
• [PATCH 10/11] sandbox: mmc: Support a backing file   Tom Rini
  • [PATCH 10/11] sandbox: mmc: Support a backing file   Simon Glass
  • [PATCH 10/11] sandbox: mmc: Support a backing file   Simon Glass
    • [PATCH 10/11] sandbox: mmc: Support a backing file   Tom Rini
      • [PATCH 10/11] sandbox: mmc: Support a backing file   Simon Glass
      • [PATCH 10/11] sandbox: mmc: Support a backing file   Simon Glass
• [PATCH v2] powerpc: mpc: Put U-Boot version string at correct place by linker script   Tom Rini
• [PATCH 1/1] powerpc: Drop version_string placement optimization   Tom Rini
  • [PATCH 1/1] powerpc: Drop version_string placement optimization   Tom Rini
• IMX8MM fsl_esdhc_imx UHS/HS200/HS400 not working?   Tim Harvey
  • IMX8MM fsl_esdhc_imx UHS/HS200/HS400 not working?   Tim Harvey
• [PATCH 0/4] Add EPSON RX8035 RTC support   Mathew McBride
  • [PATCH 3/4] rtc: rx8025: set date in a single i2c transaction   Mathew McBride
  • [PATCH 4/4] rtc: rx8025: revise single register write to use offset   Mathew McBride
• [PATCH 1/4] rtc: rx8025: drop non-DM support   Mathew McBride
• [PATCH 2/4] rtc: rx8025: add support for EPSON RX8035.   Mathew McBride
• [PATCH v3 01/10] ARM: meson: Sync Amlogic DT from Linux 5.14   Neil Armstrong
  • [PATCH v3 01/10] ARM: meson: Sync Amlogic DT from Linux 5.14   Neil Armstrong
• [PATCH v3 02/10] usb: dwc3: meson-gxl: add AXG compatible   Neil Armstrong
  • [PATCH v3 02/10] usb: dwc3: meson-gxl: add AXG compatible   Vyacheslav
• [PATCH v3 03/10] ARM: meson: keep HW order for MMC devices   Neil Armstrong
• [PATCH v3 04/10] ARM: meson-axg: remove local USB nodes   Neil Armstrong
• [PATCH v3 05/10] configs: meson64: add SCSI boot target   Neil Armstrong
• [PATCH v3 06/10] distro_bootcmd: run pci enum for scsi_boot just like it is done for nvme_boot   Neil Armstrong
• [PATCH v3 07/10] ARM: amlogic: add support for Odroid-HC4 device   Neil Armstrong
• [PATCH v3 08/10] doc: boards: amlogic: update for Odroid HC4   Neil Armstrong
• [PATCH v3 09/10] ARM: meson: add Beelink GS-King X board   Neil Armstrong
• [PATCH v3 10/10] ARM: amlogic: add Banana Pi M5   Neil Armstrong
• [PATCH] arm: rpi: perform XHCI firmware upload only once   Marek Szyprowski
  • [PATCH] arm: rpi: perform XHCI firmware upload only once   nicolas saenz julienne
  • [PATCH] arm: rpi: perform XHCI firmware upload only once   Matthias Brugger
    • [PATCH] arm: rpi: perform XHCI firmware upload only once   Matthias Brugger
• [PATCH] distro_bootcmd: change the default dtb search path to include default kernel dtbs directory   Qu Wenruo
  • [PATCH] distro_bootcmd: change the default dtb search path to include default kernel dtbs directory   Mark Kettenis
    • [PATCH] distro_bootcmd: change the default dtb search path to include default kernel dtbs directory   Qu Wenruo
      • [PATCH] distro_bootcmd: change the default dtb search path to include default kernel dtbs directory   Mark Kettenis
      • [PATCH] distro_bootcmd: change the default dtb search path to include default kernel dtbs directory   Qu Wenruo
• Systemd-boot not properly loading device tree, when loaded by U-boot (ARM64, tested on RK3399)   Qu Wenruo
  • [systemd-devel] Systemd-boot not properly loading device tree, when loaded by U-boot (ARM64, tested on RK3399)   Lennart Poettering
    • [systemd-devel] Systemd-boot not properly loading device tree, when loaded by U-boot (ARM64, tested on RK3399)   Qu Wenruo
  • [systemd-devel] Systemd-boot not properly loading device tree, when loaded by U-boot (ARM64, tested on RK3399)   Qu Wenruo
• [PATCH] net: update NXP copyright text   Vladimir Oltean
• [PATCH] test/py: tpm2: Skip tpm pytest based on env variable   T Karthik Reddy
  • [PATCH] test/py: tpm2: Skip tpm pytest based on env variable   Tom Rini
    • [PATCH] test/py: tpm2: Skip tpm pytest based on env variable   Ilias Apalodimas
      • [PATCH] test/py: tpm2: Skip tpm pytest based on env variable   Michal Simek
      • [PATCH] test/py: tpm2: Skip tpm pytest based on env variable   Ilias Apalodimas
  • [PATCH] test/py: tpm2: Skip tpm pytest based on env variable   Tom Rini
• [PATCH 00/11] Drive-by PCI W=1 cleanups   Vladimir Oltean
  • [PATCH 01/11] pci: provide prototype for pci_skip_dev outside of #if defined(CONFIG_DM_PCI_COMPAT)   Vladimir Oltean
    • [PATCH 01/11] pci: provide prototype for pci_skip_dev outside of #if defined(CONFIG_DM_PCI_COMPAT)   Bin Meng
  • [PATCH 02/11] pci: include pci_internal.h inside pci_auto.c   Vladimir Oltean
    • [PATCH 02/11] pci: include pci_internal.h inside pci_auto.c   Bin Meng
  • [PATCH 03/11] pci: pci_bar_show can be static   Vladimir Oltean
    • [PATCH 03/11] pci: pci_bar_show can be static   Bin Meng
  • [PATCH 04/11] pci: pci_header_show can be static   Vladimir Oltean
    • [PATCH 04/11] pci: pci_header_show can be static   Bin Meng
  • [PATCH 05/11] pci: pciinfo_header can be static   Vladimir Oltean
    • [PATCH 05/11] pci: pciinfo_header can be static   Bin Meng
  • [PATCH 06/11] pci: pci_write_config can be static   Vladimir Oltean
    • [PATCH 06/11] pci: pci_write_config can be static   Bin Meng
  • [PATCH 07/11] pci: pci_read_config can be static   Vladimir Oltean
    • [PATCH 07/11] pci: pci_read_config can be static   Bin Meng
  • [PATCH 08/11] pci: _dm_pci_phys_to_bus can be static   Vladimir Oltean
    • [PATCH 08/11] pci: _dm_pci_phys_to_bus can be static   Bin Meng
  • [PATCH 09/11] pci: layerscape: ls_pcie_conf_address can be static   Vladimir Oltean
    • [PATCH 09/11] pci: layerscape: ls_pcie_conf_address can be static   Bin Meng
  • [PATCH 10/11] pci: pcie_layerscape_fixup_common: include fdt_support.h for ft_pci_setup   Vladimir Oltean
    • [PATCH 10/11] pci: pcie_layerscape_fixup_common: include fdt_support.h for ft_pci_setup   Bin Meng
  • [PATCH 11/11] pci: pcie_layerscape_fixup_common: lx2_board_fix_fdt can be static   Vladimir Oltean
    • [PATCH 11/11] pci: pcie_layerscape_fixup_common: lx2_board_fix_fdt can be static   Bin Meng
• [PATCH] board: freescale: lx216x : increase fdt blob size   Wasim Khan
  • [PATCH] board: freescale: lx216x : increase fdt blob size   Tom Rini
• [PATCH v3 1/2] spi: rockchip_sfc: Implement set_speed logic   Jon Lin
  • [PATCH v3 2/2] spi: rockchip_sfc: Using read_poll   Jon Lin
• [PATCH] m68k: Add missing ENTRY entry in linker script   Tom Rini
  • [PATCH] m68k: Add missing ENTRY entry in linker script   Tom Rini
• [PATCH 00/17] RFC: Split configs between U-Boot proper and SPL builds   Simon Glass
  • [PATCH 01/17] env: Avoid checking ENV_IS_IN when env disabled   Simon Glass
  • [PATCH 02/17] x86: Fix qemu condition for arch_cpu_init()   Simon Glass
  • [PATCH 03/17] acpi: Add a Kconfig for SPL   Simon Glass
  • [PATCH 04/17] cmd: Add an SPL Kconfig for CMDLINE and HUSH   Simon Glass
  • [PATCH 05/17] cros_ec: Add SPL Kconfigs for cros_ec features   Simon Glass
  • [PATCH 06/17] power: Add SPL Kconfig for sandbox pmc emulator   Simon Glass
  • [PATCH 07/17] test: Add SPL Kconfig for compression tests   Simon Glass
  • [PATCH 08/17] sandbox: Enable MISC support for the SPL build   Simon Glass
  • [PATCH 09/17] serial: Tidy up the Makefile condition for DM_SERIAL   Simon Glass
  • [PATCH 10/17] virtio: Add SPL Kconfig for virtio   Simon Glass
  • [PATCH 11/17] kconfig: Refactor code into separate writer functions   Simon Glass
  • [PATCH 12/17] kconfig: Support writing separate SPL files   Simon Glass
  • [PATCH 13/17] Makefile: Include the config for the phase being built   Simon Glass
  • [PATCH 14/17] Makefile: Use empty SPL_ and SPL_TPL_ vars   Simon Glass
  • [PATCH 15/17] Makefile: Support ad-hoc COMFIX_SPL_IMAGE_SIZE et al   Simon Glass
  • [PATCH 16/17] kconfig: Update CONFIG_IS_ENABLED() for split files   Simon Glass
  • [PATCH 17/17] kconfig: Add a new CONFIG() macro   Simon Glass
• [RFC 0/2] mtd: Support slc-mode for Toshiba TC58TEG5DCLTA00   Chris Morgan
  • [RFC 1/2] mtd: Add partial support for Linux slc-mode for MLC NAND   Chris Morgan
  • [RFC 2/2] mtd: Add pairing info for Toshiba TC58TEG5DCLTA00 NAND   Chris Morgan
• [PATCH 1/2] arm: mach-k3: common: Make sure firmware sections are loaded prior to armv8 startup   Tom Rini
• [PATCH 1/2] firmware: ti_sci: Include linux/err.h in ti_sci_protocol.h   Tom Rini
• [PATCH 2/2] arm: mach-k3: common: Add a release_resources_for_core_shutdown() stub   Tom Rini
• Question about extension board used in U-boot   Ying-Chun Liu (PaulLiu)
  • Question about extension board used in U-boot   François Ozog
    • Question about extension board used in U-boot   François Ozog
      • Question about extension board used in U-boot   Heinrich Schuchardt
      • Question about extension board used in U-boot   Ying-Chun Liu (PaulLiu)
    • Modules for carrier boards [Was: Re: Question about extension board used in U-boot]   Daniel Thompson
      • Modules for carrier boards [Was: Re: Question about extension board used in U-boot]   François Ozog
• [PATCH v8 0/5] Add SIMATIC IOT2050 board support   Jan Kiszka
  • [PATCH v8 1/5] arm: dts: Add IOT2050 device tree files   Jan Kiszka
  • [PATCH v8 2/5] board: siemens: Add support for SIMATIC IOT2050 devices   Jan Kiszka
  • [PATCH v8 3/5] arm64: dts: ti: k3-am65-mcu: Add RTI watchdog entry   Jan Kiszka
  • [PATCH v8 4/5] watchdog: rti_wdt: Add support for loading firmware   Jan Kiszka
  • [PATCH v8 5/5] iot2050: Enable watchdog support, but do not auto-start it   Jan Kiszka
• [PATCH] fdt_support.h: Remove duplicated declarations   Bin Meng
  • [PATCH] fdt_support.h: Remove duplicated declarations   Vladimir Oltean
    • [PATCH] fdt_support.h: Remove duplicated declarations   Simon Glass
• Please pull u-boot-dm   Simon Glass
  • Please pull u-boot-dm   Ilias Apalodimas
    • Please pull u-boot-dm   Simon Glass
      • Please pull u-boot-dm   Ilias Apalodimas
      • Please pull u-boot-dm   François Ozog
      • Please pull u-boot-dm   Simon Glass
    • Please pull u-boot-dm   Tom Rini
      • Please pull u-boot-dm   Ilias Apalodimas
  • Please pull u-boot-dm   Tom Rini
• [PATCH 0/2] DSA cleanups   Vladimir Oltean
  • [PATCH 2/2] net: dsa: remove unused variables   Vladimir Oltean
    • [PATCH 2/2] net: dsa: remove unused variables   Ramon Fried
• [PATCH 1/2] net: dsa: pass CPU port fixed PHY to .port_disable   Vladimir Oltean
  • [PATCH 1/2] net: dsa: pass CPU port fixed PHY to .port_disable   Ramon Fried
  • [PATCH 1/2] net: dsa: pass CPU port fixed PHY to .port_disable   Tim Harvey
• [PATCH] net: phy: genphy_init can be static   Vladimir Oltean
  • [PATCH] net: phy: genphy_init can be static   Bin Meng
    • [PATCH] net: phy: genphy_init can be static   Ramon Fried
• [PATCH 0/4] phy-mode cleanup   Vladimir Oltean
  • [PATCH 1/4] net: replace the "xfi" phy-mode with "10gbase-r"   Vladimir Oltean
    • [PATCH 1/4] net: replace the "xfi" phy-mode with "10gbase-r"   Ramon Fried
