[PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC
Tom Rini
trini at konsulko.com
Tue Sep 21 14:42:20 CEST 2021
On Sun, Sep 19, 2021 at 10:33:25PM +0200, Mark Kettenis wrote:
> > From: Bin Meng <bmeng.cn at gmail.com>
> > Date: Sun, 19 Sep 2021 09:17:07 +0800
> >
> > Hi Mark,
> >
> > On Sun, Sep 19, 2021 at 9:04 AM Bin Meng <bmeng.cn at gmail.com> wrote:
> > >
> > > Hi Mark,
> > >
> > > On Sat, Sep 18, 2021 at 9:55 PM Mark Kettenis <kettenis at openbsd.org> wrote:
> > > >
> > > > Add support for Apple's M1 SoC that is used in "Apple Silicon"
> > > > Macs. This builds a basic U-Boot that can be used as a payload
> > > > for the m1n1 boot loader being developed by the Asahi Linux
> > > > project.
> > > >
> > > > Signed-off-by: Mark Kettenis <kettenis at openbsd.org>
> > > > ---
> > > > arch/arm/Kconfig | 22 ++++
> > > > arch/arm/Makefile | 1 +
> > > > arch/arm/mach-apple/Kconfig | 18 ++++
> > > > arch/arm/mach-apple/Makefile | 4 +
> > > > arch/arm/mach-apple/board.c | 158 ++++++++++++++++++++++++++++
> > > > arch/arm/mach-apple/lowlevel_init.S | 16 +++
> > > > configs/apple_m1_defconfig | 14 +++
> > > > include/configs/apple.h | 38 +++++++
> > > > 8 files changed, 271 insertions(+)
> > > > create mode 100644 arch/arm/mach-apple/Kconfig
> > > > create mode 100644 arch/arm/mach-apple/Makefile
> > > > create mode 100644 arch/arm/mach-apple/board.c
> > > > create mode 100644 arch/arm/mach-apple/lowlevel_init.S
> > > > create mode 100644 configs/apple_m1_defconfig
> > > > create mode 100644 include/configs/apple.h
> > > >
> > > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > > > index b5bd3284cd..7cdea1f615 100644
> > > > --- a/arch/arm/Kconfig
> > > > +++ b/arch/arm/Kconfig
> > > > @@ -895,6 +895,26 @@ config ARCH_NEXELL
> > > > select DM
> > > > select GPIO_EXTRA_HEADER
> > > >
> > > > +config ARCH_APPLE
> > > > + bool "Apple SoCs"
> > > > + select ARM64
> > > > + select LINUX_KERNEL_IMAGE_HEADER
> > > > + select POSITION_INDEPENDENT
> > > > + select BLK
> > > > + select DM
> > > > + select DM_KEYBOARD
> > > > + select DM_SERIAL
> > > > + select DM_USB
> > > > + select DM_VIDEO
> > > > + select CMD_USB
> > > > + select MISC
> > > > + select OF_CONTROL
> > > > + select OF_BOARD
> > > > + select USB
> > > > + imply CMD_DM
> > > > + imply CMD_GPT
> > > > + imply DISTRO_DEFAULTS
> > > > +
> > > > config ARCH_OWL
> > > > bool "Actions Semi OWL SoCs"
> > > > select DM
> > > > @@ -1932,6 +1952,8 @@ config ISW_ENTRY_ADDR
> > > > image headers.
> > > > endif
> > > >
> > > > +source "arch/arm/mach-apple/Kconfig"
> > > > +
> > > > source "arch/arm/mach-aspeed/Kconfig"
> > > >
> > > > source "arch/arm/mach-at91/Kconfig"
> > > > diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> > > > index c68e598a67..44178c204b 100644
> > > > --- a/arch/arm/Makefile
> > > > +++ b/arch/arm/Makefile
> > > > @@ -51,6 +51,7 @@ PLATFORM_CPPFLAGS += $(arch-y) $(tune-y)
> > > >
> > > > # Machine directory name. This list is sorted alphanumerically
> > > > # by CONFIG_* macro name.
