[PATCH u-boot-spi v2 0/9] Fix `mtd erase` when used with mtdpart

[Marek Behún]

From: Marek Behún <marek.behun at nic.cz>

The original cover letter said:

this patch series fixes the `mtd erase` command when used with mtdpart
with a partition of non-zero offset.

Currently when the `mtd erase` command is used for such a partition,
it does not erase all blocks. Instead after a block is erased, the next
block address not current block address + block size, but current block
address + block size + partition offset, due to spi_nor_erase() not
calling mtd_erase_callback():
  => mtd erase "Rescue system"  
  Erasing 0x00000000 ... 0x006fffff (1792 eraseblock(s))
  jedec_spi_nor spi-nor at 0: at 0x100000, len 4096
  jedec_spi_nor spi-nor at 0: at 0x201000, len 4096
  jedec_spi_nor spi-nor at 0: at 0x302000, len 4096
  jedec_spi_nor spi-nor at 0: at 0x403000, len 4096
  jedec_spi_nor spi-nor at 0: at 0x504000, len 4096
  jedec_spi_nor spi-nor at 0: at 0x605000, len 4096
  jedec_spi_nor spi-nor at 0: at 0x706000, len 4096

This series adds some fixes to spi_nor_erase() function, then adds
calling of mtd_erase_callback() to fix this bug.

The series also contains an improvement - adding the posibility to
interrupt spi_nor_erase() with Ctrl+C; and another one - making mtdpart's
_erase() method more sane so that the above mentioned bug will not occur
even if underlying driver does not call mtd_erase_callback().

Finally the last patch removes mtd_erase_callback() entirely, since:
- all provided callbacks across U-Boot are no-ops
- mtd_erase_callback() is abused for completely different purpose
  than the original one (as explained in last commit message)

Marek

Changes since v1:
- fixed CI bugs (by removing mtd_erase_callback() entirely)

Marek Behún (9):
  mtd: spi-nor-core: Try cleaning up in case writing BAR failed
  mtd: spi-nor-core: Check return value of write_enable() in
    spi_nor_erase()
  mtd: spi-nor-core: Don't overwrite return value if it is non-zero
  mtd: spi-nor-core: Check return value of write_disable() in
    spi_nor_erase()
  mtd: spi-nor-core: Don't check for zero length in spi_nor_erase()
  mtd: spi-nor-core: Call mtd_erase_callback() from spi_nor_erase()
  mtd: spi-nor-core: Check for ctrlc() in spi_nor_erase()
  mtd: mtdpart: Make mtdpart's _erase method sane
  mtd: Remove mtd_erase_callback() entirely

 cmd/onenand.c                      |  9 ++-----
 drivers/mtd/altera_qspi.c          |  3 ---
 drivers/mtd/cfi_mtd.c              |  1 -
 drivers/mtd/mtdconcat.c            | 11 --------
 drivers/mtd/mtdcore.c              |  8 ------
 drivers/mtd/mtdpart.c              | 23 +++++-----------
 drivers/mtd/nand/raw/nand_base.c   |  4 ---
 drivers/mtd/onenand/onenand_base.c |  3 ---
 drivers/mtd/spi/sf_mtd.c           |  1 -
 drivers/mtd/spi/spi-nor-core.c     | 43 +++++++++++++++++++++++-------
 drivers/mtd/ubi/io.c               | 13 ---------
 env/onenand.c                      |  4 +--
 fs/yaffs2/yaffs_mtdif.c            |  1 -
 include/linux/mtd/mtd.h            | 11 --------
 include/nand.h                     |  1 -
 15 files changed, 42 insertions(+), 94 deletions(-)

-- 
2.32.0