[PATCH 04/17] keystone2: Move CONFIG_AEMIF_CNTRL_BASE out of CONFIG namespace

[Tom Rini]

This is only used in the aemif driver that is otherwise currently
keystone2 centric.  Moving forward, if this is applicable to some other
platform then such base addresses should be able to be obtained via the
device tree.  Use KS2_AEMIF_CNTRL_BASE directly now rather than
indirectly.

Signed-off-by: Tom Rini <trini at konsulko.com>
---
 drivers/memory/ti-aemif.c            | 9 ++++-----
 include/configs/ti_armv7_keystone2.h | 2 --
 2 files changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/memory/ti-aemif.c b/drivers/memory/ti-aemif.c
index 6250e274e12f..c4bc88c15108 100644
--- a/drivers/memory/ti-aemif.c
+++ b/drivers/memory/ti-aemif.c
@@ -9,11 +9,10 @@
 #include <common.h>
 #include <asm/ti-common/ti-aemif.h>
 
-#define AEMIF_WAITCYCLE_CONFIG		(CONFIG_AEMIF_CNTRL_BASE + 0x4)
-#define AEMIF_NAND_CONTROL		(CONFIG_AEMIF_CNTRL_BASE + 0x60)
-#define AEMIF_ONENAND_CONTROL		(CONFIG_AEMIF_CNTRL_BASE + 0x5c)
-#define AEMIF_CONFIG(cs)		(CONFIG_AEMIF_CNTRL_BASE + 0x10 \
-					 + (cs * 4))
+#define AEMIF_WAITCYCLE_CONFIG		(KS2_AEMIF_CNTRL_BASE + 0x4)
+#define AEMIF_NAND_CONTROL		(KS2_AEMIF_CNTRL_BASE + 0x60)
+#define AEMIF_ONENAND_CONTROL		(KS2_AEMIF_CNTRL_BASE + 0x5c)
+#define AEMIF_CONFIG(cs)		(KS2_AEMIF_CNTRL_BASE + 0x10 + (cs * 4))
 
 #define AEMIF_CFG_SELECT_STROBE(v)	((v) ? 1 << 31 : 0)
 #define AEMIF_CFG_EXTEND_WAIT(v)	((v) ? 1 << 30 : 0)
diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
index 690ef0e14471..aa7b6ca9b809 100644
--- a/include/configs/ti_armv7_keystone2.h
+++ b/include/configs/ti_armv7_keystone2.h
@@ -108,8 +108,6 @@
 #define CONFIG_KSNET_SERDES_SGMII2_BASE		KS2_SGMII_SERDES2_BASE
 #define CONFIG_KSNET_SERDES_LANES_PER_SGMII	KS2_LANES_PER_SGMII_SERDES
 
-#define CONFIG_AEMIF_CNTRL_BASE		KS2_AEMIF_CNTRL_BASE
-
 /* I2C Configuration */
 #define CONFIG_SYS_DAVINCI_I2C_SPEED	100000
 #define CONFIG_SYS_DAVINCI_I2C_SLAVE	0x10 /* SMBus host address */
-- 
2.17.1