> > > > +machine-$(CONFIG_ARCH_APPLE) += apple
> > > > machine-$(CONFIG_ARCH_ASPEED) += aspeed
> > > > machine-$(CONFIG_ARCH_AT91) += at91
> > > > machine-$(CONFIG_ARCH_BCM283X) += bcm283x
> > > > diff --git a/arch/arm/mach-apple/Kconfig b/arch/arm/mach-apple/Kconfig
> > > > new file mode 100644
> > > > index 0000000000..66cab91b2a
> > > > --- /dev/null
> > > > +++ b/arch/arm/mach-apple/Kconfig
> > > > @@ -0,0 +1,18 @@
> > > > +if ARCH_APPLE
> > > > +
> > > > +config SYS_TEXT_BASE
> > > > + default 0x00000000
> > > > +
> > > > +config SYS_CONFIG_NAME
> > > > + default "apple"
> > > > +
> > > > +config SYS_SOC
> > > > + default "m1"
> > > > +
> > > > +config SYS_MALLOC_LEN
> > > > + default 0x4000000
> > > > +
> > > > +config SYS_MALLOC_F_LEN
> > > > + default 0x4000
> > > > +
> > > > +endif
> > > > diff --git a/arch/arm/mach-apple/Makefile b/arch/arm/mach-apple/Makefile
> > > > new file mode 100644
> > > > index 0000000000..e74a8c9df1
> > > > --- /dev/null
> > > > +++ b/arch/arm/mach-apple/Makefile
> > > > @@ -0,0 +1,4 @@
> > > > +# SPDX-License-Identifier: GPL-2.0+
> > > > +
> > > > +obj-y += board.o
> > > > +obj-y += lowlevel_init.o
> > > > diff --git a/arch/arm/mach-apple/board.c b/arch/arm/mach-apple/board.c
> > > > new file mode 100644
> > > > index 0000000000..0c8b35292e
> > > > --- /dev/null
> > > > +++ b/arch/arm/mach-apple/board.c
> > > > @@ -0,0 +1,158 @@
> > > > +// SPDX-License-Identifier: GPL-2.0+
> > > > +/*
> > > > + * (C) Copyright 2021 Mark Kettenis <kettenis at openbsd.org>
> > > > + */
> > > > +
> > > > +#include <common.h>
> > > > +#include <efi_loader.h>
> > > > +
> > > > +#include <asm/armv8/mmu.h>
> > > > +#include <asm/global_data.h>
> > > > +#include <asm/io.h>
> > > > +#include <asm/system.h>
> > > > +
> > > > +DECLARE_GLOBAL_DATA_PTR;
> > > > +
> > > > +static struct mm_region apple_mem_map[] = {
> > > > + {
> > > > + /* I/O */
> > > > + .virt = 0x200000000,
> > > > + .phys = 0x200000000,
> > > > + .size = 8UL * SZ_1G,
> > > > + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > > > + PTE_BLOCK_NON_SHARE |
> > > > + PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > + }, {
> > > > + /* I/O */
> > > > + .virt = 0x500000000,
> > > > + .phys = 0x500000000,
> > > > + .size = 2UL * SZ_1G,
> > > > + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > > > + PTE_BLOCK_NON_SHARE |
> > > > + PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > + }, {
> > > > + /* I/O */
> > > > + .virt = 0x680000000,
> > > > + .phys = 0x680000000,
> > > > + .size = SZ_512M,
> > > > + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > > > + PTE_BLOCK_NON_SHARE |
> > > > + PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > + }, {
> > > > + /* PCIE */
> > > > + .virt = 0x6a0000000,
> > > > + .phys = 0x6a0000000,
> > > > + .size = SZ_512M,
> > > > + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> > > > + PTE_BLOCK_INNER_SHARE |
> > > > + PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > + }, {
> > > > + /* PCIE */
> > > > + .virt = 0x6c0000000,
> > > > + .phys = 0x6c0000000,
> > > > + .size = SZ_1G,
> > > > + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> > > > + PTE_BLOCK_INNER_SHARE |
> > > > + PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > + }, {
> > > > + /* RAM */
> > > > + .virt = 0x800000000,
> > > > + .phys = 0x800000000,
> > > > + .size = 8UL * SZ_1G,
> > > > + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
> > > > + PTE_BLOCK_INNER_SHARE
> > > > + }, {
> > > > + /* Empty entry for framebuffer */
> > > > + 0,
> > > > + }, {
> > > > + /* List terminator */
> > > > + 0,
> > > > + }
> > > > +};
> > > > +
> > > > +struct mm_region *mem_map = apple_mem_map;
> > > > +
> > > > +int board_init(void)
> > > > +{
> > > > + return 0;
> > > > +}
> > > > +
> > > > +int dram_init(void)
> > > > +{
> > > > + int index, node, ret;
> > > > + fdt_addr_t base;
> > > > + fdt_size_t size;
> > > > +
> > > > + ret = fdtdec_setup_mem_size_base();
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + /* Update RAM mapping. */
> > >
> > > nits: please remove the ending .
