April 2022 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Fri Apr 1 01:18:30 CEST 2022
Ending: Sat Apr 30 20:44:21 CEST 2022
Messages: 3248

• [PATCH V2 00/26] imx: imx8ulp: misc update from downstream   Peng Fan (OSS)
• [PATCH V2 01/26] imx: imx8ulp: Set COUNTER_FREQUENCY to 1Mhz   Peng Fan (OSS)
• [PATCH V2 02/26] imx: imx8ulp: include pcc/cgc header in clock header   Peng Fan (OSS)
• [PATCH V2 03/26] imx: imx8ulp: Add M33 handshake functions   Peng Fan (OSS)
• [PATCH V2 04/26] imx: imx8ulp: clock: Add clock support for i3c controller   Peng Fan (OSS)
• [PATCH V2 05/26] imx: imx8ulp: add CAAM clock entry   Peng Fan (OSS)
• [PATCH V2 06/26] imx: imx8ulp_evk: Remove PMIC Bucks PWM mode settings   Peng Fan (OSS)
• [PATCH V2 07/26] imx: imx8ulp: add ND/LD clock   Peng Fan (OSS)
• [PATCH V2 08/26] imx: imx8ulp_evk: Skip init DDR for reboot in dual boot mode   Peng Fan (OSS)
• [PATCH V2 09/26] imx: imx8ulp: cgc: Switch to NICLPAV to FRO192 before PLL4 init   Peng Fan (OSS)
• [PATCH V2 10/26] imx: imx8ulp: enable MU0_B clk by default   Peng Fan (OSS)
• [PATCH V2 11/26] misc: imx8ulp: Add OEM SRK Hash fuse support   Peng Fan (OSS)
• [PATCH V2 12/26] imx: imx8ulp: Change LPAV assignment for dual boot   Peng Fan (OSS)
• [PATCH V2 13/26] imx: imx8ulp: Load the lposc fuse for dual boot   Peng Fan (OSS)
• [PATCH V2 14/26] misc: S400_API: add ahab_release_caam   Peng Fan (OSS)
• [PATCH V2 15/26] misc: S400_API: Update S400 API for buffer dump   Peng Fan (OSS)
• [PATCH V2 16/26] imx: imx8ulp: release CAAM for the Cortex-A35   Peng Fan (OSS)
• [PATCH V2 17/26] imx: imx8ulp_evk: Update LPDDR4 PHY settings   Peng Fan (OSS)
• [PATCH V2 18/26] imx: imx8ulp_evk: call the handshake with M33   Peng Fan (OSS)
• [PATCH V2 19/26] imx: imx8ulp_evk: Power down the domains may used in u-boot   Peng Fan (OSS)
• [PATCH V2 20/26] imx: dynamic setting mmcdev and mmcroot   Peng Fan (OSS)
• [PATCH V2 21/26] imx: imx8ulp_evk: Enable SD/MMC port auto detect   Peng Fan (OSS)
• [PATCH V2 22/26] imx: imx8ulp: enable wdog_ad interrupt in CMC1   Peng Fan (OSS)
• [PATCH V2 23/26] imx: imx8ulp: reserve tee memory   Peng Fan (OSS)
• [PATCH V2 24/26] imx: imx8ulp_evk: enlarge CONFIG_NR_DRAM_BANKS   Peng Fan (OSS)
• [PATCH V2 25/26] imx: imx8ulp_evk: Enable multiple env storage devices   Peng Fan (OSS)
• [PATCH V2 26/26] misc: imx8ulp: Update fuse driver   Peng Fan (OSS)
• [PATCH] imx8ulp: clock: Fix lcd clock algo   Peng Fan (OSS)
• [PATCH] arm: imx: parse-container: add some missing end of line   Peng Fan (OSS)
• [PATCH] ARM: imx: Get rid of only i.MX8M SMCCC arch call   Peng Fan (OSS)
• [PATCH] imx: power-domain: Add i.MX8MP support   Peng Fan (OSS)
• [PATCH v2] clk: imx8mp: Fill in DWC3 USB, USB PHY, HSIOMIX clock   Peng Fan (OSS)
• [PATCH 0/6] imx8mp: misc update   Peng Fan (OSS)
• [PATCH 1/6] imx: imx8mp: Add iMX8MP UltraLite Part cpu type   Peng Fan (OSS)
• [PATCH 2/6] imx: imx8mp: detect i.MX8MP UltraLite when get cpu rev   Peng Fan (OSS)
• [PATCH 3/6] imx: imx8mp: disable fused IP for UltraLite   Peng Fan (OSS)
• [PATCH 4/6] imx: imx8m: soc: runtime drop extcon property from usbotg node   Peng Fan (OSS)
• [PATCH 5/6] imx8m: soc: drop phy-reset-gpios for fec   Peng Fan (OSS)
• [PATCH 6/6] imx8m: soc: Relocate u-boot to the top DDR in 4GB space   Peng Fan (OSS)
• [PATCH 00/13] configs: clean up SDHC marco and MMCROOT   Peng Fan (OSS)
• [PATCH 01/13] configs: imx8mm_evk: drop unused SDHC macro   Peng Fan (OSS)
• [PATCH 02/13] configs: imx8mp_evk: drop unused SDHC macro   Peng Fan (OSS)
• [PATCH 03/13] configs: imx8mn_evk: drop unused SDHC macro   Peng Fan (OSS)
• [PATCH 04/13] configs: mx6sxsabresd: drop CONFIG_SYS_FSL_USDHC_NUM   Peng Fan (OSS)
• [PATCH 05/13] configs: mx7dsabresd: drop unused SDHC macro   Peng Fan (OSS)
• [PATCH 06/13] configs: imx8qm/qxp_evk: drop unused SDHC macro   Peng Fan (OSS)
• [PATCH 07/13] configs: verdin-imx8m: drop unused SDHC macro   Peng Fan (OSS)
• [PATCH 08/13] configs: imx8mm/n_beacon: drop unused SDHC macro   Peng Fan (OSS)
• [PATCH 09/13] configs: imx8mm/n_venice: drop unused SDHC macro   Peng Fan (OSS)
• [PATCH 10/13] configs: phycore_imx8mm/p: drop unused SDHC macro   Peng Fan (OSS)
• [PATCH 11/13] configs: imx: drop IMX_FEC_BASE   Peng Fan (OSS)
• [PATCH 12/13] configs: drop CONFIG_MMCROOT   Peng Fan (OSS)
• [PATCH 13/13] scripts: config_whitelist: drop CONFIG_MMCROOT   Peng Fan (OSS)
• [PATCH 0/6] Convert COUNTER_FREQUENCY to CONFIG_COUNTER_FREQUENCY   Peng Fan (OSS)
• [PATCH 1/6] xilinx: versal: board: use CONFIG_COUNTER_FREQUENCY   Peng Fan (OSS)
• [PATCH 2/6] arch: arm: move COUNTER_FREQUENCY from versal to arm   Peng Fan (OSS)
• [PATCH 3/6] arch: arm: Kconfig: set default COUNTER_FREQUENCY for i.MX   Peng Fan (OSS)
• [PATCH 4/6] configs: set CONFIG_COUNTER_FREQUENCY   Peng Fan (OSS)
• [PATCH 5/6] armv8: set cntfrq_el0 if CONFIG_COUNTER_FREQUENCY is valid   Peng Fan (OSS)
• [PATCH 6/6] include/configs: drop COUNTER_FREQUENCY   Peng Fan (OSS)
• [PATCH] imx8mq: soc: Set the BYPASS ID SWAP bit (GPR10 bit 1)   Peng Fan (OSS)
• [PATCH V2 0/6] Convert COUNTER_FREQUENCY to CONFIG_COUNTER_FREQUENCY   Peng Fan (OSS)
• [PATCH V2 1/6] xilinx: versal: board: use CONFIG_COUNTER_FREQUENCY   Peng Fan (OSS)
• [PATCH V2 2/6] arch: arm: move COUNTER_FREQUENCY from versal to arm   Peng Fan (OSS)
• [PATCH V2 3/6] arch: arm: Kconfig: set default COUNTER_FREQUENCY for i.MX   Peng Fan (OSS)
• [PATCH V2 4/6] configs: set CONFIG_COUNTER_FREQUENCY   Peng Fan (OSS)
• [PATCH V2 5/6] armv8: set cntfrq_el0 if CONFIG_COUNTER_FREQUENCY is valid   Peng Fan (OSS)
• [PATCH V2 6/6] include/configs: drop COUNTER_FREQUENCY   Peng Fan (OSS)
• [PATCH 1/3] configs: imx8mp_evk: enable CONFIG_DM_SERIAL   Peng Fan (OSS)
• [PATCH 2/3] configs: imx8mm_evk: enable CONFIG_DM_SERIAL   Peng Fan (OSS)
• [PATCH 3/3] configs: imx8mp_evk: enable CONFIG_DM_SERIAL   Peng Fan (OSS)
• [PATCH V2 2/6] arch: arm: move COUNTER_FREQUENCY from versal to arm   Peng Fan (OSS)
• [PATCH 2/2] mmc: sunxi: Remove unnecessary pinmux option dependency   Peng Fan (OSS)
• [PATCH] Kconfig: Fix SYS_MALLOC_F_LEN for i.MX8MQ   Peng Fan (OSS)
• [PATCH] imx8m: imx8mq-evk: enable CONFIG_DM_SERIAL   Peng Fan (OSS)
• [PATCH] imx: mx7dsabresd: enable DM_SERIAL   Peng Fan (OSS)
• [PATCH V2] imx: mx7dsabresd: enable DM_SERIAL   Peng Fan (OSS)
• [PATCH V2 0/4] imx: imx8m: enable DM SERIAL   Peng Fan (OSS)
• [PATCH V2 1/4] imx: imx8mp_evk: enable CONFIG_DM_SERIAL   Peng Fan (OSS)
• [PATCH V2 2/4] imx: imx8mm_evk: enable CONFIG_DM_SERIAL   Peng Fan (OSS)
• [PATCH V2 3/4] imx: imx8mn_evk: enable CONFIG_DM_SERIAL   Peng Fan (OSS)
• [PATCH V2 4/4] imx: imx8mq-evk: enable CONFIG_DM_SERIAL   Peng Fan (OSS)
• [PATCH V2 0/6] Convert COUNTER_FREQUENCY to CONFIG_COUNTER_FREQUENCY   Peng Fan (OSS)
• [PATCH V3 0/6] Convert COUNTER_FREQUENCY to CONFIG_COUNTER_FREQUENCY   Peng Fan (OSS)
• [PATCH V3 1/6] xilinx: versal: board: use CONFIG_COUNTER_FREQUENCY   Peng Fan (OSS)
• [PATCH V3 2/6] arch: arm: move COUNTER_FREQUENCY from versal to arm   Peng Fan (OSS)
• [PATCH V3 3/6] arch: arm: Kconfig: set default COUNTER_FREQUENCY for i.MX   Peng Fan (OSS)
• [PATCH V3 4/6] configs: set CONFIG_COUNTER_FREQUENCY   Peng Fan (OSS)
• [PATCH V3 5/6] armv8: set cntfrq_el0 if CONFIG_COUNTER_FREQUENCY is valid   Peng Fan (OSS)
• [PATCH V3 6/6] include/configs: drop COUNTER_FREQUENCY   Peng Fan (OSS)
• [PATCH V3 0/4] imx: imx8m: enable DM SERIAL   Peng Fan (OSS)
• [PATCH V3 1/4] imx: imx8mp_evk: enable CONFIG_DM_SERIAL   Peng Fan (OSS)
• [PATCH V3 2/4] imx: imx8mm_evk: enable CONFIG_DM_SERIAL   Peng Fan (OSS)
• [PATCH V3 3/4] imx: imx8mn_evk: enable CONFIG_DM_SERIAL   Peng Fan (OSS)
• [PATCH V3 4/4] imx: imx8mq-evk: enable CONFIG_DM_SERIAL   Peng Fan (OSS)
• [PATCH V2 19/26] imx: imx8ulp_evk: Power down the domains may used in u-boot   Peng Fan (OSS)
• [PATCH V2] imx: mx7dsabresd: enable DM_SERIAL   Peng Fan (OSS)
• [PATCH V4 0/6] Convert COUNTER_FREQUENCY to CONFIG_COUNTER_FREQUENCY   Peng Fan (OSS)
• [PATCH V4 1/6] xilinx: versal: board: use CONFIG_COUNTER_FREQUENCY   Peng Fan (OSS)
• [PATCH V4 2/6] arch: arm: move COUNTER_FREQUENCY from versal to arm   Peng Fan (OSS)
• [PATCH V4 3/6] arch: arm: Kconfig: set default COUNTER_FREQUENCY   Peng Fan (OSS)
• [PATCH V4 4/6] configs: set CONFIG_COUNTER_FREQUENCY   Peng Fan (OSS)
• [PATCH V4 5/6] include/configs: drop COUNTER_FREQUENCY   Peng Fan (OSS)
• [PATCH V4 6/6] arm: set cntfrq_el0 if CONFIG_COUNTER_FREQUENCY is valid   Peng Fan (OSS)
• RFC: Updating i.MX8M CPU thermal trip-point at runtime   Peng Fan (OSS)
• [PATCH V2 00/12] configs: clean up SDHC marco and MMCROOT   Peng Fan (OSS)
• [PATCH V2 01/12] configs: imx8mm_evk: drop unused SDHC macro   Peng Fan (OSS)
• [PATCH V2 02/12] configs: imx8mp_evk: drop unused SDHC macro   Peng Fan (OSS)
• [PATCH V2 03/12] configs: imx8mn_evk: drop unused SDHC macro   Peng Fan (OSS)
• [PATCH V2 04/12] configs: mx6sxsabresd: drop CONFIG_SYS_FSL_USDHC_NUM   Peng Fan (OSS)
• [PATCH V2 05/12] configs: mx7dsabresd: drop unused SDHC macro   Peng Fan (OSS)
• [PATCH V2 06/12] configs: imx8qm/qxp_evk: drop unused SDHC macro   Peng Fan (OSS)
• [PATCH V2 07/12] configs: verdin-imx8m: drop unused SDHC macro   Peng Fan (OSS)
• [PATCH V2 08/12] configs: imx8mm/n_venice: drop unused SDHC macro   Peng Fan (OSS)
• [PATCH V2 09/12] configs: phycore_imx8mm/p: drop unused SDHC macro   Peng Fan (OSS)
• [PATCH V2 10/12] configs: drop CONFIG_MMCROOT   Peng Fan (OSS)
• [PATCH V2 11/12] scripts: config_whitelist: drop CONFIG_MMCROOT   Peng Fan (OSS)
• [PATCH V2 12/12] configs: imx: drop IMX_FEC_BASE   Peng Fan (OSS)
• [PATCH V4 0/4] imx: imx8m: enable DM SERIAL   Peng Fan (OSS)
• [PATCH V4 1/4] imx: imx8mp_evk: enable CONFIG_DM_SERIAL   Peng Fan (OSS)
• [PATCH V4 2/4] imx: imx8mm_evk: enable CONFIG_DM_SERIAL   Peng Fan (OSS)
• [PATCH V4 3/4] imx: imx8mn_evk: enable CONFIG_DM_SERIAL   Peng Fan (OSS)
• [PATCH V4 4/4] imx: imx8mq-evk: enable CONFIG_DM_SERIAL   Peng Fan (OSS)
• [PATCH V2 20/26] imx: dynamic setting mmcdev and mmcroot   Peng Fan (OSS)
• [PATCH] spl_imx_romapi: Remove extraneous character   Peng Fan (OSS)
• [PATCH 1/2] imx8mn_evk: Enable cache in SPL   Peng Fan (OSS)
• [PATCH 2/2] doc: imx8mn_evk: Do not export ATF_LOAD_ADDR   Peng Fan (OSS)
• please modify output of i.MX8MSCALE DDR Tool   Peng Fan (OSS)
• [PATCH 1/3] Kconfig: set i.MX8MQ SYS_MALLOC_F_LEN   Peng Fan (OSS)
• [PATCH 2/3] imx: imx8mq: default select CLK_IMX8MQ   Peng Fan (OSS)
• [PATCH 3/3] imx: imx8mq: select CONFIG_CMD_CLK   Peng Fan (OSS)
• [PATCH 1/4] imx: bootaux: cleanup code   Peng Fan (OSS)
• [PATCH 2/4] imx: bootaux: add missing newline   Peng Fan (OSS)
• [PATCH 3/4] imx: bootaux: get stack from elf file   Peng Fan (OSS)
• [PATCH 4/4] imx: imx8m: add rproc_att   Peng Fan (OSS)
• [PATCH] imx: logos: use NXP logo   Peng Fan (OSS)
• [PATCH] imx: imx8m: drop uneeded check   Peng Fan (OSS)
• [PATCH] imx: drop CONFIG_MXC_UART_BASE   Peng Fan (OSS)
• [PATCH 00/15] imx8m: convert to DM_SERIAL   Peng Fan (OSS)
• [PATCH 01/15] imx: imx8mp_rsb3720a1: convert to DM_SERIAL   Peng Fan (OSS)
• [PATCH 02/15] imx: imx8m[m/n/p]_venice: Enable SPL_DM_SERIAL   Peng Fan (OSS)
• [PATCH 03/15] imx: imx8mm_mx8menlo: Enable DM_SERIAL   Peng Fan (OSS)
• [PATCH 04/15] imx: imx8m[m/n]_beacon: Enable SPL_DM_SERIAL   Peng Fan (OSS)
• [PATCH 05/15] imx: imx8mm-cl-iot-gate: Enable DM_SERIAL   Peng Fan (OSS)
• [PATCH 06/15] imx: imx8mm_icore: Enable SPL_DM_SERIAL   Peng Fan (OSS)
• [PATCH 07/15] imx: imx8m[m/p]_phycore: Enable DM_SERIAL   Peng Fan (OSS)
• [PATCH 08/15] imx: imx8mn_var_som: enable DM_SERIAL   Peng Fan (OSS)
• [PATCH 09/15] imx: imx8mm_edm_sbc: Enable SPL_DM_SERIAL   Peng Fan (OSS)
• [PATCH 10/15] imx: kontron-sl-mx8mm: enable DM_SERIAL   Peng Fan (OSS)
• [PATCH 11/15] imx: imx8mn_bsh_smm_s2: drop CONFIG_MXC_UART_BASE   Peng Fan (OSS)
• [PATCH 12/15] imx: dts: move common changes to imx8mq-u-boot.dtsi   Peng Fan (OSS)
• [PATCH 13/15] imx: imx8mq-cm: enable CONFIG_DM_SERIAL   Peng Fan (OSS)
• [PATCH 14/15] imx: imx8mq-pico: enable CONFIG_DM_SERIAL   Peng Fan (OSS)
• [PATCH 15/15] imx: imx8mq-phandle: enable CONFIG_DM_SERIAL   Peng Fan (OSS)
• [PATCH 7/8] powerpc: mpc85xx: Set TEXT_BASE addresses to real base values   Priyanka Jain (OSS)
• [PATCH 1/2] powerpc: mpc85xx: Add support for generating QorIQ pre-PBL eSDHC boot sector   Priyanka Jain (OSS)
• [PATCH v14 1/2] net: Add TCP protocol   Ying-Chun Liu (PaulLiu)
• 回复: minor regression in U-Boot 2022.04   Weijie Gao (高惟杰)
• [PATCH v2 1/2] net: eth-uclass: Fix eth_halt   qianfanguijin at 163.com
• [PATCH v2 2/2] net: eth-uclass: Fix data abort when tftp get nonexistent file via usb   qianfanguijin at 163.com
• [PATCH v1] sunxi: Make SYS_VENDOR, SYS_BOARD, SYS_CONFIG_NAME configurable   qianfanguijin at 163.com
• [PATCH v1] drivers: spi: spi-sunxi: Add Kconfig option for sun4i_spi_parse_pins   qianfanguijin at 163.com
• [PATCH v1] splash: splash_storage_read_raw: Add mmc support   qianfanguijin at 163.com
• [PATCH] fdt: Fix TPL SEPARATE_BSS check when locating DTB   Andrew Abbott
• [RFC PATCH 0/8] Build Rockchip final images using binman   Andrew Abbott
• [RFC PATCH 1/8] binman: mkimage: Support ':'-separated inputs   Andrew Abbott
• [RFC PATCH 2/8] rockchip: Add binman definitions for final images   Andrew Abbott
• [RFC PATCH 3/8] soc: rockchip: Include common U-Boot dtsi file   Andrew Abbott
• [RFC PATCH 4/8] board: rockchip: Move SPI U-Boot offset to config   Andrew Abbott
• [RFC PATCH 5/8] rockchip: Remove obsolete Makefile targets   Andrew Abbott
• [RFC PATCH 6/8] rockchip: Enable binman for ARM64   Andrew Abbott
• [RFC PATCH 7/8] doc: rockchip: Update for new binman image generation   Andrew Abbott
• [RFC PATCH 8/8] board: rockpro64: Enable building SPI image   Andrew Abbott
• Does enabling the Driver Model makes the boot slower ?   Abder
• [PATCH 07/10] dm: core: Allow devres to be disabled in SPL   Angus Ainslie
• [PATCH] usb: dwc3-generic: Fix the iMX8MQ support   Angus Ainslie
• [PATCH v3] board: purism: add the Purism Librem5 phone   Angus Ainslie
• [PATCH v2] board: purism: add the Purism Librem5 phone   Angus Ainslie
• [PATCH v3] drivers: spi-nor: Add JEDEC id for W25Q16JV   Angus Ainslie
• [PATCH] spl: spl_sdp: don't call board_usb_init twice   Angus Ainslie
• [PATCH] usb: dwc3: add a SPL_USB_DWC3_GENERIC option for the dwc3 driver   Angus Ainslie
• [PATCH v3] board: purism: add the Purism Librem5 phone   Angus Ainslie
• [PATCH v2] usb: dwc3: add a SPL_USB_DWC3_GENERIC option for the dwc3 driver   Angus Ainslie
• [PATCH v4] board: purism: add the Purism Librem5 phone   Angus Ainslie
• [PATCH 0/8] powerpc: mpc85xx: Fix and cleanup mpc85xx code   Sinan Akman
• [PATCH 0/8] powerpc: mpc85xx: Fix and cleanup mpc85xx code   Sinan Akman
• Error fsl_esdhc: Internal clock never stabilised.   Sinan Akman
• [PATCH] clk: imx8mp: Add ECSPI clocks   Elmar Albert
• [l4m-2022.04][u-boot-at91] spi: atmel-quadspi.c: Fix the buswidth adjustment between spi-mem and controller   Tudor Ambarus
• [PATCH v2] spi: atmel-quadspi: Fix the buswidth adjustment between spi-mem and controller   Tudor Ambarus
• [PATCH] ARM: dts: at91: sama7g5: Fix QSPI1 clock   Tudor Ambarus
• [PATCH] ARM: dts: at91: sama7g5ek: Align the impedance of the QSPI0's HSIO and PCB lines   Tudor Ambarus
• [PATCH 1/2] Kconfig: Change SYS_MALLOC_F_LEN default to 0x2000   Kristian Amlie
• [PATCH] env: Avoid using a leftover text-environment file   Sean Anderson
• [PATCH] dm: Use explicit numbers for all enum values   Sean Anderson
• The contradictory nature of spl_nand_fit_read   Sean Anderson
• The contradictory nature of spl_nand_fit_read   Sean Anderson
• [RFC PATCH 0/7] spl: Use common function for loading/parsing images   Sean Anderson
• [RFC PATCH 1/7] spl: Add generic spl_load function   Sean Anderson
• [RFC PATCH 2/7] spl: Convert ext to use spl_load   Sean Anderson
• [RFC PATCH 3/7] spl: Convert fat to spl_load   Sean Anderson
• [RFC PATCH 4/7] spl: Convert mmc to spl_load   Sean Anderson
• [RFC PATCH 5/7] spl: Convert net to spl_load   Sean Anderson
• [RFC PATCH 6/7] spl: Convert nor to spl_load   Sean Anderson
• [RFC PATCH 7/7] spl: Convert spi to spl_load   Sean Anderson
• [PATCH] env: Fix avoid using a leftover text-environment file   Sean Anderson
• The contradictory nature of spl_nand_fit_read   Sean Anderson
• [PATCH 0/4] serial: Finish adding puts support   Sean Anderson
• [PATCH 1/4] serial: Fix _serial_puts using \n\r instead of \r\n   Sean Anderson
• [PATCH 2/4] serial: sandbox: Implement puts   Sean Anderson
• [PATCH 3/4] test: serial: Add test for putc/puts   Sean Anderson
• [PATCH 4/4] serial: smh: Implement puts for DM   Sean Anderson
• [PATCH v3 27/29] serial: sandbox: Implement puts   Sean Anderson
• [PATCH v2 00/11] Add support for NVMEM API   Sean Anderson
• [PATCH v2 01/11] sandbox: net: Remove fake-host-hwaddr   Sean Anderson
• [PATCH v2 02/11] sandbox: Remove eth2addr from environment   Sean Anderson
• [PATCH v2 03/11] test: eth: Add test for ethernet addresses   Sean Anderson
• [PATCH v2 04/11] sandbox: Move some mac addresses to device tree   Sean Anderson
• [PATCH v2 05/11] misc: i2c_eeprom: Make i2c_eeprom_write use a const buf   Sean Anderson
• [PATCH v2 06/11] misc: Add support for nvmem cells   Sean Anderson
• [PATCH v2 07/11] sandbox: Enable NVMEM   Sean Anderson
• [PATCH v2 08/11] net: Add support for reading mac addresses from nvmem cells   Sean Anderson
• [PATCH v2 09/11] test: Load mac address with i2c eeprom   Sean Anderson
• [PATCH v2 10/11] test: Load mac address using RTC   Sean Anderson
• [PATCH v2 11/11] test: Load mac address using misc device   Sean Anderson
• [RFC PATCH] mips: dts: add initial support for ls1c300 SoC   Sean Anderson
• [RFC PATCH v2] mips: dts: add initial support for ls1c300 SoC   Sean Anderson
• [PATCH v1 5/6] clk: nuvoton: Add support for NPCM750   Sean Anderson
• [PATCH 0/8] Fix misc ASAN reports   Sean Anderson
• [PATCH v2] IOMUX: Fix access past end of console_devices   Sean Anderson
• [RFC PATCH 1/7] spl: Add generic spl_load function   Sean Anderson
• [PATCH v2 1/2] env: setenv add resolve value option   Sean Anderson
