[PATCH 1/3] phy: marvell: a3700: Set TXDCLK_2X_SEL bit during PCIe initialization

[Pali Rohár]

Marvell Armada 3700 Functional Specifications, section 52.2 PCIe Link
Initialization says that TXDCLK_2X_SEL bit needs to be enabled for PCIe
Root Complex mode.

Same change was included in TF-A project:
https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/9408

Signed-off-by: Pali Rohár <pali at kernel.org>
---
 drivers/phy/marvell/comphy_a3700.c | 2 +-
 drivers/phy/marvell/comphy_a3700.h | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/marvell/comphy_a3700.c b/drivers/phy/marvell/comphy_a3700.c
index 5eb137db4884..afa1295bbdb8 100644
--- a/drivers/phy/marvell/comphy_a3700.c
+++ b/drivers/phy/marvell/comphy_a3700.c
@@ -200,7 +200,7 @@ static int comphy_pcie_power_up(u32 speed, u32 invert)
 	 * 6. Enable the output of 100M/125M/500M clock
 	 */
 	reg_set16(phy_addr(PCIE, MISC_REG0),
-		  0xA00D | rb_clk500m_en | rb_clk100m_125m_en, 0xFFFF);
+		  0xA00D | rb_clk500m_en | rb_txdclk_2x_sel | rb_clk100m_125m_en, 0xFFFF);
 
 	/*
 	 * 7. Enable TX
diff --git a/drivers/phy/marvell/comphy_a3700.h b/drivers/phy/marvell/comphy_a3700.h
index 8748c6c84ae6..23c8ffbff44d 100644
--- a/drivers/phy/marvell/comphy_a3700.h
+++ b/drivers/phy/marvell/comphy_a3700.h
@@ -120,6 +120,7 @@ static inline void __iomem *phy_addr(enum phy_unit unit, u32 addr)
 
 #define MISC_REG0			0x4f
 #define rb_clk100m_125m_en		BIT(4)
+#define rb_txdclk_2x_sel		BIT(6)
 #define rb_clk500m_en			BIT(7)
 #define rb_ref_clk_sel			BIT(10)
 
-- 
2.20.1