[PATCH v3 3/5] board: sl28: enable EFI UpdateCapsule support

[Michael Walle]

Enable support for update over EFI UpdateCapsule mechanism. This board
doesn't support setting EFI variables after ExitBootservices().
Therefore, we are also enabling EFI_IGNORE_OSINDICATIONS.

Signed-off-by: Michael Walle <michael at walle.cc>
---
changes since v2:
 - use CONFIG_EFI_CAPSULE_FIRMWARE_FIT instead of
   CONFIG_EFI_CAPSULE_FIRMWARE_RAW

changes since v1:
 - new patch

 configs/kontron_sl28_defconfig | 6 ++++++
 include/configs/kontron_sl28.h | 2 ++
 2 files changed, 8 insertions(+)

diff --git a/configs/kontron_sl28_defconfig b/configs/kontron_sl28_defconfig
index ae729efdfe..9dbdd5277c 100644
--- a/configs/kontron_sl28_defconfig
+++ b/configs/kontron_sl28_defconfig
@@ -60,6 +60,8 @@ CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
 CONFIG_SYS_FSL_DDR3=y
+CONFIG_DFU_MMC=y
+CONFIG_DFU_SF=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 CONFIG_I2C_DEFAULT_BUS_NUMBER=0
 CONFIG_I2C_MUX=y
@@ -92,3 +94,7 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_OF_LIBFDT_ASSUME_MASK=0x0
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_EFI_SET_TIME=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_IGNORE_OSINDICATIONS=y
+CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h
index bfb4e67c8f..a02b8ce2b1 100644
--- a/include/configs/kontron_sl28.h
+++ b/include/configs/kontron_sl28.h
@@ -96,6 +96,8 @@
 	"envload=env import -d -b ${env_addr}\0" \
 	"install_rcw=source 20200000\0" \
 	"fdtfile=freescale/fsl-ls1028a-kontron-sl28.dtb\0" \
+	"dfu_alt_info=sf 0:0=u-boot-bin raw 0x210000 0x1d0000;" \
+			    "u-boot-env raw 0x3e0000 0x20000\0" \
 	ENV_MEM_LAYOUT_SETTINGS \
 	BOOTENV
 
-- 
2.30.2