[PATCH 20/35] binman: Support updating the dtb in an ELF file
Simon Glass
sjg at chromium.org
Wed Sep 8 15:33:50 CEST 2021
WIth EFI we must embed the devicetree in an ELF image so that it is loaded
as part of the executable file. We want it to include the binman
definition in there also, which in some cases cannot be created until the
ELF (u-boot) is built. Add an option to binman to support writing the
updated dtb to the ELF file u-boot.out
This is useful with the EFI app, which is always packaged as an ELF file.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
tools/binman/binman.rst | 36 ++++++++++
tools/binman/cmdline.py | 2 +
tools/binman/control.py | 11 +++
tools/binman/elf.py | 21 ++++++
tools/binman/ftest.py | 83 +++++++++++++++++++++-
tools/binman/test/Makefile | 10 ++-
tools/binman/test/u_boot_binman_embed.c | 13 ++++
tools/binman/test/u_boot_binman_embed.lds | 29 ++++++++
tools/binman/test/u_boot_binman_embed_sm.c | 13 ++++
9 files changed, 216 insertions(+), 2 deletions(-)
create mode 100644 tools/binman/test/u_boot_binman_embed.c
create mode 100644 tools/binman/test/u_boot_binman_embed.lds
create mode 100644 tools/binman/test/u_boot_binman_embed_sm.c
diff --git a/tools/binman/binman.rst b/tools/binman/binman.rst
index 09e7b571982..e2c7083722d 100644
--- a/tools/binman/binman.rst
+++ b/tools/binman/binman.rst
@@ -822,6 +822,42 @@ the 'warning' line in scripts/Makefile.lib to see what it has found::
# u_boot_dtsi_options_debug = $(u_boot_dtsi_options_raw)
+Updating an ELF file
+====================
+
+For the EFI app, where U-Boot is loaded from UEFI and runs as an app, there is
+no way to update the devicetree after U-Boot is built. Normally this works by
+creating a new u-boot.dtb.out with he updated devicetree, which is automatically
+built into the output image. With ELF this is not possible since the ELF is
+not part of an image, just a stand-along file. We must create an updated ELF
+file with the new devicetree.
+
+This is handled by the --update-fdt-in-elf option. It takes four arguments,
+separated by comma:
+
+ infile - filename of input ELF file, e.g. 'u-boot's
+ outfile - filename of output ELF file, e.g. 'u-boot.out'
+ begin_sym - symbol at the start of the embedded devicetree, e.g.
+ '__dtb_dt_begin'
+ end_sym - symbol at the start of the embedded devicetree, e.g.
+ '__dtb_dt_end'
+
+When this flag is used, U-Boot does all the normal packaging, but as an
+additional step, it creates a new ELF file with the new devicetree embedded in
+it.
+
+If logging is enabled you will see a message like this::
+
+ Updating file 'u-boot' with data length 0x400a (16394) between symbols
+ '__dtb_dt_begin' and '__dtb_dt_end'
+
+There must be enough space for the updated devicetree. If not, an error like
+the following is produced::
+
+ ValueError: Not enough space in 'u-boot' for data length 0x400a (16394);
+ size is 0x1744 (5956)
+
+
Entry Documentation
===================
diff --git a/tools/binman/cmdline.py b/tools/binman/cmdline.py
index d6156df408b..23729f16dcc 100644
--- a/tools/binman/cmdline.py
+++ b/tools/binman/cmdline.py
@@ -71,6 +71,8 @@ controlled by a description in the board device tree.'''
'given')
build_parser.add_argument('-u', '--update-fdt', action='store_true',
default=False, help='Update the binman node with offset/size info')
+ build_parser.add_argument('--update-fdt-in-elf', type=str,
+ help='Update an ELF file with the output dtb: infile,outfile,begin_sym,end_sym')
entry_parser = subparsers.add_parser('entry-docs',
help='Write out entry documentation (see entries.rst)')
diff --git a/tools/binman/control.py b/tools/binman/control.py
index dcba02ff7f8..e73bc55252c 100644
--- a/tools/binman/control.py
+++ b/tools/binman/control.py
@@ -598,6 +598,13 @@ def Binman(args):
tools.FinaliseOutputDir()
return 0
+ elf_params = None
+ if args.update_fdt_in_elf:
+ elf_params = args.update_fdt_in_elf.split(',')
+ if len(elf_params) != 4:
+ raise ValueError('Invalid args %s to --update-fdt-in-elf: expected infile,outfile,begin_sym,end_sym' %
+ elf_params)
+
# Try to figure out which device tree contains our image description
if args.dt:
