[PATCH v3 0/3] ARM: meson: add support for JetHub D1/H1
Vyacheslav Bocharov
adeep at lexina.in
Mon Sep 20 10:40:13 CEST 2021
Add support for new home automation devices manufactured by JetHome.
Patches prepared for use with the "ARM: meson: Sync Amlogic DT from Linux 5.14" patch series by Neil Armstrong
JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation controller with the following features:
- DIN Rail Mounting case
- Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
- 512Mb/1GB DDR3
- 8/16GB eMMC flash
- 1 x USB 2.0
- 1 x 10/100Mbps ethernet
- WiFi / Bluetooth AMPAK AP6255 (Broadcom BCM43455) IEEE 802.11a/b/g/n/ac, Bluetooth 4.2.
- TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support.
- 2 x gpio LEDS
- GPIO user Button
- 1 x 1-Wire
- 2 x RS-485
- 4 x dry contact digital GPIO inputs
- 3 x relay GPIO outputs
- DC source with a voltage of 9 to 56 V / Passive POE
JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation controller with the following features:
- Square plastic case
- Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
- 1GB DDR3
- 8/16GB eMMC flash
- 2 x USB 2.0
- 1 x 10/100Mbps ethernet
- WiFi / Bluetooth RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0.
- TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support.
- MicroSD 2.x/3.x/4.x DS/HS cards.
- 1 x gpio LED
- ADC user Button
- DC source 5V microUSB with serial console
Changes from v2:
- fix "Alignment should match open parenthesis" in board/amlogic/jethub-j80/jethub-j80.c
- add missing files to board/amlogic/jethub-j80/MAINTAINERS
- fix unexpected unindent in doc files
Changes from v1:
- fix BOOT_TARGET_DEVICES in jethub.h (patch 1/3)
- add lore URLs to description (patch 2/3)
Signed-off-by: Vyacheslav Bocharov <adeep at lexina.in>
Vyacheslav Bocharov (3):
ARM: amlogic: add JetHub common config header
ARM: amlogic: add JetHub D1/H1 device support
ARM: amlogic: add JetHub D1/H1 docs
arch/arm/dts/Makefile | 2 +
.../arm/dts/meson-axg-jethome-jethub-j100.dts | 361 ++++++++++++++++++
.../meson-gxl-s905w-jethome-jethub-j80.dts | 241 ++++++++++++
board/amlogic/jethub-j80/MAINTAINERS | 9 +
board/amlogic/jethub-j80/Makefile | 6 +
board/amlogic/jethub-j80/jethub-j80.c | 68 ++++
configs/jethub_j100_defconfig | 55 +++
configs/jethub_j80_defconfig | 63 +++
doc/board/amlogic/index.rst | 128 ++++---
doc/board/amlogic/jethub-j100.rst | 108 ++++++
doc/board/amlogic/jethub-j80.rst | 97 +++++
include/configs/jethub.h | 40 ++
12 files changed, 1115 insertions(+), 63 deletions(-)
create mode 100644 arch/arm/dts/meson-axg-jethome-jethub-j100.dts
create mode 100644 arch/arm/dts/meson-gxl-s905w-jethome-jethub-j80.dts
create mode 100644 board/amlogic/jethub-j80/MAINTAINERS
create mode 100644 board/amlogic/jethub-j80/Makefile
create mode 100644 board/amlogic/jethub-j80/jethub-j80.c
create mode 100644 configs/jethub_j100_defconfig
create mode 100644 configs/jethub_j80_defconfig
create mode 100644 doc/board/amlogic/jethub-j100.rst
create mode 100644 doc/board/amlogic/jethub-j80.rst
create mode 100644 include/configs/jethub.h
--
2.30.2
More information about the U-Boot
mailing list