[PATCH 1/1] ARM: vexpress_ca9x4: Reintroduce board in order to use with QEMU.

[Tom Rini]

On Tue, Sep 07, 2021 at 08:37:51AM +0200, Kristian Amlie wrote:

> vexpress_ca9x4 is seemingly the only board except for qemu_arm which
> is able to run U-Boot correctly, using the `-M vexpress-a9` option to
> QEMU. Building for qemu_arm and running qemu-system-arm with the `-M
> virt` argument has a number of downsides, most importantly that it
> only supports virtio storage drivers. This significantly reduces its
> usefulness in testing memory card and Flash solutions, especially when
> the tested images are from a third party source.
> 
> So therefore we reintroduce the vexpress_ca9x4 board in this commit,
> with the explicit goal of using it with QEMU.
> 
> A number of differences to note from the original:
> 
> * Since the board was apparently unmaintained, I have now set myself
>   as the maintainer.
> 
> * The board has been converted to use the driver model, which was the
>   reason it was removed in the first place.
> 
> * The vexpress_ca15_tc2 and vexpress_ca5x2 boards, which were removed
>   in the same commit, are not necessary for the QEMU use case, and
>   have been omitted.
> 
> * An `mmc0` alias was introduced in the dts file. The mmc is not
>   detected correctly without this, now that it's based on the device
>   tree instead of the board's init function.
> 
> * A couple of other nodes were removed because they were problematic
>   when trying to run the UEFI bootmgr. Once again, the primary use
>   case here is QEMU, and these nodes are not needed for that to work.
> 
> * Unnecessary board init code has been removed, thanks to driver model
>   and device tree.
> 
> * `CONFIG_OF_EMBED` has been enabled. I know this goes against
>   recommended practice, but there doesn't seem to be any other way to
>   pass the dtb to U-Boot in the QEMU scenario. Using the -dtb argument
>   does not work, I suppose because U-Boot doesn't use the same
>   mechanics as the kernel when it's booting.
> 
> * Load addresses have been changed to fit QEMU use case.
> 
> People wanting to get a more detailed, yet somewhat isolated, diff
> between this and the original, can run this command:
> 
>   git diff c6c26a05b89f25a06e7562f8c2071b60fd0c9eac~1 -- \
>       $( git diff-tree --diff-filter=A -r --name-only HEAD~1 HEAD)
> 
> (Make sure to either check out this commit first, or replace HEAD with
> the commit ID of this commit)
> 
> Signed-off-by: Kristian Amlie <kristian.amlie at northern.tech>

Applied to u-boot/next, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210924/3035d8d6/attachment-0001.sig>