• [PATCH 3/3] binman: add test for sign option   Sean Anderson
• [PATCH] mkimage: fit: Simplify tmpfile name calculation   Sean Anderson
• [PATCH 1/2] mkimage: Document misc options   Sean Anderson
• [PATCH 2/2] mkimage: Support signing 'auto' FITs   Sean Anderson
• [PATCH] mkimage: fit: Simplify tmpfile name calculation   Sean Anderson
• [PATCH 1/2] mkimage: Document misc options   Sean Anderson
• [PATCH 3/3] binman: add test for sign option   Sean Anderson
• RFC: Adding U-Boot version in FDT chosen node   Sean Anderson
• [PATCH v2] treewide: Enable SPL_SEPARATE_BSS if SPL_BSS_START_ADDR is used   Sean Anderson
• [PATCH 3/5] imx8mm-cl-iot-gate: Retrieve the MAC address from EEPROM   Sean Anderson
• [PATCH v2 03/11] test: eth: Add test for ethernet addresses   Sean Anderson
• [PATCH v3 00/13] Add support for NVMEM API   Sean Anderson
• [PATCH v3 01/13] sandbox: net: Add aliases for ethernet devices   Sean Anderson
• [PATCH v3 02/13] sandbox: net: Add mac address for eth8 to environment   Sean Anderson
• [PATCH v3 03/13] test: eth: Add test for ethernet addresses   Sean Anderson
• [PATCH v3 04/13] sandbox: net: Remove fake-host-hwaddr   Sean Anderson
• [PATCH v3 05/13] sandbox: Remove eth2addr from environment   Sean Anderson
• [PATCH v3 06/13] sandbox: Move some mac addresses to device tree   Sean Anderson
• [PATCH v3 07/13] misc: i2c_eeprom: Make i2c_eeprom_write use a const buf   Sean Anderson
• [PATCH v3 08/13] misc: Add support for nvmem cells   Sean Anderson
• [PATCH v3 09/13] sandbox: Enable NVMEM   Sean Anderson
• [PATCH v3 10/13] net: Add support for reading mac addresses from nvmem cells   Sean Anderson
• [PATCH v3 11/13] test: Load mac address with i2c eeprom   Sean Anderson
• [PATCH v3 12/13] test: Load mac address using RTC   Sean Anderson
• [PATCH v3 13/13] test: Load mac address using misc device   Sean Anderson
• [PATCH] misc: Fix always compiling MISC even for SPL/TPL   Sean Anderson
• [PATCH 2/2] arm: layerscape: Disable erratum A009007 on LS1021A, LS1043A, and LS1046A   Sean Anderson
• [PATCH 1/2] arm: layerscape: Add sfp driver   Sean Anderson
• [PATCH 2/2] arch: layerscape: Add SFP binding   Sean Anderson
• [PATCH 1/2] arm: layerscape: Add sfp driver   Sean Anderson
• [PATCH] board: ls1046afrwy: Remove Manish Tomar's email   Sean Anderson
• spl: spi: Raw Kernel Image Support for Falcon Mode Boot Via SPI Devices   Sean Anderson
• spl: spi: Raw Kernel Image Support for Falcon Mode Boot Via SPI Devices   Sean Anderson
• [PATCH 2/2] arch: layerscape: Add SFP binding   Sean Anderson
• [PATCH 1/5] clk: meson: add minimal driver for axg-ao clocks   Sean Anderson
• [PATCH 2/2] arch: layerscape: Add SFP binding   Sean Anderson
• [PATCH] led: Configure LED default-state on boot   Sean Anderson
• imx8mm eLCDIF clock   Sean Anderson
• [PATCH 1/5] clk: meson: add minimal driver for axg-ao clocks   Sean Anderson
• [PATCH v3] mips: dts: add initial support for ls1c300 SoC   Sean Anderson
• [PATCH v3 2/4] clk: nuvoton: Add support for NPCM750   Sean Anderson
• [PATCH 1/3] dm: core: Add DM_FLAG_PROBE_AFTER_BIND flag   Sean Anderson
• [PATCH] patman: Fix defaults not propegating to subparsers   Sean Anderson
• [RESEND PATCH v2 0/3] net: fm: Add support for loading firmware from filesystem   Sean Anderson
• [RESEND PATCH v2 1/3] misc: fs_loader: Add function to get the chosen loader   Sean Anderson
• [RESEND PATCH v2 2/3] net: fm: Add firmware name parameter   Sean Anderson
• [RESEND PATCH v2 3/3] net: fm: Support loading firmware from a filesystem   Sean Anderson
• [PATCH v2 0/6] net: fm: Verify Fman microcode   Sean Anderson
• [PATCH v2 1/6] ARMv8/sec_firmware: Remove SEC_FIRMWARE_FIT_CNF_NAME   Sean Anderson
• [PATCH v2 2/6] image: fit: Add some helpers for getting data   Sean Anderson
• [PATCH v2 3/6] ARMv8/sec_firmware: Convert to use fit_get_data_conf_prop   Sean Anderson
• [PATCH v2 4/6] cmd: fpga: Convert to use fit_get_data_node   Sean Anderson
• [PATCH v2 5/6] net: Convert fit verification to use fit_get_data_*   Sean Anderson
• [PATCH v2 6/6] net: fm: Add support for FIT firmware   Sean Anderson
• [PATCH v2 0/9] spl: Use common function for loading/parsing images   Sean Anderson
• [PATCH v2 1/9] spl: Add generic spl_load function   Sean Anderson
• [PATCH v2 2/9] spl: Convert ext to use spl_load   Sean Anderson
• [PATCH v2 3/9] spl: Convert fat to spl_load   Sean Anderson
• [PATCH v2 4/9] spl: Convert mmc to spl_load   Sean Anderson
• [PATCH v2 5/9] spl: Convert net to spl_load   Sean Anderson
• [PATCH v2 6/9] spl: Convert nor to spl_load   Sean Anderson
• [PATCH v2 7/9] spl: Convert semihosting to spl_load   Sean Anderson
• [PATCH v2 8/9] spl: Convert spi to spl_load   Sean Anderson
• [PATCH v2 9/9] spl: spi: Consolidate spi_load_image_os into spl_spi_load_image   Sean Anderson
• [PATCH v2 0/3] arm: layerscape: Add sfp driver   Sean Anderson
• [PATCH v2 1/3] arm: layerscape: Add sfp driver   Sean Anderson
• [PATCH v2 2/3] ARM: dts: ls1021a: update the clockgen node   Sean Anderson
• [PATCH v2 3/3] arch: layerscape: Add SFP binding   Sean Anderson
• [PATCH] serial: smh: Check return value of strndup   Sean Anderson
• [PATCH] usb: dwc3: add a SPL_USB_DWC3_GENERIC option for the dwc3 driver   Sean Anderson
• [PATCH] misc: Fix always compiling MISC even for SPL/TPL   Sean Anderson
• [PATCH v2] misc: Fix always compiling MISC even for SPL/TPL   Sean Anderson
• [PATCH 1/3] dm: core: Add DM_FLAG_PROBE_AFTER_BIND flag   Sean Anderson
• [PATCH v2 1/6] clk: meson: add minimal driver for axg-ao clocks   Sean Anderson
• [PATCH 1/3] dm: core: Add DM_FLAG_PROBE_AFTER_BIND flag   Sean Anderson
• [PATCH v3 08/13] misc: Add support for nvmem cells   Sean Anderson
• [PATCH] ARM: layerscape: Use ARCH_LS104?A insead of TARGET_LS104?ARDB   Sean Anderson
• [PATCH] net: e1000: Depend on CONFIG_PCI   Sean Anderson
• [PATCH] patman: Fix defaults not propegating to subparsers   Sean Anderson
• [PATCH] ls10xxx: Use a sane SPL_SYS_MALLOC_F_LEN default   Sean Anderson
• [PATCH] ls10xxx: Use a sane SPL_SYS_MALLOC_F_LEN default   Sean Anderson
• [PATCH v2] ls10xxx: Use a sane SPL_SYS_MALLOC_F_LEN default   Sean Anderson
• [PATCH v2 1/2] mkimage: Document misc options   Sean Anderson
• [PATCH v2 2/2] mkimage: Support signing 'auto' FITs   Sean Anderson
• fsl_hash.c: Alignment problem when using caam_hash() for FIT images   Sean Anderson
• [PATCH v2] patman: Fix defaults not propagating to subparsers   Sean Anderson
• [PATCH v3 08/13] misc: Add support for nvmem cells   Sean Anderson
• [PATCH] misc: fs_loader: Fix compile warnings when CONFIG_CMD_UBIFS is enabled   Sean Anderson
• [PATCH 1/1] clk: scmi: fix scmi_clk_get_attibute()   Sean Anderson
• [PATCH 1/2] riscv: ae350: Fix OF_BOARD boot failure   Andes
• [PATCH 2/2] riscv: ae350: Fix OF_BOARD boot failure   Andes
• [PATCH] riscv: ae350: Fix xip config boot failure   Andes
• [PATCH 00/11] Add Chameleon V3 support   Paweł Anikiel
• [PATCH 01/11] arm: dts: Add Mercury+ AA1 devicetree   Paweł Anikiel
• [PATCH 02/11] arm: dts: Add Chameleonv3 handoff headers   Paweł Anikiel
• [PATCH 03/11] arm: dts: Add Chameleonv3 devicetree   Paweł Anikiel
• [PATCH 04/11] board: Add Chameleonv3 board dir   Paweł Anikiel
• [PATCH 05/11] config: Add Chameleonv3 config   Paweł Anikiel
• [PATCH 06/11] misc: atsha204a: Increase wake delay by tWHI   Paweł Anikiel
• [PATCH 07/11] sysreset: socfpga: Use parent device for reading base address   Paweł Anikiel
• [PATCH 08/11] socfpga: arria10: Replace delays with busy waiting in cm_full_cfg   Paweł Anikiel
• [PATCH 09/11] socfpga: arria10: Improve bitstream loading speed   Paweł Anikiel
• [PATCH 10/11] socfpga: arria10: Wait for fifo empty after writing bitstream   Paweł Anikiel
• [PATCH 11/11] socfpga: arria10: Allow dcache_enable before relocation   Paweł Anikiel
• [PATCH 07/11] sysreset: socfpga: Use parent device for reading base address   Paweł Anikiel
• [PATCH 02/11] arm: dts: Add Chameleonv3 handoff headers   Paweł Anikiel
• [PATCH 01/11] arm: dts: Add Mercury+ AA1 devicetree   Paweł Anikiel
• [PATCH 03/11] arm: dts: Add Chameleonv3 devicetree   Paweł Anikiel
• [PATCH v4 05/11] efi_loader: export efi_locate_device_handle()   Ilias Apalodimas
• [PATCH v4 07/11] bootmenu: add UEFI and disto_boot entries   Ilias Apalodimas
• [PATCH v4 4/8] board: Define set_dfu_alt_info() for boards with UEFI capsule update enabled   Ilias Apalodimas
• [RFC PATCH] efi_loader: add sha384/512 on certificate revocation   Ilias Apalodimas
• [RFC PATCH] efi_loader: add sha384/512 on certificate revocation   Ilias Apalodimas
• [PATCH] configs: Enable EXT4 and ISO partitions for the DeveloperBox   Ilias Apalodimas
• [PATCH 6/6] arm_ffa: introduce FF-A MM communication   Ilias Apalodimas
• [PATCH v4 01/12] dm: tag: change ENOSPC to ENOMEM   Ilias Apalodimas
• [PATCH 1/2 v2] efi_loader: add sha384/512 on certificate revocation   Ilias Apalodimas
• [PATCH 2/2 v2] test: Add more test cases for rejecting an EFI image   Ilias Apalodimas
• [PATCH v5 4/9] tpm: Add the RNG child device   Ilias Apalodimas
• [PATCH 1/2 v2] efi_loader: add sha384/512 on certificate revocation   Ilias Apalodimas
• [PATCH 1/2] efi_loader: add sha384/512 on certificate revocation   Ilias Apalodimas
• [PATCH 2/2 v3] test/py: Add more test cases for rejecting an EFI image   Ilias Apalodimas
• [PATCH 2/2 v3] test/py: Add more test cases for rejecting an EFI image   Ilias Apalodimas
• [PATCH 1/2] efi_loader: add sha384/512 on certificate revocation   Ilias Apalodimas
• [PATCH v2 2/6] clk: meson: fix driver name for g12a-ao clocks   Neil Armstrong
• [PATCH v2 3/6] clk: meson: update driver for g12a-ao clocks   Neil Armstrong
• [PATCH v2 4/6] adc: meson-saradc: add AXG variant   Neil Armstrong
• [PATCH v2 5/6] board: amlogic: jethub j100: enable saradc in dts   Neil Armstrong
• [PATCH v2 6/6] board: amlogic: jethub j100: enable saradc in config   Neil Armstrong
• [PATCH v2 1/6] clk: meson: add minimal driver for axg-ao clocks   Neil Armstrong
• [PATCH v3 3/6] clk: meson: update driver for g12a-ao clocks   Neil Armstrong
• [PATCH v3 5/6] board: amlogic: jethub j100: enable saradc in dts   Neil Armstrong
• [PATCH v3 6/6] board: amlogic: jethub j100: enable saradc in config   Neil Armstrong
• [PATCH v3 0/6] meson: add clk and adc support for JetHub D1 (j100)   Neil Armstrong
• [PATCH v3 0/6] meson: add clk and adc support for JetHub D1 (j100)   Neil Armstrong
• [PATCH 1/2] doc: boards: amlogic: update documentation for ADC support for AXG   Neil Armstrong
• [PATCH 2/2] doc: boards: amlogic: update jethub d1 specifications   Neil Armstrong
• [PATCH 1/2] doc: boards: amlogic: update documentation for ADC support for AXG   Neil Armstrong
• [GIT PULL] Please pull u-boot-amlogic-20220427   Neil Armstrong
• [PATCH 0/4] Add support for TPS65219 PMIC on AM64X-SKEVM   Neil Armstrong
• [PATCH 1/4] power: add driver for the TPS65219 PMIC   Neil Armstrong
• [PATCH 2/4] regulator: add driver for the TPS65219 BUCK & LDO regulators   Neil Armstrong
• [PATCH 3/4] config: enable TPS65219 for am64x_evm_a53 boards   Neil Armstrong
• [PATCH 4/4] ARM: dts: k3-am642-sk-u-boot: add PMIC node   Neil Armstrong
• [PATCH] bosch: Add inital board support for ACC   Stefano Babic
• [PATCH v4 0/6] imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Stefano Babic
• [PATCH v2] ARM: dts: imx: Add support for Data Modul i.MX8M Mini eDM SBC   Stefano Babic
• [PATCH v2] board: purism: add the Purism Librem5 phone   Stefano Babic
• [PATCH v4 0/6] imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Stefano Babic
• [PATCH] warp7: Remove UART initialization code   Stefano Babic
• [PATCH] arm: dts: imx8mp: Import GPCv2 subset, HSIOMIX and USB PD   Stefano Babic
• [PATCH v11 01/14] crypto/fsl: Add support for CAAM Job ring driver model   Stefano Babic
• [PATCH] arm: dts: imx8mp: Import GPCv2 subset, HSIOMIX and USB PD   Stefano Babic
• [PATCH] arm: dts: imx8mp: Import GPCv2 subset, HSIOMIX and USB PD   Stefano Babic
• [EXT] Re: [PATCH v11 01/14] crypto/fsl: Add support for CAAM Job ring driver model   Stefano Babic
• [PATCH] ARM: imx: Enable instruction cache early on on i.MX8M   Stefano Babic
• [PATCH v4 0/6] imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Stefano Babic
• [PATCH 3/5] imx8mm-cl-iot-gate: Retrieve the MAC address from EEPROM   Stefano Babic
• [PATCH V2 19/26] imx: imx8ulp_evk: Power down the domains may used in u-boot   Stefano Babic
• [PATCH v2 01/23] mmc: fsl_esdhc_imx: Add i.MX8MP compatible string   Stefano Babic
• [EXT] [PATCH v11 01/14] crypto/fsl: Add support for CAAM Job ring driver model   Stefano Babic
• [PATCH v1 19/24] colibri-imx6ull: fix nand bch geometry   Stefano Babic
• [PATCH V2 19/26] imx: imx8ulp_evk: Power down the domains may used in u-boot   Stefano Babic
• [PATCH v2] ARM: imx: Enable instruction cache early on on i.MX8M   Stefano Babic
• [PATCH 1/2] board: gateworks: venice: add additional levels for dtb name match   Stefano Babic
• Pull request: u-boot-imx u-boot-imx-20220412   Stefano Babic
• Pull request: u-boot-imx u-boot-imx-20220412   Stefano Babic
• [PATCH] verdin-imx8mm, verdin-imx8mp: Fix default systemd console output   Stefano Babic
• imx8mm eLCDIF clock   Stefano Babic
• [PATCH V3] board: bsh: imx8mn_bsh_smm_s2/s2pro: enable DM_SERIAL   Stefano Babic
• [PATCH V2 10/12] configs: drop CONFIG_MMCROOT   Stefano Babic
• [PATCH V2 10/12] configs: drop CONFIG_MMCROOT   Stefano Babic
• [PATCH v3] bosch: Add initial board support for ACC   Stefano Babic
• [PATCH] i.MX8 crypto/fsl: Enable fsl CAAM rng driver   Stefano Babic
• Pull request: u-boot-imx u-boot-imx-20220422   Stefano Babic
• [PATCH v3] board: purism: add the Purism Librem5 phone   Stefano Babic
• RFC: Updating i.MX8M CPU thermal trip-point at runtime   Jacky Bai
• ELDK for Armv8.2   Jerry Van Baren
• ELDK for Armv8.2   Jerry Van Baren
• [PATCH 1/3] arm: dts: Resync dts for BeagleBone and derivatives   Paul Barker
• [PATCH 2/3] board: ti: am335x: Add BBE Lite support   Paul Barker
• [PATCH 3/3] board: ti: am335x: Add support for BBE Extended WiFi   Paul Barker
• Falcon Mode Support For Uncompressed Kernel Images   Nathan Barrett-Morrison
• Falcon Mode Support For Uncompressed Kernel Images   Nathan Barrett-Morrison
• drivers: mtd: spi: Use correct 4 byte mode enablement for ISSI SPI flash devices alongside spi-nor-tiny.c subsystem   Nathan Barrett-Morrison
• drivers: mtd: spi: Allow Quad I/O enablement for ISSI SPI flash devices alongside spi-nor-tiny.c subsystem   Nathan Barrett-Morrison
• Falcon Mode Support For Uncompressed Kernel Images   Nathan Barrett-Morrison
• spl: spi: Raw Kernel Image Support for Falcon Mode Boot Via SPI Devices   Nathan Barrett-Morrison
• spl: spi: Raw Kernel Image Support for Falcon Mode Boot Via SPI Devices   Nathan Barrett-Morrison
• spl: spi: Raw Kernel Image Support for Falcon Mode Boot Via SPI Devices   Nathan Barrett-Morrison
• [PATCH 0/2] usb: dwc3: Fix build without driver model   Alban Bedel
• [PATCH 1/2] usb: dwc3: core: fix warnings when building without driver model   Alban Bedel
• [PATCH 1/2] usb: dwc3: core: Fix warnings when building without driver model   Alban Bedel
• [PATCH 2/2] usb: dwc3: Don't build DM drivers in SPL unless DM USB is available   Alban Bedel
• [PATCH] usb: dwc3-generic: Fix the iMX8MQ support   Alban Bedel
• [PATCH] devres: Use the correct devres implementation in SPL builds   Alban Bedel
• [PATCH 1/2] usb: gadget: Add a config option to set the SPL product ID   Alban Bedel
• [PATCH 2/2] mach-imx: Use CONFIG_SPL_USB_GADGET_PRODUCT_NUM   Alban Bedel
• [PATCH] imx: spl: Default to SPD when booting from USB serial download   Alban Bedel
• [PATCH] usb: dwc3-generic: Fix the iMX8MQ support   Bedel, Alban
• [PATCH 1/2] usb: dwc3: core: Fix warnings when building without driver model   Bedel, Alban
• [PATCH] usb: dwc3-generic: Fix the iMX8MQ support   Bedel, Alban
• [PATCH 0/2] usb: dwc3: Add support for standalone DWC3 nodes   Alban Bedel
• [PATCH 1/2] Revert "usb: dwc3: dwc3-generic: check the parent nodes"   Alban Bedel
• [PATCH 2/2] usb: dwc3: Add support for standalone DWC3 nodes   Alban Bedel
• [PATCH v2 0/2] usb: dwc3: Fix build without driver model   Alban Bedel
• [PATCH v2 1/2] usb: dwc3: core: fix warnings when building without driver model   Alban Bedel
• [PATCH v2 2/2] usb: dwc3: Don't build DM drivers in SPL unless DM USB is available   Alban Bedel
• [PATCH] misc: atsha204a: Fix big endian support   Marek Behún
• [PATCH] arm: mvebu: Add support for reading LD0 and LD1 eFuse   Marek Behún
• [PATCH] tools: kwboot: Replace fstat()+st_size by lseek()+SEEK_END   Marek Behún
• [PATCH 1/5] arm: mvebu: turris_omnia: Fix RESET button message   Marek Behún
• [PATCH 2/5] arm: mvebu: turris_omnia: Define CONFIG_ETHPRIME instead of ethact= ENV   Marek Behún
• [PATCH 3/5] arm: mvebu: turris_omnia: Always enable MMC, SCSI and USB boot targets   Marek Behún
• [PATCH 4/5] arm: mvebu: turris_omnia: Add NVMe to boot targets   Marek Behún
• [PATCH 5/5] arm: mvebu: turris_mox: Add NVMe and SCSI to boot targets   Marek Behún
• [PATCH u-boot-net v4 00/14] u-boot-net refactors, fixes, cleanups   Marek Behún
• [PATCH u-boot-net v4 01/14] net: mdio-uclass: fix type for phy_mode_str and phy_handle_str   Marek Behún
• [PATCH u-boot-net v4 02/14] net: mdio-uclass: use ARRAY_SIZE()   Marek Behún
• [PATCH u-boot-net v4 03/14] net: introduce helpers to get PHY ofnode from MAC   Marek Behún
• [PATCH u-boot-net v4 04/14] net: mdio-uclass: add wrappers for read/write/reset operations   Marek Behún
• [PATCH u-boot-net v4 05/14] treewide: use dm_mdio_read/write/reset() wrappers   Marek Behún
• [PATCH u-boot-net v4 06/14] net: phy: fix parsing wrong property   Marek Behún
• [PATCH u-boot-net v4 07/14] net: introduce helpers to get PHY interface mode from a device/ofnode   Marek Behún
• [PATCH u-boot-net v4 08/14] treewide: Rename PHY_INTERFACE_MODE_COUNT to PHY_INTERFACE_MODE_MAX   Marek Behún
• [PATCH u-boot-net v4 09/14] treewide: Rename PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA   Marek Behún
• [PATCH u-boot-net v4 10/14] phy: Move PHY_INTERFACE_MODE_NA to the beginning of the enum definition   Marek Behún
