[PATCH] rtc: rv8803: add epson, rx8803 and epson, rx8900 compatible

[Michael Walle]

Am 23. September 2021 10:10:27 MESZ schrieb Heiko Thiery <heiko.thiery at gmail.com>:
>The RX8803 and RX8900 register layouts are compatible with the one of
>the RV8803. So add these to the compatibles.
>
>Signed-off-by: Heiko Thiery <heiko.thiery at gmail.com>
>---
>The RX8900 RTC is placed on the imx8mm-kontron-n801x-s board and was tested
>there.
>
> drivers/rtc/rv8803.c | 2 ++
> 1 file changed, 2 insertions(+)
>
>diff --git a/drivers/rtc/rv8803.c b/drivers/rtc/rv8803.c
>index acd50c6564..5bae39d6e0 100644
>--- a/drivers/rtc/rv8803.c
>+++ b/drivers/rtc/rv8803.c
>@@ -157,6 +157,8 @@ static const struct rtc_ops rv8803_rtc_ops = {
> 
> static const struct udevice_id rv8803_rtc_ids[] = {
> 	{ .compatible = "microcrystal,rv8803", },
>+	{ .compatible = "epson,rx8803" },
>+	{ .compatible = "epson,rx8900" },

You should mention that these compatible strings are already approved in Linux (and even for the rv8803 driver in Linux, too). So we don't use different compatibles in u-boot and Linux. 

With that fixed:

Reviewed-by: Michael Walle <michael at walle.cc>