dtb_fname = args.dt
@@ -644,6 +651,10 @@ def Binman(args):
for dtb_item in state.GetAllFdts():
tools.WriteFile(dtb_item._fname, dtb_item.GetContents())
+ if elf_params:
+ data = state.GetFdtForEtype('u-boot-dtb').GetContents()
+ elf.UpdateFile(*elf_params, data)
+
if missing:
tout.Warning("\nSome images are invalid")
diff --git a/tools/binman/elf.py b/tools/binman/elf.py
index 4aca4f847ce..de2bb4651fa 100644
--- a/tools/binman/elf.py
+++ b/tools/binman/elf.py
@@ -348,3 +348,24 @@ def DecodeElf(data, location):
segment.data()[offset:])
return ElfInfo(output, data_start, elf.header['e_entry'] + virt_to_phys,
mem_end - data_start)
+
+def UpdateFile(infile, outfile, start_sym, end_sym, insert):
+ tout.Notice("Creating file '%s' with data length %#x (%d) between symbols '%s' and '%s'" %
+ (outfile, len(insert), len(insert), start_sym, end_sym))
+ syms = GetSymbolFileOffset(infile, [start_sym, end_sym])
+ if len(syms) != 2:
+ raise ValueError("Expected two symbols '%s' and '%s': got %d: %s" %
+ (start_sym, end_sym, len(syms),
+ ','.join(syms.keys())))
+
+ size = syms[end_sym].offset - syms[start_sym].offset
+ if len(insert) > size:
+ raise ValueError("Not enough space in '%s' for data length %#x (%d); size is %#x (%d)" %
+ (infile, len(insert), len(insert), size, size))
+
+ data = tools.ReadFile(infile)
+ newdata = data[:syms[start_sym].offset]
+ newdata += insert + tools.GetBytes(0, size - len(insert))
+ newdata += data[syms[end_sym].offset:]
+ tools.WriteFile(outfile, newdata)
+ tout.Info('Written to offset %#x' % syms[start_sym].offset)
diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
index 39a4b94cd0b..6be003786e8 100644
--- a/tools/binman/ftest.py
+++ b/tools/binman/ftest.py
@@ -309,7 +309,7 @@ class TestFunctional(unittest.TestCase):
entry_args=None, images=None, use_real_dtb=False,
use_expanded=False, verbosity=None, allow_missing=False,
extra_indirs=None, threads=None,
- test_section_timeout=False):
+ test_section_timeout=False, update_fdt_in_elf=None):
"""Run binman with a given test file
Args:
@@ -336,6 +336,7 @@ class TestFunctional(unittest.TestCase):
single-threaded)
test_section_timeout: True to force the first time to timeout, as
used in testThreadTimeout()
+ update_fdt_in_elf: Value to pass with --update-fdt-in-elf=xxx
Returns:
int return code, 0 on success
@@ -368,6 +369,8 @@ class TestFunctional(unittest.TestCase):
args.append('-a%s=%s' % (arg, value))
if allow_missing:
args.append('-M')
+ if update_fdt_in_elf:
+ args += ['--update-fdt-in-elf', update_fdt_in_elf]
if images:
for image in images:
args += ['-i', image]
@@ -4580,6 +4583,84 @@ class TestFunctional(unittest.TestCase):
self.assertIn('read:', stdout.getvalue())
self.assertIn('compress:', stdout.getvalue())
+ def testUpdateFdtInElf(self):
+ """Test that we can update the devicetree in an ELF file"""
+ infile = elf_fname = self.ElfTestFile('u_boot_binman_embed')
+ outfile = os.path.join(self._indir, 'u-boot.out')
+ begin_sym = 'dtb_embed_begin'
+ end_sym = 'dtb_embed_end'
+ retcode = self._DoTestFile(
+ '060_fdt_update.dts', update_dtb=True,
+ update_fdt_in_elf=','.join([infile,outfile,begin_sym,end_sym]))
+ self.assertEqual(0, retcode)
+
+ # Check that the output file does in fact contact a dtb with the binman
+ # definition in the correct place
+ syms = elf.GetSymbolFileOffset(infile,
+ ['dtb_embed_begin', 'dtb_embed_end'])
+ data = tools.ReadFile(outfile)
+ dtb_data = data[syms['dtb_embed_begin'].offset:
+ syms['dtb_embed_end'].offset]
+
+ dtb = fdt.Fdt.FromData(dtb_data)
+ dtb.Scan()
+ props = self._GetPropTree(dtb, BASE_DTB_PROPS + REPACK_DTB_PROPS)
+ self.assertEqual({
+ 'image-pos': 0,
+ 'offset': 0,
+ '_testing:offset': 32,
+ '_testing:size': 2,
+ '_testing:image-pos': 32,
+ 'section at 0/u-boot:offset': 0,
+ 'section at 0/u-boot:size': len(U_BOOT_DATA),
+ 'section at 0/u-boot:image-pos': 0,
+ 'section at 0:offset': 0,
+ 'section at 0:size': 16,
+ 'section at 0:image-pos': 0,
+
+ 'section at 1/u-boot:offset': 0,
+ 'section at 1/u-boot:size': len(U_BOOT_DATA),
+ 'section at 1/u-boot:image-pos': 16,
+ 'section at 1:offset': 16,
+ 'section at 1:size': 16,
+ 'section at 1:image-pos': 16,
+ 'size': 40
