[PATCH 4/4] net: dsa: felix: remove "xgmii" phy-mode

[Ramon Fried]

On Sat, Sep 18, 2021 at 3:34 PM Vladimir Oltean <vladimir.oltean at nxp.com> wrote:
>
> The felix driver runs only on NXP LS1028A, which most definitely does
> not support the parallel 10G interface, just USXGMII, and that only up
> to 2.5Gbps (toned down from 10 Gbps via symbol replication).
>
> Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
> ---
>  drivers/net/mscc_eswitch/felix_switch.c | 1 -
>  1 file changed, 1 deletion(-)
>
> diff --git a/drivers/net/mscc_eswitch/felix_switch.c b/drivers/net/mscc_eswitch/felix_switch.c
> index bd40c3b8b1bb..47ac45b354da 100644
> --- a/drivers/net/mscc_eswitch/felix_switch.c
> +++ b/drivers/net/mscc_eswitch/felix_switch.c
> @@ -222,7 +222,6 @@ static void felix_start_pcs(struct udevice *dev, int port,
>         case PHY_INTERFACE_MODE_QSGMII:
>                 felix_init_sgmii(imdio, port, autoneg);
>                 break;
> -       case PHY_INTERFACE_MODE_XGMII:
>         case PHY_INTERFACE_MODE_10GBASER:
>         case PHY_INTERFACE_MODE_USXGMII:
>                 if (felix_init_sxgmii(imdio, port))
> --
> 2.25.1
>
Reviewed-by: Ramon Fried <rfried.dev at gmail.com>