• [PATCH u-boot-net v4 11/14] net: phy: xilinx: Check interface type in ->config(), not ->probe()   Marek Behún
• [PATCH u-boot-net v4 12/14] net: phy: use ->is_c45 instead of is_10g_interface()   Marek Behún
• [PATCH u-boot-net v4 13/14] bcmgenet, sun8i_emac: Don't connect PHY two times   Marek Behún
• [PATCH u-boot-net v4 14/14] net: phy: don't require PHY interface mode during PHY creation   Marek Behún
• [PATCH] arm: mvebu: Add support for reading LD0 and LD1 eFuse   Marek Behún
• [PATCH] arm: mvebu: a37xx: Add support for writing Security OTP values   Marek Behún
• [PATCH] btrfs: Fix compilation on big endian systems   Marek Behún
• [PATCH 5/6] net: add MV88E61xx DSA driver   Marek Behún
• [PATCH 1/4] board: turris: Move Turris Atsha OTP code to separate file   Marek Behún
• [PATCH 2/4] board: turris: Do not cache Atsha device in BSS   Marek Behún
• [PATCH 3/4] board: turris: Allow to specify first eth idx of first MAC address   Marek Behún
• [PATCH 4/4] board: turris: Rename atsha204a at 64 DT node to crypto at 64   Marek Behún
• [PATCH u-boot-net 0/3] A tiny batch of keystone_net changes   Marek Behún
• [PATCH u-boot-net 1/3] driver: net: ti: keystone_net: Deduplicate code   Marek Behún
• [PATCH u-boot-net 2/3] driver: net: ti: keystone_net: Convert to ofnode functions   Marek Behún
• [PATCH u-boot-net 3/3] driver: net: ti: keystone_net: Change priv member type   Marek Behún
• [PATCH] Fix spelling of "followed" in kwboot.1   Marek Behún
• [PATCH] tools: kwboot: Fix spelling of "followed" in kwboot.1   Marek Behún
• [PATCH u-boot-marvell 8/8] arm: mvebu: turris_omnia: Add support for USB3.0 mode in WWAN MiniPCIe slot   Marek Behún
• [PATCH u-boot-marvell 2/8] arm: mvebu: turris_omnia: Provide env_sf_get_env_addr() function   Marek Behún
• [PATCH u-boot-marvell 00/19] some mvneta changes, cleanups, fixes   Marek Behún
• [PATCH u-boot-marvell 01/19] net: mvneta: Get rid of platdata   Marek Behún
• [PATCH u-boot-marvell 02/19] net: mvneta: Fix 10Mbps speed   Marek Behún
• [PATCH u-boot-marvell 03/19] net: mvneta: Use DM MDIO API for connecting PHY   Marek Behún
• [PATCH u-boot-marvell 04/19] net: mvneta: Remember fixed link instead of PHY address in priv data   Marek Behún
• [PATCH u-boot-marvell 05/19] arm: mvebu: Espressobin: Use DM registered MDIO to configure switch   Marek Behún
• [PATCH u-boot-marvell 06/19] net: mdio-uclass: add dm_phy_find_by_ofnode() helper   Marek Behún
• [PATCH u-boot-marvell 07/19] arm: mvebu: turris_mox: Use DM registered MDIO   Marek Behún
• [PATCH u-boot-marvell 08/19] net: mvneta: Don't register MDIO bus   Marek Behún
• [PATCH u-boot-marvell 09/19] net: mvneta: Fix unused variable warning if DM_GPIO is disabled   Marek Behún
• [PATCH u-boot-marvell 10/19] net: mvneta: Drop one indentation level in mvneta_adjust_link()   Marek Behún
• [PATCH u-boot-marvell 11/19] net: mvneta: Use bool instead of int for boolean variable   Marek Behún
• [PATCH u-boot-marvell 12/19] net: mvneta: Drop unnecessary space   Marek Behún
• [PATCH u-boot-marvell 13/19] net: mvneta: Don't check for CONFIG_PHYLIB   Marek Behún
• [PATCH u-boot-marvell 14/19] net: mvneta: Rename CONFIG_NR_CPUS to MVNETA_NR_CPUS   Marek Behún
• [PATCH u-boot-marvell 15/19] net: mvneta: Convert to use PHY_FIXED for fixed-link   Marek Behún
• [PATCH u-boot-marvell 16/19] net: mvneta: Write PHY address just before enabling HW polling   Marek Behún
• [PATCH u-boot-marvell 17/19] net: mvneta: Drop fixed_link member from private struct   Marek Behún
• [PATCH u-boot-marvell 18/19] net: mvneta: Disable fixed PHY code if PHY_FIXED is not compiled in   Marek Behún
• [PATCH u-boot-marvell 19/19] net: mvneta: Drop unneeded macro   Marek Behún
• [PATCH v3 00/15] Add support for MediaTek MT7621 SoC   Marek Behún
• [PATCH v3 00/15] Add support for MediaTek MT7621 SoC   Marek Behún
• [PATCH v3 00/15] Add support for MediaTek MT7621 SoC   Marek Behún
• [PATCH] cmd: ubi.c: skip part command if right partition is already attached   Alexandre Besnard
• Linking archive to hello_world in standalone   Lists Nick Betteridge
• The contradictory nature of spl_nand_fit_read   Dario Binacchi
• [PATCH 0/5] meson: add clk and adc support for JetHub D1 (j100)   Vyacheslav Bocharov
• [PATCH 1/5] clk: meson: add minimal driver for axg-ao clocks   Vyacheslav Bocharov
• [PATCH 2/5] clk: meson: fix driver name for g12a-ao clocks   Vyacheslav Bocharov
• [PATCH 3/5] adc: meson-saradc: add AXG variant   Vyacheslav Bocharov
• [PATCH 4/5] board: amlogic: jethub j100: enable saradc in dts   Vyacheslav Bocharov
• [PATCH 5/5] board: amlogic: jethub j100: enable saradc in config   Vyacheslav Bocharov
• [PATCH v2 0/6] meson: add clk and adc support for JetHub D1 (j100)   Vyacheslav Bocharov
• [PATCH v2 1/6] clk: meson: add minimal driver for axg-ao clocks   Vyacheslav Bocharov
• [PATCH v2 2/6] clk: meson: fix driver name for g12a-ao clocks   Vyacheslav Bocharov
• [PATCH v2 3/6] clk: meson: update driver for g12a-ao clocks   Vyacheslav Bocharov
• [PATCH v2 4/6] adc: meson-saradc: add AXG variant   Vyacheslav Bocharov
• [PATCH v2 5/6] board: amlogic: jethub j100: enable saradc in dts   Vyacheslav Bocharov
• [PATCH v2 6/6] board: amlogic: jethub j100: enable saradc in config   Vyacheslav Bocharov
• [PATCH v3 0/6] meson: add clk and adc support for JetHub D1 (j100)   Vyacheslav Bocharov
• [PATCH v3 1/6] clk: meson: add minimal driver for axg-ao clocks   Vyacheslav Bocharov
• [PATCH v3 2/6] clk: meson: fix driver name for g12a-ao clocks   Vyacheslav Bocharov
• [PATCH v3 3/6] clk: meson: update driver for g12a-ao clocks   Vyacheslav Bocharov
• [PATCH v3 4/6] adc: meson-saradc: add AXG variant   Vyacheslav Bocharov
• [PATCH v3 5/6] board: amlogic: jethub j100: enable saradc in dts   Vyacheslav Bocharov
• [PATCH v3 6/6] board: amlogic: jethub j100: enable saradc in config   Vyacheslav Bocharov
• [PATCH 1/2] doc: boards: amlogic: update documentation for ADC support for AXG   Vyacheslav Bocharov
• [PATCH 2/2] doc: boards: amlogic: update jethub d1 specifications   Vyacheslav Bocharov
• [PATCH] build: allow a downstream suffix in the version shown during boot   Nicolas Boulenguez
• [PATCH 11/11] doc: ti: Add readme for AM62x SK   Bryan Brattlof
• [PATCH 03/11] soc: ti: k3-socinfo: Add entry for AM62X SoC family   Bryan Brattlof
• [PATCH u-boot-net v3 07/14] net: introduce helpers to get PHY interface mode from a device/ofnode   Patrice CHOTARD
• [PATCH 1/2] Kconfig: Change SYS_MALLOC_F_LEN default to 0x2000   Patrice CHOTARD
• [PATCH] led: Configure LED default-state on boot   Patrice CHOTARD
• [PATCH] led: Configure LED default-state on boot   Patrice CHOTARD
• [PATCH] led: Configure LED default-state on boot   Patrice CHOTARD
• [PATCH 1/8] stm32mp: stm32prog: fix comment   Patrice CHOTARD
• [PATCH 2/8] stm32mp: stm32prog: add CONFIG_CMD_STM32PROG_OTP   Patrice CHOTARD
• [PATCH 3/8] stm32mp: stm32prog: add TEE support in stm32prog command   Patrice CHOTARD
• [PATCH 4/8] stm32mp: stm32prog: add support of STM32IMAGE version 2   Patrice CHOTARD
• [PATCH 5/8] stm32mp: stm32prog: add support of UUID for FIP partition   Patrice CHOTARD
• [PATCH 6/8] stm32mp: stm32prog: handle interruption during the first enumeration   Patrice CHOTARD
• [PATCH 7/8] stm32mp: stm32prog: handle U-Boot script in flashlayout alternate   Patrice CHOTARD
• [PATCH 8/8] stm32mp: stm32prog: handle flashlayout without STM32 image header   Patrice CHOTARD
• [Uboot-stm32] [PATCH] board: st: common: fix the error messages in stboard command   Patrice CHOTARD
• [PATCH 1/2] configs: stm32mp1: set the console variable for extlinux.conf   Patrice CHOTARD
• [PATCH 2/2] configs: stm32mp1: Add support for baudrates higher than 115200 for st-link   Patrice CHOTARD
• [PATCH] ARM: stm32mp: skip ft_system_setup when the soc node is absent   Patrice CHOTARD
• [PATCH] ARM: stm32mp: correctly handle Silicon revision   Patrice CHOTARD
• [PATCH] video: stm32: stm32_ltdc: fix data enable polarity   Patrice CHOTARD
• [PATCH] video: stm32: stm32_ltdc: support several hardware versions   Patrice CHOTARD
• [PATCH] ram: stm32mp1: Conditionally enable ASR   Patrice CHOTARD
• [PATCH] stm32mp: psci: Retain PLL3CR, PLL4CR, RCC_MSSCKSELR across suspend   Patrice CHOTARD
• [PATCH] led: Configure LED default-state on boot   Patrice CHOTARD
• [PATCH 1/3] dm: core: Add DM_FLAG_PROBE_AFTER_BIND flag   Patrice CHOTARD
• [PATCH 2/3] led: Mark device instance with DM_FLAG_PROBE_AFTER_BIND   Patrice CHOTARD
• [PATCH 3/3] led: gpio: Check device compatible string to determine the top level node   Patrice CHOTARD
• [PATCH] led: Configure LED default-state on boot   Patrice CHOTARD
• [PATCH] led: Drop led_default_state()   Patrice CHOTARD
• [PATCH] led: gpio: Use NOP uclass driver for top-level node   Patrice CHOTARD
• [PATCH] clk: stm32mp1: Add missing newline   Patrice CHOTARD
• [PATCH v4 0/3] spi: spi_flash_probe_bus_cs() rely on DT for spi speed and mode   Patrice CHOTARD
• [PATCH v1 12/12] doc: Add documentation for STM32 MCUs   Patrice CHOTARD
• RFC: Updating i.MX8M CPU thermal trip-point at runtime   Andrejs Cainikovs
• RFC: Updating i.MX8M CPU thermal trip-point at runtime   Andrejs Cainikovs
• Passing the index of booting MMC interface from SPL to u-boot.bin   Da Shi Cao
• [PATCH] clk: scmi: fix invalid clock name references   Etienne Carriere
• [PATCH v2] clk: scmi: fix invalid clock name references   Etienne Carriere
• [PATCH v2] clk: scmi: fix invalid clock name references   Etienne Carriere
• [PATCH v3] clk: scmi: fix invalid clock name references   Etienne Carriere
• [PATCH v2] pstore: Support already existing reserved-memory node   Detlev Casanova
• [PATCH v2] pstore: Support already existing reserved-memory node   Detlev Casanova
• [PATCH v2] pstore: Support already existing reserved-memory node   Detlev Casanova
• [PATCH 0/2] Enable booting from SCSI on rockpro64-rk3399.   Vagrant Cascadian
• [PATCH 1/2] rockchip: Enable SCSI in distro bootcmd for rk3399.   Vagrant Cascadian
• [PATCH 2/2] rockchip: Enable AHCI/SCSI/SATA on rockpro64-rk3399.   Vagrant Cascadian
• [PATCH] Fix spelling of "followed" in kwboot.1   Vagrant Cascadian
• [PATCH] tools: kwboot: Fix spelling of "followed" in kwboot.1   Vagrant Cascadian
• [PATCH v2 1/1] riscv: alloc space exhausted   Rick Chen
• [PATCH] nds32: Remove the architecture   Rick Chen
• [PATCH] nds32: Remove the architecture   Rick Chen
• [PATCH] gpio: aspeed: Fix incorrect offset of read back register.   Ryan Chen
• [PATCH v1 0/3] Support various block interfaces for avb and bcb   Andrii Chepurnyi
• [PATCH v1 1/3] cmd: bcb: introduce optional interface parameter to bcb   Andrii Chepurnyi
• [PATCH v1 2/3] cmd: avb: introduce optional interface parameter to avb init   Andrii Chepurnyi
• [PATCH v1 3/3] cmd: avb: remove warning during avb build   Andrii Chepurnyi
• [PATCH v2 0/2] Support various block interfaces for avb and bcb   Andrii Chepurnyi
• [PATCH v2 1/2] cmd: bcb: introduce optional interface parameter to bcb   Andrii Chepurnyi
• [PATCH v2 2/2] cmd: avb: introduce optional interface parameter to avb init   Andrii Chepurnyi
• [PATCH v1 00/12] stm32: add new board support, defconfig and documentation   Patrice Chotard
• [PATCH v1 01/12] configs: stm32f746-disco: Concatenate spl and u-boot binaries   Patrice Chotard
• [PATCH v1 02/12] configs: stm32f746-disco: Rename stm32f746-disco_defconfig to stm32f746-disco_spl_defconfig   Patrice Chotard
• [PATCH v1 03/12] configs: stm32f746-disco: Add stm32f746-disco_defconfig   Patrice Chotard
• [PATCH v1 04/12] configs: stm32f769-disco: Rename stm32f769-disco_defconfig to stm32f769-disco_spl_defconfig   Patrice Chotard
• [PATCH v1 05/12] configs: stm32f769-disco: Add stm32f769-disco_defconfig   Patrice Chotard
• [PATCH v1 06/12] configs: stm32f769-disco: Migrate SPL flags to defconfig   Patrice Chotard
• [PATCH v1 07/12] configs: stm32f746-disco: Migrate SPL flags to defconfig   Patrice Chotard
• [PATCH v1 08/12] board: stm32f746-disco: Fix dram_init() in none SPL config   Patrice Chotard
• [PATCH v1 09/12] configs: stm32f746-disco: use CONFIG_DEFAULT_DEVICE_TREE as fdtfile   Patrice Chotard
• [PATCH v1 10/12] configs: stm32746g-eval: Add stm32746g-eval_defconfig   Patrice Chotard
• [PATCH v1 11/12] configs: stm32746g-eval: Add stm32746g-eval_spl_defconfig   Patrice Chotard
• [PATCH v1 12/12] doc: Add documentation for STM32 MCUs   Patrice Chotard
• [PATCH 1/3] pinctrl: pinctrl_stm32: Update pinmux_mode definition   Patrice Chotard
• [PATCH 2/3] pinctrl: pinctrl_stm32: Use GPIOF_UNKNOWN to indicate not mapped pins   Patrice Chotard
• [PATCH 3/3] gpio: stm32_gpio: Rework GPIO hole management   Patrice Chotard
• [PATCH] phy: stm32-usbphyc: stm32-usbphyc: Add DT phy tuning support   Patrice Chotard
• [PATCH] board: st: stm32mp1: Consider USB cable connected when boot device is USB   Patrice Chotard
• [PATCH v2 00/12] stm32: add new board support, defconfig and documentation   Patrice Chotard
• [PATCH v2 01/12] configs: stm32f746-disco: Concatenate spl and u-boot binaries   Patrice Chotard
• [PATCH v2 02/12] configs: stm32f746-disco: Rename stm32f746-disco_defconfig to stm32f746-disco_spl_defconfig   Patrice Chotard
• [PATCH v2 03/12] configs: stm32f746-disco: Add stm32f746-disco_defconfig   Patrice Chotard
• [PATCH v2 04/12] configs: stm32f769-disco: Rename stm32f769-disco_defconfig to stm32f769-disco_spl_defconfig   Patrice Chotard
• [PATCH v2 05/12] configs: stm32f769-disco: Add stm32f769-disco_defconfig   Patrice Chotard
• [PATCH v2 06/12] configs: stm32f769-disco: Migrate SPL flags to defconfig   Patrice Chotard
• [PATCH v2 07/12] configs: stm32f746-disco: Migrate SPL flags to defconfig   Patrice Chotard
• [PATCH v2 08/12] board: stm32f746-disco: Fix dram_init() in none SPL config   Patrice Chotard
• [PATCH v2 09/12] configs: stm32f746-disco: use CONFIG_DEFAULT_DEVICE_TREE as fdtfile   Patrice Chotard
• [PATCH v2 10/12] configs: stm32746g-eval: Add stm32746g-eval_defconfig   Patrice Chotard
• [PATCH v2 11/12] configs: stm32746g-eval: Add stm32746g-eval_spl_defconfig   Patrice Chotard
• [PATCH v2 12/12] doc: Add documentation for STM32 MCUs   Patrice Chotard
• [PATCH 1/2] Kconfig: Change SYS_MALLOC_F_LEN default to 0x2000   Thomas Chou
• [PATCH] power-domain: Return 0 if ops unimplemented and remove empty functions   Jaehoon Chung
• [PATCH v2 06/23] pmic: pca9450: Add upstream regulators subnode match   Jaehoon Chung
• [PATCH v2 07/23] pmic: pca9450: Add regulator driver   Jaehoon Chung
• [PATCH v2 12/23] power-domain: Return 0 if ops unimplemented and remove empty functions   Jaehoon Chung
• [PATCH v2 14/23] imx: power-domain: Inline arch-imx8m/power-domain.h   Jaehoon Chung
• [PATCH 1/4] mmc: sandbox: Initialize the status register   Jaehoon Chung
• [PATCH 2/4] mmc: sandbox: Initialize backing buffer   Jaehoon Chung
• [PATCH 3/4] mmc: Import some defines for R1 responses   Jaehoon Chung
• [PATCH 4/4] mmc: sandbox: Set the response   Jaehoon Chung
• [PATCH 06/25] s5p_goni, smdkc100: Move some environment settings out of CONFIG   Jaehoon Chung
• [PATCH 1/3] mmc: fsl_esdhc_spl: pre-PBL: check for BOOT signature instead of MBR/DBR   Jaehoon Chung
• [PATCH 2/3] mmc: fsl_esdhc_spl: pre-PBL: fix determining U-Boot size   Jaehoon Chung
• [PATCH 3/3] mmc: fsl_esdhc_spl: Call mmc_init() before booting from SD card   Jaehoon Chung
• [PATCH] mmc: fsl_esdhc_spl: pre-PBL: implement redundancy support   Jaehoon Chung
• [PATCH] mmc: fsl_esdhc_spl: pre-PBL: implement redundancy support   Jaehoon Chung
• Please pull u-boot-pmic master   Jaehoon Chung
• [PATCH 1/4] mmc: sandbox: Initialize the status register   Jaehoon Chung
• [PATCH] mtd: spi-nor-ids: Add support for W25Q512JV   Jaap Crezee
• [PATCH v4 0/6] imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Ariel D'Alessandro
• [PATCH v4 0/6] imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Ariel D'Alessandro
• [PATCH v4 0/6] imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Ariel D'Alessandro
• [PATCH v5 0/7] imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Ariel D'Alessandro
• [PATCH v5 1/7] imx8m: add regs used by GPMI   Ariel D'Alessandro
• [PATCH v5 2/7] imx8m: add init_nand_clk   Ariel D'Alessandro
• [PATCH v5 3/7] phy: nxp-c45-tja11xx: Rename functions to be c45 tja11xx specific   Ariel D'Alessandro
• [PATCH v5 4/7] iopoll: Extend read_poll_timeout macro to support variable parameters   Ariel D'Alessandro
• [PATCH v5 5/7] net: phy: Add phy_modify() accessor   Ariel D'Alessandro
• [PATCH v5 6/7] net: phy: nxp-tja11xx: Add NXP TJA11xx PHY driver   Ariel D'Alessandro
• [PATCH v5 7/7] bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Ariel D'Alessandro
• [RFC PATCH] imx: hab: Support FIT images with external data   Ariel D'Alessandro
• [PATCH V3] board: bsh: imx8mn_bsh_smm_s2/s2pro: enable DM_SERIAL   Ariel D'Alessandro
• [PATCH] ram: stm32mp1: Conditionally enable ASR   Patrick DELAUNAY
• [PATCH] cmd: adc: Add support for storing ADC result in env variable   Patrick DELAUNAY
• [PATCH v2] cmd: adc: Add support for storing ADC result in env variable   Patrick DELAUNAY
• [PATCH] clk: stm32mp1: Add missing newline   Patrick DELAUNAY
• [PATCH] ram: stm32mp1: Conditionally enable ASR   Patrick DELAUNAY
• [PATCH] ram: stm32mp1: Conditionally enable ASR   Patrick DELAUNAY
• [PATCH v1 01/12] configs: stm32f746-disco: Concatenate spl and u-boot binaries   Patrick DELAUNAY
• [PATCH v1 02/12] configs: stm32f746-disco: Rename stm32f746-disco_defconfig to stm32f746-disco_spl_defconfig   Patrick DELAUNAY
• [PATCH v1 03/12] configs: stm32f746-disco: Add stm32f746-disco_defconfig   Patrick DELAUNAY
• [PATCH v1 04/12] configs: stm32f769-disco: Rename stm32f769-disco_defconfig to stm32f769-disco_spl_defconfig   Patrick DELAUNAY
• [PATCH v1 05/12] configs: stm32f769-disco: Add stm32f769-disco_defconfig   Patrick DELAUNAY
• [PATCH v1 06/12] configs: stm32f769-disco: Migrate SPL flags to defconfig   Patrick DELAUNAY
• [PATCH v1 07/12] configs: stm32f746-disco: Migrate SPL flags to defconfig   Patrick DELAUNAY
• [PATCH v1 08/12] board: stm32f746-disco: Fix dram_init() in none SPL config   Patrick DELAUNAY
