[PATCH] mmc: fsl_esdhc: remove 1ms sleep in esdhc_send_cmd_common()

[Jaehoon Chung]

Hi,

On 9/10/21 6:20 PM, Michael Walle wrote:
> Since the beginning of this driver which was initially for the MPC8379
> and MPC8536 SoCs, there is this spurious 1ms delay. According to the
> comment it should actually be only 8 clock cycles. Esp. during EFI block
> transfers, this 1ms add up to a significant delay and slows down EFI
> boot.
> 
> I couldn't find any mention in the MPC8536 that there should be a delay
> of 8 clock cycles between commands. The SD card specification mentions that
> the clock has to be left enabled for 8 cycles after a command or
> response. But I don't see how this delay will help with this.
> 
> Go ahead and just remove it. If there will ever be any regression we can
> introduce a compile time flag, but for now I'd like to keep it simple.
> 
> In the split off imx driver this delay was also removed in commit
> 9098682200e6 ("mmc: fsl_esdhc_imx: remove the 1ms delay before sending
> command").
> 
> Signed-off-by: Michael Walle <michael at walle.cc>


If someone can test with this patch, I think that it's more better.
But i don't have any objection to apply this patch.

Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com>

Best Regards,
Jaehoon Chung

> ---
>  drivers/mmc/fsl_esdhc.c | 7 -------
>  1 file changed, 7 deletions(-)
> 
> diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
> index 1d98fa65c4..ebb307e950 100644
> --- a/drivers/mmc/fsl_esdhc.c
> +++ b/drivers/mmc/fsl_esdhc.c
> @@ -361,13 +361,6 @@ static int esdhc_send_cmd_common(struct fsl_esdhc_priv *priv, struct mmc *mmc,
>  	while (esdhc_read32(&regs->prsstat) & PRSSTAT_DLA)
>  		;
>  
> -	/* Wait at least 8 SD clock cycles before the next command */
> -	/*
> -	 * Note: This is way more than 8 cycles, but 1ms seems to
> -	 * resolve timing issues with some cards
> -	 */
> -	udelay(1000);
> -
>  	/* Set up for a data transfer if we have one */
>  	if (data) {
>  		err = esdhc_setup_data(priv, mmc, data);
>