  • [PATCH 2/4] net: freescale: replace usage of phy-mode = "sgmii-2500" with "2500base-x"   Vladimir Oltean
    • [PATCH 2/4] net: freescale: replace usage of phy-mode = "sgmii-2500" with "2500base-x"   Ramon Fried
  • [PATCH 3/4] net: enetc: remove support for "xgmii" phy-mode   Vladimir Oltean
    • [PATCH 3/4] net: enetc: remove support for "xgmii" phy-mode   Ramon Fried
  • [PATCH 4/4] net: dsa: felix: remove "xgmii" phy-mode   Vladimir Oltean
    • [PATCH 4/4] net: dsa: felix: remove "xgmii" phy-mode   Ramon Fried
• [PATCH 0/2] TSEC Ethernet driver phy-mode changes   Vladimir Oltean
• [PATCH 1/2] net: tsec: only call tsec_get_interface as fallback to DT-specified PHY mode   Vladimir Oltean
  • [PATCH 1/2] net: tsec: only call tsec_get_interface as fallback to DT-specified PHY mode   Bin Meng
    • [PATCH 1/2] net: tsec: only call tsec_get_interface as fallback to DT-specified PHY mode   Ramon Fried
• [PATCH 2/2] net: tsec: read the phy-mode property as fallback to phy-connection-type   Vladimir Oltean
  • [PATCH 2/2] net: tsec: read the phy-mode property as fallback to phy-connection-type   Bin Meng
    • [PATCH 2/2] net: tsec: read the phy-mode property as fallback to phy-connection-type   Ramon Fried
• [PATCH 0/5] Apple M1 Support   Mark Kettenis
  • [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC   Mark Kettenis
    • [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC   Bin Meng
      • [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC   Bin Meng
      • [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC   Mark Kettenis
      • [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC   Tom Rini
      • [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC   Bin Meng
      • [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC   Tom Rini
      • [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC   Mark Kettenis
      • [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC   Simon Glass
      • [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC   Mark Kettenis
    • [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC   Simon Glass
      • [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC   Mark Kettenis
      • [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC   Simon Glass
  • [PATCH 2/5] serial: s5p: Add Apple M1 support   Mark Kettenis
    • [PATCH 2/5] serial: s5p: Add Apple M1 support   Bin Meng
      • [PATCH 2/5] serial: s5p: Add Apple M1 support   Mark Kettenis
    • [PATCH 2/5] serial: s5p: Add Apple M1 support   Simon Glass
      • [PATCH 2/5] serial: s5p: Add Apple M1 support   Simon Glass
  • [PATCH 3/5] misc: Add Apple DART driver   Mark Kettenis
    • [PATCH 3/5] misc: Add Apple DART driver   Simon Glass
      • [PATCH 3/5] misc: Add Apple DART driver   Mark Kettenis
      • [PATCH 3/5] misc: Add Apple DART driver   Simon Glass
      • [PATCH 3/5] misc: Add Apple DART driver   Simon Glass
      • [PATCH 3/5] misc: Add Apple DART driver   Mark Kettenis
      • [PATCH 3/5] misc: Add Apple DART driver   Simon Glass
  • [PATCH 4/5] arm: dts: apple: Add preliminary device trees   Mark Kettenis
    • [PATCH 4/5] arm: dts: apple: Add preliminary device trees   Simon Glass
      • [PATCH 4/5] arm: dts: apple: Add preliminary device trees   Simon Glass
  • [PATCH 5/5] doc: board: apple: Add Apple M1 documentation   Mark Kettenis
    • [PATCH 5/5] doc: board: apple: Add Apple M1 documentation   Bin Meng
    • [PATCH 5/5] doc: board: apple: Add Apple M1 documentation   Simon Glass
      • [PATCH 5/5] doc: board: apple: Add Apple M1 documentation   Simon Glass
    • [PATCH 5/5] doc: board: apple: Add Apple M1 documentation   Igor Opaniuk
  • [PATCH 0/5] Apple M1 Support   Simon Glass
    • [PATCH 0/5] Apple M1 Support   Mark Kettenis
      • [PATCH 0/5] Apple M1 Support   Simon Glass
      • [PATCH 0/5] Apple M1 Support   Mark Kettenis
      • [PATCH 0/5] Apple M1 Support   Simon Glass
      • [PATCH 0/5] Apple M1 Support   Mark Kettenis
      • [PATCH 0/5] Apple M1 Support   Simon Glass
      • [PATCH 0/5] Apple M1 Support   Simon Glass
      • [PATCH 0/5] Apple M1 Support   Mark Kettenis
      • [PATCH 0/5] Apple M1 Support   Simon Glass
• [SPECIFICATION RFC v3] The firmware and bootloader log specification   Alec Brown
  • Re: [SPECIFICATION RFC v3] The firmware and bootloader log specification   Heinrich Schuchardt
    • [SPECIFICATION RFC v3] The firmware and bootloader log specification   Peter Stuge
  • [SPECIFICATION RFC v3] The firmware and bootloader log specification   Julius Werner
• Two jobs at once on denx-vulcan?   Simon Glass
  • Two jobs at once on denx-vulcan?   Harald Seiler
    • Two jobs at once on denx-vulcan?   Simon Glass
      • Two jobs at once on denx-vulcan?   Harald Seiler
      • Two jobs at once on denx-vulcan?   Tom Rini
      • Two jobs at once on denx-vulcan?   Simon Glass
      • Two jobs at once on denx-vulcan?   Tom Rini
      • Two jobs at once on denx-vulcan?   Simon Glass
      • Two jobs at once on denx-vulcan?   Tom Rini
• [PATCH] Makefile: Add a warning about ad-hoc CONFIG options   Simon Glass
  • [PATCH] Makefile: Add a warning about ad-hoc CONFIG options   Tom Rini
    • [PATCH] Makefile: Add a warning about ad-hoc CONFIG options   Simon Glass
      • [PATCH] Makefile: Add a warning about ad-hoc CONFIG options   Tom Rini
• [PATCH 0/3] ARM: meson: add support for JetHub D1/H1   Vyacheslav Bocharov
  • [PATCH 2/3] ARM: amlogic: add JetHub D1/H1 device support   Vyacheslav Bocharov
    • [PATCH 2/3] ARM: amlogic: add JetHub D1/H1 device support   Neil Armstrong
  • [PATCH 3/3] ARM: amlogic: add JetHub D1/H1 docs   Vyacheslav Bocharov
    • [PATCH 3/3] ARM: amlogic: add JetHub D1/H1 docs   Neil Armstrong
• [PATCH 1/3] ARM: amlogic: add JetHub common config header   Vyacheslav Bocharov
  • [PATCH 1/3] ARM: amlogic: add JetHub common config header   Neil Armstrong
• [PATCH] board: fsl_validate: Fix Double free Issue   Kshitiz Varshney
• [PATCH v2 0/3] ARM: meson: add support for JetHub D1/H1   Vyacheslav Bocharov
  • [PATCH v2 2/3] ARM: amlogic: add JetHub D1/H1 device support   Vyacheslav Bocharov
    • [PATCH v2 2/3] ARM: amlogic: add JetHub D1/H1 device support   Neil Armstrong
      • [PATCH v2 2/3] ARM: amlogic: add JetHub D1/H1 device support   Vyacheslav
  • [PATCH v2 3/3] ARM: amlogic: add JetHub D1/H1 docs   Vyacheslav Bocharov
    • [PATCH v2 3/3] ARM: amlogic: add JetHub D1/H1 docs   Neil Armstrong
• [PATCH v2 1/3] ARM: amlogic: add JetHub common config header   Vyacheslav Bocharov
• [PATCH v4 0/5] env: Allow environment in text files   Simon Glass
  • [PATCH v4 2/5] doc: Move environment documentation to rST   Simon Glass
    • [PATCH v4 2/5] doc: Move environment documentation to rST   Wolfgang Denk
  • [PATCH v4 3/5] env: Allow U-Boot scripts to be placed in a .env file   Simon Glass
    • [PATCH v4 3/5] env: Allow U-Boot scripts to be placed in a .env file   Wolfgang Denk
  • [PATCH v4 5/5] sandbox: Use a text-based environment   Simon Glass
• [PATCH v4 1/5] sandbox: Drop distro_boot   Simon Glass
• [PATCH v4 4/5] env: Allow environment files to use the C preprocessor   Simon Glass
  • [PATCH v4 4/5] env: Allow environment files to use the C preprocessor   Wolfgang Denk
• [RESEND PATCH v2 0/4] test: Try to deal with some co-dependent tests   Simon Glass
  • [RESEND PATCH v2 1/4] test: Allow vboot tests to run in parallel   Simon Glass
  • [RESEND PATCH v2 2/4] test: Allow hush tests to run in parallel   Simon Glass
  • [RESEND PATCH v2 3/4] test: Allow tpm2 tests to run in parallel   Simon Glass
  • [RESEND PATCH v2 4/4] doc: test: Explain how to run pytests in parallel   Simon Glass
• [PATCH v4 0/5] sf: Add documentation and an 'sf mmap' command   Simon Glass
  • [PATCH v4 1/5] command: Use a constant pointer for the help   Simon Glass
  • [PATCH v4 2/5] sf: Use const for the stage name   Simon Glass
  • [PATCH v4 3/5] sf: Tidy up code to avoid #ifdef   Simon Glass
    • [PATCH v4 3/5] sf: Tidy up code to avoid #ifdef   Pratyush Yadav
      • [PATCH v4 3/5] sf: Tidy up code to avoid #ifdef   Simon Glass
  • [PATCH v4 4/5] sf: doc: Add documentation for the 'sf' command   Simon Glass
  • [PATCH v4 5/5] sf: Provide a command to access memory-mapped SPI   Simon Glass
• [PATCH v4 0/2] doc: Clarify how U-Boot makes use of devicetree   Simon Glass
  • [PATCH v4 1/2] doc: Add mention of the /config binding   Simon Glass
  • [PATCH v4 2/2] doc: Add documentation about devicetree usage   Simon Glass
    • [PATCH v4 2/2] doc: Add documentation about devicetree usage   François Ozog
      • [PATCH v4 2/2] doc: Add documentation about devicetree usage   Simon Glass
      • [PATCH v4 2/2] doc: Add documentation about devicetree usage   Heinrich Schuchardt
• [PATCH v6 00/11] vpl: Introduce a verifying program loader   Simon Glass
  • [PATCH v6 02/11] doc: Expand SPL docs to explain the phase and config   Simon Glass
  • [PATCH v6 03/11] test: Tidy up test building with SPL   Simon Glass
  • [PATCH v6 04/11] bloblist: Correct Kconfig dependencies   Simon Glass
  • [PATCH v6 05/11] avb: Don't build in SPL   Simon Glass
  • [PATCH v6 06/11] Makefile: Simplify devicetree rules for SPL/TPL   Simon Glass
  • [PATCH v6 07/11] Makefile: Tidy up the TPL build rules   Simon Glass
  • [PATCH v6 08/11] binman: Add VPL support   Simon Glass
  • [PATCH v6 09/11] Introduce Verifying Program Loader (VPL)   Simon Glass
  • [PATCH v6 10/11] vpl: Add Kconfig options for VPL   Simon Glass
  • [PATCH v6 11/11] sandbox: Add a build for VPL   Simon Glass
• [PATCH v6 01/11] doc: Convert SPL documentation to ReST   Simon Glass
• [PATCH] board: pm926x: remove unused CONFIG_SYS_AT91_CPU_NAME   Eugen.Hristev at microchip.com
• [PATCH] net: remove unused CONFIG_DRIVER_AT91EMAC_*   Eugen.Hristev at microchip.com
• [PATCH] ARM: at91: remove references to RM9200DK   Eugen.Hristev at microchip.com
• [PATCH 1/2] include: dt-bindings: mfd: add atmel flexcom include file   Eugen.Hristev at microchip.com
• Rename of the u-boot-atmel custodian tree   Eugen.Hristev at microchip.com
  • Rename of the u-boot-atmel custodian tree   Anatolij Gustschin
• [PATCH v3 0/3] ARM: meson: add support for JetHub D1/H1   Vyacheslav Bocharov
  • [PATCH v3 2/3] ARM: amlogic: add JetHub D1/H1 device support   Vyacheslav Bocharov
  • [PATCH v3 3/3] ARM: amlogic: add JetHub D1/H1 docs   Vyacheslav Bocharov
  • [PATCH v3 0/3] ARM: meson: add support for JetHub D1/H1   Neil Armstrong
• [PATCH v3 1/3] ARM: amlogic: add JetHub common config header   Vyacheslav Bocharov
  • [PATCH v3 1/3] ARM: amlogic: add JetHub common config header   Neil Armstrong
• [PATCH 1/5] ARM: rmobile: Enable board detection when FIT is enabled   Adam Ford
  • [PATCH 1/5] ARM: rmobile: Enable board detection when FIT is enabled   Marek Vasut
• [PATCH v2 1/1] fs: avoid superfluous messages   Heinrich Schuchardt
