[PATCH 3/3] ARM: amlogic: add JetHub D1/H1 docs
Neil Armstrong
narmstrong at baylibre.com
Sun Sep 19 16:28:52 CEST 2021
Hi,
Le 19/09/2021 à 10:18, Vyacheslav Bocharov a écrit :
> Fix doc/board/amlogic/index.rst:
> - Add S905W to S905X column.
> - Add JetHub devices to the corresponding columns.
> - Fix tabs to spaces for table alignment
>
> Add doc/board/amlogic files:
> - jethub-j100.rst
> - jethub-j80.rst
>
> Signed-off-by: Vyacheslav Bocharov <adeep at lexina.in>
> ---
> doc/board/amlogic/index.rst | 128 +++++++++++++++---------------
> doc/board/amlogic/jethub-j100.rst | 108 +++++++++++++++++++++++++
> doc/board/amlogic/jethub-j80.rst | 97 ++++++++++++++++++++++
> 3 files changed, 270 insertions(+), 63 deletions(-)
> create mode 100644 doc/board/amlogic/jethub-j100.rst
> create mode 100644 doc/board/amlogic/jethub-j80.rst
>
> diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst
> index 2913ab281a..c18f1b7e71 100644
> --- a/doc/board/amlogic/index.rst
> +++ b/doc/board/amlogic/index.rst
> @@ -10,69 +10,69 @@ An up-do-date matrix is also available on: http://linux-meson.com
>
> This matrix concerns the actual source code version.
>
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| | S905 | S905X | S912 | A113X | S905X2 | S922X | S905X3 |
> -| | | S805X | S905D | | S905D2 | A311D | S905D3 |
> -| | | | | | S905Y2 | | |
> -+===============================+===========+=================+==============+============+============+=============+==============+
> -| Boards | Odroid-C2 | P212 | Khadas VIM2 | S400 | U200 | Odroid-N2 | SEI610 |
> -| | Nanopi-K2 | Khadas-VIM | Libretech-PC | | SEI510 | Khadas-VIM3 | Khadas-VIM3L |
> -| | P200 | LibreTech-CC v1 | WeTek Core2 | | | GT-King/Pro | Odroid-C4 |
> -| | P201 | LibreTech-AC v2 | | | | GSKing-X | Odroid-HC4 |
> -| | | | | | | | BananaPi-M5 |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| Pinctrl/GPIO | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| Clock Control | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| PWM | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| Reset Control | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| Infrared Decoder | No | No | No | No | No | No | No |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| Ethernet | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| Multi-core | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| Fuse access | **Yes** | **Yes** |**Yes** |**Yes** |**Yes** |**Yes** | **Yes** |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| SPI (FC) | **Yes** | **Yes** | **Yes** | **Yes** |**Yes** | **Yes** | No |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| SPI (CC) | No | No | No | No | No | No | No |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| I2C | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| USB | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| USB OTG | No | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| eMMC | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| SDCard | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| NAND | No | No | No | No | No | No | No |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| ADC | **Yes** | **Yes** | **Yes** | No | No | No | No |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| CVBS Output | **Yes** | **Yes** | **Yes** | *N/A* | **Yes** | **Yes** | **Yes** |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| HDMI Output | **Yes** | **Yes** | **Yes** | *N/A* | **Yes** | **Yes** | **Yes** |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| CEC | No | No | No | *N/A* | No | No | No |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| Thermal Sensor | No | No | No | No | No | No | No |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| LCD/LVDS Output | No | *N/A* | No | No | No | No | No |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| MIPI DSI Output | *N/A* | *N/A* | *N/A* | No | No | No | No |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| SoC (version) information | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> -| PCIe (+NVMe) | *N/A* | *N/A* | *N/A* | **Yes** | **Yes** | **Yes** | **Yes** |
> -+-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| | S905 | S905X | S912 | A113X | S905X2 | S922X | S905X3 |
> +| | | S805X | S905D | | S905D2 | A311D | S905D3 |
> +| | | S905W | | | S905Y2 | | |
> ++===============================+===========+=================+==============+=============+============+=============+==============+
> +| Boards | Odroid-C2 | P212 | Khadas VIM2 | S400 | U200 | Odroid-N2 | SEI610 |
