[PATCH v2 10/23] sunxi: Remove non-DM GMAC pin setup

Andre Przywara andre.przywara at arm.com
Fri Apr 1 01:20:05 CEST 2022


On Thu, 17 Mar 2022 22:54:07 -0500
Samuel Holland <samuel at sholland.org> wrote:

> This is now handled automatically by the pinctrl driver.
> 
> Signed-off-by: Samuel Holland <samuel at sholland.org>

Yeah!

Reviewed-by: Andre Przywara <andre.przywara at arm.com>

Cheers,
Andre

> ---
> 
> (no changes since v1)
> 
>  arch/arm/include/asm/arch-sunxi/gpio.h |  2 -
>  board/sunxi/gmac.c                     | 55 --------------------------
>  2 files changed, 57 deletions(-)
> 
> diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
> index e93c9e84c9..2aa6bbb178 100644
> --- a/arch/arm/include/asm/arch-sunxi/gpio.h
> +++ b/arch/arm/include/asm/arch-sunxi/gpio.h
> @@ -135,8 +135,6 @@ enum sunxi_gpio_number {
>  #define SUNXI_GPIO_OUTPUT	1
>  #define SUNXI_GPIO_DISABLE	7
>  
> -#define SUN6I_GPA_GMAC		2
> -#define SUN7I_GPA_GMAC		5
>  #define SUN8I_H3_GPA_UART0	2
>  
>  #define SUN4I_GPB_PWM		2
> diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c
> index 1fa54ed72d..2a885305eb 100644
> --- a/board/sunxi/gmac.c
> +++ b/board/sunxi/gmac.c
> @@ -1,13 +1,11 @@
>  #include <common.h>
>  #include <netdev.h>
>  #include <miiphy.h>
> -#include <asm/gpio.h>
>  #include <asm/io.h>
>  #include <asm/arch/clock.h>
>  
>  void eth_init_board(void)
>  {
> -	int pin;
>  	struct sunxi_ccm_reg *const ccm =
>  		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
>  
> @@ -21,57 +19,4 @@ void eth_init_board(void)
>  	setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_MII |
>  		CCM_GMAC_CTRL_GPIT_MII);
>  #endif
> -
> -#ifndef CONFIG_MACH_SUN6I
> -	/* Configure pin mux settings for GMAC */
> -#ifdef CONFIG_SUN7I_GMAC_FORCE_TXERR
> -	for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++) {
> -#else
> -	for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) {
> -#endif
> -#ifdef CONFIG_RGMII
> -		/* skip unused pins in RGMII mode */
> -		if (pin == SUNXI_GPA(9) || pin == SUNXI_GPA(14))
> -			continue;
> -#endif
> -		sunxi_gpio_set_cfgpin(pin, SUN7I_GPA_GMAC);
> -		sunxi_gpio_set_drv(pin, 3);
> -	}
> -#elif defined CONFIG_RGMII
> -	/* Configure sun6i RGMII mode pin mux settings */
> -	for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(3); pin++) {
> -		sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
> -		sunxi_gpio_set_drv(pin, 3);
> -	}
> -	for (pin = SUNXI_GPA(9); pin <= SUNXI_GPA(14); pin++) {
> -		sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
> -		sunxi_gpio_set_drv(pin, 3);
> -	}
> -	for (pin = SUNXI_GPA(19); pin <= SUNXI_GPA(20); pin++) {
> -		sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
> -		sunxi_gpio_set_drv(pin, 3);
> -	}
> -	for (pin = SUNXI_GPA(25); pin <= SUNXI_GPA(27); pin++) {
> -		sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
> -		sunxi_gpio_set_drv(pin, 3);
> -	}
> -#elif defined CONFIG_GMII
> -	/* Configure sun6i GMII mode pin mux settings */
> -	for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(27); pin++) {
> -		sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
> -		sunxi_gpio_set_drv(pin, 2);
> -	}
> -#else
> -	/* Configure sun6i MII mode pin mux settings */
> -	for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(3); pin++)
> -		sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
> -	for (pin = SUNXI_GPA(8); pin <= SUNXI_GPA(9); pin++)
> -		sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
> -	for (pin = SUNXI_GPA(11); pin <= SUNXI_GPA(14); pin++)
> -		sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
> -	for (pin = SUNXI_GPA(19); pin <= SUNXI_GPA(24); pin++)
> -		sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
> -	for (pin = SUNXI_GPA(26); pin <= SUNXI_GPA(27); pin++)
> -		sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
> -#endif
>  }



More information about the U-Boot mailing list