[PATCH] board/freescale/vid : move platform specific definitions

[Wasim Khan]

From: Wasim Khan <wasim.khan at nxp.com>

VID is a common driver. Move platform specific definitions
to platform specific header files

Signed-off-by: Wasim Khan <wasim.khan at nxp.com>
---
 board/freescale/common/vid.h     | 10 ----------
 include/configs/lx2160a_common.h |  7 +++++++
 2 files changed, 7 insertions(+), 10 deletions(-)

diff --git a/board/freescale/common/vid.h b/board/freescale/common/vid.h
index b34c080b4b..32e68fceb2 100644
--- a/board/freescale/common/vid.h
+++ b/board/freescale/common/vid.h
@@ -59,16 +59,6 @@
 #define PMBUS_CMD_VOUT_COMMAND          0x21
 #define PMBUS_CMD_PAGE_PLUS_WRITE       0x05
 
-#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS) || \
-defined(CONFIG_TARGET_LX2160ARDB)
-/* Voltage monitor on channel 2*/
-#define I2C_VOL_MONITOR_BUS_V_OFFSET	0x2
-#define I2C_VOL_MONITOR_BUS_V_OVF	0x1
-#define I2C_VOL_MONITOR_BUS_V_SHIFT	3
-#define I2C_VOL_MONITOR_ADDR            0x63
-#define I2C_MUX_CH_VOL_MONITOR		0xA
-#endif
-
 int adjust_vdd(ulong vdd_override);
 u16 soc_get_fuse_vid(int vid_index);
 
diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index 1ae7d37dd9..c2c4a8c7a1 100644
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -86,6 +86,13 @@
 #define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET	0x00F20000
 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS	5000
 
+/* Voltage monitor on channel 2*/
+#define I2C_VOL_MONITOR_BUS_V_OFFSET	0x2
+#define I2C_VOL_MONITOR_BUS_V_OVF	0x1
+#define I2C_VOL_MONITOR_BUS_V_SHIFT	3
+#define I2C_VOL_MONITOR_ADDR		0x63
+#define I2C_MUX_CH_VOL_MONITOR		0xA
+
 /* Define phy_reset function to boot the MC based on mcinitcmd.
  * This happens late enough to properly fixup u-boot env MAC addresses.
  */
-- 
2.25.1