> +| | Nanopi-K2 | Khadas-VIM | Libretech-PC | JetHub J100 | SEI510 | Khadas-VIM3 | Khadas-VIM3L |
> +| | P200 | LibreTech-CC v1 | WeTek Core2 | | | GT-King/Pro | Odroid-C4 |
> +| | P201 | LibreTech-AC v2 | | | | GSKing-X | Odroid-HC4 |
> +| | | JetHub J80 | | | | | BananaPi-M5 |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| Pinctrl/GPIO | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| Clock Control | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| PWM | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| Reset Control | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| Infrared Decoder | No | No | No | No | No | No | No |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| Ethernet | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| Multi-core | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| Fuse access | **Yes** | **Yes** |**Yes** |**Yes** |**Yes** |**Yes** | **Yes** |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| SPI (FC) | **Yes** | **Yes** | **Yes** | **Yes** |**Yes** | **Yes** | No |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| SPI (CC) | No | No | No | No | No | No | No |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| I2C | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| USB | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| USB OTG | No | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| eMMC | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| SDCard | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| NAND | No | No | No | No | No | No | No |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| ADC | **Yes** | **Yes** | **Yes** | No | No | No | No |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| CVBS Output | **Yes** | **Yes** | **Yes** | *N/A* | **Yes** | **Yes** | **Yes** |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| HDMI Output | **Yes** | **Yes** | **Yes** | *N/A* | **Yes** | **Yes** | **Yes** |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| CEC | No | No | No | *N/A* | No | No | No |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| Thermal Sensor | No | No | No | No | No | No | No |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| LCD/LVDS Output | No | *N/A* | No | No | No | No | No |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| MIPI DSI Output | *N/A* | *N/A* | *N/A* | No | No | No | No |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| SoC (version) information | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
> +| PCIe (+NVMe) | *N/A* | *N/A* | *N/A* | **Yes** | **Yes** | **Yes** | **Yes** |
> ++-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+
>
> Board Documentation
> -------------------
> @@ -82,6 +82,8 @@ Board Documentation
>
> beelink-gtking
> beelink-gtkingpro
> + jethub-j100
> + jethub-j80
> khadas-vim2
> khadas-vim3l
> khadas-vim3
> diff --git a/doc/board/amlogic/jethub-j100.rst b/doc/board/amlogic/jethub-j100.rst
> new file mode 100644
> index 0000000000..f728711c5c
> --- /dev/null
> +++ b/doc/board/amlogic/jethub-j100.rst
> @@ -0,0 +1,108 @@
> +.. SPDX-License-Identifier: GPL-2.0+
> +
> +U-Boot for JetHub J100
> +=======================
> +
> +JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation
> +controller manufactured by JetHome with the following specifications:
> +
> + - Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz
> + - no video out
> + - 512Mb/1GB DDR3
> + - 8/16GB eMMC flash
> + - 1 x USB 2.0
> + - 1 x 10/100Mbps ethernet
> + - WiFi / Bluetooth AMPAK AP6255 (Broadcom BCM43455) IEEE
> +802.11a/b/g/n/ac, Bluetooth 4.2.
> + - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output
> +power and Zigbee 3.0 support.
> + - 2 x gpio LEDS
> + - GPIO user Button
> + - 1 x 1-Wire
> + - 2 x RS-485
> + - 4 x dry contact digital GPIO inputs
> + - 3 x relay GPIO outputs
> + - DC source with a voltage of 9 to 56 V / Passive POE
> + - DIN Rail Mounting case
> +
> +U-Boot compilation
> +------------------
> +
> +.. code-block:: bash
> +
> + $ export CROSS_COMPILE=aarch64-none-elf-
> + $ make jethub_j100_defconfig
> + $ make
> +
> +Image creation
> +--------------
> +
> +Amlogic doesn't provide sources for the firmware and for tools needed
> +to create the bootloader image, so it is necessary to obtain binaries
> +from the git tree published by the board vendor:
> +
> +.. code-block:: bash
> +
> + $ git clone https://github.com/jethome-ru/jethub-aml-tools jethub-u-boot
> + $ cd jethub-u-boot
> + $ export FIPDIR=$PWD
> +
> +Go back to mainline U-boot source tree then :
> +
> +.. code-block:: bash
> +