• [PATCH v1 09/12] configs: stm32f746-disco: use CONFIG_DEFAULT_DEVICE_TREE as fdtfile   Patrick DELAUNAY
• [PATCH v1 10/12] configs: stm32746g-eval: Add stm32746g-eval_defconfig   Patrick DELAUNAY
• [PATCH v1 11/12] configs: stm32746g-eval: Add stm32746g-eval_spl_defconfig   Patrick DELAUNAY
• [PATCH v1 12/12] doc: Add documentation for STM32 MCUs   Patrick DELAUNAY
• [PATCH] stm32mp: psci: Retain PLL3CR, PLL4CR, RCC_MSSCKSELR across suspend   Patrick DELAUNAY
• [PATCH v2] stm32mp: psci: Retain MCUDIVR, PLL3CR, PLL4CR, MSSCKSELR across suspend   Patrick DELAUNAY
• [PATCH v2] ram: stm32mp1: Conditionally enable ASR   Patrick DELAUNAY
• [PATCH 11/11] doc: ti: Add readme for AM62x SK   Andrew Davis
• [PATCH] doc: man-page for the env command   Patrick Delaunay
• [PATCH] board: st: common: fix the error messages in stboard command   Patrick Delaunay
• [PATCH 1/2] configs: stm32mp1: set the console variable for extlinux.conf   Patrick Delaunay
• [PATCH 2/2] configs: stm32mp1: Add support for baudrates higher than 115200 for st-link   Patrick Delaunay
• [PATCH] ARM: stm32mp: skip ft_system_setup when the soc node is absent   Patrick Delaunay
• [PATCH] ARM: stm32mp: correctly handle Silicon revision   Patrick Delaunay
• [PATCH 0/3] stm32mp: handle ck_usbo_48m clock provided by USBPHYC   Patrick Delaunay
• [PATCH 1/3] phy: stm32-usbphyc: add counter of PLL consumer   Patrick Delaunay
• [PATCH 2/3] phy: stm32-usbphyc: usbphyc is a clock provider of ck_usbo_48m clock   Patrick Delaunay
• [PATCH 3/3] clk: stm32mp: handle ck_usbo_48m clock provided by USBPHYC   Patrick Delaunay
• [PATCH] arm: dts: stm32mp15: alignment with v5.18   Patrick Delaunay
• [RFC Patch] arm: kirkwood: nsa310s: Use Marvell uclass mvgbe and PHY driver for DM Ethernet   Tony Dinh
• [RFC Patch] arm: kirkwood: nsa310s: Use Marvell uclass mvgbe and PHY driver for DM Ethernet   Tony Dinh
• [PATCH 1/2] Kconfig: Change SYS_MALLOC_F_LEN default to 0x2000   Tony Dinh
• [RFC Patch] arm: kirkwood: nsa310s: Use Marvell uclass mvgbe and PHY driver for DM Ethernet   Tony Dinh
• [RFC PATCH v2] arm: kirkwood: nsa310s: Use Marvell uclass mvgbe and PHY driver for DM Ethernet   Tony Dinh
• [RFC PATCH v2] arm: kirkwood: nsa310s: Use Marvell uclass mvgbe and PHY driver for DM Ethernet   Tony Dinh
• [PATCH] net: marvell: mvgbe: Set PHY page 0 before phy_connect   Tony Dinh
• [PATCH] arm: kirkwood: nsa310s: Use Marvell uclass mvgbe and PHY driver for DM Ethernet   Tony Dinh
• [PATCH v2] arm: kirkwood: Sheevaplug : Use Marvell uclass mvgbe and PHY driver for Ethernet   Tony Dinh
• [PATCH] net: marvell: mvgbe: Set PHY page 0 before phy_connect   Tony Dinh
• [PATCH] net: marvell: mvgbe: Set PHY page 0 before phy_connect   Tony Dinh
• [PATCH] net: marvell: mvgbe: Set PHY page 0 before phy_connect   Tony Dinh
• [PATCH] net: marvell: mvgbe: Set PHY page 0 before phy_connect   Tony Dinh
• [PATCH] net: marvell: mvgbe: Set PHY page 0 before phy_connect   Tony Dinh
• [PATCH] net: marvell: mvgbe: Set PHY page 0 before phy_connect   Tony Dinh
• [PATCH] ARM: dts: colibri-imx6ull: fix mac address passing   Francesco Dolcini
• [RFC PATCH 0/3] Fix iMX6 DDR configuration issues and update toradex apalis-imx6   Francesco Dolcini
• [RFC PATCH 1/3] mx6: ddr: Restore ralat/walat in write level calibration   Francesco Dolcini
• [RFC PATCH 2/3] mx6: ddr: Wait before issuing the first MRS cmd   Francesco Dolcini
• [RFC PATCH 3/3] board: apalis_imx6: DDR init using mx6_dram_cfg()   Francesco Dolcini
• [RFC PATCH 2/3] mx6: ddr: Wait before issuing the first MRS cmd   Francesco Dolcini
• [RFC PATCH 2/3] mx6: ddr: Wait before issuing the first MRS cmd   Francesco Dolcini
• [PATCH v1 0/2] imx6 ddr initialization fixes   Francesco Dolcini
• [PATCH v1 1/2] mx6: ddr: Restore ralat/walat in write level calibration   Francesco Dolcini
• [PATCH v1 2/2] mx6: ddr: Wait before issuing the first MRS cmd   Francesco Dolcini
• RFC: Adding U-Boot version in FDT chosen node   Francesco Dolcini
• RFC: Adding U-Boot version in FDT chosen node   Francesco Dolcini
• RFC: Adding U-Boot version in FDT chosen node   Francesco Dolcini
• [PATCH] phy: adin: add driver for Analog Devices ADIN1300 PHY   Nate Drude
• ELDK for Armv8.2   Ron Eggler
• Fwd: ELDK for Armv8.2   Ron Eggler
• ELDK for Armv8.2   Ron Eggler
• [PATCH 1/2] sf: dataflash: add support for "extended ID"   Luca Ellero
• [PATCH v2 0/2] sf: dataflash: add support for AT45DB641E   Luca Ellero
• [PATCH v2 1/2] sf: dataflash: add support for "extended ID"   Luca Ellero
• [PATCH v2 2/2] sf: dataflash: add support for AT45DB641E   Luca Ellero
• [PATCH 1/1] riscv: alloc space exhausted   Fabio Estevam
• [PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency   Fabio Estevam
• [PATCH v1 1/2] mx6: ddr: Restore ralat/walat in write level calibration   Fabio Estevam
• [PATCH v1 2/2] mx6: ddr: Wait before issuing the first MRS cmd   Fabio Estevam
• [PATCH] clk: imx8mp: Add ECSPI clocks   Fabio Estevam
• [PATCH 00/13] configs: clean up SDHC marco and MMCROOT   Fabio Estevam
• [PATCH] Kconfig: Fix SYS_MALLOC_F_LEN for i.MX8MQ   Fabio Estevam
• [PATCH] imx: mx7dsabresd: enable DM_SERIAL   Fabio Estevam
• [PATCH V2 1/4] imx: imx8mp_evk: enable CONFIG_DM_SERIAL   Fabio Estevam
• [PATCH V2 3/4] imx: imx8mn_evk: enable CONFIG_DM_SERIAL   Fabio Estevam
• [PATCH V2] imx: mx7dsabresd: enable DM_SERIAL   Fabio Estevam
• [PATCH] warp7: Remove duplicated "mmc dev" command   Fabio Estevam
• [PATCH v2 1/5] imx8mm-cl-iot-gate: Add SPL EEPROM support   Fabio Estevam
• [PATCH v2 2/5] imx8mm-cl-iot-gate: Retrieve the DDR type from EEPROM   Fabio Estevam
• [PATCH v2 3/5] imx8mm-cl-iot-gate: Retrieve the MAC address from EEPROM   Fabio Estevam
• [PATCH v2 4/5] imx8mm-cl-iot-gate: Retrieve the serial number from EEPROM   Fabio Estevam
• [PATCH v2 5/5] imx8mm-cl-iot-gate: Add redundand environment support   Fabio Estevam
• [PATCH 3/5] imx8mm-cl-iot-gate: Retrieve the MAC address from EEPROM   Fabio Estevam
• [PATCH 3/5] imx8mm-cl-iot-gate: Retrieve the MAC address from EEPROM   Fabio Estevam
• [PATCH] ARM: imx: imx8m: Fix board_get_usable_ram_top()   Fabio Estevam
• [PATCH v3] board: gateworks: venice: enable DM_SERIAL   Fabio Estevam
• [PATCH V4 0/4] imx: imx8m: enable DM SERIAL   Fabio Estevam
• [PATCH] arm: dts: imx8mp: add of-list support to common imx8mp-u-boot.dtsi   Fabio Estevam
• [PATCH v3 1/2] board: gateworks: venice: add additional levels for dtb name match   Fabio Estevam
• [PATCH v3 2/2] board: gateworks: venice: add imx8mp-venice-gw740x support   Fabio Estevam
• [PATCH v3] imx: add i.MX8MN DDR3L evk board support   Fabio Estevam
• [PATCH V2] board: bsh: imx8mn_bsh_smm_s2/s2pro: enable DM_SERIAL   Fabio Estevam
• [PATCH] i.MX6SX: crypto/fsl: fix entropy delay value   Fabio Estevam
• [PATCH] crypto/fsl: Clear the memory when blob decapsulation fails   Fabio Estevam
• [PATCH] arm: imx8m: Enable CLK_IMX8M[MNQP] where applicable   Fabio Estevam
• [PATCH 1/2] imx8mn_evk: Enable cache in SPL   Fabio Estevam
• [PATCH 2/2] doc: imx8mn_evk: Do not export ATF_LOAD_ADDR   Fabio Estevam
• [PATCH] crypto/fsl: add invalidate_dcache_range for hash output buffer   Fabio Estevam
• [PATCH 1/1] imx8mm-cl-iot-gate: Remove redundant board_fix_fdt()   Fabio Estevam
• [PATCH v2 1/1] imx8mm-cl-iot-gate: Remove redundant board_fix_fdt()   Fabio Estevam
• im8mn: Loading U-Boot via serial download mode   Fabio Estevam
• im8mn: Loading U-Boot via serial download mode   Fabio Estevam
• im8mn: Loading U-Boot via serial download mode   Fabio Estevam
• [PATCH 1/2] imx8mn_ddr4_evk: Add USB Mass Storage support   Fabio Estevam
• [PATCH 2/2] imx8mn/8mp: Select ENV_IS_NOWHERE   Fabio Estevam
• [PATCH 2/2] imx8mn/8mp: Select ENV_IS_NOWHERE   Fabio Estevam
• [PATCH] spl_imx_romapi: Remove extraneous character   Fabio Estevam
• [PATCH 2/2] imx8mn/8mp: Select ENV_IS_NOWHERE   Fabio Estevam
• [PATCH 2/2] imx8mn/8mp: Select ENV_IS_NOWHERE   Fabio Estevam
• [PATCH 2/2] imx8mn/8mp: Select ENV_IS_NOWHERE   Fabio Estevam
• [PATCH 2/2] imx8mn/8mp: Select ENV_IS_NOWHERE   Fabio Estevam
• [PATCH 2/2] imx8mn/8mp: Select ENV_IS_NOWHERE   Fabio Estevam
• [PATCH v2 1/2] imx8mn_ddr4_evk: Add USB Mass Storage support   Fabio Estevam
• [PATCH v2 2/2] imx8mn/8mp: Allow booting via USB   Fabio Estevam
• [PATCH v3 1/2] imx8mn_ddr4_evk: Add USB Mass Storage support   Fabio Estevam
• [PATCH v3 2/2] imx8mn/8mp: Allow booting via USB   Fabio Estevam
• [PATCH 1/2] mx6slevk: Remove duplicated "mmc dev" command   Fabio Estevam
• [PATCH 2/2] mx6sllevk: Remove duplicated "mmc dev" command   Fabio Estevam
• [PATCH 1/4] ARM: imx: imx8m: Introduce and use UART_BASE_ADDR(n)   Fabio Estevam
• [PATCH 1/4] ARM: imx: imx8m: Introduce and use UART_BASE_ADDR(n)   Fabio Estevam
• [PATCH] ARM: dts: imx: Use 100 kHz I2C2 on Data Modul i.MX8M Mini eDM SBC   Fabio Estevam
• [PATCH v3 2/2] imx8mn/8mp: Allow booting via USB   Fabio Estevam
• [PATCH v3 2/2] imx8mn/8mp: Allow booting via USB   Fabio Estevam
• [PATCH 2/2] mtd: nand: mxs_nand_spl: Fix bad block skipping   Fabio Estevam
• [PATCH] imx8m: fix reading of DDR4 MR registers   Fabio Estevam
• [PATCH] imx8*_venice_defconfig: configure default MMC env device   Fabio Estevam
• [PATCH v1] ARM: dts: imx: Fix iMX6QDL DHCOM PDK2 DTC Warnings   Fabio Estevam
• [PATCH v1] ARM: dts: imx: Fix iMX6QDL DHCOM PDK2 DTC Warnings   Fabio Estevam
• [PATCH] imx8m: fix reading of DDR4 MR registers   Fabio Estevam
• [PATCH] ls10xxx: Use a sane SPL_SYS_MALLOC_F_LEN default   Fabio Estevam
• [PATCH] ls10xxx: Use a sane SPL_SYS_MALLOC_F_LEN default   Fabio Estevam
• [PATCH] imx: drop CONFIG_MXC_UART_BASE   Fabio Estevam
• U-Boot and ethernet regression on mx6cuboxi   Fabio Estevam
• [PATCH 00/15] imx8m: convert to DM_SERIAL   Fabio Estevam
• [PATCH 3/3] efi_loader: setting boot device   Kyle Evans
• [PATCH 3/3] efi_loader: setting boot device   Kyle Evans
• [PATCH 3/3] efi_loader: setting boot device   Kyle Evans
• [PATCH] cmd: bootefi: restore ability to boot arbitrary blob   Kyle Evans
• [PATCH v2] cmd: bootefi: restore ability to boot arbitrary blob   Kyle Evans
• [PATCH] doc: update bootefi man-page   Kyle Evans
• [PATCH] video: stm32: stm32_ltdc: fix data enable polarity   Yannick FERTRE
• [PATCH V3 0/6] Convert COUNTER_FREQUENCY to CONFIG_COUNTER_FREQUENCY   Peng Fan
• [PATCH] video: stm32: stm32_ltdc: support several hardware versions   Yannick Fertre
• [PATCH v7 0/7] fpga: zynqmp: Adding support of loading authenticated images   Adrian Fiergolski
• [PATCH v7 1/7] fpga: add option for loading FPGA secure bitstreams   Adrian Fiergolski
• [PATCH v7 2/7] fpga: add fit_fpga_load function   Adrian Fiergolski
• [PATCH v7 3/7] fpga: xilinx: pass an address of xilinx_desc in fpga_desc   Adrian Fiergolski
• [PATCH v7 4/7] fpga: xilinx: add missed identifier names   Adrian Fiergolski
• [PATCH v7 5/7] fpga: xilinx: pass xilinx_desc pointer address into load() ops   Adrian Fiergolski
• [PATCH v7 6/7] fpga: zynqmp: support loading authenticated images   Adrian Fiergolski
• [PATCH v7 7/7] fpga: zynqmp: support loading encrypted bitfiles   Adrian Fiergolski
• [PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency   Adam Ford
• [PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency   Adam Ford
• [PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency   Adam Ford
• [PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency   Adam Ford
• [PATCH v3] board: gateworks: venice: enable DM_SERIAL   Adam Ford
• [PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency   Adam Ford
• [PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency   Adam Ford
• [PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency   Adam Ford
• [PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency   Adam Ford
• [PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency   Adam Ford
• [PATCH 1/2] imx: Add support for i.MX8MM Beacon SOM 4GB variant   Adam Ford
• [PATCH 2/2] imx: imx8mm_beacon: Enable Micrel PHY   Adam Ford
• [PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency   Adam Ford
• [PATCH] arm: imx8m: Enable CLK_IMX8M[MNQP] where applicable   Adam Ford
• im8mn: Loading U-Boot via serial download mode   Adam Ford
• im8mn: Loading U-Boot via serial download mode   Adam Ford
• imx8mm eLCDIF clock   Adam Ford
• imx8mm eLCDIF clock   Adam Ford
• [PATCH 2/2] imx8mn/8mp: Select ENV_IS_NOWHERE   Adam Ford
• [PATCH 2/3] imx: imx8mq: default select CLK_IMX8MQ   Adam Ford
• [PATCH 04/15] imx: imx8m[m/n]_beacon: Enable SPL_DM_SERIAL   Adam Ford
• [RFC 0/3] imx8m: Remove manual UART clock initialization   Adam Ford
• [RFC 1/3] clk: imx8mm: Add UART clocks   Adam Ford
• [RFC 2/3] serial: mxc: Enable getting and enabling clocks with CCF Composite   Adam Ford
• [RFC 3/3] imx8: imx8mm_beacon: Remove manual UART clock initialization   Adam Ford
• [PATCH 03/15] imx: imx8mm_mx8menlo: Enable DM_SERIAL   Adam Ford
• [PATCH 03/15] imx: imx8mm_mx8menlo: Enable DM_SERIAL   Adam Ford
• [uU PATCH 0/8] Integration of sysfw and tispl with U-Boot build   Neha Malcom Francis
• [uU PATCH 1/8] tools: config: yaml: Add board config class to generate config binaries   Neha Malcom Francis
• [uU PATCH 2/8] binman: etype: sysfw: Add entry type for sysfw   Neha Malcom Francis
• [uU PATCH 3/8] schema: yaml: Add board config schema   Neha Malcom Francis
• [uU PATCH 4/8] config: yaml: j721e_evm: Add board config for J721E EVM   Neha Malcom Francis
• [uU PATCH 5/8] binman: sysfw: Add support for packaging tiboot3.bin and sysfw.itb   Neha Malcom Francis
• [uU PATCH 6/8] binman: dtsi: sysfw: j721e: Use binman to package sysfw.itb   Neha Malcom Francis
• [uU PATCH 7/8] binman: etype: dm: Add entry type for TI DM   Neha Malcom Francis
• [uU PATCH 8/8] binman: dtsi: tispl: j721e: Use binman to package tispl.bin   Neha Malcom Francis
• [RESEND, RFC 0/8] Integration of sysfw and tispl with U-Boot   Neha Malcom Francis
• [RESEND, RFC 1/8] tools: config: yaml: Add board config class to generate config binaries   Neha Malcom Francis
• [RESEND, RFC 2/8] binman: etype: sysfw: Add entry type for sysfw   Neha Malcom Francis
• [RESEND, RFC 3/8] schema: yaml: Add board config schema   Neha Malcom Francis
• [RESEND, RFC 4/8] config: yaml: j721e_evm: Add board config for J721E EVM   Neha Malcom Francis
• [RESEND, RFC 5/8] binman: sysfw: Add support for packaging tiboot3.bin and sysfw.itb   Neha Malcom Francis
• [RESEND, RFC 6/8] binman: dtsi: sysfw: j721e: Use binman to package sysfw.itb   Neha Malcom Francis
• [RESEND, RFC 7/8] binman: etype: dm: Add entry type for TI DM   Neha Malcom Francis
• [RESEND, RFC 8/8] binman: dtsi: tispl: j721e: Use binman to package tispl.bin   Neha Malcom Francis
• [RESEND, RFC 2/8] binman: etype: sysfw: Add entry type for sysfw   Neha Malcom Francis
• [RESEND, RFC 1/8] tools: config: yaml: Add board config class to generate config binaries   Neha Malcom Francis
• [PATCH v3] Allow colon in PXE bootfile URLs   Lyle Franklin
• [PATCH] cmd: bootefi: restore ability to boot arbitrary blob   kevans at FreeBSD.org
• [PATCH v2] cmd: bootefi: restore ability to boot arbitrary blob   kevans at FreeBSD.org
• [PATCH] net: phy: dp83867: Fix a never true comparison   Ramon Fried
• [PATCH v3 2/4] net: mvneta: add SFP TX disable handling   Ramon Fried
• [PATCH 2/2] net: phy: atheros: avoid error in ar803x_of_init() when PHY has no OF node   Ramon Fried
• [PATCH 1/2] net: phy: dp83867: avoid error in dp83867_of_init() when PHY has no OF node   Ramon Fried
• [PATCH] net: phy: dp83867: Fix a never true comparison   Ramon Fried
• [PATCH v2 2/2] net: eth-uclass: Fix data abort when tftp get nonexistent file via usb   Ramon Fried
• [PATCH v1] net: eth-uclass: Fix eth_halt   Ramon Fried
• [PATCH u-boot-net v3 00/14] u-boot-net refactors, fixes, cleanups   Ramon Fried
• [PATCH 1/6] net: mdio-uclass: scan for dm mdio children on post-bind   Ramon Fried
• [PATCH 2/6] net: dsa: move cpu port probe to dsa_post_probe   Ramon Fried
• [PATCH] net: tftp: fix tftp server initialization   Ramon Fried
• TFTP hangs with fragmented IP packets   Ramon Fried
• [PATCH u-boot-net v4 00/14] u-boot-net refactors, fixes, cleanups   Ramon Fried
• [PATCH 1/2] net: fec: prevent undesired de-assertion of phy-reset on request   Ramon Fried
• [PATCH 2/2] net: eth-phy: prevent undesired de-assertion of phy-reset on request   Ramon Fried
• [PATCH] phy: adin: add driver for Analog Devices ADIN1300 PHY   Ramon Fried
• [PATCH] phy: adin: add driver for Analog Devices ADIN1300 PHY   Ramon Fried
• [PATCH v2] Allow colon in PXE bootfile URLs   Ramon Fried
• Fwd: Network U-Boot Custodian Tree | Failed pipeline for next | 19ca279e   Ramon Fried
• [PATCH] net: tftp: fix tftp server initialization   Ramon Fried
• [PATCH] net: tftp: fix tftp server initialization   Ramon Fried
• [PATCH 01/16] net: dm9000: Make accessor names lowercase   Ramon Fried
• [PATCH 02/16] net: dm9000: Replace DM9000_DBG() with debug()   Ramon Fried
• [PATCH 03/16] net: dm9000: Make RxLen and RxStatus lowercase   Ramon Fried
• [PATCH 04/16] net: dm9000: Drop unused dump_regs()   Ramon Fried
• [PATCH 05/16] net: dm9000: Turn DM9000_DMP_PACKET() into a function   Ramon Fried
• [PATCH 06/16] net: dm9000: Drop volatiles   Ramon Fried
• [PATCH 07/16] net: dm9000: Checkpatch cleanup   Ramon Fried
• [PATCH 08/16] net: dm9000: Reorder and staticize   Ramon Fried
• [PATCH 09/16] net: dm9000: Rename board_info to dm9000_priv   Ramon Fried
• [PATCH 10/16] net: dm9000: Drop static device private data   Ramon Fried
• [PATCH 11/16] net: dm9000: Drop dm9000.h and staticize SROM access   Ramon Fried
• [PATCH 12/16] net: dm9000: Pass private data around for IO   Ramon Fried
• [PATCH 13/16] net: dm9000: Split non-DM specific bits from common code   Ramon Fried
• [PATCH 14/16] net: dm9000: Receive one packet per recv call   Ramon Fried
• [PATCH 15/16] net: dm9000: Add DM support   Ramon Fried
• [PATCH 16/16] net: dm9000: Add Kconfig entry   Ramon Fried
• [PATCH u-boot-net 1/3] driver: net: ti: keystone_net: Deduplicate code   Ramon Fried
• [PATCH u-boot-net 2/3] driver: net: ti: keystone_net: Convert to ofnode functions   Ramon Fried
