[PATCH 4/4] net: dsa: felix: remove "xgmii" phy-mode

[Vladimir Oltean]

The felix driver runs only on NXP LS1028A, which most definitely does
not support the parallel 10G interface, just USXGMII, and that only up
to 2.5Gbps (toned down from 10 Gbps via symbol replication).

Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
---
 drivers/net/mscc_eswitch/felix_switch.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/mscc_eswitch/felix_switch.c b/drivers/net/mscc_eswitch/felix_switch.c
index bd40c3b8b1bb..47ac45b354da 100644
--- a/drivers/net/mscc_eswitch/felix_switch.c
+++ b/drivers/net/mscc_eswitch/felix_switch.c
@@ -222,7 +222,6 @@ static void felix_start_pcs(struct udevice *dev, int port,
 	case PHY_INTERFACE_MODE_QSGMII:
 		felix_init_sgmii(imdio, port, autoneg);
 		break;
-	case PHY_INTERFACE_MODE_XGMII:
 	case PHY_INTERFACE_MODE_10GBASER:
 	case PHY_INTERFACE_MODE_USXGMII:
 		if (felix_init_sxgmii(imdio, port))
-- 
2.25.1