[PATCH v2 4/4] riscv: Enable da9063 sysreset driver on HiFive Unmatched

[Alexandre Ghiti]

The Unmatched board comes with the da9063 PMIC that is used to reset the
board: add this driver in its config and a corresponding entry to its
device-tree.

Signed-off-by: Alexandre Ghiti <alexandre.ghiti at canonical.com>
---
 arch/riscv/dts/hifive-unmatched-a00.dts | 4 ++++
 configs/sifive_unmatched_defconfig      | 2 ++
 2 files changed, 6 insertions(+)

diff --git a/arch/riscv/dts/hifive-unmatched-a00.dts b/arch/riscv/dts/hifive-unmatched-a00.dts
index b44e8c160d..9c30a5c938 100644
--- a/arch/riscv/dts/hifive-unmatched-a00.dts
+++ b/arch/riscv/dts/hifive-unmatched-a00.dts
@@ -76,6 +76,10 @@
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 
+		reset {
+			compatible = "dlg,da9063-reset";
+		};
+
 		regulators {
 			vdd_bcore1: bcore1 {
 				regulator-min-microvolt = <1050000>;
diff --git a/configs/sifive_unmatched_defconfig b/configs/sifive_unmatched_defconfig
index 38b7acd536..a4bcf0fae6 100644
--- a/configs/sifive_unmatched_defconfig
+++ b/configs/sifive_unmatched_defconfig
@@ -37,3 +37,5 @@ CONFIG_DM_RESET=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_PCI=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_DA9063=y
-- 
2.30.2