  • [PATCH v2 1/1] fs: avoid superfluous messages   Simon Glass
  • [PATCH v2 1/1] fs: avoid superfluous messages   Tom Rini
• [PATCH] i2c: rcar_i2c: Enable configuring SCL rise and fall times   Adam Ford
  • [PATCH] i2c: rcar_i2c: Enable configuring SCL rise and fall times   Heiko Schocher
    • [PATCH] i2c: rcar_i2c: Enable configuring SCL rise and fall times   Marek Vasut
  • [PATCH] i2c: rcar_i2c: Enable configuring SCL rise and fall times   Heiko Schocher
• [PATCH 1/4] usb: add support for ULPI/SERIAL/HSIC PHY modes   Matthias Schiffer
  • [PATCH 2/4] include/configs: replace MXC_EHCI_MODE_SERIAL with PORT_PTS_SERIAL   Matthias Schiffer
  • [PATCH 3/4] usb: ehci-ci: remove redundant PORTSC flag definitions   Matthias Schiffer
  • [PATCH 4/4] usb: ehci-mx6: use phy_type from device tree   Matthias Schiffer
• [PATCH v2] board: freescale: lx216x : increase fdt blob size   Wasim Khan
  • [PATCH v2] board: freescale: lx216x : increase fdt blob size   Tom Rini
• [PATCH] drivers: pmic: Add sysreset driver to da9063 pmic device   Alexandre Ghiti
  • [PATCH] drivers: pmic: Add sysreset driver to da9063 pmic device   Heinrich Schuchardt
    • [PATCH] drivers: pmic: Add sysreset driver to da9063 pmic device   Alexandre Ghiti
  • [PATCH] drivers: pmic: Add sysreset driver to da9063 pmic device   Jaehoon Chung
    • [PATCH] drivers: pmic: Add sysreset driver to da9063 pmic device   Alexandre Ghiti
• [PATCH] remoteproc: migrate uclass to livetree   Patrick Delaunay
  • [PATCH] remoteproc: migrate uclass to livetree   Simon Glass
• [PATCH] demo: migrate uclass to livetree   Patrick Delaunay
  • [PATCH] demo: migrate uclass to livetree   Simon Glass
• [PATCH V2 1/6] ARM: rmobile: Enable board detection when FIT is enabled   Adam Ford
  • [PATCH V2 2/6] ARM: rmobile: beacon: Support RZ/G2 [M/N/H] on TARGET_BEACON_RZG2M   Adam Ford
  • [PATCH V2 3/6] ARM: rmobile: beacon: Remove duplicated for RZ/G2 M/N/H   Adam Ford
  • [PATCH V2 4/6] ARM: rmobile: Beacon: Remove dead code   Adam Ford
  • [PATCH V2 5/6] ARM: rmobile: beacon: Enable reference clocks for USB and AVB   Adam Ford
  • [PATCH V2 6/6] ARM: rmobile: Rename r8a774a1_beacon_defconfig to rzg2_beacon_defconfig   Adam Ford
• [PATCH] reboot-mode: migrate uclass to livetree   Patrick Delaunay
  • [PATCH] reboot-mode: migrate uclass to livetree   Simon Glass
• [PATCHv5] drivers: tpm2: update reset gpio semantics   Ilias Apalodimas
  • [PATCHv5] drivers: tpm2: update reset gpio semantics   Tom Rini
• [PATCH 0/3] Add SAMA5D2 PWM Support   Dan Sneddon
  • [PATCH 1/3] pwm: Add PWM driver for SAMA5D2   Dan Sneddon
  • [PATCH 2/3] dt-bindings: pwm: pwm-at91: Add PWM bindings for A5D2   Dan Sneddon
  • [PATCH 3/3] ARM:dts: sama5d2: Add pwm definition   Dan Sneddon
• [PATCH] rtc: ds1307: Handle oscillator-stop bit correctly   Mark Tomlinson
  • [PATCH] rtc: ds1307: Handle oscillator-stop bit correctly   Simon Glass
• [PATCH v2 0/3] Enhance Measured Boot   Masahisa Kojima
  • [PATCH v2 1/3] efi_loader: add SMBIOS table measurement   Masahisa Kojima
    • [PATCH v2 1/3] efi_loader: add SMBIOS table measurement   Simon Glass
      • [PATCH v2 1/3] efi_loader: add SMBIOS table measurement   Ilias Apalodimas
      • [PATCH v2 1/3] efi_loader: add SMBIOS table measurement   Simon Glass
      • [PATCH v2 1/3] efi_loader: add SMBIOS table measurement   Ilias Apalodimas
      • [PATCH v2 1/3] efi_loader: add SMBIOS table measurement   Simon Glass
      • [PATCH v2 1/3] efi_loader: add SMBIOS table measurement   Ilias Apalodimas
  • [PATCH v2 2/3] efi_loader: add UEFI GPT measurement   Masahisa Kojima
    • [PATCH v2 2/3] efi_loader: add UEFI GPT measurement   Ilias Apalodimas
  • [PATCH v2 3/3] efi_loader: add DeployedMode and AuditMode variable measurement   Masahisa Kojima
    • [PATCH v2 3/3] efi_loader: add DeployedMode and AuditMode variable measurement   Ilias Apalodimas
      • [PATCH v2 3/3] efi_loader: add DeployedMode and AuditMode variable measurement   Masahisa Kojima
• [PULL] Pull request for u-boot master / v2021.10 = u-boot-stm32-20210921   Patrick DELAUNAY
  • [PULL] Pull request for u-boot master / v2021.10 = u-boot-stm32-20210921   Tom Rini
• [PATCH] ARM: dts: imx6-apalis: enable watchdog   Oleksandr Suvorov
  • [PATCH] ARM: dts: imx6-apalis: enable watchdog   Igor Opaniuk
  • [PATCH] ARM: dts: imx6-apalis: enable watchdog   Peng Fan (OSS)
• [PATCH] board/freescale/vid : move platform specific definitions   Wasim Khan
  • [PATCH] board/freescale/vid : move platform specific definitions   Tom Rini
    • [PATCH] board/freescale/vid : move platform specific definitions   Wasim Khan (OSS)
      • [PATCH] board/freescale/vid : move platform specific definitions   Tom Rini
      • [PATCH] board/freescale/vid : move platform specific definitions   Wasim Khan (OSS)
• [PATCH] MAINTAINERS: remove SPEAR entry   Patrick Delaunay
  • [PATCH] MAINTAINERS: remove SPEAR entry   Bin Meng
  • [PATCH] MAINTAINERS: remove SPEAR entry   Tom Rini
• [PATCH] Taking over responsibility for GE boards from Sebastian   Martyn Welch
  • [PATCH] Taking over responsibility for GE boards from Sebastian   Sebastian Reichel
  • [PATCH] Taking over responsibility for GE boards from Sebastian   Tom Rini
• [PATCH] configs: Migrate CONFIG_ST_SMI to Kconfig   Patrick Delaunay
  • [PATCH] configs: Migrate CONFIG_ST_SMI to Kconfig   Tom Rini
    • [PATCH] configs: Migrate CONFIG_ST_SMI to Kconfig   Patrick DELAUNAY
• Status of the various RISC-V specification and policy   Atish Patra
  • Status of the various RISC-V specification and policy   Palmer Dabbelt
    • Status of the various RISC-V specification and policy   Mark Himelstein
      • Status of the various RISC-V specification and policy   Palmer Dabbelt
      • Status of the various RISC-V specification and policy   Atish Patra
      • Status of the various RISC-V specification and policy   Palmer Dabbelt
      • Status of the various RISC-V specification and policy   Atish Patra
      • Status of the various RISC-V specification and policy   Palmer Dabbelt
      • Status of the various RISC-V specification and policy   Mark Himelstein
      • Status of the various RISC-V specification and policy   Palmer Dabbelt
      • Status of the various RISC-V specification and policy   Mark Himelstein
      • Status of the various RISC-V specification and policy   Palmer Dabbelt
• [PATCH] mtd: remove SPEAr flash driver st_smi   Patrick Delaunay
  • [PATCH] mtd: remove SPEAr flash driver st_smi   Stefan Roese
  • [PATCH] mtd: remove SPEAr flash driver st_smi   Tom Rini
  • [PATCH] mtd: remove SPEAr flash driver st_smi   Tom Rini
• [PULL next] u-boot-at91-2022.01-a   Eugen.Hristev at microchip.com
  • [PULL next] u-boot-at91-2022.01-a   Tom Rini
• [PATCH 1/2] mmc: add helper to query max enhanced part size   Matthias Schiffer
  • [PATCH 2/2] cmd/mmc: add subcommand to query max enhanced partition size   Matthias Schiffer
    • [PATCH 2/2] cmd/mmc: add subcommand to query max enhanced partition size   Jaehoon Chung
  • [PATCH 1/2] mmc: add helper to query max enhanced part size   Jaehoon Chung
    • [PATCH 1/2] mmc: add helper to query max enhanced part size   Matthias Schiffer
• Please pull u-boot-x86   Bin Meng
  • Please pull u-boot-x86   Tom Rini
• [PATCH v4 0/2] mtd: spi: nor: force mtd name to "nor%d"   Patrick Delaunay
  • [PATCH v4 2/2] mtd: spi: nor: force mtd name to "nor%d"   Patrick Delaunay
    • [PATCH v4 2/2] mtd: spi: nor: force mtd name to "nor%d"   Tom Rini
  • [PATCH v4 0/2] mtd: spi: nor: force mtd name to "nor%d"   Marek Behún
    • [PATCH v4 0/2] mtd: spi: nor: force mtd name to "nor%d"   Marek Vasut
      • [PATCH v4 0/2] mtd: spi: nor: force mtd name to "nor%d"   Tom Rini
      • [PATCH v4 0/2] mtd: spi: nor: force mtd name to "nor%d"   Marek Behún
      • [PATCH v4 0/2] mtd: spi: nor: force mtd name to "nor%d"   Marek Vasut
      • [PATCH v4 0/2] mtd: spi: nor: force mtd name to "nor%d"   Marek Behún
      • [PATCH v4 0/2] mtd: spi: nor: force mtd name to "nor%d"   Tom Rini
      • [PATCH v4 0/2] mtd: spi: nor: force mtd name to "nor%d"   Marek Vasut
      • [PATCH v4 0/2] mtd: spi: nor: force mtd name to "nor%d"   Marek Vasut
      • [PATCH v4 0/2] mtd: spi: nor: force mtd name to "nor%d"   Tom Rini
      • [PATCH v4 0/2] mtd: spi: nor: force mtd name to "nor%d"   Tom Rini
      • [PATCH v4 0/2] mtd: spi: nor: force mtd name to "nor%d"   Tom Rini
      • [PATCH v4 0/2] mtd: spi: nor: force mtd name to "nor%d"   Marek Vasut
      • [PATCH v4 0/2] mtd: spi: nor: force mtd name to "nor%d"   Tom Rini
      • [PATCH v4 0/2] mtd: spi: nor: force mtd name to "nor%d"   Marek Vasut
      • [PATCH v4 0/2] mtd: spi: nor: force mtd name to "nor%d"   Patrick DELAUNAY
      • [PATCH v4 0/2] mtd: spi: nor: force mtd name to "nor%d"   Tom Rini
      • [PATCH v4 0/2] mtd: spi: nor: force mtd name to "nor%d"   Marek Behún
      • [PATCH v4 0/2] mtd: spi: nor: force mtd name to "nor%d"   Marek Vasut
      • [PATCH v4 0/2] mtd: spi: nor: force mtd name to "nor%d"   Marek Behún
      • [PATCH v4 0/2] mtd: spi: nor: force mtd name to "nor%d"   Marek Vasut
• [PATCH v4 1/2] mtd: cfi_flash: use cfi_flash_num_flash_banks only when supported   Patrick Delaunay
  • [PATCH v4 1/2] mtd: cfi_flash: use cfi_flash_num_flash_banks only when supported   Tom Rini
• [PATCH v3 1/2] Revert "kbuild: remove unused dtc-version.sh script"   Simon Glass
  • [PATCH v3 2/2] Makefile: Only build dtc if needed   Simon Glass
• [PATCH] Makefile: Allow LTO to be disabled for a build   Simon Glass
  • [PATCH] Makefile: Allow LTO to be disabled for a build   Marek Behún
    • [PATCH] Makefile: Allow LTO to be disabled for a build   Heinrich Schuchardt
      • [PATCH] Makefile: Allow LTO to be disabled for a build   Marek Behún
• [PATCH 01/14] rk3308: Remove unused NAND defines   Tom Rini
  • [PATCH 02/14] m53menlo: Switch to deriving CONFIG_SYS_NAND_PAGE_COUNT   Tom Rini
  • [PATCH 03/14] Convert CONFIG_NAND_LPC32XX_MLC to Kconfig   Tom Rini
  • [PATCH 04/14] Convert CONFIG_SPL_NAND_LOAD et al to Kconfig   Tom Rini
  • [PATCH 05/14] Convert CONFIG_SYS_NAND_PAGE_COUNT to Kconfig   Tom Rini
  • [PATCH 06/14] nand_spl_simple: Drop CONFIG_SYS_NAND_4_ADDR_CYCLE support   Tom Rini
  • [PATCH 07/14] Convert CONFIG_SYS_NAND_BAD_BLOCK_POS to Kconfig   Tom Rini
  • [PATCH 08/14] Convert CONFIG_SYS_NAND_5_ADDR_CYCLE to Kconfig   Tom Rini
  • [PATCH 09/14] Convert CONFIG_SYS_NAND_ONFI_DETECTION to Kconfig   Tom Rini
  • [PATCH 10/14] nand.h: Cleanup linux/mtd/rawnand.h usage   Tom Rini
  • [PATCH 11/14] Convert CONFIG_SYS_NAND_MAX_CHIPS to Kconfig   Tom Rini
  • [PATCH 12/14] Convert CONFIG_NAND_FSL_ELBC et al to Kconfig   Tom Rini
  • [PATCH 13/14] Convert CONFIG_SYS_NAND_U_BOOT_LOCATIONS et al to Kconfig   Tom Rini
  • [PATCH 14/14] Convert CONFIG_NAND_OMAP_ECCSCHEME to Kconfig   Tom Rini