+ }, props)
+
+ def testUpdateFdtInElfInvalid(self):
+ """Test that invalid args are detected with --update-fdt-in-elf"""
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('060_fdt_update.dts', update_fdt_in_elf='fred')
+ self.assertIn("Invalid args ['fred'] to --update-fdt-in-elf",
+ str(e.exception))
+
+ def testUpdateFdtInElfNoSyms(self):
+ """Test that missing symbols are detected with --update-fdt-in-elf"""
+ infile = elf_fname = self.ElfTestFile('u_boot_binman_embed')
+ outfile = ''
+ begin_sym = 'wrong_begin'
+ end_sym = 'wrong_end'
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile(
+ '060_fdt_update.dts',
+ update_fdt_in_elf=','.join([infile,outfile,begin_sym,end_sym]))
+ self.assertIn("Expected two symbols 'wrong_begin' and 'wrong_end': got 0:",
+ str(e.exception))
+
+ def testUpdateFdtInElfTooSmall(self):
+ """Test that an over-large dtb is detected with --update-fdt-in-elf"""
+ infile = elf_fname = self.ElfTestFile('u_boot_binman_embed_sm')
+ outfile = os.path.join(self._indir, 'u-boot.out')
+ begin_sym = 'dtb_embed_begin'
+ end_sym = 'dtb_embed_end'
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile(
+ '060_fdt_update.dts', update_dtb=True,
+ update_fdt_in_elf=','.join([infile,outfile,begin_sym,end_sym]))
+ self.assertRegex(
+ str(e.exception),
+ "Not enough space in '.*u_boot_binman_embed_sm' for data length.*")
+
if __name__ == "__main__":
unittest.main()
diff --git a/tools/binman/test/Makefile b/tools/binman/test/Makefile
index 6e6cc6de491..387ba163353 100644
--- a/tools/binman/test/Makefile
+++ b/tools/binman/test/Makefile
@@ -28,10 +28,12 @@ LDS_UCODE := -T $(SRC)u_boot_ucode_ptr.lds
LDS_BINMAN := -T $(SRC)u_boot_binman_syms.lds
LDS_BINMAN_BAD := -T $(SRC)u_boot_binman_syms_bad.lds
LDS_BINMAN_X86 := -T $(SRC)u_boot_binman_syms_x86.lds
+LDS_BINMAN_EMBED := -T $(SRC)u_boot_binman_embed.lds
TARGETS = u_boot_ucode_ptr u_boot_no_ucode_ptr bss_data \
u_boot_binman_syms u_boot_binman_syms.bin u_boot_binman_syms_bad \
- u_boot_binman_syms_size u_boot_binman_syms_x86 embed_data
+ u_boot_binman_syms_size u_boot_binman_syms_x86 embed_data \
+ u_boot_binman_embed u_boot_binman_embed_sm
all: $(TARGETS)
@@ -62,6 +64,12 @@ u_boot_binman_syms_bad: u_boot_binman_syms_bad.c
u_boot_binman_syms_size: CFLAGS += $(LDS_BINMAN)
u_boot_binman_syms_size: u_boot_binman_syms_size.c
+u_boot_binman_embed: CFLAGS += $(LDS_BINMAN_EMBED)
+u_boot_binman_embed: u_boot_binman_embed.c
+
+u_boot_binman_embed_sm: CFLAGS += $(LDS_BINMAN_EMBED)
+u_boot_binman_embed_sm: u_boot_binman_embed_sm.c
+
clean:
rm -f $(TARGETS)
diff --git a/tools/binman/test/u_boot_binman_embed.c b/tools/binman/test/u_boot_binman_embed.c
new file mode 100644
index 00000000000..75874bb6e23
--- /dev/null
+++ b/tools/binman/test/u_boot_binman_embed.c
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Google LLC
+ *
+ * Simple program to embed a devicetree. This is used by binman tests.
+ */
+
+int __attribute__((section(".mydtb"))) dtb_data[4096];
+
+int main(void)
+{
+ return 0;
+}
diff --git a/tools/binman/test/u_boot_binman_embed.lds b/tools/binman/test/u_boot_binman_embed.lds
new file mode 100644
index 00000000000..e213fa8a84c
--- /dev/null
+++ b/tools/binman/test/u_boot_binman_embed.lds
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2016 Google, Inc
+ */
+
+OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
+OUTPUT_ARCH(i386)
+ENTRY(_start)
+
+SECTIONS
+{
+ . = 0x00000000;
+ _start = .;
+
+ . = ALIGN(4);
+ .text :
+ {
+ *(.text*)
+ }
+
+ . = ALIGN(4);
+ .data : {
+ dtb_embed_begin = .;
+ KEEP(*(.mydtb));
+ dtb_embed_end = .;
+ }
+ .interp : { *(.interp*) }
+
+}
diff --git a/tools/binman/test/u_boot_binman_embed_sm.c b/tools/binman/test/u_boot_binman_embed_sm.c
new file mode 100644
index 00000000000..ae245d78a6a
--- /dev/null
+++ b/tools/binman/test/u_boot_binman_embed_sm.c
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Google LLC
+ *
+ * Simple program to embed a devicetree. This is used by binman tests.
+ */
+
+int __attribute__((section(".mydtb"))) dtb_data[16];
+
+int main(void)
+{
+ return 0;
+}
--
2.33.0.153.gba50c8fa24-goog
More information about the U-Boot
mailing list