[PATCH] sunxi: mmc: A20: Fix MMC optimisation

Jaehoon Chung jh80.chung at gmail.com
Sat Sep 4 12:38:17 CEST 2021



Andre Przywara wrote on 9/4/21 12:49 AM:
> Some SoCs (as seen on A20) seem to misreport the MMC FIFO level if the
> FIFO is completely full: the level size reads as zero, but the FIFO_FULL
> bit is set. We won't do a single iteration of the read loop in this
> case, so will be stuck forever.
>
> Check for this situation and use a safe minimal FIFO size instead when
> we hit this case.
>
> This fixes MMC boot on A20 devices after the MMC FIFO optimisation
> (9faae5457f52).
>
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>

Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com>

Best Regards,
Jaehoon Chung

> ---
>  drivers/mmc/sunxi_mmc.c | 10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
> index 178b8cf106..aaab0cf866 100644
> --- a/drivers/mmc/sunxi_mmc.c
> +++ b/drivers/mmc/sunxi_mmc.c
> @@ -349,10 +349,14 @@ static int mmc_trans_data_by_cpu(struct sunxi_mmc_priv *priv, struct mmc *mmc,
>  		 * register without checking the status register after every
>  		 * read. That saves half of the costly MMIO reads, effectively
>  		 * doubling the read performance.
> +		 * Some SoCs (A20) report a level of 0 if the FIFO is
> +		 * completely full (value masked out?). Use a safe minimal
> +		 * FIFO size in this case.
>  		 */
> -		for (in_fifo = SUNXI_MMC_STATUS_FIFO_LEVEL(status);
> -		     in_fifo > 0;
> -		     in_fifo--)
> +		in_fifo = SUNXI_MMC_STATUS_FIFO_LEVEL(status);
> +		if (in_fifo == 0 && (status & SUNXI_MMC_STATUS_FIFO_FULL))
> +			in_fifo = 32;
> +		for (; in_fifo > 0; in_fifo--)
>  			buff[i++] = readl_relaxed(&priv->reg->fifo);
>  		dmb();
>  	}



More information about the U-Boot mailing list