• [PULL] u-boot-usb/master   Marek Vasut
  • [PULL] u-boot-usb/master   Tom Rini
• [PULL] u-boot-socfpga/master   Marek Vasut
  • [PULL] u-boot-socfpga/master   Tom Rini
• [PATCH] board: gateworks: venice: add imx8mn-gw7902 support   Tim Harvey
• USB 3.1 support   Aaron Williams
  • USB 3.1 support   Aaron Williams
    • USB 3.1 support   Bin Meng
• [PATCH 01/11] Remove #include <timestamp.h> from files which do not need it   Tom Rini
• [PATCH 02/11] Remove #include <version.h> from files which do not need it   Tom Rini
• [PATCH 03/11] efi_loader: Use directly version_string variable   Tom Rini
• [PATCH 04/11] version: Move version_string[] from version.h to version_string.h   Tom Rini
• [PATCH 05/11] m68k: mcf: Remove overloading version_string   Tom Rini
• [PATCH 08/11] version: Do not make version_string[] variable as a weak   Tom Rini
• [PATCH 09/11] x86: quark: MRC: Remove U_BOOT_DATE and U_BOOT_TIME from debug log   Tom Rini
• [PATCH 10/11] version: Remove global macro U_BOOT_VERSION_STRING from version.h   Tom Rini
• [PATCH 11/11] Remove including timestamp.h in version.h   Tom Rini
• [PATCH 01/11] dtoc: Further improve documentation about warnings   Tom Rini
• [PATCH 02/11] sandbox: Correct handling of --rm_memory   Tom Rini
• [PATCH 03/11] sandbox: Add license headers to the dts files   Tom Rini
• [PATCH 04/11] btrfs: Suppress the message about missing filesystem   Tom Rini
• [PATCH 05/11] sqfs: Suppress the message about missing filesystem   Tom Rini
• [PATCH 06/11] test: Tidy a comment in the bloblist test   Tom Rini
• [PATCH 07/11] dm: core: Fix a few incorrect comments on first/next functions   Tom Rini
• [PATCH 08/11] sandbox: Add a way to find the size of a file   Tom Rini
• [PATCH 09/11] sandbox: Add a way to map a file into memory   Tom Rini
  • [PATCH 09/11] sandbox: Add a way to map a file into memory   Simon Glass
• [PATCH 11/11] test: Add a way to skip console checking until a string matches   Tom Rini
• [PATCH 1/1] riscv: ae350: enable Coherence Manager for ae350   Leo Yu-Chi Liang
  • [PATCH 1/1] riscv: ae350: enable Coherence Manager for ae350   Rick Chen
• [PATCH] usb: mtu3: flush cache for the first GPD when allocate GPD ring   Chunfeng Yun
  • [PATCH] usb: mtu3: flush cache for the first GPD when allocate GPD ring   Marek Vasut
• [PATCH] ARM: dts: colibri-imx6ull: fix mac address passing   Francesco Dolcini
  • [PATCH] ARM: dts: colibri-imx6ull: fix mac address passing   Tom Rini
    • [PATCH] ARM: dts: colibri-imx6ull: fix mac address passing   Francesco Dolcini
      • [PATCH] ARM: dts: colibri-imx6ull: fix mac address passing   Tom Rini
• [PATCH] rtc: rv8803: add epson,rx8803 and epson,rx8900 compatible   Heiko Thiery
  • [PATCH] rtc: rv8803: add epson, rx8803 and epson, rx8900 compatible   Michael Walle
• [PATCH] arm: a37xx: pci: Increase PCIe IO size from 64 KiB to 1 MiB   Pali Rohár
  • [PATCH] arm: a37xx: pci: Increase PCIe IO size from 64 KiB to 1 MiB   Stefan Roese
• [PATCH 1/1] doc: add system reset to API documentation   Heinrich Schuchardt
  • [PATCH 1/1] doc: add system reset to API documentation   Simon Glass
  • [PATCH 1/1] doc: add system reset to API documentation   Alexandre Ghiti
    • [PATCH 1/1] doc: add system reset to API documentation   Sean Anderson
      • [PATCH 1/1] doc: add system reset to API documentation   Heinrich Schuchardt
• [PATCH v2] rtc: rv8803: add epson,rx8803 and epson,rx8900 compatible   Heiko Thiery
• SPL_DM and SPL 4K   Oleh Kravchenko
• [PATCH] Makelfile: clean target should remove itb*   Heinrich Schuchardt
  • [PATCH] Makelfile: clean target should remove itb*   Bin Meng
• u-boot.nand oob size   Ivan Riabtsov
• uboot oob size   Ivan Riabtsov
• [RFC v2 0/2] mtd: Support slc-mode for Toshiba TC58TEG5DCLTA00   Chris Morgan
  • [RFC v2 1/2] mtd: Add support for Linux slc-mode for MLC NAND   Chris Morgan
  • [RFC v2 2/2] mtd: Add pairing info for Toshiba TC58TEG5DCLTA00 NAND   Chris Morgan
• [PATCH 0/1] mx7ulp: Update wdog disable sequence   Oleksandr Suvorov
  • [PATCH 1/1] mx7ulp: Update wdog disable sequence   Oleksandr Suvorov
• Of capsules, signatures and device trees, TGTBTU   François Ozog
• [PATCH 00/10] dra7: bring up and support IPU load/start   Amjad Ouled-Ameur
  • [PATCH 01/10] reset: dra7: Add a reset driver   Amjad Ouled-Ameur
  • [PATCH 02/10] arm: mach-omap2: load/start remoteproc IPU1/IPU2   Amjad Ouled-Ameur
  • [PATCH 03/10] drivers: misc: Makefile: Enable fs_loader compilation at SPL Level   Amjad Ouled-Ameur
  • [PATCH 04/10] linux: bitmap.h: Add find_next_zero_area function   Amjad Ouled-Ameur
  • [PATCH 05/10] remoteproc: uclass: Add remoteproc resource handling helpers   Amjad Ouled-Ameur
    • [PATCH 05/10] remoteproc: uclass: Add remoteproc resource handling helpers   Simon Glass
  • [PATCH 06/10] remoteproc: ipu: Add driver to bring up ipu   Amjad Ouled-Ameur
  • [PATCH 07/10] dts: dra7-ipu-common-early-boot.dtsi: Add all the ipu early boot related nodes   Amjad Ouled-Ameur
  • [PATCH 08/10] arm: dts: dra7: Add ipu and related nodes   Amjad Ouled-Ameur
  • [PATCH 09/10] arm: dts: dra7*/am57xx-idk-evm-u-boot: Add ipu early boot DT changes   Amjad Ouled-Ameur
  • [PATCH 10/10] dts: am57xx*: Add ipu early boot DT changes   Amjad Ouled-Ameur
• [PATCH 0/6] Add support for SDM845 based boards, and SM-G9600   dsankouski at gmail.com
  • [PATCH 1/6 v3] serial: qcom: add support for GENI serial driver   dsankouski at gmail.com
  • [PATCH 2/6 v3] spmi: msm: add arbiter version 5 support   dsankouski at gmail.com
  • [PATCH 3/6] pinctrl: qcom: add pinctrl and gpio drivers for SDM845 SoC   dsankouski at gmail.com
    • [PATCH 3/6] pinctrl: qcom: add pinctrl and gpio drivers for SDM845 SoC   Stephan Gerhold
  • [PATCH 4/6] clocks: qcom: add clocks for SDM845 debug uart   dsankouski at gmail.com
  • [PATCH 5/6] SoC: qcom: add support for SDM845   dsankouski at gmail.com
    • [PATCH 5/6] SoC: qcom: add support for SDM845   Stephan Gerhold
  • [PATCH 6/6 v3] board: samsung: add Samsung Galaxy S9/S9+(SM-G96x0) board   dsankouski at gmail.com
    • [PATCH 6/6 v3] board: samsung: add Samsung Galaxy S9/S9+(SM-G96x0) board   Stephan Gerhold
      • [PATCH 6/6 v3] board: samsung: add Samsung Galaxy S9/S9+(SM-G96x0) board   Dzmitry Sankouski
      • [PATCH 6/6 v3] board: samsung: add Samsung Galaxy S9/S9+(SM-G96x0) board   Stephan Gerhold
• [PATCH] ARM: dts: imx: use generic name bus   Oleksandr Suvorov
  • [PATCH] ARM: dts: imx: use generic name bus   Peng Fan (OSS)
• [RFC PATCH 1/4] Revert "nvme: Correct the prps per page calculation method"   Stefan Agner
  • [RFC PATCH 3/4] nvme: Use pointer for CPU addressed buffers   Stefan Agner
  • [RFC PATCH 4/4] nvme: translate virtual addresses into the bus's address space   Stefan Agner
    • [RFC PATCH 4/4] nvme: translate virtual addresses into the bus's address space   Stefan Agner
• [RFC PATCH 2/4] nvme: improve readability of nvme_setup_prps()   Stefan Agner
• [PATCH] cmd: mmc: check whether card is SD or eMMC before hwpartition   Jaehoon Chung
  • [PATCH] cmd: mmc: check whether card is SD or eMMC before hwpartition   Peng Fan (OSS)
• [PATCH] env: Make _init() expect _INVALID when _IS_NOWHERE   Tom Rini
  • [PATCH] env: Make _init() expect _INVALID when _IS_NOWHERE   Marek Vasut
    • [PATCH] env: Make _init() expect _INVALID when _IS_NOWHERE   Tom Rini
• [PATCH 1/2] armv8/cache.S: Read sysreg fields through ubfx   Tom Rini
• [PATCH 2/2] armv8/cache.S: Triple with single instruction   Tom Rini
• [PATCH] crc32: Add crc32 implementation using __builtin_aarch64_crc32b   Tom Rini
• [PATCH] image: add lz4 zstd compression magic map   Tom Rini
• [PATCH v2 0/4] Add reset support to HiFive Unmatched   Alexandre Ghiti
  • [PATCH v2 1/4] dt-bindings: power: Add da9063 PMIC device bindings   Alexandre Ghiti
  • [PATCH v2 2/4] dt-bindings: power: Add new da9063 sysreset subdevice bindings   Alexandre Ghiti
  • [PATCH v2 3/4] drivers: pmic: Add sysreset driver for da9063 PMIC   Alexandre Ghiti
  • [PATCH v2 4/4] riscv: Enable da9063 sysreset driver on HiFive Unmatched   Alexandre Ghiti
• [PATCH] arm64: zynqmp: Define all eeproms for SC on vck190   Michal Simek
• [PATCH] arm64: zynqmp: Add psu_init_gpl for vck190/vmk180 SC   Michal Simek
• [PATCH 1/1 RFC] treewide: Deprecate OF_PRIOR_STAGE   Ilias Apalodimas
  • [PATCH 1/1 RFC] treewide: Deprecate OF_PRIOR_STAGE   Ilias Apalodimas
    • [PATCH 1/1 RFC] treewide: Deprecate OF_PRIOR_STAGE   Mark Kettenis
      • [PATCH 1/1 RFC] treewide: Deprecate OF_PRIOR_STAGE   Ilias Apalodimas
      • [PATCH 1/1 RFC] treewide: Deprecate OF_PRIOR_STAGE   Simon Glass
  • [PATCH 1/1 RFC] treewide: Deprecate OF_PRIOR_STAGE   Simon Glass
    • [PATCH 1/1 RFC] treewide: Deprecate OF_PRIOR_STAGE   Ilias Apalodimas
      • [PATCH 1/1 RFC] treewide: Deprecate OF_PRIOR_STAGE   Simon Glass
    • [PATCH 1/1 RFC] treewide: Deprecate OF_PRIOR_STAGE   Mark Kettenis
      • [PATCH 1/1 RFC] treewide: Deprecate OF_PRIOR_STAGE   Simon Glass
  • [PATCH 1/1 RFC] treewide: Deprecate OF_PRIOR_STAGE   Heinrich Schuchardt
    • [PATCH 1/1 RFC] treewide: Deprecate OF_PRIOR_STAGE   Ilias Apalodimas
• [PATCH 1/3] phy: marvell: a3700: Set TXDCLK_2X_SEL bit during PCIe initialization   Pali Rohár
  • [PATCH 1/3] phy: marvell: a3700: Set TXDCLK_2X_SEL bit during PCIe initialization   Stefan Roese
    • [PATCH 1/3] phy: marvell: a3700: Set TXDCLK_2X_SEL bit during PCIe initialization   Pali Rohár
• [PATCH 2/3] phy: marvell: a3700: Fix configuring polarity invert bits   Pali Rohár
  • [PATCH 2/3] phy: marvell: a3700: Fix configuring polarity invert bits   Stefan Roese
• [PATCH 3/3] phy: marvell: a3700: Return correct error code when power up fails   Pali Rohár
  • [PATCH 3/3] phy: marvell: a3700: Return correct error code when power up fails   Stefan Roese
• [PATCH v3 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Pali Rohár
  • [PATCH v3 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support   Luka Kovacic
• [PATCH u-boot-marvell 0/9] a38x serdes cleanup   Marek Behún
  • [PATCH u-boot-marvell 1/9] arm: mvebu: a38x: serdes: Add comments and use macros in PCIe code   Marek Behún
  • [PATCH u-boot-marvell 2/9] arm: mvebu: a38x: serdes: Remove duplicate macro SOC_CTRL_REG   Marek Behún
  • [PATCH u-boot-marvell 3/9] arm: mvebu: a38x: serdes: Add comments for hws_pex_config() code   Marek Behún
  • [PATCH u-boot-marvell 4/9] arm: mvebu: a38x: serdes: Don't overwrite read-only SAR PCIe registers   Marek Behún
  • [PATCH u-boot-marvell 5/9] arm: mvebu: a38x: serdes: Don't set PCIe Common Clock Configuration   Marek Behún
  • [PATCH u-boot-marvell 6/9] arm: mvebu: a38x: serdes: Don't overwrite PCI device ID   Marek Behún
  • [PATCH u-boot-marvell 7/9] arm: mvebu: a38x: serdes: Don't configure PCIe cards in SerDes init code   Marek Behún
