[PATCH u-boot-marvell] arm: a37xx: pci: Don't spam about PIO Response Status

[Marek Behún]

Use dev_dbg() instead of dev_err() in pcie_advk_check_pio_status().

For example CRS is not an error status, it just says that the request
should be retried.

Without this, U-Boot spams the terminal with
  pcie_advk pcie at d0070000: Non-posted PIO Response Status: UR, 0xc80 @ 0x100000
  pcie_advk pcie at d0070000: Non-posted PIO Response Status: UR, 0xc80 @ 0x108000
  pcie_advk pcie at d0070000: Non-posted PIO Response Status: UR, 0xc80 @ 0x110000
  pcie_advk pcie at d0070000: Non-posted PIO Response Status: UR, 0xc80 @ 0x120000
  pcie_advk pcie at d0070000: Non-posted PIO Response Status: UR, 0xc80 @ 0x128000
  pcie_advk pcie at d0070000: Non-posted PIO Response Status: UR, 0xc80 @ 0x130000
  ...
when a device is not connected to a PCIe switch (Unsupported Request
from the switch).

Signed-off-by: Marek Behún <marek.behun at nic.cz>
---
 drivers/pci/pci-aardvark.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/pci-aardvark.c b/drivers/pci/pci-aardvark.c
index 74797e984c..cf6e30f936 100644
--- a/drivers/pci/pci-aardvark.c
+++ b/drivers/pci/pci-aardvark.c
@@ -327,7 +327,7 @@ static int pcie_advk_check_pio_status(struct pcie_advk *pcie,
 	else
 		str_posted = "Posted";
 
-	dev_err(pcie->dev, "%s PIO Response Status: %s, %#x @ %#x\n",
+	dev_dbg(pcie->dev, "%s PIO Response Status: %s, %#x @ %#x\n",
 		str_posted, strcomp_status, reg,
 		advk_readl(pcie, PIO_ADDR_LS));
 
-- 
2.32.0