[PATCH 2/2] board: dh_stm32mp1: Remove gpio_hog_probe_all() from board

[Marek Vasut]

On 9/1/21 11:51 AM, Patrice Chotard wrote:
> DM_GPIO_HOG flag has been replaced by GPIO_HOG flag since a while in
> commit 49b10cb49262 ("gpio: fixes for gpio-hog support").
> 
> And furthermore, gpio_hog_probe_all() is already called in board_r.c.
> So gpio_hog_probe() can be removed from stm32mp1.c.
> 
> Signed-off-by: Patrice Chotard <patrice.chotard at foss.st.com>
> Cc: Marek Vasut <marex at denx.de>
> ---
> 
>   board/dhelectronics/dh_stm32mp1/board.c | 3 ---
>   1 file changed, 3 deletions(-)
> 
> diff --git a/board/dhelectronics/dh_stm32mp1/board.c b/board/dhelectronics/dh_stm32mp1/board.c
> index d7c1857c16..725b438d76 100644
> --- a/board/dhelectronics/dh_stm32mp1/board.c
> +++ b/board/dhelectronics/dh_stm32mp1/board.c
> @@ -593,9 +593,6 @@ int board_init(void)
>   	/* address of boot parameters */
>   	gd->bd->bi_boot_params = STM32_DDR_BASE + 0x100;
>   
> -	if (CONFIG_IS_ENABLED(DM_GPIO_HOG))
> -		gpio_hog_probe_all();
> -
>   	board_key_check();

This is likely OK, yes.