• [PATCH u-boot-net 3/3] driver: net: ti: keystone_net: Change priv member type   Ramon Fried
• [PATCH u-boot-net 0/3] A tiny batch of keystone_net changes   Ramon Fried
• [PATCH v2 17/17] configs: net: dm9000: Move new Kconfig option to board configs   Ramon Fried
• Please pull u-boot-net/next   Ramon Fried
• [PATCH v2 2/2] net: eth-uclass: Fix data abort when tftp get nonexistent file via usb   Ramon Fried
• [PATCH] Add support for TP-Link UE200 dongle   Ramon Fried
• [PATCH v3 14/15] net: mediatek: add support for MediaTek MT7621 SoC   Ramon Fried
• [RESEND PATCH] gpio: rgpio2p: Enhance reading of GPIO pin value   Christoph Fritz
• [RESEND PATCH] gpio: rgpio2p: Enhance reading of GPIO pin value   Christoph Fritz
• CVE-2018-25032 on u-boot zlib   Gan, Yau Wai
• [PATCH v4 4/8] board: Define set_dfu_alt_info() for boards with UEFI capsule update enabled   Sughosh Ganu
• [PATCH v5 0/8] efi: capsule: Capsule Update fixes and enhancements   Sughosh Ganu
• [PATCH v5 1/8] capsule: board: Add information needed for capsule updates   Sughosh Ganu
• [PATCH v5 2/8] capsule: FMP: Populate the image descriptor array from platform data   Sughosh Ganu
• [PATCH v5 3/8] capsule: Put a check for image index before the update   Sughosh Ganu
• [PATCH v5 4/8] efi: Define set_dfu_alt_info() for boards with UEFI capsule update enabled   Sughosh Ganu
• [PATCH v5 5/8] test: capsule: Modify the capsule tests to use GUID values for sandbox   Sughosh Ganu
• [PATCH v5 6/8] FMP: Remove GUIDs for FIT and raw images   Sughosh Ganu
• [PATCH v5 7/8] mkeficapsule: Remove raw and FIT GUID types   Sughosh Ganu
• [PATCH v5 8/8] doc: uefi: Update the capsule update related documentation   Sughosh Ganu
• [PATCH v5 1/8] capsule: board: Add information needed for capsule updates   Sughosh Ganu
• [PATCH v5 4/8] efi: Define set_dfu_alt_info() for boards with UEFI capsule update enabled   Sughosh Ganu
• [PATCH v6 0/8] efi: capsule: Capsule Update fixes and enhancements   Sughosh Ganu
• [PATCH v6 1/8] capsule: board: Add information needed for capsule updates   Sughosh Ganu
• [PATCH v6 2/8] capsule: FMP: Populate the image descriptor array from platform data   Sughosh Ganu
• [PATCH v6 3/8] capsule: Put a check for image index before the update   Sughosh Ganu
• [PATCH v6 4/8] efi: Define set_dfu_alt_info() for boards with UEFI capsule update enabled   Sughosh Ganu
• [PATCH v6 5/8] test: capsule: Modify the capsule tests to use GUID values for sandbox   Sughosh Ganu
• [PATCH v6 6/8] FMP: Remove GUIDs for FIT and raw images   Sughosh Ganu
• [PATCH v6 7/8] mkeficapsule: Remove raw and FIT GUID types   Sughosh Ganu
• [PATCH v6 8/8] doc: uefi: Update the capsule update related documentation   Sughosh Ganu
• [PATCH v6 7/8] mkeficapsule: Remove raw and FIT GUID types   Sughosh Ganu
• [PATCH v6 7/8] mkeficapsule: Remove raw and FIT GUID types   Sughosh Ganu
• [PATCH v6 8/8] doc: uefi: Update the capsule update related documentation   Sughosh Ganu
• [PATCH v6 5/8] test: capsule: Modify the capsule tests to use GUID values for sandbox   Sughosh Ganu
• [PATCH v7 0/8] efi: capsule: Capsule Update fixes and enhancements   Sughosh Ganu
• [PATCH v7 1/8] capsule: board: Add information needed for capsule updates   Sughosh Ganu
• [PATCH v7 2/8] capsule: FMP: Populate the image descriptor array from platform data   Sughosh Ganu
• [PATCH v7 3/8] capsule: Put a check for image index before the update   Sughosh Ganu
• [PATCH v7 4/8] efi: Define set_dfu_alt_info() for boards with UEFI capsule update enabled   Sughosh Ganu
• [PATCH v7 5/8] test: capsule: Modify the capsule tests to use GUID values for sandbox   Sughosh Ganu
• [PATCH v7 6/8] FMP: Remove GUIDs for FIT and raw images   Sughosh Ganu
• [PATCH v7 7/8] mkeficapsule: Remove raw and FIT GUID types   Sughosh Ganu
• [PATCH v7 8/8] doc: uefi: Update the capsule update related documentation   Sughosh Ganu
• [PATCH v8 0/8] efi: capsule: Capsule Update fixes and enhancements   Sughosh Ganu
• [PATCH v8 1/8] capsule: board: Add information needed for capsule updates   Sughosh Ganu
• [PATCH v8 2/8] capsule: FMP: Populate the image descriptor array from platform data   Sughosh Ganu
• [PATCH v8 3/8] capsule: Put a check for image index before the update   Sughosh Ganu
• [PATCH v8 4/8] efi: Define set_dfu_alt_info() for boards with UEFI capsule update enabled   Sughosh Ganu
• [PATCH v8 5/8] test: capsule: Modify the capsule tests to use GUID values for sandbox   Sughosh Ganu
• [PATCH v8 6/8] FMP: Remove GUIDs for FIT and raw images   Sughosh Ganu
• [PATCH v8 7/8] mkeficapsule: Remove raw and FIT GUID types   Sughosh Ganu
• [PATCH v8 8/8] doc: uefi: Update the capsule update related documentation   Sughosh Ganu
• [PATCH v3 00/15] Add support for MediaTek MT7621 SoC   Weijie Gao
• [PATCH v3 01/15] mips: mtmips: add support for MediaTek MT7621 SoC   Weijie Gao
• [PATCH v3 02/15] mips: mtmips: add two reference boards for mt7621   Weijie Gao
• [PATCH v3 03/15] mips: add support for noncached_alloc()   Weijie Gao
• [PATCH v3 04/15] clk: mtmips: add clock driver for MediaTek MT7621 SoC   Weijie Gao
• [PATCH v3 05/15] reset: mtmips: add reset controller support for MediaTek MT7621 SoC   Weijie Gao
• [PATCH v3 06/15] pinctrl: mtmips: add support for MediaTek MT7621 SoC   Weijie Gao
• [PATCH v3 07/15] nand: raw: add support for MediaTek MT7621 SoC   Weijie Gao
• [PATCH v3 08/15] usb: xhci-mtk: add support for MediaTek MT7621 SoC   Weijie Gao
• [PATCH v3 09/15] phy: mtk-tphy: add support for MediaTek MT7621 SoC   Weijie Gao
• [PATCH v3 10/15] spi: add support for MediaTek MT7621 SoC   Weijie Gao
• [PATCH v3 11/15] gpio: add support for MediaTek MT7621 SoC   Weijie Gao
• [PATCH v3 12/15] watchdog: add support for MediaTek MT7621 SoC   Weijie Gao
• [PATCH v3 13/15] mmc: mediatek: add support for MediaTek MT7621 SoC   Weijie Gao
• [PATCH v3 14/15] net: mediatek: add support for MediaTek MT7621 SoC   Weijie Gao
• [PATCH v3 15/15] MAINTAINERS: update maintainer for MediaTek MIPS platform   Weijie Gao
• [PATCH v3 00/15] Add support for MediaTek MT7621 SoC   Weijie Gao
• [PATCH v3 02/15] mips: mtmips: add two reference boards for mt7621   Weijie Gao
• [PATCH v3 00/15] Add support for MediaTek MT7621 SoC   Weijie Gao
• [PATCH v3 00/15] Add support for MediaTek MT7621 SoC   Weijie Gao
• [PATCH] power: domain: ti: Extend use of PTCMD and PTSTAT registers for high PDs   Dave Gerlach
• [PATCH] ram: k3-ddrss: Allow use of dt provided initial frequency   Dave Gerlach
• [PATCH] ram: k3-ddrss: Allow use of dt provided initial frequency   Dave Gerlach
• [PATCH] riscv: Fix build against binutils 2.38   Alexandre Ghiti
• [PATCH 01/11] arm: dts: Add Mercury+ AA1 devicetree   Simon Glass
• [PATCH 02/11] arm: dts: Add Chameleonv3 handoff headers   Simon Glass
• [PATCH 03/11] arm: dts: Add Chameleonv3 devicetree   Simon Glass
• [PATCH 04/11] board: Add Chameleonv3 board dir   Simon Glass
• [PATCH 05/11] config: Add Chameleonv3 config   Simon Glass
• [PATCH 06/11] misc: atsha204a: Increase wake delay by tWHI   Simon Glass
• [PATCH 07/11] sysreset: socfpga: Use parent device for reading base address   Simon Glass
• [PATCH 08/11] socfpga: arria10: Replace delays with busy waiting in cm_full_cfg   Simon Glass
• [PATCH 09/11] socfpga: arria10: Improve bitstream loading speed   Simon Glass
• [PATCH 10/11] socfpga: arria10: Wait for fifo empty after writing bitstream   Simon Glass
• [PATCH 11/11] socfpga: arria10: Allow dcache_enable before relocation   Simon Glass
• [PATCH 02/11] virtio_ring: Add helper to attach vring descriptor   Simon Glass
• [PATCH 03/11] virtio_ring: Maintain a shadow copy of descriptors   Simon Glass
• [PATCH 04/11] virtio_ring: Check used descriptors are chain heads   Simon Glass
• [PATCH 08/11] virtio: sandbox: Bind RNG rather than block device   Simon Glass
• [PATCH 11/11] RFC: test: dm: virtio: Test virtio-rng with faked device   Simon Glass
• [PATCH 2/8] acpi: Fix buffer overflow in do_acpi_dump()   Simon Glass
• [PATCH 1/8] doc: Correct position of gdb '--args' parameter   Simon Glass
• [PATCH 3/8] x86: sandbox: Add missing PCI bar to barinfo   Simon Glass
• [PATCH 4/8] usb: sandbox: Check for string end in copy_to_unicode()   Simon Glass
• [PATCH 5/8] usb: sandbox: Bounds check read from buffer   Simon Glass
• [PATCH 6/8] sound: Fix buffer overflow in square wave generation   Simon Glass
• [PATCH 7/8] test: Fix pointer overrun in dm_test_devm_regmap()   Simon Glass
• [PATCH 8/8] test: dm: devres: Remove use-after-free   Simon Glass
• [PATCH 01/11] virtio_ring: Merge identical variables   Simon Glass
• [PATCH 01/11] sandbox: Set the EFI symbols in linker script   Simon Glass
• [PATCH 02/11] sandbox: Migrate getopt section to linker list   Simon Glass
• [PATCH 03/11] linker_lists: Rename sections to remove . prefix   Simon Glass
• [PATCH 04/11] sandbox: Add support for Address Sanitizer   Simon Glass
• [PATCH 05/11] fuzzing_engine: Add fuzzing engine uclass   Simon Glass
• [PATCH 06/11] test: fuzz: Add framework for fuzzing   Simon Glass
• [PATCH 07/11] sandbox: Decouple program entry from sandbox init   Simon Glass
• [PATCH 08/11] sandbox: Add libfuzzer integration   Simon Glass
• [PATCH 09/11] sandbox: Implement fuzzing engine driver   Simon Glass
• [PATCH 10/11] fuzz: virtio: Add fuzzer for vring   Simon Glass
• [PATCH 10/11] virtio: rng: Check length before copying   Simon Glass
• [PATCH 11/11] RFC: Hack dlmalloc to poison memory   Simon Glass
• [PATCH 05/11] dm: test: virtio: Test the virtio ring   Simon Glass
• [PATCH 06/11] virtio: sandbox: Fix device features bitfield   Simon Glass
• [PATCH 07/11] test: dm: virtio: Test notify before del_vqs   Simon Glass
• [PATCH 09/11] test: dm: virtio: Test virtio device driver probing   Simon Glass
• [PATCH 01/10] Makefile: v2 Allow LTO to be disabled for a build   Simon Glass
• [PATCH] sandbox: Increase default SYS_MALLOC_LEN   Simon Glass
• [PATCH 1/7] binman: Fix unique names having '/.' for images read from files   Simon Glass
• [PATCH 2/7] binman: Collect bintools for images when replacing entries   Simon Glass
• [PATCH 3/7] binman: Don't reset offset/size if image doesn't allow repacking   Simon Glass
• [PATCH 5/7] binman: Create FIT subentries in the FIT section, not its parent   Simon Glass
• [PATCH 6/7] binman: Test replacing non-section entries in FIT subsections   Simon Glass
• [PATCH 7/7] binman: Refuse to replace sections for now   Simon Glass
• [PATCH 1/5] patman: test_util: Fix printing results for failed tests   Simon Glass
• [PATCH 2/5] patman: test_util: Handle nonexistent tests while loading tests   Simon Glass
• [PATCH 3/5] patman: test_util: Use unittest text runner to print test results   Simon Glass
• [PATCH 5/5] patman: test_util: Print test stdout/stderr within test summaries   Simon Glass
• binman and faked blobs failures   Simon Glass
• [PATCH v5 00/34] Initial implementation of standard boot   Simon Glass
• [PATCH v5 01/34] lib: Move string tests to the string module   Simon Glass
• [PATCH v5 02/34] test: Add tests for trailing_strtol()   Simon Glass
• [PATCH v5 03/34] lib: Correct comment formatting to avoid sphinx problems   Simon Glass
• [PATCH v5 04/34] lib: Fix a few bugs in trailing_strtoln()   Simon Glass
• [PATCH v5 05/34] lib: Add a way to find the postiion of a trailing number   Simon Glass
• [PATCH v5 06/34] dm: core: Rename and fix uclass_get_by_name_len()   Simon Glass
• [PATCH v5 07/34] dm: core: Allow finding a uclass device by partial name   Simon Glass
• [PATCH v5 08/34] test: fastboot: Avoid using mmc1   Simon Glass
• [PATCH v5 09/34] test: dm: Restart USB before assuming it is stopped   Simon Glass
• [PATCH v5 10/34] dm: blk: Add a function to return the device type   Simon Glass
• [PATCH v5 11/34] fs: Add a function to set the filesystem type   Simon Glass
• [PATCH v5 12/34] bootstd: Add the concept of a bootflow   Simon Glass
• [PATCH v5 13/34] bootstd: Add the bootstd uclass and core implementation   Simon Glass
• [PATCH v5 14/34] bootstd: Add the bootdev uclass   Simon Glass
• [PATCH v5 15/34] bootstd: Add the bootmeth uclass and helpers   Simon Glass
• [PATCH v5 16/34] bootstd: Add support for bootflows   Simon Glass
• [PATCH v5 17/34] bootstd: Add a bootdev command   Simon Glass
• [PATCH v5 18/34] bootstd: Add a bootflow command   Simon Glass
• [PATCH v5 19/34] bootstd: Add a bootmeth command   Simon Glass
• [PATCH v5 21/34] bootstd: mmc: Add a bootdev driver   Simon Glass
• [PATCH v5 22/34] bootstd: ethernet: Add a bootdev driver   Simon Glass
• [PATCH v5 23/34] bootstd: Add an implementation of distro PXE boot   Simon Glass
• [PATCH v5 24/34] bootstd: Add an implementation of EFI boot   Simon Glass
• [PATCH v5 26/34] bootstd: Add an implementation of EFI bootmgr   Simon Glass
• [PATCH v5 27/34] bootstd: Add a sandbox bootmeth driver   Simon Glass
• [PATCH v5 29/34] bootstd: Add an implementation of script boot   Simon Glass
• [PATCH v5 30/34] bootstd: usb: Add a bootdev driver   Simon Glass
• [PATCH v5 31/34] bootstd: Add tests for bootstd including all uclasses   Simon Glass
• [PATCH v5 32/34] bootstd: Add setup for the bootflow tests   Simon Glass
• [PATCH v5 33/34] bootstd: doc: Add documentation   Simon Glass
• [PATCH v5 34/34] bootstd: Provide a default command   Simon Glass
• [PATCH v3 08/13] misc: Add support for nvmem cells   Simon Glass
• [PATCH 1/2] test/py: Add a way to start sandbox without a device tree   Simon Glass
• [PATCH 2/2] sandbox: Avoid binman error when run without device tree   Simon Glass
• [PATCH v8 00/15] vpl: Introduce a verifying program loader   Simon Glass
• [PATCH v8 00/13] vpl: Introduce a verifying program loader   Simon Glass
• [PATCH v8 01/13] doc: Convert SPL documentation to ReST   Simon Glass
• [PATCH v8 02/13] doc: Expand SPL docs to explain the phase and config   Simon Glass
• [PATCH v8 03/13] test: Tidy up test building with SPL   Simon Glass
• [PATCH v8 04/13] bloblist: Correct Kconfig dependencies   Simon Glass
• [PATCH v8 05/13] avb: Don't build in SPL   Simon Glass
• [PATCH v8 06/13] Makefile: Simplify devicetree rules for SPL/TPL   Simon Glass
• [PATCH v8 07/13] Makefile: Tidy up the TPL build rules   Simon Glass
• [PATCH v8 08/13] Introduce Verifying Program Loader (VPL)   Simon Glass
• [PATCH v8 09/13] vpl: Add Kconfig options for VPL   Simon Glass
• [PATCH v8 10/13] sandbox: Add a build for VPL   Simon Glass
• [PATCH v8 11/13] vpl: Support running vpl tests   Simon Glass
• [PATCH v8 12/13] vpl: Test that VPL runs correctly through to U-Boot proper   Simon Glass
• [PATCH v8 13/13] CI: Run VPL tests   Simon Glass
• minor regression in U-Boot 2022.04   Daniel Golle
• [PATCH v2] pstore: Support already existing reserved-memory node   Daniel Golle
• [PATCH v2] image-fdt: save name of FIT configuration in '/chosen' node   Daniel Golle
• [PATCH v2] pstore: Support already existing reserved-memory node   Daniel Golle
• [PATCH v2] pstore: Support already existing reserved-memory node   Daniel Golle
• Regression? [PATCH 1/2] mtd: call of_platform_populate() for MTD partitions   Daniel Golle
• [PATCH] drivers: usb: dwc3: Add support for AM62 USB wrapper driver   Aswath Govindraju
• [PATCH] include: configs: am**x/j721e/j721s2_evm.h: Move the stack pointer init address in arm64   Aswath Govindraju
• possible off-by-one error on month counting in rtc rv8803 driver   Oliver Graute
• [PATCH v1] rtc: rv8803: fix off-by-one in month counting   Oliver Graute
• [PATCH 4/6] net: fec: add support for DM_MDIO   Tim Harvey
• [PATCH 5/6] net: add MV88E61xx DSA driver   Tim Harvey
• [PATCH 2/2] usb: dwc3: Implement .glue_configure for i.MX8MP   Tim Harvey
• The contradictory nature of spl_nand_fit_read   Tim Harvey
• [PATCH 2/2] usb: dwc3: Implement .glue_configure for i.MX8MP   Tim Harvey
• [PATCH 2/2] usb: dwc3: Implement .glue_configure for i.MX8MP   Tim Harvey
• [PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency   Tim Harvey
• [PATCH] driver: gpio: fix gpio glitch for output-high gpio-hog   Tim Harvey
• [PATCH 5/6] net: add MV88E61xx DSA driver   Tim Harvey
• [PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency   Tim Harvey
• [PATCH v2] imx: power-domain: Add i.MX8MP HSIOMIX driver   Tim Harvey
• [PATCH] imx: power-domain: Add i.MX8MP support   Tim Harvey
• [PATCH] phy: phy-imx8mq-usb: Add support for i.MX8MP USB PHY   Tim Harvey
• [PATCH v2] clk: imx8mp: Fill in DWC3 USB, USB PHY, HSIOMIX clock   Tim Harvey
• [PATCH 2/2] usb: dwc3: Implement .glue_configure for i.MX8MP   Tim Harvey
• [PATCH] arm: dts: imx8mp: Import GPCv2 subset, HSIOMIX and USB PD   Tim Harvey
• [PATCH 5/6] net: add MV88E61xx DSA driver   Tim Harvey
• [PATCH 09/13] configs: imx8mm/n_venice: drop unused SDHC macro   Tim Harvey
• [PATCH 0/2] Add support for Gateworks imx8mp-venice-gw74xx   Tim Harvey
• [PATCH 1/2] board: gateworks: venice: add additional levels for dtb name match   Tim Harvey
• [PATCH 2/2] board: gateworks: venice: add imx8mp-venice-gw740x support   Tim Harvey
• [PATCH] arm: dts: imx8mp: Import GPCv2 subset, HSIOMIX and USB PD   Tim Harvey
• TFTP hangs with fragmented IP packets   Tim Harvey
• [PATCH v2] imx8m{m,n}_venice: update env memory layout   Tim Harvey
• [PATCH v2] configs: imx8m{m,n}_venice_defconfig: add usb support   Tim Harvey
• [PATCH v2] board: gateworks: venice: enable DM_SERIAL   Tim Harvey
• [PATCH v2] board: gateworks: venice: use common GSC driver   Tim Harvey
• [PATCH v2] arm: dts: imx8m*-venice: add gpio hog support   Tim Harvey
• [PATCH v2] imx8m{m,n}_venice_defconfig: add DT overlay support   Tim Harvey
• [PATCH v2] board: gateworks: venice: enable DM_SERIAL   Tim Harvey
• [PATCH v2] imx8m{m,n}-venice-gw7902: add support for GPY111 phy   Tim Harvey
• [PATCH] imx8m{m, n}_venice_defconfig: enable md5sum and crc32 commands   Tim Harvey
• [PATCH v2] board: gateworks: gw_ventana: use comomn GSC driver   Tim Harvey
• Pull request: u-boot-imx u-boot-imx-20220412   Tim Harvey
• [PATCH v2 1/2] board: gateworks: venice: add additional levels for dtb name match   Tim Harvey
• [PATCH v2 2/2] board: gateworks: venice: add imx8mp-venice-gw740x support   Tim Harvey
• [PATCH 1/2] board: gateworks: venice: add additional levels for dtb name match   Tim Harvey