> > >
> > > > + index = ARRAY_SIZE(apple_mem_map) - 3;
> >
> > This is error prone. Someone else updating apple_mem_map may create an
> > incorrect index for us.
>
> I don't see a better way without introducing more complexity.
>
> > > > + apple_mem_map[index].virt = gd->ram_base;
> > > > + apple_mem_map[index].phys = gd->ram_base;
> > > > + apple_mem_map[index].size = gd->ram_size;
> > > > +
> > > > + node = fdt_path_offset(gd->fdt_blob, "/chosen/framebuffer");
> > > > + if (node < 0)
> > > > + return 0;
> > > > +
> > > > + base = fdtdec_get_addr_size(gd->fdt_blob, node, "reg", &size);
> > > > + if (base == FDT_ADDR_T_NONE)
> > > > + return 0;
> > > > +
> > > > + /* Add framebuffer mapping. */
> > >
> > > ditto
> > >
> > > > + index = ARRAY_SIZE(apple_mem_map) - 2;
> > > > + apple_mem_map[index].virt = base;
> > > > + apple_mem_map[index].phys = base;
> > > > + apple_mem_map[index].size = size;
> > > > + apple_mem_map[index].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) |
> > > > + PTE_BLOCK_INNER_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN;
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +int dram_init_banksize(void)
> > > > +{
> > > > + return fdtdec_setup_memory_banksize();
> > > > +}
> > > > +
> > > > +#define APPLE_WDT_BASE 0x23d2b0000ULL
> > > > +
> > > > +#define APPLE_WDT_SYS_CTL_ENABLE BIT(2)
> > > > +
> > > > +typedef struct apple_wdt {
> > > > + u32 reserved0[3];
> > > > + u32 chip_ctl;
> > > > + u32 sys_tmr;
> > > > + u32 sys_cmp;
> > > > + u32 reserved1;
> > > > + u32 sys_ctl;
> > > > +} apple_wdt_t;
> > > > +
> > > > +void reset_cpu(void)
> > >
> > > This looks like we should add a new sysreset driver for Apple Arm SoC.
> > >
> > > > +{
> > > > + apple_wdt_t *wdt = (apple_wdt_t *)APPLE_WDT_BASE;
> > > > +
> > > > + writel(0, &wdt->sys_cmp);
> > > > + writel(APPLE_WDT_SYS_CTL_ENABLE, &wdt->sys_ctl);
> > > > +
> > > > + while(1)
> > > > + wfi();
> > > > +}
> > > > +
> > > > +extern long fw_dtb_pointer;
> > > > +
> > > > +void *board_fdt_blob_setup(void)
> > > > +{
> > > > + return (void *)fw_dtb_pointer;
> > > > +}
> > > > +
> > > > +ulong board_get_usable_ram_top(ulong total_size)
> > > > +{
> > > > + /*
> > > > + * Top part of RAM is used by firmware for things like the
> > > > + * framebuffer. This gives us plenty of room to play with.
> > > > + */
> > > > + return 0x980000000;
> > > > +}
> > > > diff --git a/arch/arm/mach-apple/lowlevel_init.S b/arch/arm/mach-apple/lowlevel_init.S
> > > > new file mode 100644
> > > > index 0000000000..0f5313163e
> > > > --- /dev/null
> > > > +++ b/arch/arm/mach-apple/lowlevel_init.S
> > > > @@ -0,0 +1,16 @@
> > > > +/* SPDX-License-Identifier: GPL-2.0+ */
> > > > +/*
> > > > + * (C) Copyright 2021 Mark Kettenis <kettenis at openbsd.org>
> > > > + */
> > > > +
> > > > +.align 8
> > > > +.global fw_dtb_pointer
> > > > +fw_dtb_pointer:
> > > > + .quad 0
> > >
> > > Is this filled in by m1n1?
> >
> > Sorry I misread, so this is passed by m1n1 and filled in by U-Boot. I
> > think we should stop using CONFIG_OF_BOARD, and for such case we
> > should use CONFIG_OF_PRIOR_STAGE.
>
> Yes, CONFIG_OF_PRIOR_STAGE would work as well. But Tom was talking
> about removing that option in favour of CONFIG_OF_BOARD the other day.
Yes. I was even looking for some feedback from you, Bin, on converting
some boards from CONFIG_OF_PRIOR_STAGE to CONFIG_OF_BOARD. It seems
like CONFIG_OF_PRIOR_STAGE is a subset of CONFIG_OF_BOARD, at the cost
of possibly a few bytes.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210921/62008927/attachment.sig>
More information about the U-Boot
mailing list