[PATCH v2 8/9] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux

[Vladimir Oltean]

On Wed, Sep 01, 2021 at 10:55:21AM +0200, Michael Walle wrote:
>  		sata: sata at 3200000 {
>  			compatible = "fsl,ls1028a-ahci";
> -			reg = <0x0 0x3200000 0x0 0x10000	/* ccsr sata base */
> -				   0x7 0x100520  0x0 0x4>;		/* ecc sata addr*/
> -			reg-names = "sata-base", "ecc-addr";
> +			reg = <0x0 0x3200000 0x0 0x10000>,
> +				<0x7 0x100520 0x0 0x4>;
> +			reg-names = "ahci", "sata-ecc";

Again, same problem. The drivers/ata/sata_ceva.c driver calls
dev_read_resource_byname(dev, "ecc-addr") (but not for "sata-base",
apparently).

If you don't want to convert all occurrences of "ecc-addr" to
"sata-ecc", then at least add a fallback call to dev_read_resource_byname.