[PATCH v3 3/4] mtd: spi-nor-core: set 4byte opcode when possible

[Pratyush Yadav]

On 13/09/21 01:42PM, JaimeLiao wrote:
> Following linux kernel to check address width and 4byte flag to enable
> 4byte opcode setting.
> 
> Signed-off-by: JaimeLiao <jaimeliao.tw at gmail.com>
> ---
>  drivers/mtd/spi/spi-nor-core.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c
> index 4bcd58d839..81c61d87bc 100644
> --- a/drivers/mtd/spi/spi-nor-core.c
> +++ b/drivers/mtd/spi/spi-nor-core.c
> @@ -3902,6 +3902,10 @@ int spi_nor_scan(struct spi_nor *nor)
>  		return -EINVAL;
>  	}
>  
> +	/* Set 4byte opcodes when possible. */
> +	if (nor->addr_width == 4 && info->flags & SPI_NOR_4B_OPCODES)
> +		spi_nor_set_4byte_opcodes(nor, info);

This is already done a few lines above. Why do you need to do it again?

> +
>  	/* Send all the required SPI flash commands to initialize device */
>  	ret = spi_nor_init(nor);
>  	if (ret)
> -- 
> 2.17.1
> 

-- 
Regards,
Pratyush Yadav
Texas Instruments Inc.