  • [PATCH u-boot-marvell 8/9] arm: mvebu: a38x: serdes: Remove unused PCIe macros and functions   Marek Behún
  • [PATCH u-boot-marvell 9/9] arm: mvebu: a38x: serdes: Update comment about PCIE*_ENABLE_* defines   Marek Behún
• [PATCH u-boot-marvell v3 00/39] kwboot higher baudrate   Marek Behún
  • [PATCH u-boot-marvell v3 01/39] tools: kwbimage: Fix printf format warning   Marek Behún
  • [PATCH u-boot-marvell v3 02/39] tools: kwboot: Fix buffer overflow in kwboot_terminal()   Marek Behún
  • [PATCH u-boot-marvell v3 03/39] tools: kwboot: Make the quit sequence buffer const   Marek Behún
  • [PATCH u-boot-marvell v3 04/39] tools: kwboot: Refactor and fix writing buffer   Marek Behún
  • [PATCH u-boot-marvell v3 05/39] tools: kwboot: Print version information header   Marek Behún
  • [PATCH u-boot-marvell v3 06/39] tools: kwboot: Fix kwboot_xm_sendblock() function when kwboot_tty_recv() fails   Marek Behún
  • [PATCH u-boot-marvell v3 07/39] tools: kwboot: Fix return type of kwboot_xm_makeblock() function   Marek Behún
  • [PATCH u-boot-marvell v3 08/39] tools: kwboot: Fix comparison of integers with different size   Marek Behún
  • [PATCH u-boot-marvell v3 09/39] tools: kwboot: Fix printing progress   Marek Behún
  • [PATCH u-boot-marvell v3 10/39] tools: kwboot: Print newline on error when progress was not completed   Marek Behún
  • [PATCH u-boot-marvell v3 11/39] tools: kwboot: Split sending image into header and data stages   Marek Behún
  • [PATCH u-boot-marvell v3 12/39] tools: kwboot: Use a function to check whether received byte is a Xmodem reply   Marek Behún
  • [PATCH u-boot-marvell v3 13/39] tools: kwboot: Allow non-xmodem text output from BootROM only in a specific case   Marek Behún
  • [PATCH u-boot-marvell v3 14/39] tools: kwboot: Print new line after SPL output   Marek Behún
  • [PATCH u-boot-marvell v3 15/39] tools: kwboot: Allow greater timeout when executing header code   Marek Behún
  • [PATCH u-boot-marvell v3 16/39] tools: kwboot: Prevent waiting indefinitely if no xmodem reply is received   Marek Behún
  • [PATCH u-boot-marvell v3 17/39] tools: kwboot: Properly finish xmodem transfer   Marek Behún
  • [PATCH u-boot-marvell v3 18/39] tools: kwboot: Always call kwboot_img_patch_hdr()   Marek Behún
  • [PATCH u-boot-marvell v3 20/39] tools: kwboot: Don't patch image header if signed   Marek Behún
  • [PATCH u-boot-marvell v3 21/39] tools: kwboot: Patch source address in image header   Marek Behún
  • [PATCH u-boot-marvell v3 22/39] tools: kwboot: Patch destination address to DDR area for SPI image   Marek Behún
  • [PATCH u-boot-marvell v3 23/39] tools: kwbimage: Refactor image_version()   Marek Behún
  • [PATCH u-boot-marvell v3 24/39] tools: kwbimage: Refactor kwbimage header size determination   Marek Behún
  • [PATCH u-boot-marvell v3 25/39] tools: kwbimage: Update comments describing kwbimage v1 structures   Marek Behún
  • [PATCH u-boot-marvell v3 26/39] tools: kwboot: Round up header size to 128 B when patching   Marek Behún
  • [PATCH u-boot-marvell v3 27/39] tools: kwboot: Explicitly check against size of struct main_hdr_v1   Marek Behún
  • [PATCH u-boot-marvell v3 28/39] tools: kwboot: Support higher baudrates when booting via UART   Marek Behún
  • [PATCH u-boot-marvell v3 29/39] tools: kwboot: Allow any baudrate on Linux   Marek Behún
  • [PATCH u-boot-marvell v3 30/39] tools: kwboot: Check whether baudrate was set to requested value   Marek Behún
  • [PATCH u-boot-marvell v3 31/39] tools: kwboot: Fix initializing tty device   Marek Behún
  • [PATCH u-boot-marvell v3 32/39] tools: kwboot: Disable tty interbyte timeout   Marek Behún
  • [PATCH u-boot-marvell v3 33/39] tools: kwboot: Disable non-blocking mode   Marek Behún
  • [PATCH u-boot-marvell v3 34/39] tools: kwboot: Cosmetic fix   Marek Behún
  • [PATCH u-boot-marvell v3 35/39] tools: kwboot: Avoid code repetition in kwboot_img_patch()   Marek Behún
  • [PATCH u-boot-marvell v3 36/39] tools: kwboot: Update file header   Marek Behún
  • [PATCH u-boot-marvell v3 37/39] tools: kwboot: Add Pali and Marek as authors   Marek Behún
  • [PATCH u-boot-marvell v3 38/39] doc/kwboot.1: Update man page   Marek Behún
  • [PATCH u-boot-marvell v3 19/39] tools: kwbimage: Simplify iteration over version 1 optional headers   Marek Behún
  • [PATCH u-boot-marvell v3 39/39] MAINTAINERS: Add entry for kwbimage / kwboot tools   Marek Behún
  • [PATCH u-boot-marvell v3 00/39] kwboot higher baudrate   Pali Rohár
• about mtd erase fix series   Marek Behún
  • about mtd erase fix series   Tom Rini
    • about mtd erase fix series   Marek Behún
• [PATCH v2 00/39] efi: Improvements to U-Boot running on top of UEFI   Simon Glass
  • [PATCH v2 01/39] RFC: efi: Drop code that doesn't work with driver model   Simon Glass
  • [PATCH v2 02/39] efi: Add a separate maintainer entry for the app   Simon Glass
  • [PATCH v2 03/39] x86: Keep symbol information in u-boot ELF file   Simon Glass
  • [PATCH v2 04/39] x86: Create a new header for EFI   Simon Glass
  • [PATCH v2 05/39] x86: Show some EFI info with the bdinfo command   Simon Glass
  • [PATCH v2 06/39] x86: Tidy up global_data pointer for 64-bit   Simon Glass
  • [PATCH v2 07/39] efi: Add a script for building and testing U-Boot on UEFI   Simon Glass
  • [PATCH v2 08/39] efi: Enable DM_ETH for the app   Simon Glass
  • [PATCH v2 09/39] efi: Drop the OF_EMBED warning for EFI   Simon Glass
  • [PATCH v2 10/39] x86: Create a 32/64-bit selection for the app   Simon Glass
  • [PATCH v2 11/39] efi: Create a 64-bit app   Simon Glass
  • [PATCH v2 12/39] x86: Don't duplicate global_ptr in 64-bit EFI app   Simon Glass
  • [PATCH v2 13/39] efi: Add a way to obtain boot services in the app   Simon Glass
  • [PATCH v2 14/39] efi: Add video support to the app   Simon Glass
  • [PATCH v2 15/39] efi: Add EFI uclass for media   Simon Glass
  • [PATCH v2 16/39] efi: Add a media/block driver for EFI block devices   Simon Glass
  • [PATCH v2 17/39] efi: Locate all block devices in the app   Simon Glass
  • [PATCH v2 18/39] patman: Use a ValueError exception if tools.Run() fails   Simon Glass
  • [PATCH v2 19/39] binman: Report an error if test files fail to compile   Simon Glass
  • [PATCH v2 20/39] binman: Support reading the offset of an ELF-file symbol   Simon Glass
  • [PATCH v2 21/39] binman: Allow timeout to occur in the image or its section   Simon Glass
  • [PATCH v2 22/39] binman: Tidy up comments on _DoTestFile()   Simon Glass
  • [PATCH v2 23/39] binman: Support updating the dtb in an ELF file   Simon Glass
  • [PATCH v2 24/39] efi: serial: Support arrow keys   Simon Glass
  • [PATCH v2 25/39] bloblist: Support allocating the bloblist   Simon Glass
  • [PATCH v2 26/39] x86: Allow booting a kernel from the EFI app   Simon Glass
  • [PATCH v2 27/39] x86: Don't process the kernel command line unless enabled   Simon Glass
  • [PATCH v2 28/39] x86: efi: Add room for the binman definition in the dtb   Simon Glass
  • [PATCH v2 29/39] efi: Add comments to struct efi_priv   Simon Glass
  • [PATCH v2 30/39] efi: Fix ll_boot_init() operation with the app   Simon Glass
  • [PATCH v2 32/39] efi: Share struct efi_priv between the app and stub code   Simon Glass
  • [PATCH v2 33/39] efi: Move exit_boot_services into a function   Simon Glass
  • [PATCH v2 34/39] efi: Check for failure when initing the app   Simon Glass
  • [PATCH v2 35/39] efi: Mention that efi_info_get() is only used in the stub   Simon Glass
  • [PATCH v2 36/39] efi: Show when allocated pages are used   Simon Glass
  • [PATCH v2 37/39] efi: Allow easy selection of serial-only operation   Simon Glass
  • [PATCH v2 38/39] efi: Update efi_get_next_mem_desc() to avoid needing a map   Simon Glass
  • [PATCH v2 39/39] efi: Support the efi command in the app   Simon Glass
• [PATCH u-boot-marvell] arm: mvebu: turris_omnia: fix leaked mtd device   Marek Behún
  • [PATCH u-boot-marvell] arm: mvebu: turris_omnia: fix leaked mtd device   Pali Rohár
    • [PATCH u-boot-marvell] arm: mvebu: turris_omnia: fix leaked mtd device   Stefan Roese
  • [PATCH u-boot-marvell] arm: mvebu: turris_omnia: fix leaked mtd device   Stefan Roese
  • [PATCH u-boot-marvell] arm: mvebu: turris_omnia: fix leaked mtd device   Stefan Roese
• [PATCH] board: rpi: always set fdt_addr if provided by firmware   Oleksandr Suvorov
  • [PATCH] board: rpi: always set fdt_addr if provided by firmware   Matthias Brugger
    • [PATCH] board: rpi: always set fdt_addr if provided by firmware   Oleksandr Suvorov
• [RFC PATCH] RFC: Replace CONFIG_SYS_BAUDRATE_TABLE by board and UART driver rounding functions   Pali Rohár
  • [RFC PATCH] RFC: Replace CONFIG_SYS_BAUDRATE_TABLE by board and UART driver rounding functions   Tom Rini
    • [RFC PATCH] RFC: Replace CONFIG_SYS_BAUDRATE_TABLE by board and UART driver rounding functions   Pali Rohár
• [PATCH v4 00/15] image: A partial series for the image clean-up   Simon Glass
  • [PATCH v4 01/15] lib: Add memdup()   Simon Glass
  • [PATCH v4 02/15] Add support for an owned buffer   Simon Glass
  • [PATCH v4 03/15] compiler: Add a comment to host_build()   Simon Glass
  • [PATCH v4 04/15] zstd: Create a function for use from U-Boot   Simon Glass
  • [PATCH v4 05/15] btrfs: Use U-Boot API for decompression   Simon Glass
  • [PATCH v4 06/15] image: Avoid switch default in image_decomp()   Simon Glass
  • [PATCH v4 07/15] image: Update zstd to avoid reporting error twice   Simon Glass
  • [PATCH v4 08/15] gzip: Avoid use of u64   Simon Glass
  • [PATCH v4 09/15] image: Update image_decomp() to avoid ifdefs   Simon Glass
  • [PATCH v4 10/15] image: Split board code out into its own file   Simon Glass
  • [PATCH v4 11/15] image: Fix up checkpatch warnings in image-board.c   Simon Glass
  • [PATCH v4 12/15] image: Split host code out into its own file   Simon Glass
  • [PATCH v4 13/15] image: Create a function to do manual relocation   Simon Glass
  • [PATCH v4 14/15] image: Avoid #ifdefs for manual relocation   Simon Glass
  • [PATCH v4 15/15] image: Remove ifdefs around image_setup_linux() el at   Simon Glass
• [PATCH] ARM: vexpress_ca9x4: Correct missing SYS_LOAD_ADDR   Simon Glass
  • [PATCH] ARM: vexpress_ca9x4: Correct missing SYS_LOAD_ADDR   Tom Rini
    • [PATCH] ARM: vexpress_ca9x4: Correct missing SYS_LOAD_ADDR   Simon Glass
• [PATCH] arm: spl: flush and disable cache before jumping to OPTEE   Oleksandr Suvorov
  • [PATCH] arm: spl: flush and disable cache before jumping to OPTEE   Peng Fan (OSS)
• [PATCH V2] configs: omap3x_logic: Enable LTO on more LogicPD OMAP3 boards   Adam Ford
• [PATCH 1/3] Add fdt network helper header file   Simon Glass
• [PATCH] imx: syscounter: allow timer_init for SPL build   Oleksandr Suvorov
  • [PATCH] imx: syscounter: allow timer_init for SPL build   Peng Fan (OSS)
• [PATCH v3 2/3] arm: Add an __image_copy_start symbol for ARMv8   Simon Glass
