[PATCH] board/freescale/vid : move platform specific definitions

[Tom Rini]

On Fri, Sep 24, 2021 at 08:36:45AM +0000, Wasim Khan (OSS) wrote:
> Hi Tom,
> 
> > -----Original Message-----
> > From: Tom Rini <trini at konsulko.com>
> > Sent: Tuesday, September 21, 2021 8:14 PM
> > To: Wasim Khan (OSS) <wasim.khan at oss.nxp.com>
> > Cc: Priyanka Jain <priyanka.jain at nxp.com>; Varun Sethi <V.Sethi at nxp.com>; u-
> > boot at lists.denx.de; Wasim Khan <wasim.khan at nxp.com>
> > Subject: Re: [PATCH] board/freescale/vid : move platform specific definitions
> > 
> > On Tue, Sep 21, 2021 at 04:24:57PM +0200, Wasim Khan wrote:
> > 
> > > From: Wasim Khan <wasim.khan at nxp.com>
> > >
> > > VID is a common driver. Move platform specific definitions to platform
> > > specific header files
> > >
> > > Signed-off-by: Wasim Khan <wasim.khan at nxp.com>
> > > ---
> > >  board/freescale/common/vid.h     | 10 ----------
> > >  include/configs/lx2160a_common.h |  7 +++++++
> > >  2 files changed, 7 insertions(+), 10 deletions(-)
> > 
> > NAK.  Things need to move out of include/configs/ and not in to them, please
> > find another common header file to use.
> > 
> > --
> > Tom
> 
> Thank you so much for review.
> Header files 'include/configs/' are auto picked for platform we are using. 
> I find it useful especially for common drivers like VID to auto pick required values for underneath platform from 'include/configs/<CONFIG_SYS_CONFIG_NAME>.h' and we don't need changes in common driver.
> 
> (arch/Kconfig)
> config SYS_CONFIG_NAME
>         string
>         help
>           This option should contain the base name of board header file.
>           The header file include/configs/<CONFIG_SYS_CONFIG_NAME>.h
>           should be included from include/config.h.
> 
> 
> (Same is recommended for add/remove boards: doc/README.kconfig)
>          Define CONFIG_SYS_CONFIG_NAME="target" to include
>          include/configs/<target>.h
> 
> 
> Currently all NXP platforms (except LX2 series) are using CONFIG_SYS_CONFIG_NAME to include platform specific header file for VID driver. I extended the support for LX2 and because the changes are common for lx2160ardb, lx2160aqds and lx2162aqds , I added them to lx2160a_common.h. 
> 
> Do you want me to move changes from ' include/configs/lx2160a_common.h' to ' include/configs/lx2160ardb.h',  ' include/configs/lx2160aqds.h' and ' include/configs/lx2162aqds.h'  ?
>  
> Or you want me to avoid adding anything to 'include/configs/<CONFIG_SYS_CONFIG_NAME>.h ' files ? Is there any reason to do so ?

I want you to find a place outside of include/config/ for these values
to reside, yes.  The long term goal of moving everything to Kconfig
means that we will not have include/config/ headers anymore.  Further,
values like this which are not actually user-configurable should neither
be CONFIG-prefixed (which these are not, good!) nor reside in
include/config/ at all.  There should be some appropriate header perhaps
under arch/arm/include/asm/arch-fsl-layerscape/ to put these values.
And if they need to be shared a bit wider, a fsl-layerscape-common or
similar directory could be used (similar to
arch/arm/include/asm/ti-common/).  Does this make sense?  Thanks.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210924/e6a498d1/attachment.sig>