[PATCH v2 0/4] Add reset support to HiFive Unmatched

[Alexandre Ghiti]

As there is no GPIO to reset the HiFive Unmatched board, we must directly        
ask the da9063 PMIC for a reset: this small patchset adds the corresponding      
sysreset driver and enables it for this board.                                   
                                                                                 
As the probing of this new device depends on a device-tree node, this            
series also adds the device tree bindings documentation for the da9063           
device.                                                                          
                                                                                 
Changes in v2:                                                                   
- Add device tree probing as suggested by Heinrich                               
- Rebased onto master 

Alexandre Ghiti (4):
  dt-bindings: power: Add da9063 PMIC device bindings
  dt-bindings: power: Add new da9063 sysreset subdevice bindings
  drivers: pmic: Add sysreset driver for da9063 PMIC
  riscv: Enable da9063 sysreset driver on HiFive Unmatched

 arch/riscv/dts/hifive-unmatched-a00.dts   |  4 ++
 configs/sifive_unmatched_defconfig        |  2 +
 doc/device-tree-bindings/power/da9063.txt | 68 +++++++++++++++++++++++
 drivers/power/pmic/da9063.c               | 51 ++++++++++++++++-
 include/power/da9063_pmic.h               |  1 +
 5 files changed, 125 insertions(+), 1 deletion(-)
 create mode 100644 doc/device-tree-bindings/power/da9063.txt

-- 
2.30.2