  • [PATCH v3 2/3] arm: Add an __image_copy_start symbol for ARMv8   Scott Wood
    • [PATCH v3 2/3] arm: Add an __image_copy_start symbol for ARMv8   Simon Glass
• [PATCH] misc: ocotp: Allow disabling ocotp driver in SPL   Oleksandr Suvorov
  • [PATCH] misc: ocotp: Allow disabling ocotp driver in SPL   Peng Fan (OSS)
• [PATCH u-boot-spi v2 0/9] Fix `mtd erase` when used with mtdpart   Marek Behún
  • [PATCH u-boot-spi v2 2/9] mtd: spi-nor-core: Check return value of write_enable() in spi_nor_erase()   Marek Behún
    • [PATCH u-boot-spi v2 2/9] mtd: spi-nor-core: Check return value of write_enable() in spi_nor_erase()   Pratyush Yadav
  • [PATCH u-boot-spi v2 3/9] mtd: spi-nor-core: Don't overwrite return value if it is non-zero   Marek Behún
  • [PATCH u-boot-spi v2 4/9] mtd: spi-nor-core: Check return value of write_disable() in spi_nor_erase()   Marek Behún
  • [PATCH u-boot-spi v2 5/9] mtd: spi-nor-core: Don't check for zero length in spi_nor_erase()   Marek Behún
    • [PATCH u-boot-spi v2 5/9] mtd: spi-nor-core: Don't check for zero length in spi_nor_erase()   Pratyush Yadav
  • [PATCH u-boot-spi v2 6/9] mtd: spi-nor-core: Call mtd_erase_callback() from spi_nor_erase()   Marek Behún
  • [PATCH u-boot-spi v2 7/9] mtd: spi-nor-core: Check for ctrlc() in spi_nor_erase()   Marek Behún
  • [PATCH u-boot-spi v2 8/9] mtd: mtdpart: Make mtdpart's _erase method sane   Marek Behún
  • [PATCH u-boot-spi v2 9/9] mtd: Remove mtd_erase_callback() entirely   Marek Behún
• [PATCH u-boot-spi v2 1/9] mtd: spi-nor-core: Try cleaning up in case writing BAR failed   Marek Behún
  • [PATCH u-boot-spi v2 1/9] mtd: spi-nor-core: Try cleaning up in case writing BAR failed   Pratyush Yadav
• [PATCH u-boot-marvell 0/6] A3720 PCIe enhancements   Marek Behún
  • [PATCH u-boot-marvell 1/6] arm: a37xx: pci: Fix pcie_advk_link_up()   Marek Behún
  • [PATCH u-boot-marvell 2/6] arm: a37xx: pci: Add support for accessing PCI Bridge on root bus   Marek Behún
  • [PATCH u-boot-marvell 3/6] arm: a37xx: pci: Do not automatically enable bus mastering on PCI Bridge   Marek Behún
  • [PATCH u-boot-marvell 4/6] arm: a37xx: pci: Handle propagation of CRSSVE bit from PCIe Root Port   Marek Behún
  • [PATCH u-boot-marvell 5/6] arm: a37xx: pci: Cosmetic change   Marek Behún
  • [PATCH u-boot-marvell 6/6] arm: a37xx: pci: Update private structure documentation   Marek Behún
    • [PATCH u-boot-marvell 6/6] arm: a37xx: pci: Update private structure documentation   Pali Rohár
• [PATCH v2 0/4] 30bpp framebuffer support   Mark Kettenis
  • [PATCH v2 1/4] video: Add 30bpp support   Mark Kettenis
  • [PATCH v2 2/4] efi_loader: GOP: Add 30bpp support   Mark Kettenis
  • [PATCH v2 3/4] video: simplefb: Add 30bpp support   Mark Kettenis
  • [PATCH v2 4/4] efi_loader: GOP: Fix 30bpp block transfer support   Mark Kettenis
    • [PATCH v2 4/4] efi_loader: GOP: Fix 30bpp block transfer support   Heinrich Schuchardt
• [PATCH u-boot-marvell v2 0/6] A3720 PCIe enhancements   Marek Behún
  • [PATCH u-boot-marvell v2 1/6] arm: a37xx: pci: Fix pcie_advk_link_up()   Marek Behún
  • [PATCH u-boot-marvell v2 2/6] arm: a37xx: pci: Add support for accessing PCI Bridge on root bus   Marek Behún
  • [PATCH u-boot-marvell v2 3/6] arm: a37xx: pci: Do not automatically enable bus mastering on PCI Bridge   Marek Behún
  • [PATCH u-boot-marvell v2 4/6] arm: a37xx: pci: Handle propagation of CRSSVE bit from PCIe Root Port   Marek Behún
  • [PATCH u-boot-marvell v2 5/6] arm: a37xx: pci: Cosmetic change   Marek Behún
  • [PATCH u-boot-marvell v2 6/6] arm: a37xx: pci: Update private structure documentation   Marek Behún
• [PATCH v5 00/29] image: Reduce #ifdefs and ad-hoc defines in image code (Part B)   Simon Glass
  • [PATCH v5 01/29] compiler: Rename host_build() to tools_build()   Simon Glass
  • [PATCH v5 02/29] kconfig: Add tools support to CONFIG_IS_ENABLED()   Simon Glass
    • [PATCH v5 02/29] kconfig: Add tools support to CONFIG_IS_ENABLED()   Alex G.
      • [PATCH v5 02/29] kconfig: Add tools support to CONFIG_IS_ENABLED()   Masahiro Yamada
      • [PATCH v5 02/29] kconfig: Add tools support to CONFIG_IS_ENABLED()   Simon Glass
      • [PATCH v5 02/29] kconfig: Add tools support to CONFIG_IS_ENABLED()   Simon Glass
  • [PATCH v5 03/29] image: Add Kconfig options for FIT in the tools build   Simon Glass
  • [PATCH v5 04/29] spl: cypto: Bring back SPL_ versions of SHA   Simon Glass
  • [PATCH v5 05/29] hash: Use Kconfig to enable hashing in host tools and SPL   Simon Glass
    • [PATCH v5 05/29] hash: Use Kconfig to enable hashing in host tools and SPL   Alex G.
      • [PATCH v5 05/29] hash: Use Kconfig to enable hashing in host tools and SPL   Simon Glass
      • [PATCH v5 05/29] hash: Use Kconfig to enable hashing in host tools and SPL   Alex G.
  • [PATCH v5 06/29] hash: Drop some #ifdefs in hash.c   Simon Glass
  • [PATCH v5 07/29] image: Drop IMAGE_ENABLE_FIT   Simon Glass
  • [PATCH v5 08/29] image: Drop IMAGE_ENABLE_OF_LIBFDT   Simon Glass
  • [PATCH v5 09/29] image: Use Kconfig to enable CONFIG_FIT_VERBOSE on host   Simon Glass
  • [PATCH v5 10/29] image: Use Kconfig to enable FIT_RSASSA_PSS on host   Simon Glass
  • [PATCH v5 11/29] image: Use the correct checks for CRC32   Simon Glass
  • [PATCH v5 12/29] image: Drop IMAGE_BOOT_GET_CMDLINE   Simon Glass
  • [PATCH v5 13/29] image: Drop IMAGE_OF_BOARD_SETUP   Simon Glass
  • [PATCH v5 14/29] image: Drop IMAGE_OF_SYSTEM_SETUP   Simon Glass
  • [PATCH v5 15/29] image: Drop IMAGE_ENABLE_IGNORE   Simon Glass
  • [PATCH v5 16/29] efi: Correct dependency on FIT_SIGNATURE   Simon Glass
  • [PATCH v5 19/29] image: Tidy up fit_unsupported_reset()   Simon Glass
  • [PATCH v5 20/29] image: Drop unnecessary #ifdefs from image.h   Simon Glass
  • [PATCH v5 21/29] image: Drop #ifdefs for fit_print_contents()   Simon Glass
  • [PATCH v5 22/29] image: Drop most #ifdefs in image-board.c   Simon Glass
  • [PATCH v5 23/29] image: Reduce variable scope in boot_get_ramdisk()   Simon Glass
  • [PATCH v5 24/29] image: Split up boot_get_ramdisk()   Simon Glass
  • [PATCH v5 25/29] image: Remove #ifdefs from select_ramdisk()   Simon Glass
  • [PATCH v5 26/29] image: Remove some #ifdefs from image-fit and image-fit-sig   Simon Glass
  • [PATCH v5 27/29] image: Reduce variable scope in boot_get_fdt()   Simon Glass
  • [PATCH v5 28/29] image: Split up boot_get_fdt()   Simon Glass
• Pull request for efi-2021-10-rc5   Heinrich Schuchardt
  • Pull request for efi-2021-10-rc5   Tom Rini
• [PATCH] nvme: Enable FUA   Jon Lin
  • [PATCH] nvme: Enable FUA   Stefan Agner
    • [PATCH] nvme: Enable FUA   Jon Lin
• [PATCH 0/3] Add am33xx/am43xx spread spectrum clock support   Dario Binacchi
  • [PATCH 1/3] ARM: dts: am33xx-clocks: add spread spectrum support   Dario Binacchi
  • [PATCH 2/3] ARM: dts: am43xx-clocks: add spread spectrum support   Dario Binacchi
  • [PATCH 3/3] clk: ti: add am33xx/am43xx spread spectrum clock support   Dario Binacchi
• [PATCH v1] clk: rockchip: rk3568: update clks   Elaine Zhang
• [PATCH v3 1/2] arm: dts: imx8mq: Add Kontron pitx-imx8m   Heiko Thiery
  • [PATCH v3 2/2] board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support   Heiko Thiery
• DM_VIDEO migration   Simon Glass
  • DM_VIDEO migration   Tom Rini
    • DM_VIDEO migration   Simon Glass
      • DM_VIDEO migration   Tom Rini
  • DM_VIDEO migration   Anatolij Gustschin
    • DM_VIDEO migration   Tom Rini
• Radax failed to boot - how to recover the board.   Anand Moon
• [PATCH 3/6 v2] pinctrl: qcom: add pinctrl and gpio drivers for SDM845 SoC   dsankouski at gmail.com
  • [PATCH 5/6 v2] SoC: qcom: add support for SDM845   dsankouski at gmail.com
• [PATCH v2] fs: fat: check for buffer size before reading blocks   Oleksandr Suvorov
• [PATCH 12/12] dm: gpio: Add of-platdata support   Simon Glass
• [PATCH 11/12] irq: Tidy up of-platdata irq support   Simon Glass
• [PATCH 10/12] dm: doc: Add a note about of-platdata header files   Simon Glass
• [PATCH 08/12] dm: Add comments to dt-structs contents   Simon Glass
• [PATCH 09/12] clk: Rename clk_get_by_driver_info()   Simon Glass
• [PATCH 07/12] fdt: Update Makefile rules with the new OF_REAL Kconfig   Simon Glass
• [PATCH 06/12] treewide: Try to avoid the preprocessor with OF_REAL   Simon Glass
• [PATCH 05/12] mmc: nds32: ftsdc010: Convert to livetree   Simon Glass
• [PATCH 04/12] treewide: Use OF_REAL instead of !OF_PLATDATA   Simon Glass
• [PATCH 03/12] treewide: Simply conditions with the new OF_REAL   Simon Glass
• [PATCH 01/12] treewide: fdt: Move fdt_get_config_... to ofnode_conf_read...   Simon Glass
• [PATCH 02/12] fdt: Create a new OF_REAL Kconfig   Simon Glass
• [PATCH] efi_driver: fix a wrong cast   AKASHI Takahiro
  • [PATCH] efi_driver: fix a wrong cast   Heinrich Schuchardt
    • [PATCH] efi_driver: fix a wrong cast   AKASHI Takahiro
• [PATCH 1/3] treewide: Remove OF_PRIOR_STAGE from RISC-V boards   Ilias Apalodimas
  • [PATCH 2/3] board: arm: Remove OF_PRIOR_STAGE   Ilias Apalodimas
    • [PATCH 2/3] board: arm: Remove OF_PRIOR_STAGE   Simon Glass
  • [PATCH 3/3] treewide: Remove OF_PRIOR_STAGE   Ilias Apalodimas
    • [PATCH 3/3] treewide: Remove OF_PRIOR_STAGE   Simon Glass
  • [PATCH 1/3] treewide: Remove OF_PRIOR_STAGE from RISC-V boards   Simon Glass
  • [PATCH 1/3] treewide: Remove OF_PRIOR_STAGE from RISC-V boards   Zong Li
    • [PATCH 1/3] treewide: Remove OF_PRIOR_STAGE from RISC-V boards   Ilias Apalodimas
      • [PATCH 1/3] treewide: Remove OF_PRIOR_STAGE from RISC-V boards   Ilias Apalodimas
      • [PATCH 1/3] treewide: Remove OF_PRIOR_STAGE from RISC-V boards   Zong Li
      • [PATCH 1/3] treewide: Remove OF_PRIOR_STAGE from RISC-V boards   Ilias Apalodimas
      • [PATCH 1/3] treewide: Remove OF_PRIOR_STAGE from RISC-V boards   Mark Kettenis
      • [PATCH 1/3] treewide: Remove OF_PRIOR_STAGE from RISC-V boards   Ilias Apalodimas
• [PATCH] clk: versal: Enable only GATE type clocks   Michal Simek
  • [PATCH] clk: versal: Enable only GATE type clocks   Ashok Reddy Soma
    • [PATCH] clk: versal: Enable only GATE type clocks   Michal Simek
• [PATCH v7 8/8] drivers: net: macb: add fu740 support   Bin Meng
• [PATCH 00/25] Fix some non-NULL terminated strings in the networking subsystem   Vladimir Oltean
  • [PATCH 01/25] arch: powerpc: mpc85xx: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Vladimir Oltean
    • [PATCH 01/25] arch: powerpc: mpc85xx: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Ramon Fried
  • [PATCH 02/25] board: gdsys: a38x: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Vladimir Oltean
    • [PATCH 02/25] board: gdsys: a38x: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Ramon Fried
  • [PATCH 03/25] net: armada100_fec: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Vladimir Oltean
    • [PATCH 03/25] net: armada100_fec: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Ramon Fried
