[PATCH 1/3] phy: marvell: a3700: Set TXDCLK_2X_SEL bit during PCIe initialization

[Pali Rohár]

On Friday 24 September 2021 16:18:46 Stefan Roese wrote:
> On 24.09.21 16:11, Pali Rohár wrote:
> > Marvell Armada 3700 Functional Specifications, section 52.2 PCIe Link
> > Initialization says that TXDCLK_2X_SEL bit needs to be enabled for PCIe
> > Root Complex mode.
> > 
> > Same change was included in TF-A project:
> > https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/9408
> > 
> > Signed-off-by: Pali Rohár <pali at kernel.org>
> 
> Did you experience some problems without this change?

I think I did not see problems neither with nor without this change.

Code just aligns with what is written in documentation guidelines.

> If yes, which?
> 
> Reviewed-by: Stefan Roese <sr at denx.de>
> 
> Thanks,
> Stefan
> 
> > ---
> >   drivers/phy/marvell/comphy_a3700.c | 2 +-
> >   drivers/phy/marvell/comphy_a3700.h | 1 +
> >   2 files changed, 2 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/phy/marvell/comphy_a3700.c b/drivers/phy/marvell/comphy_a3700.c
> > index 5eb137db4884..afa1295bbdb8 100644
> > --- a/drivers/phy/marvell/comphy_a3700.c
> > +++ b/drivers/phy/marvell/comphy_a3700.c
> > @@ -200,7 +200,7 @@ static int comphy_pcie_power_up(u32 speed, u32 invert)
> >   	 * 6. Enable the output of 100M/125M/500M clock
> >   	 */
> >   	reg_set16(phy_addr(PCIE, MISC_REG0),
> > -		  0xA00D | rb_clk500m_en | rb_clk100m_125m_en, 0xFFFF);
> > +		  0xA00D | rb_clk500m_en | rb_txdclk_2x_sel | rb_clk100m_125m_en, 0xFFFF);
> >   	/*
> >   	 * 7. Enable TX
> > diff --git a/drivers/phy/marvell/comphy_a3700.h b/drivers/phy/marvell/comphy_a3700.h
> > index 8748c6c84ae6..23c8ffbff44d 100644
> > --- a/drivers/phy/marvell/comphy_a3700.h
> > +++ b/drivers/phy/marvell/comphy_a3700.h
> > @@ -120,6 +120,7 @@ static inline void __iomem *phy_addr(enum phy_unit unit, u32 addr)
> >   #define MISC_REG0			0x4f
> >   #define rb_clk100m_125m_en		BIT(4)
> > +#define rb_txdclk_2x_sel		BIT(6)
> >   #define rb_clk500m_en			BIT(7)
> >   #define rb_ref_clk_sel			BIT(10)
> > 
> 
> 
> Viele Grüße,
> Stefan
> 
> -- 
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de