> + $ mkdir fip
> +
> + $ cp $FIPDIR/j100/bl2.bin fip/
> + $ cp $FIPDIR/j100/acs.bin fip/
> + $ cp $FIPDIR/j100/bl21.bin fip/
> + $ cp $FIPDIR/j100/bl30.bin fip/
> + $ cp $FIPDIR/j100/bl301.bin fip/
> + $ cp $FIPDIR/j100/bl31.img fip/
> + $ cp u-boot.bin fip/bl33.bin
> +
> + $ $FIPDIR/blx_fix.sh \
> + fip/bl30.bin \
> + fip/zero_tmp \
> + fip/bl30_zero.bin \
> + fip/bl301.bin \
> + fip/bl301_zero.bin \
> + fip/bl30_new.bin \
> + bl30
> +
> + $ $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
> +
> + $ $FIPDIR/blx_fix.sh \
> + fip/bl2_acs.bin \
> + fip/zero_tmp \
> + fip/bl2_zero.bin \
> + fip/bl21.bin \
> + fip/bl21_zero.bin \
> + fip/bl2_new.bin \
> + bl2
> +
> + $ $FIPDIR/j100/aml_encrypt_axg --bl3sig --input fip/bl30_new.bin \
> + --output fip/bl30_new.bin.enc \
> + --level v3 --type bl30
> + $ $FIPDIR/j100/aml_encrypt_axg --bl3sig --input fip/bl31.img \
> + --output fip/bl31.img.enc \
> + --level v3 --type bl31
> + $ $FIPDIR/j100/aml_encrypt_axg --bl3sig --input fip/bl33.bin --compress lz4 \
> + --output fip/bl33.bin.enc \
> + --level v3 --type bl33
> + $ $FIPDIR/j100/aml_encrypt_axg --bl2sig --input fip/bl2_new.bin \
> + --output fip/bl2.n.bin.sig
> + $ $FIPDIR/j100/aml_encrypt_axg --bootmk \
> + --output fip/u-boot.bin \
> + --bl2 fip/bl2.n.bin.sig \
> + --bl30 fip/bl30_new.bin.enc \
> + --bl31 fip/bl31.img.enc \
> + --bl33 fip/bl33.bin.enc --level v3
> +
> +and then write the image to eMMC with:
> +
> +.. code-block:: bash
> +
> + $ DEV=/dev/your_emmc_device
> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
> diff --git a/doc/board/amlogic/jethub-j80.rst b/doc/board/amlogic/jethub-j80.rst
> new file mode 100644
> index 0000000000..75a2136b20
> --- /dev/null
> +++ b/doc/board/amlogic/jethub-j80.rst
> @@ -0,0 +1,97 @@
> +.. SPDX-License-Identifier: GPL-2.0+
> +
> +U-Boot for JetHub J80
> +======================
> +
> +JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation
> +controller manufactured by JetHome with the following specifications:
> +
> + - Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz
> + - No video out
> + - 1GB DDR3
> + - 8/16GB eMMC flash
> + - 2 x USB 2.0
> + - 1 x 10/100Mbps ethernet
> + - SDIO WiFi / Bluetooth RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0.
> + - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output
> +power and Zigbee 3.0 support.
> + - MicroSD 2.x/3.x/4.x DS/HS cards.
> + - 1 x gpio LED
> + - ADC user Button
> + - DC source 5V microUSB
> + - Square plastic case
> +
> +U-Boot compilation
> +------------------
> +
> +.. code-block:: bash
> +
> + $ export CROSS_COMPILE=aarch64-none-elf-
> + $ make jethub_j80_defconfig
> + $ make
> +
> +Image creation
> +--------------
> +
> +Amlogic doesn't provide sources for the firmware and for tools needed
> +to create the bootloader image, so it is necessary to obtain binaries
> +from the git tree published by the board vendor:
> +
> +.. code-block:: bash
> +
> + $ git clone https://github.com/jethome-ru/jethub-aml-tools jethub-u-boot
> + $ cd jethub-u-boot
> + $ export FIPDIR=$PWD
> +
> +Go back to mainline U-Boot source tree then :
> +
> +.. code-block:: bash
> +
> + $ mkdir fip
> +
> + $ cp $FIPDIR/j80/bl2.bin fip/
> + $ cp $FIPDIR/j80/acs.bin fip/
> + $ cp $FIPDIR/j80/bl21.bin fip/
> + $ cp $FIPDIR/j80/bl30.bin fip/
> + $ cp $FIPDIR/j80/bl301.bin fip/
> + $ cp $FIPDIR/j80/bl31.img fip/
> + $ cp u-boot.bin fip/bl33.bin
> +
> + $ $FIPDIR/blx_fix.sh \
> + fip/bl30.bin \
> + fip/zero_tmp \
> + fip/bl30_zero.bin \
> + fip/bl301.bin \
> + fip/bl301_zero.bin \
> + fip/bl30_new.bin \
> + bl30
> +
> + $ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
> +
> + $ $FIPDIR/blx_fix.sh \
> + fip/bl2_acs.bin \
> + fip/zero_tmp \
> + fip/bl2_zero.bin \
> + fip/bl21.bin \
> + fip/bl21_zero.bin \
> + fip/bl2_new.bin \
> + bl2
> +
> + $ $FIPDIR/j80/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
> + $ $FIPDIR/j80/aml_encrypt_gxl --bl3enc --input fip/bl31.img
> + $ $FIPDIR/j80/aml_encrypt_gxl --bl3enc --input fip/bl33.bin --compress lz4
> + $ $FIPDIR/j80/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
> + $ $FIPDIR/j80/aml_encrypt_gxl --bootmk \
> + --output fip/u-boot.bin \
> + --bl2 fip/bl2.n.bin.sig \
> + --bl30 fip/bl30_new.bin.enc \
> + --bl31 fip/bl31.img.enc \
> + --bl33 fip/bl33.bin.enc
> +
> +and then write the image to SD/eMMC with:
> +
> +.. code-block:: bash
> +
> + $ DEV=/dev/your_sd_device
> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
>
Reviewed-by: Neil Armstrong <narmstrong at baylibre.com>
Thanks,
Neil
More information about the U-Boot
mailing list