• [PATCH] pci: imx: use vpcie-supply if defined by device-tree   Tim Harvey
• [PATCH] pci: imx: remove weak overrides no longer used   Tim Harvey
• RFC: Updating i.MX8M CPU thermal trip-point at runtime   Tim Harvey
• EXT: [PATCH] pci: imx: use vpcie-supply if defined by device-tree   Tim Harvey
• [PATCH v2] board: gateworks: venice: enable DM_SERIAL   Tim Harvey
• [PATCH V3 3/4] imx: imx8mn_evk: enable CONFIG_DM_SERIAL   Tim Harvey
• [PATCH V3 3/4] imx: imx8mn_evk: enable CONFIG_DM_SERIAL   Tim Harvey
• [PATCH v2] board: gateworks: venice: enable DM_SERIAL   Tim Harvey
• [PATCH v3] board: gateworks: venice: enable DM_SERIAL   Tim Harvey
• [PATCH v3] board: gateworks: venice: enable DM_SERIAL   Tim Harvey
• [PATCH v4] board: gateworks: venice: use common GSC driver   Tim Harvey
• [PATCH v3 1/2] board: gateworks: venice: add additional levels for dtb name match   Tim Harvey
• [PATCH v3 2/2] board: gateworks: venice: add imx8mp-venice-gw740x support   Tim Harvey
• [PATCH 5/6] net: add MV88E61xx DSA driver   Tim Harvey
• [PATCH] arm: dts: imx8mp: add of-list support to common imx8mp-u-boot.dtsi   Tim Harvey
• [PATCH v3 2/2] imx8mn/8mp: Allow booting via USB   Tim Harvey
• [PATCH V2 20/26] imx: dynamic setting mmcdev and mmcroot   Tim Harvey
• [PATCH v3 2/2] imx8mn/8mp: Allow booting via USB   Tim Harvey
• [PATCH] imx8*_venice_defconfig: configure default MMC env device   Tim Harvey
• [PATCH] net: e1000: Depend on CONFIG_PCI   Tim Harvey
• [PATCH] board: gateworks: venice: add fixup for GW73xx-C+   Tim Harvey
• U-Boot and ethernet regression on mx6cuboxi   Tim Harvey
• [PATCH] configs: imx8m{m, n}_venice: remove unneeded CONFIG_FEC_MXC_PHYADDR   Tim Harvey
• [PATCH] configs: imx8mp_venice: add FEC_QUIRK_ENET_MAC   Tim Harvey
• [PATCH] configs: imx8mp_venice: add FEC_QUIRK_ENET_MAC   Tim Harvey
• [PATCH] configs: remove FEC_QUIRK_ENET_MAC from imx8m configs   Tim Harvey
• [PATCH] board: gateworks: venice: enable SPL_DM_SERIAL   Tim Harvey
• [PATCH] board: gateworks: gw_ventana: add support for GPY111 PHY   Tim Harvey
• [PATCH] board: gateworks: gw_ventana: remove obsolete file   Tim Harvey
• [PATCH] tools/imagetool: Fix segfault when tparams->verify_header is NULL   Nicolas Heemeryck
• [PATCH] dt-bindings: nvmem: u-boot, env: add Broadcom's variant binding   Rob Herring
• [PATCH 0/6] introduce Arm FF-A support   Rob Herring
• RFC: Adding U-Boot version in FDT chosen node   Rob Herring
• [PATCH 1/2] Kconfig: Change SYS_MALLOC_F_LEN default to 0x2000   Masami Hiramatsu
• [PATCH] configs: Enable EXT4 and ISO partitions for the DeveloperBox   Masami Hiramatsu
• [PATCH v6 8/8] doc: uefi: Update the capsule update related documentation   Masami Hiramatsu
• [PATCH v7 2/8] capsule: FMP: Populate the image descriptor array from platform data   Masami Hiramatsu
• [PATCH v7 4/8] efi: Define set_dfu_alt_info() for boards with UEFI capsule update enabled   Masami Hiramatsu
• [PATCH v7 8/8] doc: uefi: Update the capsule update related documentation   Masami Hiramatsu
• [PATCH] board: synquacer: developerbox: Remove Masami from MAINTAINERS   Masami Hiramatsu
• [PATCH 0/6] introduce Arm FF-A support   Sudeep Holla
• [PATCH v2 06/23] sunxi: Skip non-DM UART pin setup when PINCTRL=y   Samuel Holland
• [PATCH v2 15/23] sunxi: Remove non-DM I2C clock/pin setup from U-Boot   Samuel Holland
• [PATCH v2 17/23] i2c: sun8i_rsb: Only do non-DM pin setup for non-DM I2C   Samuel Holland
• [PATCH v2 00/23] sunxi: Add and use a pinctrl driver   Samuel Holland
• [PATCH 4/4] i2c: sun8i_rsb: Add support for DM clocks and resets   Samuel Holland
• [PATCH 1/2] sunxi: Skip MMC0 init when its pinmux conflicts with UART0   Samuel Holland
• [PATCH 2/2] mmc: sunxi: Remove unnecessary pinmux option dependency   Samuel Holland
• [PATCH] sunxi: fix initial environment loading without MMC   Samuel Holland
• [PATCH] clk: sunxi: h6_r: Correct the driver name   Samuel Holland
• [PATCH] arm: sunxi: dram: restore previous value in DRAM   Samuel Holland
• [PATCH v1] drivers: spi: spi-sunxi: Add Kconfig option for sun4i_spi_parse_pins   Samuel Holland
• [PATCH 00/12] sunxi: Devicetree sync from Linux v5.18-rc1   Samuel Holland
• [PATCH 01/12] dt-bindings: sunxi: Update clock/reset binding headers   Samuel Holland
• [PATCH 02/12] ARM: dts: sunxi: Remove unused devicetree headers   Samuel Holland
• [PATCH 03/12] ARM: dts: sun4i: Sync from Linux v5.18-rc1   Samuel Holland
• [PATCH 04/12] ARM: dts: sun7i: Sync from Linux v5.18-rc1   Samuel Holland
• [PATCH 05/12] ARM: dts: sunxi: A13/A31/A23/A33: Sync from Linux v5.18-rc1   Samuel Holland
• [PATCH 06/12] ARM: dts: sun9i: Sync from Linux v5.18-rc1   Samuel Holland
• [PATCH 07/12] ARM: dts: sun8i: A83T: Sync from Linux v5.18-rc1   Samuel Holland
• [PATCH 08/12] ARM: dts: sunxi: H2+/H3/H5: Sync from Linux v5.18-rc1   Samuel Holland
• [PATCH 09/12] ARM: dts: sun8i: V3/V3s/S3: Sync from Linux v5.18-rc1   Samuel Holland
• [PATCH 10/12] ARM: dts: sun8i: R40/T3: Sync from Linux v5.18-rc1   Samuel Holland
• [PATCH 11/12] ARM: dts: sun50i: A64: Sync from Linux v5.18-rc1   Samuel Holland
• [PATCH 12/12] ARM: dts: sun50i: H6: Sync from Linux v5.18-rc1   Samuel Holland
• [PATCH 00/12] sunxi: Devicetree sync from Linux v5.18-rc1   Samuel Holland
• [PATCH 1/2] timers: atmel_tcb: introduce CONFIG_SPL_ATMEL_TCB   Eugen Hristev
• [PATCH 2/2] timers: atmel_pit: introduce CONFIG_SPL_ATMEL_PIT_TIMER   Eugen Hristev
• [PATCH v2] include: configs: at91/sam: remove stray #ifdef/#else   Eugen Hristev
• [PATCH] misc: i2c_eeprom: fix at24c32 offset_len   Eugen Hristev
• [PATCH 1/2] misc: i2c_eeprom: add support for microchip 24aa025e48   Eugen Hristev
• [PATCH 2/2] ARM: dts: at91: sam9x60ek: fix eeprom compatible   Eugen Hristev
• [RFC PATCH v2] mips: dts: add initial support for ls1c300 SoC   Du Huanpeng
• [RFC PATCH] mips: dts: add initial support for ls1c300 SoC   Du Huanpeng
• [PATCH] tools: add boot/ to .gitignore   Du Huanpeng
• [PATCH v3] mips: dts: add initial support for ls1c300 SoC   Du Huanpeng
• [PATCH] mips: dts: mt7620: rename nodes to generic names   Du Huanpeng
• [EXT] Re: [PATCH v11 01/14] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• [EXT] [PATCH v11 01/14] crypto/fsl: Add support for CAAM Job ring driver model   Gaurav Jain
• [PATCH] i.MX6SX: crypto/fsl: fix entropy delay value   Gaurav Jain
• [PATCH] crypto/fsl: Clear the memory when blob decapsulation fails   Gaurav Jain
• [PATCH] crypto/fsl: add invalidate_dcache_range for hash output buffer   Gaurav Jain
• [PATCH] crypto/fsl: Add support for black key blob   Gaurav Jain
• [PATCH v2] crypto/fsl: add invalidate_dcache_range for hash output buffer   Gaurav Jain
• [PATCH 1/2] imx: Update FSL_MFGPROT config for iMX8M   Gaurav Jain
• [PATCH 2/2] imx: Fix build error   Gaurav Jain
• [PATCH] i.MX8 crypto/fsl: Enable fsl CAAM rng driver   Gaurav Jain
• [PATCH v2] i.MX8 crypto/fsl: Enable fsl CAAM rng driver   Gaurav Jain
• [EXT] Re: [PATCH] i.MX8 crypto/fsl: Enable fsl CAAM rng driver   Gaurav Jain
• [PATCH] crypto/fsl: fsl_rsa: Fix dcache issue in the driver   Gaurav Jain
• [EXT] fsl_hash.c: Alignment problem when using caam_hash() for FIT images   Gaurav Jain
• [EXT] [PATCH] crypto: fsl_hash: Remove unnecessary alignment check in caam_hash()   Gaurav Jain
• [PATCH v2] crypto/fsl: fsl_rsa: Fix dcache issue in the driver   Gaurav Jain
• pull request of u-boot-mpc85xx, fsl-qoriq for v2022.07   Priyanka Jain
• [PATCH v4 00/12] Prepare RK3066 U-boot support   Johan Jonker
• [PATCH v4 01/12] rockchip: move ROCKCHIP_STIMER_BASE to Kconfig   Johan Jonker
• [PATCH v4 02/12] rockchip: spl: change call condition rockchip_stimer_init()   Johan Jonker
• [PATCH v4 03/12] rockchip: tpl: change call condition rockchip_stimer_init()   Johan Jonker
• [PATCH v4 04/12] rockchip: spl: replace ifdef by IS_ENABLED for timer_init() call condition   Johan Jonker
• [PATCH v4 05/12] rockchip: tpl: use IS_ENABLED for timer_init() call condition   Johan Jonker
• [PATCH v4 06/12] rockchip: timer: add OF_PLATDATA support for dw-apb-timer   Johan Jonker
• [PATCH v4 07/12] rockchip: timer: dw-apb-timer: fix whitespace in U_BOOT_DRIVER structure   Johan Jonker
• [PATCH v4 08/12] rockchip: mmc: rockchip_dw_mmc: fix ciu clock index   Johan Jonker
• [PATCH v4 09/12] rockchip: mmc: rockchip_dw_mmc: add rk3066/rk3188 support   Johan Jonker
• [PATCH v4 10/12] rockchip: serial: restyle the serial_rockchip.c driver   Johan Jonker
• [PATCH v4 11/12] rockchip: serial: move driver alias to serial_rockchip.c   Johan Jonker
• [PATCH v4 12/12] rockchip: serial: Kconfig: add select SYS_NS16550 to config ROCKCHIP_SERIAL   Johan Jonker
• [PATCH v9 00/16] Add Rikomagic MK808 board   Johan Jonker
• [PATCH v9 01/16] rockchip: rk3066-power: sync power domain dt-binding header from Linux   Johan Jonker
• [PATCH v9 02/16] rockchip: rk3066: add grf header file   Johan Jonker
• [PATCH v9 03/16] rockchip: rk3066: add clock driver for rk3066 soc   Johan Jonker
• [PATCH v9 04/16] rockchip: rk3066: add rk3066 pinctrl driver   Johan Jonker
• [PATCH v9 05/16] rockchip: rk3066: add sdram driver   Johan Jonker
• [PATCH v9 06/16] arm: dts: rockchip: fix rk3xxx-u-boot.dtsi   Johan Jonker
• [PATCH v9 07/16] arm: dts: rockchip: fix include rk3xxx-u-boot.dtsi   Johan Jonker
• [PATCH v9 08/16] arm: dts: rockchip: add rk3066a.dtsi   Johan Jonker
• [PATCH v9 09/16] arm: dts: rockchip: add rk3066a-mk808.dts   Johan Jonker
• [PATCH v9 10/16] rockchip: rk3066: add include   Johan Jonker
• [PATCH v9 11/16] rockchip: rk3066: add rk3066_common.h include   Johan Jonker
• [PATCH v9 12/16] rockchip: rk3066: add core support   Johan Jonker
• [PATCH v9 13/16] rockchip: rk3066: add Rikomagic MK808 board   Johan Jonker
• [PATCH v9 14/16] rockchip: rk3066: add mk808_defconfig   Johan Jonker
• [PATCH v9 15/16] rockchip: tools: add rk3066 support to rkcommon.c   Johan Jonker
• [PATCH v9 16/16] doc: rockchip: add rk3066 Rikomagic MK808   Johan Jonker
• [PATCH v4 09/12] rockchip: mmc: rockchip_dw_mmc: add rk3066/rk3188 support   Johan Jonker
• [PATCH v5 00/13] Prepare RK3066 U-boot support   Johan Jonker
• [PATCH v5 01/13] rockchip: move ROCKCHIP_STIMER_BASE to Kconfig   Johan Jonker
• [PATCH v5 02/13] rockchip: spl: change call condition rockchip_stimer_init()   Johan Jonker
• [PATCH v5 03/13] rockchip: tpl: change call condition rockchip_stimer_init()   Johan Jonker
• [PATCH v5 04/13] rockchip: tpl: use IS_ENABLED for timer_init() call condition   Johan Jonker
• [PATCH v5 05/13] rockchip: timer: add OF_PLATDATA support for dw-apb-timer   Johan Jonker
• [PATCH v5 06/13] rockchip: timer: dw-apb-timer: fix whitespace in U_BOOT_DRIVER structure   Johan Jonker
• [PATCH v5 07/13] rockchip: mmc: rockchip_dw_mmc: fix ciu clock index   Johan Jonker
• [PATCH v5 08/13] rockchip: mmc: rockchip_dw_mmc: add rk3066/rk3188 support   Johan Jonker
• [PATCH v5 09/13] rockchip: serial: restyle the serial_rockchip.c driver   Johan Jonker
• [PATCH v5 10/13] rockchip: serial: move driver alias to serial_rockchip.c   Johan Jonker
• [PATCH v5 11/13] rockchip: serial: rename U_BOOT_DRIVER name to rockchip_uart   Johan Jonker
• [PATCH v5 12/13] rockchip: serial: Kconfig: add select SYS_NS16550 to config ROCKCHIP_SERIAL   Johan Jonker
• [PATCH v5 13/13] rockchip: serial: Kconfig: allow ROCKCHIP_SERIAL enabled in TPL   Johan Jonker
• [PATCH v9 16/16] doc: rockchip: add rk3066 Rikomagic MK808   Johan Jonker
• [PATCH v10 00/16] Add Rikomagic MK808 board   Johan Jonker
• [PATCH v10 01/16] rockchip: rk3066-power: sync power domain dt-binding header from Linux   Johan Jonker
• [PATCH v10 02/16] rockchip: rk3066: add grf header file   Johan Jonker
• [PATCH v10 03/16] rockchip: rk3066: add clock driver for rk3066 soc   Johan Jonker
• [PATCH v10 04/16] rockchip: rk3066: add rk3066 pinctrl driver   Johan Jonker
• [PATCH v10 05/16] rockchip: rk3066: add sdram driver   Johan Jonker
• [PATCH v10 06/16] arm: dts: rockchip: fix rk3xxx-u-boot.dtsi   Johan Jonker
• [PATCH v10 07/16] arm: dts: rockchip: fix include rk3xxx-u-boot.dtsi   Johan Jonker
• [PATCH v10 08/16] arm: dts: rockchip: add rk3066a.dtsi   Johan Jonker
• [PATCH v10 09/16] arm: dts: rockchip: add rk3066a-mk808.dts   Johan Jonker
• [PATCH v10 10/16] rockchip: tools: add rk3066 support to rkcommon.c   Johan Jonker
• [PATCH v10 11/16] rockchip: rk3066: add core support   Johan Jonker
• [PATCH v10 12/16] rockchip: rk3066: add Rikomagic MK808 board   Johan Jonker
• [PATCH v10 13/16] rockchip: rk3066: add mk808_defconfig   Johan Jonker
• [PATCH v10 14/16] doc: rockchip: restyle rockchip.rst   Johan Jonker
• [PATCH v10 15/16] doc: rockchip: add px30/rk3326 boards and examples   Johan Jonker
• [PATCH v10 16/16] doc: rockchip: add rk3066 Rikomagic MK808   Johan Jonker
• [PATCH v3 09/12] arm: dts: rockchip: sync rk3288.dtsi from Linux   Johan Jonker
• [PATCH v4 01/14] rockchip: rk3228-power: sync power domain dt-binding header from Linux   Johan Jonker
• [PATCH v4 02/14] rockchip: rk3228-cru: sync the clock dt-binding header from Linux   Johan Jonker
• [PATCH v4 03/14] arm: dts: rockchip: move all rk322x u-boot specific properties in separate dtsi files   Johan Jonker
• [PATCH v4 04/14] arm: dts: rockchip: sync rk322x.dtsi from Linux   Johan Jonker
• [PATCH v4 05/14] arm: dts: rockchip: sync rk3229-evb.dts from Linux   Johan Jonker
• [PATCH v4 06/14] rockchip: rk3288-power: sync power domain dt-binding header from Linux   Johan Jonker
• [PATCH v4 07/14] rockchip: rk3288-cru: sync the clock dt-binding header from Linux   Johan Jonker
• [PATCH v4 08/14] arm: dts: rockchip: move all rk3288 u-boot specific properties in separate dtsi files   Johan Jonker
• [PATCH v4 09/14] arm: dts: rockchip: sync rk3288.dtsi from Linux   Johan Jonker
• [PATCH v4 10/14] arm: dts: rockchip: sync rk3288 DT boards from Linux   Johan Jonker
• [PATCH v4 11/14] arm: dts: rockchip: sync rk3288-veyron DT from Linux   Johan Jonker
• [PATCH v4 12/14] rockchip: fix boot_devices constants   Johan Jonker
• [PATCH v4 13/14] board: google: veyron: add more DT files to MAINTAINERS   Johan Jonker
• [PATCH v4 14/14] board: rk3288: add more DT files to MAINTAINERS   Johan Jonker
• [PATCH v1] rockchip: video: rk_edp: add more rk3288 edp node options   Johan Jonker
• [PATCH v1] rockchip: video: mipi: add more compatible strings for rk3288/rk3399   Johan Jonker
• [PATCH v11 00/16] Add Rikomagic MK808 board   Johan Jonker
• [PATCH v11 01/16] rockchip: rk3066-power: sync power domain dt-binding header from Linux   Johan Jonker
• [PATCH v11 02/16] rockchip: rk3066: add grf header file   Johan Jonker
• [PATCH v11 03/16] rockchip: rk3066: add clock driver for rk3066 soc   Johan Jonker
• [PATCH v11 04/16] rockchip: rk3066: add rk3066 pinctrl driver   Johan Jonker
• [PATCH v11 05/16] rockchip: rk3066: add sdram driver   Johan Jonker
• [PATCH v11 06/16] arm: dts: rockchip: fix rk3xxx-u-boot.dtsi   Johan Jonker
• [PATCH v11 07/16] arm: dts: rockchip: fix include rk3xxx-u-boot.dtsi   Johan Jonker
• [PATCH v11 08/16] arm: dts: rockchip: add rk3066a.dtsi   Johan Jonker
• [PATCH v11 09/16] arm: dts: rockchip: add rk3066a-mk808.dts   Johan Jonker
• [PATCH v11 10/16] rockchip: tools: add rk3066 support to rkcommon.c   Johan Jonker
• [PATCH v11 11/16] rockchip: rk3066: add core support   Johan Jonker
• [PATCH v11 12/16] rockchip: rk3066: add Rikomagic MK808 board   Johan Jonker
• [PATCH v11 13/16] rockchip: rk3066: add mk808_defconfig   Johan Jonker
• [PATCH v11 14/16] doc: rockchip: restyle rockchip.rst   Johan Jonker
• [PATCH v11 15/16] doc: rockchip: add px30/rk3326 boards and examples   Johan Jonker
• [PATCH v11 16/16] doc: rockchip: add rk3066 Rikomagic MK808   Johan Jonker
• [PATCH] rockchip: include: configs: remove unused configs for tag and size   Johan Jonker
• [RFC PATCH 2/8] rockchip: Add binman definitions for final images   Johan Jonker
• [PATCH v1 1/4] rockchip: usb: gadget: add rk3066 product id   Johan Jonker
• [PATCH v1 2/4] rockchip: usb: phy: add rk3066/rk3188 support   Johan Jonker
• [PATCH v1 3/4] rockchip: board: change condition board_usb_init() in function   Johan Jonker
• [PATCH v1 4/4] arm: dts: rockchip: remove usb-phy fallback string for rk3188   Johan Jonker
• [PATCH v5 07/12] efi_loader: disk: a helper function to create efi_disk objects from udevice   Johan Jonker
• [PATCH v2] soc: xilinx: versal: fix out of bounds array access   Jorge Ramirez-Ortiz, Foundries
• Jumping to U-boot / Image entry point: 0x1780_0000   Damien KIRK
• [PATCHv3 0/3] Add support for sam9x60_curiosity   Durai Manickam KR
• [PATCHv3 1/3] board: Add sam9x60_curiosity support   Durai Manickam KR
• [PATCHv3 2/3] ARM: dts: Add device tree files for sam9x60_curiosity   Durai Manickam KR
• [PATCHv3 3/3] configs: Add sam9x60_curiosity_mmc_defconfig   Durai Manickam KR
• [PATCH] ARM: dts: sam9x60: Add pit64b node   Durai Manickam KR
• [PATCH 2/2] nvmem: add driver handling U-Boot environment variables   Srinivas Kandagatla
• [PATCH 2/2] nvmem: add driver handling U-Boot environment variables   Srinivas Kandagatla
• [PATCH 06/25] s5p_goni, smdkc100: Move some environment settings out of CONFIG   Minkyu Kang
• [PATCH v2 06/23] sunxi: Skip non-DM UART pin setup when PINCTRL=y   Karen
• [PATCH] fdt: don't set linux,phandle   John Keeping
• [PATCH] doc: board: apple: Mention M1 Ultra support   Mark Kettenis
• [PATCH 1/1] arm: apple: Add M1 Ultra support   Mark Kettenis
• tools/image-host.c build error   Mark Kettenis
• [PATCH] usb: xhci-dwc3: Support role switch default role   Mark Kettenis
• [PATCH] arm: apple: Don't clear framebuffer   Mark Kettenis
• [PATCH] arm: apple: Point stdout-path to framebuffer when keyboard present   Mark Kettenis
• RFC: Adding U-Boot version in FDT chosen node   Mark Kettenis
• RFC: Adding U-Boot version in FDT chosen node   Mark Kettenis
• efi_loader breakage   Mark Kettenis
• [PATCH] power: domain: apple: Restore reset ops that return 0   Mark Kettenis
• [PATCH v5 00/12] efi_loader: more tightly integrate UEFI disks to driver model   Mark Kettenis
• [PATCH] tools: mkimage: Avoid ENODATA in host tools   Mark Kettenis
