[PATCH v2 2/2] board: mntre: imx8mq: Add MNT Reform 2 board support

[Patrick Wildt]

Am Fri, Sep 03, 2021 at 11:01:06AM +0200 schrieb Heiko Thiery:
> Hi Patrick,
> 
> Am Do., 2. Sept. 2021 um 23:44 Uhr schrieb Patrick Wildt <patrick at blueri.se>:
> >
> > The MNT Reform 2 is a modular DIY laptop.  In its initial version it
> > is based on the BoundaryDevices i.MX8MQ SoM.  Some parts have been
> > lifted from BoundaryDevices official U-Boot downstream project.
> >
> > Signed-off-by: Patrick Wildt <patrick at blueri.se>
> 
> I just sent a patch to add board support for the Kontron pitx-imx8m
> that is also based on the imx8mq SOC. I already switched the flash.bin
> generation to binman. Maybe you can use this patchset as a template
> and also switch to binman for that board.
> 
> --
> Heiko

Hi Heiko,

I think that's a good idea.  But I seem to be having issues:

U-Boot SPL 2021.10-rc3-00023-g2c634e01b6-dirty (Sep 03 2021 - 18:22:04 +0200)
Normal Boot
Could not get FIT buffer of 686592 bytes
        check CONFIG_SYS_SPL_MALLOC_SIZE

Is there anything specific I need to change to make that work?

Otherwise we can probably also switch to binman after this patchset is
merged.

Patrick