[PATCH v2 1/1] riscv: show code leading to exception

[Sean Anderson]

On 9/4/21 4:36 AM, Heinrich Schuchardt wrote:
> To make analyzing exceptions easier output the code that leads to it.
> We already do the same on the ARM platform.
> 
> Here is an example:
> 
>      => exception ebreak
>      Unhandled exception: Breakpoint
>      EPC: 000000008ff5d50e RA: 000000008ff5d62c TVAL: 0000000000000000
>      EPC: 000000008020b50e RA: 000000008020b62c reloc adjusted
> 
>      Code: 2785 0693 07a0 dce3 fef6 47a5 d563 00e7 (9002)
> 
> To disassemble the code we can use the decodecode script:
> 
>      $ echo 'Code: 2785 0693 07a0 dce3 fef6 47a5 d563 00e7 (9002)' | \
>        CROSS_COMPILE=riscv64-linux-gnu- scripts/decodecode
> 
>      Code: 2785 0693 07a0 dce3 fef6 47a5 d563 00e7 (9002)
>      All code
>      ========
>         0:   2785                    addiw   a5,a5,1
>         2:   07a00693                li      a3,122
>         6:   fef6dce3                bge     a3,a5,0xfffffffffffffffe
>         a:   47a5                    li      a5,9
>         c:   00e7d563                bge     a5,a4,0x16
>        10:*  9002                    ebreak         <-- trapping instruction
>              ...
> 
>      Code starting with the faulting instruction
>      ===========================================
>         0:   9002                    ebreak
>              ...
> 
> As it is not always clear if the first 16 bits are at the start or in the
> middle of a 32bit instruction it may become necessary to strip the first
> u16 from the output before calling decodecode to get the correct
> disassembled code.
> 
> Signed-off-by: Heinrich Schuchardt <xypron.glpk at gmx.de>
> ---
> v2:
> 	remove support for instructions longer than 32 bit as these are
> 	not yet specified
> ---
>   arch/riscv/lib/interrupts.c | 33 +++++++++++++++++++++++++++++++++
>   1 file changed, 33 insertions(+)
> 
> diff --git a/arch/riscv/lib/interrupts.c b/arch/riscv/lib/interrupts.c
> index 7525c152b8..100be2e966 100644
> --- a/arch/riscv/lib/interrupts.c
> +++ b/arch/riscv/lib/interrupts.c
> @@ -51,6 +51,38 @@ static void show_regs(struct pt_regs *regs)
>   #endif
>   }
> 
> +/**
> + * instr_len() - get instruction length
> + *
> + * @i:		low 16 bits of the instruction
> + * Return:	number of u16 in instruction
> + */
> +static int instr_len(u16 i)
> +{
> +	if ((i & 0x03) != 0x03)
> +		return 1;
> +	/* Instructions with more than 32 bits are not yet specified */
> +	return 2;
> +}
> +
> +/**
> + * show_code() - display code leading to exception
> + *
> + * @epc:	program counter
> + */
> +static void show_code(ulong epc)
> +{
> +	u16 *pos = (u16 *)(epc & ~1UL);
> +	int i, len = instr_len(*pos);
> +
> +	printf("\nCode: ");
> +	for (i = -8; i; ++i)
> +		printf("%04x ", pos[i]);
> +	printf("(");
> +	for (i = 0; i < len; ++i)
> +		printf("%04x%s", pos[i], i + 1 == len ? ")\n" : " ");
> +}
> +
>   static void _exit_trap(ulong code, ulong epc, ulong tval, struct pt_regs *regs)
>   {
>   	static const char * const exception_code[] = {
> @@ -85,6 +117,7 @@ static void _exit_trap(ulong code, ulong epc, ulong tval, struct pt_regs *regs)
>   		       epc - gd->reloc_off, regs->ra - gd->reloc_off);
> 
>   	show_regs(regs);
> +	show_code(epc);
>   	show_efi_loaded_images(epc);
>   	panic("\n");
>   }
> --
> 2.30.2
> 

Reviewed-by: Sean Anderson <seanga2 at gmail.com>