[PATCH] board/freescale/vid : move platform specific definitions

Wasim Khan (OSS) wasim.khan at oss.nxp.com
Fri Sep 24 22:27:43 CEST 2021


Hi Tom,

> -----Original Message-----
> From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Tom Rini
> Sent: Friday, September 24, 2021 5:24 PM
> To: Wasim Khan (OSS) <wasim.khan at oss.nxp.com>
> Cc: Priyanka Jain <priyanka.jain at nxp.com>; Varun Sethi <V.Sethi at nxp.com>; u-
> boot at lists.denx.de
> Subject: Re: [PATCH] board/freescale/vid : move platform specific definitions
> 
> On Fri, Sep 24, 2021 at 08:36:45AM +0000, Wasim Khan (OSS) wrote:
> > Hi Tom,
> >
> > > -----Original Message-----
> > > From: Tom Rini <trini at konsulko.com>
> > > Sent: Tuesday, September 21, 2021 8:14 PM
> > > To: Wasim Khan (OSS) <wasim.khan at oss.nxp.com>
> > > Cc: Priyanka Jain <priyanka.jain at nxp.com>; Varun Sethi
> > > <V.Sethi at nxp.com>; u- boot at lists.denx.de; Wasim Khan
> > > <wasim.khan at nxp.com>
> > > Subject: Re: [PATCH] board/freescale/vid : move platform specific
> > > definitions
> > >
> > > On Tue, Sep 21, 2021 at 04:24:57PM +0200, Wasim Khan wrote:
> > >
> > > > From: Wasim Khan <wasim.khan at nxp.com>
> > > >
> > > > VID is a common driver. Move platform specific definitions to
> > > > platform specific header files
> > > >
> > > > Signed-off-by: Wasim Khan <wasim.khan at nxp.com>
> > > > ---
> > > >  board/freescale/common/vid.h     | 10 ----------
> > > >  include/configs/lx2160a_common.h |  7 +++++++
> > > >  2 files changed, 7 insertions(+), 10 deletions(-)
> > >
> > > NAK.  Things need to move out of include/configs/ and not in to
> > > them, please find another common header file to use.
> > >
> > > --
> > > Tom
> >
> > Thank you so much for review.
> > Header files 'include/configs/' are auto picked for platform we are using.
> > I find it useful especially for common drivers like VID to auto pick required
> values for underneath platform from
> 'include/configs/<CONFIG_SYS_CONFIG_NAME>.h' and we don't need changes
> in common driver.
> >
> > (arch/Kconfig)
> > config SYS_CONFIG_NAME
> >         string
> >         help
> >           This option should contain the base name of board header file.
> >           The header file include/configs/<CONFIG_SYS_CONFIG_NAME>.h
> >           should be included from include/config.h.
> >
> >
> > (Same is recommended for add/remove boards: doc/README.kconfig)
> >          Define CONFIG_SYS_CONFIG_NAME="target" to include
> >          include/configs/<target>.h
> >
> >
> > Currently all NXP platforms (except LX2 series) are using
> CONFIG_SYS_CONFIG_NAME to include platform specific header file for VID
> driver. I extended the support for LX2 and because the changes are common for
> lx2160ardb, lx2160aqds and lx2162aqds , I added them to lx2160a_common.h.
> >
> > Do you want me to move changes from ' include/configs/lx2160a_common.h'
> to ' include/configs/lx2160ardb.h',  ' include/configs/lx2160aqds.h' and '
> include/configs/lx2162aqds.h'  ?
> >
> > Or you want me to avoid adding anything to
> 'include/configs/<CONFIG_SYS_CONFIG_NAME>.h ' files ? Is there any reason to
> do so ?
> 
> I want you to find a place outside of include/config/ for these values to reside,
> yes.  The long term goal of moving everything to Kconfig means that we will not
> have include/config/ headers anymore.  Further, values like this which are not
> actually user-configurable should neither be CONFIG-prefixed (which these are
> not, good!) nor reside in include/config/ at all.  There should be some
> appropriate header perhaps under arch/arm/include/asm/arch-fsl-layerscape/
> to put these values.
> And if they need to be shared a bit wider, a fsl-layerscape-common or similar
> directory could be used (similar to arch/arm/include/asm/ti-common/).  Does
> this make sense?  Thanks.
> 
> --
> Tom


Thanks for explaining it to me. 
Because VID driver is applicable for arm/x86 platforms, I need to check what would be best place for the header file , but I understood your point. 

Thanks,
Wasim

 


More information about the U-Boot mailing list