• [PATCH] power: domain: apple: Restore reset ops that return 0   Mark Kettenis
• [PATCH] power: domain: apple: Restore reset ops that return 0   Mark Kettenis
• efi_loader breakage   Mark Kettenis
• [PATCH v5 00/12] efi_loader: more tightly integrate UEFI disks to driver model   Mark Kettenis
• [PATCH v5 00/12] efi_loader: more tightly integrate UEFI disks to driver model   Mark Kettenis
• [PATCH] efi_loader: disk: allow blk devices even without UCLASS_PARTITION   Mark Kettenis
• [PATCH v5 00/17] enable menu-driven boot device selection   Mark Kettenis
• [PATCH v5 11/17] bootmenu: add Kconfig option not to enter U-Boot console   Mark Kettenis
• [PATCH 00/12] sunxi: Devicetree sync from Linux v5.18-rc1   Mark Kettenis
• [PATCH 00/12] sunxi: Devicetree sync from Linux v5.18-rc1   Mark Kettenis
• [PATCH 0/6] introduce Arm FF-A support   Abdellatif El Khlifi
• [PATCH 0/6] introduce Arm FF-A support   Abdellatif El Khlifi
• [PATCH 0/6] introduce Arm FF-A support   Abdellatif El Khlifi
• [PATCH 0/6] introduce Arm FF-A support   Abdellatif El Khlifi
• [PATCH] lib/date: Make rtc_mktime and mktime64 Y2038-ready   Jan Kiszka
• [PATCH] efi_loader: Improve console screen clearing and reset   Jan Kiszka
• [PATCH] env: Couple networking-related variable flags to CONFIG_NET   Jan Kiszka
• [PATCH v3 2/2] usb: dwc3: Add support for usb3-phy PHY configuration   Jan Kiszka
• [PATCH v3 2/2] usb: dwc3: Add support for usb3-phy PHY configuration   Jan Kiszka
• [PATCH v3 2/2] usb: dwc3: Add support for usb3-phy PHY configuration   Jan Kiszka
• [PATCH v3 2/2] usb: dwc3: Add support for usb3-phy PHY configuration   Jan Kiszka
• [PATCH] usb: dwc3: Fix non-usb3 configurations   Jan Kiszka
• [PATCH] efi_loader: Select EVENT as well   Jan Kiszka
• [PATCH] efi_loader: Select EVENT as well   Jan Kiszka
• [PATCH] efi_loader: Improve console screen clearing and reset   Jan Kiszka
• Radxa rock-pi-3a   Richard Kojedzinszky
• Radxa rock-pi-3a   Richard Kojedzinszky
• Radxa rock-pi-3a   Richard Kojedzinszky
• [PATCH v4 00/11] enable menu-driven boot device selection   Masahisa Kojima
• [PATCH v4 06/11] efi_loader: bootmgr: add booting from removable media   Masahisa Kojima
• [PATCH v4 07/11] bootmenu: add UEFI and disto_boot entries   Masahisa Kojima
• [PATCH v4 02/11] lib/charset: add u16_strlcat() function   Masahisa Kojima
• [PATCH v4 03/11] test: unit test for u16_strlcat()   Masahisa Kojima
• [PATCH v4 09/11] efi_loader: add menu-driven UEFI Boot Variable maintenance   Masahisa Kojima
• [PATCH v4 02/11] lib/charset: add u16_strlcat() function   Masahisa Kojima
• [PATCH v4 00/11] enable menu-driven boot device selection   Masahisa Kojima
• [PATCH v4 02/11] lib/charset: add u16_strlcat() function   Masahisa Kojima
• [PATCH v5 00/17] enable menu-driven boot device selection   Masahisa Kojima
• [PATCH v5 01/17] lib/charset: add u16_strlcat() function   Masahisa Kojima
• [PATCH v5 02/17] test: unit test for u16_strlcat()   Masahisa Kojima
• [PATCH v5 03/17] menu: always show the menu regardless of the number of entry   Masahisa Kojima
• [PATCH v5 04/17] menu: menu_get_choice() return -ENOENT if menu item is empty   Masahisa Kojima
• [PATCH v5 05/17] efi_loader: export efi_locate_device_handle()   Masahisa Kojima
• [PATCH v5 06/17] efi_loader: bootmgr: add booting from removable media   Masahisa Kojima
• [PATCH v5 07/17] bootmenu: flush input buffer before waiting user key input   Masahisa Kojima
• [PATCH v5 08/17] bootmenu: update bootmenu_entry structure   Masahisa Kojima
• [PATCH v5 09/17] bootmenu: add UEFI boot entry into bootmenu   Masahisa Kojima
• [PATCH v5 10/17] bootmenu: add distro boot entry   Masahisa Kojima
• [PATCH v5 11/17] bootmenu: add Kconfig option not to enter U-Boot console   Masahisa Kojima
• [PATCH v5 12/17] bootmenu: factor out the user input handling   Masahisa Kojima
• [PATCH v5 13/17] efi_loader: menu-driven addition of UEFI boot option   Masahisa Kojima
• [PATCH v5 14/17] efi_loader: menu-driven deletion of UEFI boot variable   Masahisa Kojima
• [PATCH v5 15/17] efi_loader: menu-driven update of UEFI bootorder variable   Masahisa Kojima
• [PATCH v5 16/17] bootmenu: add removable media entries   Masahisa Kojima
• [PATCH v5 17/17] doc:bootmenu: add UEFI boot and distro boot support description   Masahisa Kojima
• [PATCH 0/8] Add ASPEED SPI controller driver   Chin-Ting Kuo
• [PATCH 1/8] clk: aspeed: Get HCLK frequency support   Chin-Ting Kuo
• [PATCH 2/8] pinctrl: aspeed: FWSPICS1 and SPI1CS1 pin support   Chin-Ting Kuo
• [PATCH 3/8] spi: aspeed: Add ASPEED SPI controller driver   Chin-Ting Kuo
• [PATCH 4/8] MAINTAINERS: Add ASPEED SPI driver file   Chin-Ting Kuo
• [PATCH 5/8] arm: dts: aspeed: Update SPI flash node settings   Chin-Ting Kuo
• [PATCH 6/8] spi-mem: Add dirmap API from Linux   Chin-Ting Kuo
• [PATCH 7/8] mtd: spi-nor: use spi-mem dirmap API   Chin-Ting Kuo
• [PATCH 8/8] spi: aspeed: SPI dirmap read support   Chin-Ting Kuo
• [PATCH 7/8] mtd: spi-nor: use spi-mem dirmap API   Chin-Ting Kuo
• [RFC PATCH v3 00/23] Modernize U-Boot shell   Francis Laniel
• [RFC PATCH v3 01/23] video: sandbox: Add dummy function for sandbox_sdl_remove_display().   Francis Laniel
• [RFC PATCH v3 02/23] test: Add framework to test hush behavior   Francis Laniel
• [RFC PATCH v3 03/23] test: hush: Test hush if/else   Francis Laniel
• [RFC PATCH v3 04/23] test/py: hush_if_test: Remove the test file   Francis Laniel
• [RFC PATCH v3 05/23] test: hush: Test hush variable expansion   Francis Laniel
• [RFC PATCH v3 06/23] test: hush: Test hush commands list   Francis Laniel
• [RFC PATCH v3 07/23] test: hush: Test hush loops   Francis Laniel
• [RFC PATCH v3 08/23] cli: Add Busybox upstream hush.c file   Francis Laniel
• [RFC PATCH v3 09/23] cli: Port Busybox 2021 hush to U-Boot   Francis Laniel
• [RFC PATCH v3 10/23] cli: Add menu for hush parser   Francis Laniel
• [RFC PATCH v3 11/23] global_data.h: add GD_FLG_HUSH_OLD_PARSER flag.   Francis Laniel
• [RFC PATCH v3 12/23] cmd: Add new parser command.   Francis Laniel
• [RFC PATCH v3 13/23] cli: Enables using hush 2021 parser as command line parser   Francis Laniel
• [RFC PATCH v3 14/23] cli: hush_2021: Enable variables expansion for hush 2021   Francis Laniel
• [RFC PATCH v3 15/23] cli: hush_2021: Add functions to be called from run_command()   Francis Laniel
• [RFC PATCH v3 16/23] cli: add hush 2021 as parser for run_command*().   Francis Laniel
• [RFC PATCH v3 17/23] test: hush: Fix instructions list tests for hush 2021   Francis Laniel
• [RFC PATCH v3 18/23] test: hush: Fix variable expansion tests for hush 2021   Francis Laniel
• [RFC PATCH v3 19/23] cli: hush_2021: Enable using \< and \> as string compare operators   Francis Laniel
• [RFC PATCH v3 20/23] cli: hush_2021: Enable if keyword   Francis Laniel
• [RFC PATCH v3 21/23] test: hush: Fix if tests for hush 2021   Francis Laniel
• [RFC PATCH v3 22/23] cli: hush_2021: Enable loops   Francis Laniel
• [RFC PATCH v3 23/23] test: hush: Fix loop tests for hush 2021   Francis Laniel
• Cannot add the EFI Loader to a 64-bit EFI stubbed U-Boot   Nicklas Larsson
• Cannot add the EFI Loader to a 64-bit EFI stubbed U-Boot   Nicklas Larsson
• Cannot add the EFI Loader to a 64-bit EFI stubbed U-Boot   Nicklas Larsson
• [EXT] [PATCH] clk: imx8mp: Fill in DWC3 USB, USB PHY, HSIOMIX clock   Ye Li
• [PULL] u-boot-riscv/master   Leo Liang
• [PATCH] riscv: Fix build against binutils 2.38   Leo Liang
• [PATCH] riscv: Fix build against binutils 2.38   Leo Liang
• [PATCH v8] wdt: nuvoton: Add support for Nuvoton   Jim Liu
• [PATCH v1 0/6] Add Nuvoton NPCM750 support   Jim Liu
• [PATCH v1 1/6] ARM: configs: Add defconfig for Nuvoton NPCM750   Jim Liu
• [PATCH v1 2/6] ARM: dts: Add Nuvoton NPCM750 device tree   Jim Liu
• [PATCH v1 3/6] timer: npcm: Add NPCM timer support   Jim Liu
• [PATCH v1 4/6] serial: npcm: Add support for Nuvoton NPCM SoCs   Jim Liu
• [PATCH v1 5/6] clk: nuvoton: Add support for NPCM750   Jim Liu
• [PATCH v1 6/6] arm: nuvoton: Add support for Nuvoton NPCM750 BMC   Jim Liu
• [PATCH v1 5/6] clk: nuvoton: Add support for NPCM750   Jim Liu
• [PATCH v1 0/6] Add Nuvoton NPCM750 support   Jim Liu
• [PATCH v2 0/4] Add Nuvoton NPCM750 support   Jim Liu
• [PATCH v2 1/4] arm: nuvoton: Add support for Nuvoton NPCM750 BMC   Jim Liu
• [PATCH v2 2/4] clk: nuvoton: Add support for NPCM750   Jim Liu
• [PATCH v2 3/4] serial: npcm: Add support for Nuvoton NPCM SoCs   Jim Liu
• [PATCH v2 4/4] timer: npcm: Add NPCM timer support   Jim Liu
• [PATCH v3 0/4] Add Nuvoton NPCM750 support   Jim Liu
• [PATCH v3 1/4] arm: nuvoton: Add support for Nuvoton NPCM750 BMC   Jim Liu
• [PATCH v3 2/4] clk: nuvoton: Add support for NPCM750   Jim Liu
• [PATCH v3 3/4] serial: npcm: Add support for Nuvoton NPCM SoCs   Jim Liu
• [PATCH v3 4/4] timer: npcm: Add NPCM timer support   Jim Liu
• [PATCH v1] spi: npcm-fiu: add NPCM7xx FIU controller driver   Jim Liu
• [PATCH] imx8m: fix reading of DDR4 MR registers   Paul Liu
• [PATCH 0/1] imx8mm-cl-iot-gate: Remove redundant board_fix_fdt()   Ying-Chun Liu
• [PATCH 1/1] imx8mm-cl-iot-gate: Remove redundant board_fix_fdt()   Ying-Chun Liu
• [PATCH v2 0/1] imx8mm-cl-iot-gate: Remove redundant board_fix_fdt()   Ying-Chun Liu
• [PATCH v2 1/1] imx8mm-cl-iot-gate: Remove redundant board_fix_fdt()   Ying-Chun Liu
• [PATCH v14 0/2] add TCP and HTTP for downloading images   Ying-Chun Liu
• [PATCH v14 1/2] net: Add TCP protocol   Ying-Chun Liu
• [PATCH v14 2/2] net: Add wget application   Ying-Chun Liu
• [PATCH 0/2] allow to write protect single boot partition   Ying-Chun Liu
• [PATCH 1/2] drivers: mmc: write protect single boot area   Ying-Chun Liu
• [PATCH 2/2] cmd: mmc: allow to write protect single boot partition   Ying-Chun Liu
• [RFC] Data structure for information handoff between firmware boot stages   Jose Marinho
• [PATCH v2 08/18] pci: Fix use of flags in dm_pci_map_bar()   Bin Meng
• [PATCH v2 09/18] pci: Add config for Enhanced Allocation   Bin Meng
• [PATCH v2 06/18] virtio: pci: Check virtio capability is in bounds   Bin Meng
• [PATCH v2 07/18] virtio: pci: Read entire capability into memory   Bin Meng
• [PATCH v2 11/18] pci: Range check address conversions   Bin Meng
• [PATCH v2 12/18] test: pci: Test PCI address conversion functions   Bin Meng
• [PATCH v2 13/18] pci: Map bars with offset and length   Bin Meng
• [PATCH v2 14/18] pci: Match region flags using a mask   Bin Meng
• [PATCH v2 15/18] pci: Update dm_pci_bus_to_virt() parameters   Bin Meng
• [PATCH v2 16/18] pci: Add mask parameter to dm_pci_map_bar()   Bin Meng
• [PATCH v2 17/18] virtio: pci: Check virtio configs are mapped   Bin Meng
• [PATCH v2 18/18] virtio: pci: Make use of dm_pci_map_bar()   Bin Meng
• [PATCH v2 00/18] virtio: pci: Add and fix consistency checks   Bin Meng
• [PATCH v2 09/18] pci: Add config for Enhanced Allocation   Bin Meng
• [PATCH v3 08/18] pci: Fix use of flags in dm_pci_map_bar()   Bin Meng
• [PATCH v3 11/18] test: pci: Test PCI address conversion functions   Bin Meng
• [PATCH v3 12/18] pci: Map bars with offset and length   Bin Meng
• [PATCH v3 14/18] pci: Update dm_pci_bus_to_virt() parameters   Bin Meng
• [PATCH v3 15/18] pci: Add mask parameter to dm_pci_map_bar()   Bin Meng
• [PATCH v2 09/18] pci: Add config for Enhanced Allocation   Bin Meng
• [PATCH v2 01/12] virtio_ring: Merge identical variables   Bin Meng
• [PATCH v2 02/12] virtio_ring: Add helper to attach vring descriptor   Bin Meng
• [PATCH 1/1] doc: fix typos in bootmenu.rst   Bin Meng
• [PATCH v5 0/9] imx8mm: add pwm-imx backlight support   Tommaso Merciai
• [PATCH] common: fdt: introduce fdt_fixup_reserved_memory   Tommaso Merciai
• imx8mm eLCDIF clock   Tommaso Merciai
• im8mn: Loading U-Boot via serial download mode   Tommaso Merciai
• imx8mm eLCDIF clock   Tommaso Merciai
• imx8mm eLCDIF clock   Tommaso Merciai
• imx8mm eLCDIF clock   Tommaso Merciai
• imx8mm eLCDIF clock   Tommaso Merciai
• [PATCH 1/3] binman: add sign option for binman   Ivan Mikhaylov
• [PATCH 3/3] binman: add test for sign option   Ivan Mikhaylov
• [PATCH 1/2] mtd: call of_platform_populate() for MTD partitions   Rafał Miłecki
• [PATCH 2/2] nvmem: add driver handling U-Boot environment variables   Rafał Miłecki
• [PATCH] dt-bindings: nvmem: u-boot, env: add Broadcom's variant binding   Rafał Miłecki
• [PATCH] dt-bindings: mtd: partitions: add UBI binding   Rafał Miłecki
• [PATCH] imx: drop CONFIG_MXC_UART_BASE   Soeren Moch
• [PATCH 0/5] sysreset: Add Atmel/Microchip sysreset driver   Sergiu Moga
• [PATCH 1/5] ARM: dts: at91: Add RSTC node   Sergiu Moga
• [PATCH 2/5] sysreset: Add Atmel/Microchip sysreset driver   Sergiu Moga
• [PATCH 3/5] configs: at91: Enable SYSRESET for Atmel/Microchip's platforms   Sergiu Moga
• [PATCH 4/5] ARM: mach-at91: arm926ejs: Add SYSRESET conditional   Sergiu Moga
• [PATCH 5/5] ARM: mach-at91: armv7: Remove default reset driver   Sergiu Moga
• [PATCH 4/7] sunxi: use boot source for determining environment location   Chris Morgan
• USB init before using usb_serial_acm gadget?   Sergey Nazaryev
• USB init before using usb_serial_acm gadget?   Sergey Nazaryev
• [PATCH] rockchip: rk3399: Add Nanopi M4V2 board support   Christopher Obbard
• [PATCH] bosch: Add inital board support for ACC   Philip Oberfichtner
• [PATCH v2] bosch: Add initial board support for ACC   Philip Oberfichtner
• [PATCH v3] bosch: Add initial board support for ACC   Philip Oberfichtner
• [PATCH v4] bosch: Add initial board support for ACC   Philip Oberfichtner
• [PATCH v5] bosch: Add initial board support for ACC   Philip Oberfichtner
• [PATCH 4/6] net: fec: add support for DM_MDIO   Vladimir Oltean
• [PATCH 5/6] net: add MV88E61xx DSA driver   Vladimir Oltean
• [PATCH u-boot-net v3 01/14] net: mdio-uclass: fix type for phy_mode_str and phy_handle_str   Vladimir Oltean
• [PATCH u-boot-net v3 02/14] net: mdio-uclass: use ARRAY_SIZE()   Vladimir Oltean
• [PATCH u-boot-net v3 04/14] net: mdio-uclass: add wrappers for read/write/reset operations   Vladimir Oltean
• [PATCH u-boot-net v3 05/14] treewide: use dm_mdio_read/write/reset() wrappers   Vladimir Oltean
• [PATCH u-boot-net v3 06/14] net: phy: fix parsing wrong property   Vladimir Oltean
• [PATCH u-boot-net v3 08/14] treewide: Rename PHY_INTERFACE_MODE_COUNT to PHY_INTERFACE_MODE_MAX   Vladimir Oltean
• [PATCH u-boot-net v3 09/14] treewide: Rename PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA   Vladimir Oltean
• [PATCH u-boot-net v3 14/14] net: phy: don't require PHY interface mode during PHY creation   Vladimir Oltean
• [PATCH 5/6] net: add MV88E61xx DSA driver   Vladimir Oltean
• [PATCH 2/2] net: phy: atheros: avoid error in ar803x_of_init() when PHY has no OF node   Vladimir Oltean
• [PATCH 5/6] net: add MV88E61xx DSA driver   Vladimir Oltean
• [PATCH 01/10] microblaze: start.S: remove unused code   Ovidiu Panait
• [PATCH 02/10] microblaze: cache: replace XILINX_USE_DCACHE -> CONFIG_DCACHE   Ovidiu Panait
• [PATCH 03/10] microblaze: cache: improve dcache Kconfig options   Ovidiu Panait
• [PATCH 04/10] microblaze: cache: improve icache Kconfig options   Ovidiu Panait
• [PATCH 05/10] microblaze: cache: split flush_cache() function   Ovidiu Panait
• [PATCH 06/10] microblaze: cache: migrate XILINX_DCACHE_BYTE_SIZE to Kconfig   Ovidiu Panait
• [PATCH 07/10] microblaze: cache: introduce flush_cache_all()   Ovidiu Panait
• [PATCH 08/10] microblaze: cache: introduce flush_dcache_range()   Ovidiu Panait
• [PATCH 09/10] cpu: microblaze: add driver for CPU   Ovidiu Panait
• [PATCH 10/10] microblaze: cache: use fdt cache size info if available   Ovidiu Panait
• [PATCH] dt-bindings: nvmem: u-boot, env: add Broadcom's variant binding   Joel Peshkin
• [PATCH] dt-bindings: nvmem: u-boot, env: add Broadcom's variant binding   Joel Peshkin
• [PATCH] mtd: spi-nor-ids: Add support for W25Q512JV   Dhananjay Phadke
• TFTP hangs with fragmented IP packets   Laurent Pinchart
• [PATCH] rpi: always set fdt_addr to the correct value   Jim Posen
• USB init before using usb_serial_acm gadget?   Loic Poulain
• USB init before using usb_serial_acm gadget?   Loic Poulain
• [PATCH v2 05/23] pinctrl: sunxi: Add UART pinmuxes   Andre Przywara
• [PATCH v2 06/23] sunxi: Skip non-DM UART pin setup when PINCTRL=y   Andre Przywara
• [PATCH v2 07/23] pinctrl: sunxi: Add sun4i EMAC pinmuxes   Andre Przywara
• [PATCH v2 08/23] net: sunxi_emac: Remove non-DM pin setup   Andre Przywara
• [PATCH v2 09/23] pinctrl: sunxi: Add sunxi GMAC pinmuxes   Andre Przywara
• [PATCH v2 10/23] sunxi: Remove non-DM GMAC pin setup   Andre Przywara
• [PATCH v2 11/23] pinctrl: sunxi: Add sun8i EMAC pinmuxes   Andre Przywara
• [PATCH v2 12/23] net: sun8i_emac: Remove non-DM pin setup   Andre Przywara
• [PATCH v2 15/23] sunxi: Remove non-DM I2C clock/pin setup from U-Boot   Andre Przywara
• [PATCH v2 16/23] i2c: sun6i_p2wi: Only do non-DM pin setup for non-DM I2C   Andre Przywara
• [PATCH v2 17/23] i2c: sun8i_rsb: Only do non-DM pin setup for non-DM I2C   Andre Przywara
• [PATCH v2 18/23] pinctrl: sunxi: Add MMC pinmuxes   Andre Przywara
• [PATCH v2 19/23] sunxi: Remove non-DM MMC pin setup   Andre Przywara
• [PATCH v2 20/23] pinctrl: sunxi: Add the A64 PWM pinmux   Andre Przywara
• [PATCH v2 21/23] pwm: sunxi: Remove non-DM pin setup   Andre Przywara
• [PATCH v2 22/23] pinctrl: sunxi: Add SPI0 pinmuxes   Andre Przywara
• [PATCH v2 23/23] spi: sun4i_spi: Remove non-DM pin setup   Andre Przywara
• [PATCH v2 02/23] sunxi: pinctrl: Implement pin muxing functions   Andre Przywara
• [PATCH v2 03/23] sunxi: pinctrl: Implement get_pin_muxing function   Andre Przywara
• [PATCH v2] Add ethernet0 alias in Nanopi NEO's device tree   Andre Przywara
• [PATCH v2 00/23] sunxi: Add and use a pinctrl driver   Andre Przywara
• [PATCH 2/4] i2c: sun6i_p2wi: Add support for DM clocks and resets   Andre Przywara
• [PATCH 1/4] i2c: sun6i_p2wi: Initialize chips in .child_pre_probe   Andre Przywara
• [PATCH v5 2/3] sunxi: Support SPL in both eGON and TOC0 images   Andre Przywara
• [PATCH 4/4] i2c: sun8i_rsb: Add support for DM clocks and resets   Andre Przywara
• [PATCH 3/4] i2c: sun8i_rsb: Initialize chips in .child_pre_probe   Andre Przywara
