[PATCH 7/9] arm: dts: ls1021a-tsn: add sja1105 and eth2 bindings

[Ramon Fried]

On Tue, Sep 28, 2021 at 2:48 AM Vladimir Oltean <vladimir.oltean at nxp.com> wrote:
>
> The eth aliases are for correct probing order, so that each Ethernet
> port will get a predictable MAC address from the environment.
>
> Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
> ---
>  arch/arm/dts/ls1021a-tsn.dts | 103 +++++++++++++++++++++++++++++++++++
>  1 file changed, 103 insertions(+)
>
> diff --git a/arch/arm/dts/ls1021a-tsn.dts b/arch/arm/dts/ls1021a-tsn.dts
> index f633074099dc..48ad7d1ad5db 100644
> --- a/arch/arm/dts/ls1021a-tsn.dts
> +++ b/arch/arm/dts/ls1021a-tsn.dts
> @@ -14,6 +14,81 @@
>                 enet1-sgmii-phy = &sgmii_phy1;
>                 spi0 = &qspi;
>                 spi1 = &dspi1;
> +               ethernet0 = &enet0;
> +               ethernet1 = &enet1;
> +               ethernet2 = &enet2;
> +               ethernet3 = &swp2;
> +               ethernet4 = &swp3;
> +               ethernet5 = &swp4;
> +               ethernet6 = &swp5;
> +       };
> +};
> +
> +&dspi0 {
> +       bus-num = <0>;
> +       status = "okay";
> +
> +       sja1105: ethernet-switch at 1 {
> +               reg = <0x1>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               compatible = "nxp,sja1105t";
> +               /* 12 MHz */
> +               spi-max-frequency = <12000000>;
> +               /* Sample data on trailing clock edge */
> +               spi-cpha;
> +               /* SPI controller settings for SJA1105 timing requirements */
> +               fsl,spi-cs-sck-delay = <1000>;
> +               fsl,spi-sck-cs-delay = <1000>;
> +
> +               ports {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       swp5: port at 0 {
> +                               /* ETH5 written on chassis */
> +                               label = "swp5";
> +                               phy-handle = <&rgmii_phy6>;
> +                               phy-mode = "rgmii-id";
> +                               reg = <0>;
> +                       };
> +
> +                       swp2: port at 1 {
> +                               /* ETH2 written on chassis */
> +                               label = "swp2";
> +                               phy-handle = <&rgmii_phy3>;
> +                               phy-mode = "rgmii-id";
> +                               reg = <1>;
> +                       };
> +
> +                       swp3: port at 2 {
> +                               /* ETH3 written on chassis */
> +                               label = "swp3";
> +                               phy-handle = <&rgmii_phy4>;
> +                               phy-mode = "rgmii-id";
> +                               reg = <2>;
> +                       };
> +
> +                       swp4: port at 3 {
> +                               /* ETH4 written on chassis */
> +                               label = "swp4";
> +                               phy-handle = <&rgmii_phy5>;
> +                               phy-mode = "rgmii-id";
> +                               reg = <3>;
> +                       };
> +
> +                       port at 4 {
> +                               /* Internal port connected to eth2 */
> +                               ethernet = <&enet2>;
> +                               phy-mode = "rgmii";
> +                               reg = <4>;
> +
> +                               fixed-link {
> +                                       speed = <1000>;
> +                                       full-duplex;
> +                               };
> +                       };
> +               };
>         };
>  };
>
> @@ -31,6 +106,17 @@
>         status = "okay";
>  };
>
> +/* RGMII delays added via PCB traces */
> +&enet2 {
> +       phy-mode = "rgmii";
> +       status = "okay";
> +
> +       fixed-link {
> +               speed = <1000>;
> +               full-duplex;
> +       };
> +};
> +
>  &i2c0 {
>         status = "okay";
>  };
> @@ -46,6 +132,23 @@
>                 reg = <0x2>;
>         };
>
> +       /* BCM5464 quad PHY */
> +       rgmii_phy3: ethernet-phy at 3 {
> +               reg = <0x3>;
> +       };
> +
> +       rgmii_phy4: ethernet-phy at 4 {
> +               reg = <0x4>;
> +       };
> +
> +       rgmii_phy5: ethernet-phy at 5 {
> +               reg = <0x5>;
> +       };
> +
> +       rgmii_phy6: ethernet-phy at 6 {
> +               reg = <0x6>;
> +       };
> +
>         /* SGMII PCS for enet0 */
>         tbi0: tbi-phy at 1f {
>                 reg = <0x1f>;
> --
> 2.25.1
>
Reviewed-by: Ramon Fried <rfried.dev at gmail.com>