[GIT PULL] rpi: updates for v2021.10

[Vincent Fazio]

Peter,

On 9/15/21 11:32 AM, Peter Robinson wrote:
> On Wed, Sep 15, 2021 at 4:40 PM Matthias Brugger <mbrugger at suse.com> wrote:
>> Hi Tom,
>>
>> I know, quite a bit late but here come the updates for RPi for v2021.10.
>> Actually most of the patches are fixes.
>>
>> Ivan's patch fixes a kernel warning when booting RPi2, as the firmware already
>> provides a frambebuffer node.
>>
>> Marek's patch fixes random crashes on 32 bit RPi4 with newer firmware.
>>
>> My SMBIOS patchesfixes an issue that show up with
>> e4f8e543f1 ("smbios: Drop the unused Kconfig options").
>> Basically the SMBIOS table broke and wasn't readable anymore.
>>
>> I think we can argue if the last one is a real fix. In case you just want to
>> take the first two so late in the cycle, let me know and I can provide you with
>> a separate pull request.
> It would also be good to get these[1] , although it doesn't seem like
> they were also posted to the list. It fixes a regression with U-Boot
> and recent RPi firmwares [2] so will likely come up sooner rather than
> later post release.
>
> Peter

I did send these to the u-boot list but received an "awaiting moderator 
approval" response.

Is there a different list i should have submitted this to, just for 
future reference?

> [1] https://patchwork.ozlabs.org/project/uboot/list/?series=262375
> [2] https://github.com/raspberrypi/firmware/issues/1619
>
>> Regards,
>> Matthias
>>
>> ---
>>
>> The following changes since commit bb92678ced0b1594b93ab2f10b2c17750c789c96:
>>
>>
>>
>>     Prepare v2021.10-rc4 (2021-09-14 18:58:10 -0400)
>>
>>
>>
>> are available in the Git repository at:
>>
>>
>>
>>     https://source.denx.de/u-boot/custodians/u-boot-raspberrypi.git/ rpi-next
>>
>>
>>
>> for you to fetch changes up to acc6987e59137485dbac0ee4a07cc349210954f3:
>>
>>
>>
>>     rpi: Conditionally add simple-framebuffer node (2021-09-15 13:34:06 +0200)
>>
>>
>>
>> ----------------------------------------------------------------
>>
>> Ivan T. Ivanov (1):
>>
>>         rpi: Conditionally add simple-framebuffer node
>>
>>
>>
>> Marek Szyprowski (1):
>>
>>         ARM: bcm283x: change the virtual address of the XHCI PCI device base
>>
>>
>>
>> Matthias Brugger (2):
>>
>>         arm: dts: bcm283x: Add minimal smbios information
>>
>>         configs: rpi: Enable SMBIOS sysinfo driver
>>
>>
>>
>>    arch/arm/dts/bcm283x-u-boot.dtsi | 19 +++++++++++++++++++
>>
>>    arch/arm/mach-bcm283x/init.c     |  4 ++--
>>
>>    board/raspberrypi/rpi/rpi.c      | 11 +++++------
>>
>>    configs/rpi_0_w_defconfig        |  2 ++
>>
>>    configs/rpi_2_defconfig          |  2 ++
>>
>>    configs/rpi_3_32b_defconfig      |  2 ++
>>
>>    configs/rpi_3_b_plus_defconfig   |  2 ++
>>
>>    configs/rpi_3_defconfig          |  2 ++
>>
>>    configs/rpi_4_32b_defconfig      |  2 ++
>>
>>    configs/rpi_4_defconfig          |  2 ++
>>
>>    configs/rpi_arm64_defconfig      |  2 ++
>>
>>    configs/rpi_defconfig            |  2 ++
>>
>>    12 files changed, 44 insertions(+), 8 deletions(-)
>>
-- 
Vincent Fazio
Embedded Software Engineer - ATS
Extreme Engineering Solutions, Inc
http://www.xes-inc.com