  • [PATCH 04/25] net: at91_emac: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Vladimir Oltean
    • [PATCH 04/25] net: at91_emac: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Ramon Fried
  • [PATCH 05/25] net: bcm-sf2: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Vladimir Oltean
    • [PATCH 05/25] net: bcm-sf2: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Ramon Fried
  • [PATCH 06/25] net: eepro100: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Vladimir Oltean
    • [PATCH 06/25] net: eepro100: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Ramon Fried
  • [PATCH 07/25] net: ep93xx: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Vladimir Oltean
    • [PATCH 07/25] net: ep93xx: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Ramon Fried
  • [PATCH 08/25] net: enetc: ensure imdio.name is NULL terminated after MDIO_NAME_LEN truncation   Vladimir Oltean
    • [PATCH 08/25] net: enetc: ensure imdio.name is NULL terminated after MDIO_NAME_LEN truncation   Ramon Fried
  • [PATCH 09/25] net: mcdmafec: ensure bus->name is NULL terminated after MDIO_NAME_LEN truncation   Vladimir Oltean
    • [PATCH 09/25] net: mcdmafec: ensure bus->name is NULL terminated after MDIO_NAME_LEN truncation   Ramon Fried
  • [PATCH 10/25] net: ftmac110: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Vladimir Oltean
    • [PATCH 10/25] net: ftmac110: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Ramon Fried
  • [PATCH 11/25] net: lpc32xx: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Vladimir Oltean
    • [PATCH 11/25] net: lpc32xx: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Ramon Fried
  • [PATCH 12/25] net: macb: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Vladimir Oltean
    • [PATCH 12/25] net: macb: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Ramon Fried
  • [PATCH 13/25] net: mpc8xx_fec: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Vladimir Oltean
    • [PATCH 13/25] net: mpc8xx_fec: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Ramon Fried
  • [PATCH 14/25] net: dsa: felix: ensure mii_bus->name is NULL terminated after MDIO_NAME_LEN truncation   Vladimir Oltean
    • [PATCH 14/25] net: dsa: felix: ensure mii_bus->name is NULL terminated after MDIO_NAME_LEN truncation   Ramon Fried
  • [PATCH 15/25] net: mvgbe: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Vladimir Oltean
    • [PATCH 15/25] net: mvgbe: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Ramon Fried
  • [PATCH 16/25] net: sh_eth: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Vladimir Oltean
    • [PATCH 16/25] net: sh_eth: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Ramon Fried
  • [PATCH 17/25] net: smc911x: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Vladimir Oltean
    • [PATCH 17/25] net: smc911x: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Ramon Fried
  • [PATCH 18/25] net: davinci_emac: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Vladimir Oltean
    • [PATCH 18/25] net: davinci_emac: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Ramon Fried
  • [PATCH 19/25] net: qe: uec: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Vladimir Oltean
    • [PATCH 19/25] net: qe: uec: ensure mdiodev->name is NULL terminated after MDIO_NAME_LEN truncation   Ramon Fried
  • [PATCH 20/25] net: mdio-uclass: rewrite dm_mdio_post_probe using strlcpy   Vladimir Oltean
    • [PATCH 20/25] net: mdio-uclass: rewrite dm_mdio_post_probe using strlcpy   Ramon Fried
  • [PATCH 21/25] scripts: ensure the cocci script for miiphy_register does not leave NULL-unterminated strings   Vladimir Oltean
  • [PATCH 22/25] net: dsa: felix: check return code of mdio_alloc and mdio_register   Vladimir Oltean
    • [PATCH 22/25] net: dsa: felix: check return code of mdio_alloc and mdio_register   Ramon Fried
  • [PATCH 23/25] net: dsa: ensure port names are NULL-terminated after DSA_PORT_NAME_LENGTH truncation   Vladimir Oltean
    • [PATCH 23/25] net: dsa: ensure port names are NULL-terminated after DSA_PORT_NAME_LENGTH truncation   Ramon Fried
  • [PATCH 24/25] arch: powerpc: mpc85xx: free MDIO bus if mdio_register fails   Vladimir Oltean
    • [PATCH 24/25] arch: powerpc: mpc85xx: free MDIO bus if mdio_register fails   Ramon Fried
  • [PATCH 25/25] scripts: ensure the cocci script for miiphy_register does not leak the MDIO bus   Vladimir Oltean
• [PATCH 0/2] ARM: DRA7: Enable OPP_HIGH for GPU, DSPEVE and IVA voltage domains   Amjad Ouled-Ameur
  • [PATCH 1/2] ARM: DRA7: Enable OPP_HIGH for DSPEVE and IVA voltage domains   Amjad Ouled-Ameur
  • [PATCH 2/2] ARM: DRA7: Enable OPP_HIGH for GPU voltage domain   Amjad Ouled-Ameur
  • [PATCH 0/2] ARM: DRA7: Enable OPP_HIGH for GPU, DSPEVE and IVA voltage domains   Suman Anna
    • [PATCH 0/2] ARM: DRA7: Enable OPP_HIGH for GPU, DSPEVE and IVA voltage domains   Tom Rini
• [PATCH] usb: xhci: reset endpoint on USB stall   Stefan Agner
  • [PATCH] usb: xhci: reset endpoint on USB stall   Marek Vasut
• [PATCH v2 1/2] nvme: Enable FUA   Jon Lin
  • [PATCH v2 1/2] nvme: Enable FUA   Shawn Lin
  • [PATCH v2 1/2] nvme: Enable FUA   Bin Meng
• [PATCH v2 2/2] nvme: Fix error in nvme_setup_prps   Jon Lin
  • [PATCH v2 2/2] nvme: Fix error in nvme_setup_prps   Shawn Lin
• [ANN] U-Boot v2021.10-rc5 released   Tom Rini
• Bug in board/logicpd/omap3som/omap3logic.h ???   Wolfgang Denk
  • Bug in board/logicpd/omap3som/omap3logic.h ???   Tom Rini
    • Bug in board/logicpd/omap3som/omap3logic.h ???   Adam Ford
      • Bug in board/logicpd/omap3som/omap3logic.h ???   Wolfgang Denk
• GSuit limit for recipients   Oleksandr Suvorov
  • GSuit limit for recipients   Tom Rini
    • GSuit limit for recipients   Oleksandr Suvorov
• Please pull u-boot-dm/next   Simon Glass
  • Please pull u-boot-dm/next   Tom Rini
• [PATCH v2 00/18] pxe: Refactoring to tidy up and prepare for bootflow   Simon Glass
  • [PATCH v2 01/18] Create a new boot/ directory   Simon Glass
  • [PATCH v2 02/18] pxe: Move API comments to the header files   Simon Glass
  • [PATCH v2 03/18] pxe: Use a context pointer   Simon Glass
  • [PATCH v2 04/18] pxe: Move do_getfile() into the context   Simon Glass
  • [PATCH v2 05/18] pxe: Add a userdata field to the context   Simon Glass
  • [PATCH v2 06/18] pxe: Tidy up the is_pxe global   Simon Glass
  • [PATCH v2 07/18] pxe: Move pxe_utils files   Simon Glass
  • [PATCH v2 08/18] pxe: Tidy up some comments in pxe_utils   Simon Glass
  • [PATCH v2 09/18] pxe: Tidy up code style a little in pxe_utils   Simon Glass
  • [PATCH v2 10/18] pxe: Move common parsing coding into pxe_util   Simon Glass
  • [PATCH v2 11/18] pxe: Clean up the use of bootfile   Simon Glass
  • [PATCH v2 12/18] pxe: Drop get_bootfile_path()   Simon Glass
  • [PATCH v2 13/18] lib: Add tests for simple_itoa()   Simon Glass
  • [PATCH v2 14/18] lib: Add a function to convert a string to a hex value   Simon Glass
  • [PATCH v2 15/18] pxe: Return the file size from the getfile() function   Simon Glass
  • [PATCH v2 16/18] pxe: Refactor sysboot to have one helper   Simon Glass
  • [PATCH v2 17/18] doc: Move distro boot doc to rST   Simon Glass
  • [PATCH v2 18/18] pxe: Allow calling the pxe_get logic directly   Simon Glass
• [PATCH 0/4] White Space cleanup   Wolfgang Denk
  • [PATCH 1/4] WS cleanup: remove trailing empty lines   Wolfgang Denk
    • [PATCH 1/4] WS cleanup: remove trailing empty lines   Tom Rini
  • [PATCH 2/4] WS cleanup: remove excessive empty lines   Wolfgang Denk
    • [PATCH 2/4] WS cleanup: remove excessive empty lines   Tom Rini
  • [PATCH 3/4] WS cleanup: remove trailing white space   Wolfgang Denk
    • [PATCH 3/4] WS cleanup: remove trailing white space   Simon Glass
    • [PATCH 3/4] WS cleanup: remove trailing white space   Tom Rini
  • [PATCH 4/4] WS cleanup: remove SPACE(s) followed by TAB   Wolfgang Denk
    • [PATCH 4/4] WS cleanup: remove SPACE(s) followed by TAB   Tom Rini
• [PATCH] drivers: ddr: lc_common_dimm_params.c : Fix Divison by zero issue   Maninder Singh
• [PATCH] ARM: omap3_logic: Cleanup usage of MUX_VAL   Adam Ford
  • [PATCH] ARM: omap3_logic: Cleanup usage of MUX_VAL   Wolfgang Denk
• [PATCH 0/2] riscv: Support booting SiFive Unmatched from SPI flash.   Thomas Skibo
  • [PATCH 1/2] riscv: Support booting SiFive Unmatched from SPI.   Thomas Skibo
  • [PATCH 2/2] riscv: Enable SPI flash env for SiFive Unmatched.   Thomas Skibo
• [PATCH 3/3] cmd: add acmconsole command   Pali Rohár
• Contributor call tomorrow   Simon Glass
• [PATCH] arm: dts: armada8040: Fix CP0 eMMC/SDIO support   Robert Marko
  • [PATCH] arm: dts: armada8040: Fix CP0 eMMC/SDIO support   Stefan Roese
  • [PATCH] arm: dts: armada8040: Fix CP0 eMMC/SDIO support   Stefan Roese
• [PATCH v2] rtc: ds1307: Handle oscillator-stop bit correctly   Mark Tomlinson
• [PATCH] net: phy: mscc: add support for VSC8502 in dual RGMII mode   Vladimir Oltean
  • [PATCH] net: phy: mscc: add support for VSC8502 in dual RGMII mode   Ramon Fried
• [PATCH] configs: ls1028a: ensure Ethernet is enabled   Vladimir Oltean
  • [PATCH] configs: ls1028a: ensure Ethernet is enabled   Bin Meng
• [PATCH 0/9] Support the SJA1105 DSA switch on the NXP LS1021A-TSN board   Vladimir Oltean
  • [PATCH 1/9] net: tsec: add support for promiscuous mode   Vladimir Oltean
    • [PATCH 1/9] net: tsec: add support for promiscuous mode   Ramon Fried
    • [PATCH 1/9] net: tsec: add support for promiscuous mode   Bin Meng
  • [PATCH 2/9] include: import if_vlan.h from Linux   Vladimir Oltean
    • [PATCH 2/9] include: import if_vlan.h from Linux   Ramon Fried
    • [PATCH 2/9] include: import if_vlan.h from Linux   Bin Meng
  • [PATCH 3/9] net: dsa: allow drivers to get the port OF node   Vladimir Oltean
    • [PATCH 3/9] net: dsa: allow drivers to get the port OF node   Ramon Fried
  • [PATCH 4/9] net: introduce a helper to determine whether to use in-band autoneg   Vladimir Oltean
    • [PATCH 4/9] net: introduce a helper to determine whether to use in-band autoneg   Ramon Fried
    • [PATCH 4/9] net: introduce a helper to determine whether to use in-band autoneg   Bin Meng
  • [PATCH 5/9] net: dsa: felix: configure the in-band autoneg property based on OF node info   Vladimir Oltean
    • [PATCH 5/9] net: dsa: felix: configure the in-band autoneg property based on OF node info   Ramon Fried
      • [PATCH 5/9] net: dsa: felix: configure the in-band autoneg property based on OF node info   Vladimir Oltean
  • [PATCH 6/9] net: add driver for NXP SJA1105 DSA L2 switch   Vladimir Oltean
    • [PATCH 6/9] net: add driver for NXP SJA1105 DSA L2 switch   Ramon Fried
  • [PATCH 7/9] arm: dts: ls1021a-tsn: add sja1105 and eth2 bindings   Vladimir Oltean
    • [PATCH 7/9] arm: dts: ls1021a-tsn: add sja1105 and eth2 bindings   Ramon Fried
  • [PATCH 8/9] configs: ls1021a-tsn: enable sja1105 switch driver   Vladimir Oltean
    • [PATCH 8/9] configs: ls1021a-tsn: enable sja1105 switch driver   Ramon Fried
    • [PATCH 8/9] configs: ls1021a-tsn: enable sja1105 switch driver   Bin Meng
  • [PATCH 9/9] configs: ls1021a-tsn: enable the generation of random Ethernet MAC addresses   Vladimir Oltean
    • [PATCH 9/9] configs: ls1021a-tsn: enable the generation of random Ethernet MAC addresses   Ramon Fried
    • [PATCH 9/9] configs: ls1021a-tsn: enable the generation of random Ethernet MAC addresses   Bin Meng
• imx6 DM_VIDEObroken   Tim Harvey
  • imx6 DM_VIDEObroken   Anatolij Gustschin
    • imx6 DM_VIDEObroken   Tim Harvey
      • imx6 DM_VIDEObroken   Fabio Estevam
      • imx6 DM_VIDEObroken   Tim Harvey
      • imx6 DM_VIDEObroken   Tim Harvey
• [PATCH 0/2] Add basic window watchdog mode support   Ashok Reddy Soma
  • [PATCH 1/2] watchdog: versal: Add support for basic window watchdog   Ashok Reddy Soma
  • [PATCH 2/2] watchdog: versal: Add support for expire now   Ashok Reddy Soma
  • [PATCH 0/2] Add basic window watchdog mode support   Michal Simek
• Please pull u-boot-i2c/next   Heiko Schocher
  • Please pull u-boot-i2c/next   Patrice CHOTARD
    • Please pull u-boot-i2c/next   Heiko Schocher
      • Please pull u-boot-i2c/next   Tom Rini
      • Please pull u-boot-i2c/next   Heiko Schocher
      • Please pull u-boot-i2c/next   Patrice CHOTARD
  • Please pull u-boot-i2c/next   Tom Rini
• [PATCH] nvme: invalidate correct memory range after read   Stefan Agner
  • [PATCH] nvme: invalidate correct memory range after read   Andre Przywara
• [PATCH] sandbox: Remove OF_HOSTFILE   Ilias Apalodimas
  • [PATCH] sandbox: Remove OF_HOSTFILE   Ilias Apalodimas
    • [PATCH] sandbox: Remove OF_HOSTFILE   Simon Glass
      • [PATCH] sandbox: Remove OF_HOSTFILE   Ilias Apalodimas
      • [PATCH] sandbox: Remove OF_HOSTFILE   Ilias Apalodimas
      • [PATCH] sandbox: Remove OF_HOSTFILE   Heinrich Schuchardt
• [PATCH] board: ti: Add support for the AM437x GP EVM mini board   Amjad Ouled-Ameur
• [PATCH] board: ti: Add support for the AM335x GP EVM mini board   Amjad Ouled-Ameur
  • [PATCH] board: ti: Add support for the AM335x GP EVM mini board   Tom Rini
• [PATCH] introduce CONFIG_DEVICE_TREE_INCLUDES   Roman Kopytin
  • [PATCH] introduce CONFIG_DEVICE_TREE_INCLUDES   Rasmus Villemoes
  • [PATCH] introduce CONFIG_DEVICE_TREE_INCLUDES   Simon Glass
• [PATCH] imx: mx7: spl: fix CONFIG_SPL_MAX_SIZE definition   Matthias Schiffer
• [PATCH] fastboot: fix partition name truncation in environment lookup   Matthias Schiffer
• [PATCH] tools/image-host.c: Fix spelling of "expected".   Vagrant Cascadian
  • [PATCH] tools/image-host.c: Fix spelling of "expected".   Simon Glass
• error -22 whilst initialising SD Card - New Raspberry Pi 4b 4GB (C0 stepping)   Craig Setera
• Please pull u-boot-net/network_master   Ramon Fried
  • Please pull u-boot-net/network_master   Tom Rini
• linksys wrt1900acs v2 boot problem   Dilyan Lazarov
• [PATCH 1/3] net: dsa: Use true instead of 1 in the set_promisc() call   Bin Meng
  • [PATCH 2/3] net: fec_mxc: Declare 'promisc' as bool   Bin Meng
    • [PATCH 2/3] net: fec_mxc: Declare 'promisc' as bool   Vladimir Oltean
  • [PATCH 3/3] net: tsec: Make redundant_init() static   Bin Meng
    • [PATCH 3/3] net: tsec: Make redundant_init() static   Vladimir Oltean
  • [PATCH 1/3] net: dsa: Use true instead of 1 in the set_promisc() call   Vladimir Oltean
• [RFC PATCH] rpi: copy the EMMC controller configuration from firmware-supplied DT   K900
  • [RFC PATCH] rpi: copy the EMMC controller configuration from firmware-supplied DT   François Ozog
    • [RFC PATCH] rpi: copy the EMMC controller configuration from firmware-supplied DT   François Ozog
      • [RFC PATCH] rpi: copy the EMMC controller configuration from firmware-supplied DT   François Ozog
• [PATCH v3 1/5] board: sl28: enable EFI_SET_TIME support   Michael Walle
  • [PATCH v3 3/5] board: sl28: enable EFI UpdateCapsule support   Michael Walle
  • [PATCH v3 4/5] doc: board: kontron: sl28: Reduce section levels and change title   Michael Walle
  • [PATCH v3 5/5] board: sl28: add update image documentation   Michael Walle
• [PATCH v3 2/5] board: sl28: generate FIT update image   Michael Walle
• [GIT PULL] rpi: updates for v2021.10 second round   Matthias Brugger
  • [GIT PULL] rpi: updates for v2021.10 second round   Tom Rini
• [PATCH v6 0/2] Support for Kontron Electronics i.MX6UL/ULL and i.MX8MM SoMs   Frieder Schrempf
  • [PATCH v6 1/2] imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)   Frieder Schrempf
  • [PATCH v6 2/2] imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x)   Frieder Schrempf
    • [PATCH v6 2/2] imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x)   Heiko Thiery
  • [PATCH v6 0/2] Support for Kontron Electronics i.MX6UL/ULL and i.MX8MM SoMs   Frieder Schrempf
    • [PATCH v6 0/2] Support for Kontron Electronics i.MX6UL/ULL and i.MX8MM SoMs   Stefano Babic
• [PATCH v2 00/10] Support the SJA1105 DSA switch on the NXP LS1021A-TSN board   Vladimir Oltean
  • [PATCH v2 01/10] net: tsec: add support for promiscuous mode   Vladimir Oltean
  • [PATCH v2 02/10] include: import if_vlan.h from Linux   Vladimir Oltean
  • [PATCH v2 03/10] net: dsa: allow drivers to get the port OF node   Vladimir Oltean
  • [PATCH v2 04/10] net: introduce a helper to determine whether to use in-band autoneg   Vladimir Oltean
    • [PATCH v2 04/10] net: introduce a helper to determine whether to use in-band autoneg   Bin Meng
  • [PATCH v2 05/10] net: dsa: felix: configure the in-band autoneg property based on OF node info   Vladimir Oltean
  • [PATCH v2 06/10] net: dsa: add driver for NXP SJA1105 L2 switch   Vladimir Oltean
  • [PATCH v2 07/10] net: dsa: sja1105: add support for SGMII   Vladimir Oltean
  • [PATCH v2 08/10] arm: dts: ls1021a-tsn: add sja1105 and eth2 bindings   Vladimir Oltean
  • [PATCH v2 09/10] configs: ls1021a-tsn: enable sja1105 switch driver   Vladimir Oltean
  • [PATCH v2 10/10] configs: ls1021a-tsn: enable the generation of random Ethernet MAC addresses   Vladimir Oltean
• [RFCv3 0/3] mtd: Support slc-mode for NTC CHIP   Chris Morgan
  • [RFCv3 1/3] mtd: Add support for Linux slc-mode for MLC NAND   Chris Morgan
  • [RFCv3 2/3] mtd: Add pairing info for Toshiba TC58TEG5DCLTA00 NAND   Chris Morgan
  • [RFCv3 3/3] mtd: Add pairing info for Hynix H27UCG8T2ETR NAND   Chris Morgan
• [PATCH 1/7] imx: ventana: add part command   Tim Harvey
  • [PATCH 3/7] imx: ventana: remove phy gpio reset from dt   Tim Harvey
  • [PATCH 4/7] imx: ventana: enable additional USB ether devices   Tim Harvey
  • [PATCH 5/7] imx: ventana: fix splash logo drawing   Tim Harvey
  • [PATCH 6/7] imx: ventana: update LVDS support   Tim Harvey
  • [PATCH 7/7] imx: ventana: fix USB hub reset   Tim Harvey
• [PATCH 2/7] imx: ventana: add U-Boot watchdog support   Tim Harvey
• [PATCH] mkimage: Don't disable encryption based on CONFIG_FIT_CIPHER   Simon Glass
• [PATCH v2] mtd: spi-nor: Add support for Spansion S25FL256L   tkuw584924 at gmail.com
• [PATCH v1 1/2] spl_fit. add hook to make fixes after fit header is loaded   Simon Glass
• [PATCH 2/2] doc: fix Latex margins   Simon Glass
• [PATCH 1/2] doc: require Sphinx 2.44   Simon Glass
• [PATCH v2] mtd: spi-nor-core: Add fixups for s25fs512s   tkuw584924 at gmail.com
  • [PATCH v2] mtd: spi-nor-core: Add fixups for s25fs512s   Pratyush Yadav
• [PATCH 1/3 v2] riscv: Remove OF_PRIOR_STAGE from RISC-V boards   Ilias Apalodimas
  • [PATCH 2/3 v2] board: arm: Remove OF_PRIOR_STAGE from the remaining Arm boards   Ilias Apalodimas
  • [PATCH 3/3] treewide: Remove OF_PRIOR_STAGE   Ilias Apalodimas
  • [PATCH 1/3 v2] riscv: Remove OF_PRIOR_STAGE from RISC-V boards   Ilias Apalodimas
• [PATCH 1/3 v3] riscv: Remove OF_PRIOR_STAGE from RISC-V boards   Ilias Apalodimas
  • [PATCH 2/3 v3] board: arm: Remove OF_PRIOR_STAGE from the remaining Arm boards   Ilias Apalodimas
  • [PATCH 3/3] treewide: Remove OF_PRIOR_STAGE   Ilias Apalodimas
• [PATCH] mtd: Add SPI Nor Flash chip GD25LQ256D ID   tekkamanv at 163.com
  • [PATCH] mtd: Add SPI Nor Flash chip GD25LQ256D ID   tekkamanv at 163.com
• [PATCH] riscv: add #define in asm/io.h for some device drivers   tekkamanv at 163.com
• [PATCH 0/2] riscv: Enable some configs in the Kconfig   tekkamanv at 163.com
  • [PATCH 2/2] riscv: Enable SYS_CLK_FREQ config   tekkamanv at 163.com
• [PATCH 1/2] riscv: Enable SYS_MALLOC_LEN config   tekkamanv at 163.com
• [PATCH] tools: imx8m_image: Support ddr3 firmware   Ariel D'Alessandro
• [GIT PULL] xilinx patches for v2022.01-rc1   Michal Simek
  • [GIT PULL] xilinx patches for v2022.01-rc1   Tom Rini
• How to build additional bin with adding dependency via Makefiles   Michal Simek
• [PATCH] fastboot: mmc: Fix dest size in strlcat()   Sean Anderson
  • [PATCH] fastboot: mmc: Fix dest size in strlcat()   Ariel D'Alessandro
  • [PATCH] fastboot: mmc: Fix dest size in strlcat()   Ariel D'Alessandro
• CI and ca-certificates packages   Tom Rini
  • CI and ca-certificates packages   Tom Rini
• [PATCH] dm: Fix util.h's broken include guard   Pierre-Clément Tosi
• [PATCH] cmd: sf: Support unaligned flash updates with 'sf update'   Frieder Schrempf
  • [PATCH] cmd: sf: Support unaligned flash updates with 'sf update'   Michael Walle
    • [PATCH] cmd: sf: Support unaligned flash updates with 'sf update'   Frieder Schrempf
      • [PATCH] cmd: sf: Support unaligned flash updates with 'sf update'   Michael Walle
  • [PATCH] cmd: sf: Support unaligned flash updates with 'sf update'   Michael Walle
• [PATCH v2 00/10] dra7: bring up and support IPU load/start   Amjad Ouled-Ameur
  • [PATCH v2 01/10] reset: dra7: Add a reset driver   Amjad Ouled-Ameur
  • [PATCH v2 02/10] arm: mach-omap2: load/start remoteproc IPU1/IPU2   Amjad Ouled-Ameur
  • [PATCH v2 03/10] drivers: misc: Makefile: Enable fs_loader compilation at SPL Level   Amjad Ouled-Ameur
  • [PATCH v2 04/10] linux: bitmap.h: Add find_next_zero_area function   Amjad Ouled-Ameur
  • [PATCH v2 05/10] remoteproc: uclass: Add remoteproc resource handling helpers   Amjad Ouled-Ameur
  • [PATCH v2 06/10] remoteproc: ipu: Add driver to bring up ipu   Amjad Ouled-Ameur
  • [PATCH v2 07/10] dts: dra7-ipu-common-early-boot.dtsi: Add all the ipu early boot related nodes   Amjad Ouled-Ameur
  • [PATCH v2 08/10] arm: dts: dra7: Add ipu and related nodes   Amjad Ouled-Ameur
  • [PATCH v2 09/10] arm: dts: dra7*/am57xx-idk-evm-u-boot: Add ipu early boot DT changes   Amjad Ouled-Ameur
  • [PATCH v2 10/10] dts: am57xx*: Add ipu early boot DT changes   Amjad Ouled-Ameur
• [PATCH 1/3] dfu: use pointer to pass length to dfu_write()   Frieder Schrempf
  • [PATCH 3/3] dfu: dfu_sf: Support unaligned offsets for writing to serial flash   Frieder Schrempf
• [PATCH 2/3] dfu: dfu_fs: Simplify find_sector()   Frieder Schrempf