• Pull request: u-boot-sunxi/master for v2022.07   Andre Przywara
• [PATCH 2/2] sunxi: fix non working console on uart2   Andre Przywara
• [PATCH v2 0/4] mkimage: sunxi_egon: add riscv support   Andre Przywara
• [PATCH 0/3] sunxi: H6/H616: PRCM updates   Andre Przywara
• [PATCH v5 0/3] sunxi: TOC0 image type support   Andre Przywara
• [PATCH 0/4] sunxi: Fixes for DM I2C drivers   Andre Przywara
• [RESEND PATCH v2 0/3] sunxi: Improve automatic eMMC boot partition support   Andre Przywara
• [PATCH 4/7] sunxi: use boot source for determining environment location   Andre Przywara
• [PATCH] sunxi: fix initial environment loading without MMC   Andre Przywara
• [PATCH v1] sunxi: Make SYS_VENDOR, SYS_BOARD, SYS_CONFIG_NAME configurable   Andre Przywara
• [PATCH 1/2] sunxi: Skip MMC0 init when its pinmux conflicts with UART0   Andre Przywara
• [PATCH] sunxi: fix initial environment loading without MMC   Andre Przywara
• [PATCH v1] sunxi: Make SYS_VENDOR, SYS_BOARD, SYS_CONFIG_NAME configurable   Andre Przywara
• [PATCH 00/12] sunxi: Devicetree sync from Linux v5.18-rc1   Andre Przywara
• [PATCH 00/12] sunxi: Devicetree sync from Linux v5.18-rc1   Andre Przywara
• [PATCH 00/12] sunxi: Devicetree sync from Linux v5.18-rc1   Andre Przywara
• [PATCH 00/12] sunxi: Devicetree sync from Linux v5.18-rc1   Andre Przywara
• [PATCH] ARM: dts: k3-j721s2: Correct timer frequency   Vignesh Raghavendra
• [PATCH 00/11] TI: Add support for AM62 SoC   Vignesh Raghavendra
• [PATCH 01/11] drivers: mmc: am654_sdhci: Add new compatible for AM62 SoC   Vignesh Raghavendra
• [PATCH 02/11] dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM62   Vignesh Raghavendra
• [PATCH 03/11] soc: ti: k3-socinfo: Add entry for AM62X SoC family   Vignesh Raghavendra
• [PATCH 04/11] arm: mach-k3: Introduce the basic files to support AM62   Vignesh Raghavendra
• [PATCH 05/11] arm: mach-k3: am62: Introduce autogenerated SoC data   Vignesh Raghavendra
• [PATCH 06/11] dma: ti: Add PSIL data for AM62x DMASS   Vignesh Raghavendra
• [PATCH 07/11] arm: dts: Introduce base AM62 SoC dtsi files   Vignesh Raghavendra
• [PATCH 08/11] board: ti: Introduce the basic files to support AM62 SK board   Vignesh Raghavendra
• [PATCH 09/11] arm: dts: Add support for AM62-SK   Vignesh Raghavendra
• [PATCH 10/11] configs: Add configs for AM62x SK   Vignesh Raghavendra
• [PATCH 11/11] doc: ti: Add readme for AM62x SK   Vignesh Raghavendra
• [PATCH 02/11] dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM62   Vignesh Raghavendra
• [PATCH 04/11] arm: mach-k3: Introduce the basic files to support AM62   Vignesh Raghavendra
• [PATCH 07/11] arm: dts: Introduce base AM62 SoC dtsi files   Vignesh Raghavendra
• [PATCH 04/11] arm: mach-k3: Introduce the basic files to support AM62   Vignesh Raghavendra
• [PATCH 11/11] doc: ti: Add readme for AM62x SK   Vignesh Raghavendra
• [PATCH] soc: xilinx: versal: fix out of bounds array access   Jorge Ramirez-Ortiz
• [PATCH v2] soc: xilinx: versal: fix out of bounds array access   Jorge Ramirez-Ortiz
• [PATCH v2] ram: k3-ddrss: Fix register name and explain its usage   Dominic Rath
• EXT: [PATCH] pci: imx: use vpcie-supply if defined by device-tree   Ian Ray
• [PATCH] configs: ge_bx50v3: remove CONFIG_PCIE_IMX_POWER_GPIO   Ian Ray
• [PATCH] squashfs: Fix compilation on big endian systems   Miquel Raynal
• [PATCH] squashfs: Fix compilation on big endian systems   Miquel Raynal
• [PATCH 2/2] nvmem: add driver handling U-Boot environment variables   Miquel Raynal
• [PATCH 1/2] mtd: call of_platform_populate() for MTD partitions   Miquel Raynal
• [PATCH 2/2] nvmem: add driver handling U-Boot environment variables   Miquel Raynal
• [PATCH 1/1] fs/squashfs: simplify sqfs_read()   Miquel Raynal
• Regression? [PATCH 1/2] mtd: call of_platform_populate() for MTD partitions   Miquel Raynal
• [PATCH 10/13] configs: phycore_imx8mm/p: drop unused SDHC macro   Teresa Remmet
• [PATCH 0/4] mmc: add support for bcm63158   Philippe Reynes
• [PATCH 1/4] drivers: mmc: bcm63158_sdhci: initial support   Philippe Reynes
• [PATCH 2/4] arch: arm: dts: bcm63158.dtsi: add mmc support   Philippe Reynes
• [PATCH 3/4] arch: arm: dts: bcm963158.dts: enable sdhci support   Philippe Reynes
• [PATCH 4/4] configs: bcm963158_ram_defconfig: enable mmc and gpt support   Philippe Reynes
• [PATCH 0/3] gpt: add support to repair gpt   Philippe Reynes
• [PATCH 1/3] disk: part_efi: add support to repair gpt table   Philippe Reynes
• [PATCH 2/3] cmd: gpt: add subcommand repair   Philippe Reynes
• [PATCH 3/3] test: py: tests: test_gpt.py: add a simple test for the command gpt repair   Philippe Reynes
• ipq40xx SPI and/or SPI flash driver not working.   Florence Riker
• [PATCH v8 01/15] arch: Kconfig: imply BINMAN for SANDBOX   Tom Rini
• [PATCH v8 02/15] lib: Kconfig: enhance help for ASN1   Tom Rini
• [PATCH v8 03/15] lib: Kconfig: enhance the help of OID_REGISTRY   Tom Rini
• [PATCH v8 04/15] lib: allow to build asn1 decoder and oid registry in SPL   Tom Rini
• [PATCH v8 05/15] lib: crypto: allow to build crypyo in SPL   Tom Rini
• [PATCH v8 06/15] lib: rsa: allow rsa verify with pkey in SPL   Tom Rini
• [PATCH v8 07/15] boot: image: add a stage pre-load   Tom Rini
• [PATCH v8 08/15] cmd: bootm: add a stage pre-load   Tom Rini
• [PATCH v8 09/15] common: spl: fit_ram: allow to use image pre load   Tom Rini
• [PATCH v8 10/15] mkimage: add public key for image pre-load stage   Tom Rini
• [PATCH v8 11/15] Makefile: provide sah-key to binman   Tom Rini
• [PATCH v8 12/15] tools: binman: add support for pre-load header   Tom Rini
• [PATCH v8 13/15] configs: sandbox_defconfig: enable stage pre-load in bootm   Tom Rini
• [PATCH v8 14/15] test: py: vboot: add test for global image signature   Tom Rini
• [PATCH v8 15/15] cmd: bootm: add subcommand preload   Tom Rini
• [PATCH] env: Avoid using a leftover text-environment file   Tom Rini
• [PATCH] ARM: dts: colibri-imx6ull: fix mac address passing   Tom Rini
• Pull request for efi-2022-04-rc6   Tom Rini
• [PATCH] ARM: dts: colibri-imx6ull: fix mac address passing   Tom Rini
• [PATCH] ARM: dts: colibri-imx6ull: fix mac address passing   Tom Rini
• [PATCH] ARM: dts: colibri-imx6ull: fix mac address passing   Tom Rini
• [PATCH 1/7] am33xx: musb: Remove unused configuration logic   Tom Rini
• [PATCH 01/22] Convert CONFIG_CF_DSPI to Kconfig   Tom Rini
• [PATCH 01/11] db-mv784mp-gp: Rename CONFIG_DB_784MP_GP to CONFIG_TARGET_DB_MV784MP_GP   Tom Rini
• [PATCH v3 27/29] serial: sandbox: Implement puts   Tom Rini
• [PATCH 02/11] vexpress64: Kconfig: move board definitions out of arch/arm   Tom Rini
• [PATCH 03/11] arm: dts: Add Arm FVP Fastmodel RevC .dts files from Linux   Tom Rini
• [PATCH 04/11] vexpress64: fvp: enable OF_CONTROL   Tom Rini
• [PATCH 05/11] vexpress64: config header: unify environment definition   Tom Rini
• [PATCH 06/11] vexpress64: move hardware setting from defconfig to Kconfig   Tom Rini
• [PATCH 08/11] vexpress64: defconfigs: allow default commands   Tom Rini
• [PATCH 09/11] vexpress64: generalise page table generation   Tom Rini
• [PATCH 10/11] vexpress64: pick DRAM size from DT   Tom Rini
• [PATCH 11/11] vexpress64: Add ARMv8R-64 board variant   Tom Rini
• [PATCH v3 01/29] doc: Convert semihosting readme to rST   Tom Rini
• [PATCH v3 02/29] nxp: ls1046ardb: Convert README to rST   Tom Rini
• [PATCH v3 03/29] doc: ls1046ardb: Expand boot mode section   Tom Rini
• [PATCH v3 04/29] doc: ls1046ardb: Document debug uart   Tom Rini
• [PATCH v3 05/29] arm: smh: Add semihosting entry to MAINTAINERS   Tom Rini
• [PATCH v3 06/29] arm: smh: Export semihosting functions   Tom Rini
• [PATCH v3 07/29] arm: smh: Use numeric modes for smh_open   Tom Rini
• [PATCH v3 08/29] arm: smh: Return errno on error   Tom Rini
• [PATCH v3 09/29] arm: smh: Document functions in header   Tom Rini
• [PATCH v3 10/29] arm: smh: Add some file manipulation commands   Tom Rini
• [PATCH v3 11/29] spl: Add semihosting boot method   Tom Rini
• [PATCH v3 12/29] fs: Add semihosting filesystem   Tom Rini
• [PATCH v3 13/29] cmd: fdt: Use start/size for chosen instead of start/end   Tom Rini
• [PATCH v3 14/29] arm: smh: Remove smhload command   Tom Rini
• [PATCH v3 15/29] arm: smh: Add some functions for working with the host console   Tom Rini
• [PATCH v3 16/29] serial: Add semihosting driver   Tom Rini
• [PATCH v3 17/29] doc: smh: Update semihosting documentation   Tom Rini
• [PATCH v3 20/29] arm64: Save spsr in pt_regs   Tom Rini
• [PATCH v3 22/29] arm: smh: Add option to detect semihosting   Tom Rini
• [PATCH v3 23/29] arm64: Catch non-emulated semihosting calls   Tom Rini
• [PATCH v3 24/29] serial: smh: Initialize serial only if semihosting is enabled   Tom Rini
• [PATCH v3 25/29] arm64: ls1046a: Support semihosting fallback   Tom Rini
• [PATCH v3 26/29] serial: dm: Add support for puts   Tom Rini
• [RESEND PATCH v3 18/29] ls1046ardb: Add support for JTAG boot   Tom Rini
• [RESEND PATCH v3 19/29] arm64: Save esr in pt_regs   Tom Rini
• [RESEND PATCH v3 21/29] arm64: Import some ESR and SPSR defines from Linux   Tom Rini
• [PULL next] u-boot-at91-2022.07-a   Tom Rini
• [PATCH] env: do not fail on non-existing env.in file   Tom Rini
• [ANN] U-Boot v2022.04 released   Tom Rini
• [PATCH] Remove duplication of table_compute_checksum function   Tom Rini
• [PATCH 1/2] ram: k3-ddrss: Fix register name and explain its usage   Tom Rini
• [PATCH 1/1] riscv: alloc space exhausted   Tom Rini
• Pull request: u-boot-sunxi/master for v2022.07   Tom Rini
• [GIT PULL] xilinx patches for v2022.07-rc1 v2   Tom Rini
• [PATCH v2 1/1] riscv: alloc space exhausted   Tom Rini
• [PATCH 1/3 v3] arm: init: save previous bootloader data   Tom Rini
• [PATCH 2/3 v4] board: starqltechn: get board usable - add bootcmd and docs   Tom Rini
• [PATCH 3/3 v2] board: axy17lte: get board usable - add bootcmd and docs   Tom Rini
• [PATCH] qemu-arm: Enable NVMe for distro boot   Tom Rini
• [PATCH v3 1/4] misc: k3_esm: Add functionality to set and route error events within K3SoC   Tom Rini
• [PATCH v3 2/4] arm: dts: k3-am64: Add support for ESM device nodes   Tom Rini
• [PATCH v3 3/4] arch: arm: mach-k3: am642_init: Probe ESM nodes   Tom Rini
• [PATCH v3 4/4] configs: am64x_evm_r5_defconfig: Add support for ESM   Tom Rini
• [PATCH v2 1/2] configs: am64x_evm_a53_defconfig: Switch to per-cpu timer as tick provider   Tom Rini
• [PATCH v2 2/2] ARM: dts: k3-am642: Correct timer frequency   Tom Rini
• [PATCH 1/8] arm: dts: k3-am642-r5-evm: Mark memory with u-boot, dm-spl   Tom Rini
• [PATCH 2/8] board: ti: am64x: Use fdt functions for ram and bank init   Tom Rini
• [PATCH 3/8] dt-bindings: memory-controller: Add information about ECC bindings   Tom Rini
• [PATCH 4/8] ram: k3-ddrss: Rename ddrss_ss_regs to ddrss_ctl_regs   Tom Rini
• [PATCH 5/8] ram: k3-ddrss: Introduce ECC Functionality for full memory space   Tom Rini
• [PATCH 6/8] board: ti: am64x: Account for DDR size fixups if ECC is enabled   Tom Rini
• [PATCH 7/8] arm: dts: k3-am64-ddr: Add ss_cfg reg entry   Tom Rini
• [PATCH 8/8] configs: am64x_evm_r5: Add CONFIG_NR_DRAM_BANKS as done in a53 defconfig   Tom Rini
• [PATCH 1/2] ram: k3-am654: Write all configuration values   Tom Rini
• [PATCH 2/2] ram: k3-am654: Make VTT regulator optional   Tom Rini
• [PATCH v4 0/6] imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Tom Rini
• [PATCH] driver: gpio: fix gpio glitch for output-high gpio-hog   Tom Rini
• [PATCH] armv8: sec_firmware: drop unneeded ARMV8_SEC_FIRMWARE_SUPPORT check   Tom Rini
• [PATCH] nds32: Remove the architecture   Tom Rini
• [RFC PATCH] RFC: Replace CONFIG_SYS_BAUDRATE_TABLE by board and UART driver rounding functions   Tom Rini
• [PATCH v1 2/6] ARM: dts: Add Nuvoton NPCM750 device tree   Tom Rini
• [PATCH v1 1/6] ARM: configs: Add defconfig for Nuvoton NPCM750   Tom Rini
• [PATCH v1 6/6] arm: nuvoton: Add support for Nuvoton NPCM750 BMC   Tom Rini
• [PATCH] Convert CONFIG_SYS_MEM_TOP_HIDE to Kconfig   Tom Rini
• [PATCH] driver: gpio: fix gpio glitch for output-high gpio-hog   Tom Rini
• [PATCH v2 1/3] power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217   Tom Rini
• [PATCH v2 2/3] power: pmic: Provide DM_PMIC support for tps65217 driver   Tom Rini
• [PATCH v2] tools: mkimage: Call verify_header after writing image to disk   Tom Rini
• [PATCH 1/1] dm: fix function documentation in include/dm/ofnode.h   Tom Rini
• [PATCH] tools: mkimage: No need to verify_header for header_v2   Tom Rini
• [PATCH] Makefile: add endian link flag to u-boot-elf.o   Tom Rini
• [PULL] u-boot-riscv/master   Tom Rini
• [PATCH v1 0/6] Add Nuvoton NPCM750 support   Tom Rini
• [PATCH 0/6] introduce Arm FF-A support   Tom Rini
• [PATCH 0/6] introduce Arm FF-A support   Tom Rini
• [PATCH] misc: atsha204a: Fix big endian support   Tom Rini
• [PATCH 01/18] buildman: Update default config to build for sandbox   Tom Rini
• [PATCH v3] imx8/ls10xx: Use a sane SYS_MALLOC_F_LEN default   Tom Rini
• [PATCH 1/2] Kconfig: Change SYS_MALLOC_F_LEN default to 0x2000   Tom Rini
• [PATCH 2/2] am33xx: Update SYS_MALLOC_F_LEN to use 0x2000 as the default   Tom Rini
• [PATCH v2 1/2] env: setenv add resolve value option   Tom Rini
• [PATCH] Convert CONFIG_SKIP_LOWLEVEL_INIT et al to Kconfig   Tom Rini
• [PATCH] env: Allow text-env tests to run with awk   Tom Rini
• [PATCH 1/2] env: Move the doc comment to the code   Tom Rini
• [PATCH 2/2] env: Drop the unncessary protocol mention in autoload   Tom Rini
• [PATCH V3] Makefile: Sort u-boot-initial-env output   Tom Rini
• [PATCH] scripts/get_default_envs.sh: Remove blank lines   Tom Rini
• [PATCH] env: Load env when ENV_IS_NOWHERE is only location selected   Tom Rini
• [PATCH] cmd: env: Add `indirect` to indirectly set values   Tom Rini
• [PATCH v4 1/1] env: fat: Allow overriding interface, device and partition   Tom Rini
• [PATCH v2 1/2] env: setenv add resolve value option   Tom Rini
• [v2 13/25] spi: cadence_qspi: Migrate CONFIG_CQSPI_REF_CLK to Kconfig   Tom Rini
• [PATCH 01/25] Convert CONFIG_BOARD_SIZE_LIMIT to Kconfig   Tom Rini
• [PATCH 02/25] mvebu: Move BOOTROM_ERR_REG out of CONFIG namespace   Tom Rini
• [PATCH 03/25] tegra: Migrate CI_UDC_HAS_HOSTPC to Kconfig   Tom Rini
• [PATCH 04/25] Convert CONFIG_CMDLINE_PS_SUPPORT to Kconfig   Tom Rini
• [PATCH 05/25] arm: integrator: Migrate platform-specific options and cleanup armcoremodule.h   Tom Rini
• [PATCH 06/25] s5p_goni, smdkc100: Move some environment settings out of CONFIG   Tom Rini
• [PATCH 07/25] MPC837XERDB: Stop using CONFIG_RAMDISKFILE   Tom Rini
• [PATCH 08/25] corvus: Migrate CONFIG_*_LED out of CONFIG namespace   Tom Rini
• [PATCH 09/25] stm32f429-discovery: Migrate CONFIG_*_LED out of CONFIG namespace   Tom Rini
• [PATCH 10/25] at91: Remove unused LED code   Tom Rini
• [PATCH 11/25] Convert CONFIG_CONS_SCIF0 et al to Kconfig   Tom Rini
• [PATCH 12/25] Convert CONFIG_SH_SCIF_CLK_FREQ to Kconfig   Tom Rini
• [PATCH 14/25] controlcenterdc: Migrate CUSTOMER_BOARD_SUPPORT to Kconfig   Tom Rini
• [PATCH 15/25] tegra: Drop CONFIG_CHROMEOS_EXTRA_ENV_SETTINGS   Tom Rini
• [PATCH 16/25] microblaze: Migrate DCACHE/ICACHE to Kconfig   Tom Rini
• [PATCH 17/25] ls1021atwr: Use DEBUG and not CONFIG_DEBUG   Tom Rini
• [PATCH 18/25] nds32: Migrate CONFIG_DEBUG_LED to Kconfig   Tom Rini
• [PATCH 19/25] powerpc: mpc83xx: Migrate DEFAULT_IMMR to Kconfig   Tom Rini
• [PATCH 20/25] galileo: Remove CONFIG_DESIGNWARE_ETH reference   Tom Rini
• [PATCH 21/25] Convert CONFIG_DIMM_SLOTS_PER_CTLR to Kconfig   Tom Rini
• [PATCH 22/25] Convert CONFIG_FSL_QIXIS et al to Kconfig   Tom Rini
• [PATCH 23/25] m53menlo: Drop CONFIG_DISCOVER_PHY   Tom Rini
• [PATCH 24/25] siemens-am33x-common: Drop CONFIG_DMA_COHERENT*   Tom Rini
• [PATCH 25/25] arm: fsl-layerscape: Migrate more DP-DDR options to Kconfig   Tom Rini
• [PATCH 01/10] net: Remove armada100_fec driver   Tom Rini
• [PATCH 02/10] net: Remove ax88180 driver   Tom Rini
• [PATCH 03/10] net: Remove cs8900 driver   Tom Rini
• [PATCH 04/10] net: Remove dnet driver   Tom Rini
• [PATCH 05/10] net: Remove ftmac110 driver   Tom Rini
• [PATCH 06/10] net: Remove lan91c96 driver   Tom Rini
• [PATCH 07/10] net: Remove natsemi driver   Tom Rini
• [PATCH 08/10] net: Remove ns8382x driver   Tom Rini
• [PATCH 09/10] net: Remove uli526x driver   Tom Rini
• [PATCH 10/10] arm: Remove unused ep93xx code   Tom Rini
• [PATCH 13/25] spi: cadence_qspi: Migrate CONFIG_CQSPI_REF_CLK to Kconfig   Tom Rini
• [PATCH] ns16550: Respect CONFIG_BAUDRATE < 0 in _debug_uart_init   Tom Rini
• [PATCH] cmd: gpio: Add `gpio read` subcommand   Tom Rini
• [PATCH] ARM: dts: k3-j721s2: Correct timer frequency   Tom Rini
• [PATCH] test/py:Update python tests for ‘gpio’ cmd   Tom Rini
• [PATCH] gpio: Add gpio_request_by_line_name()   Tom Rini
• [PATCH v3] gpio: Enable hogging support in SPL   Tom Rini
• [PATCH] gpio: pca953x_gpio: add PCA957X support   Tom Rini
• [PATCH] Revert "env: Load env when ENV_IS_NOWHERE is only location selected"   Tom Rini
• [PATCH V2 2/6] arch: arm: move COUNTER_FREQUENCY from versal to arm   Tom Rini
• Pull request for efi-2022-07-rc1   Tom Rini
• [PATCH] Kconfig: Fix SYS_MALLOC_F_LEN for i.MX8MQ   Tom Rini
• [PATCH] ram: k3-ddrss: Allow use of dt provided initial frequency   Tom Rini
• [PATCH V2 0/6] Convert COUNTER_FREQUENCY to CONFIG_COUNTER_FREQUENCY   Tom Rini
• [PATCH V2 6/6] include/configs: drop COUNTER_FREQUENCY   Tom Rini
• [PATCH v3 1/3] Add valgrind headers to U-Boot   Tom Rini
• [PATCH v3 2/3] malloc: Annotate allocator for valgrind   Tom Rini
• [PATCH v3 3/3] doc: sandbox: Document how to run sandbox with valgrind   Tom Rini
• [PATCH v3 1/3] rng: add OP-TEE based Random Number Generator   Tom Rini
• [PATCH v3 2/3] tee: optee: bind rng optee driver   Tom Rini
• [PATCH v3 3/3] configs: add support of OPTEE RNG in stm32mp15 defconfig   Tom Rini
• [PATCH] build: allow a downstream suffix in the version shown during boot   Tom Rini
• [PATCH v4 0/6] imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Tom Rini
• [PATCH v4 0/6] imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   Tom Rini
• [PATCH] CI: Print out unmigrated symbols when failing   Tom Rini
• [v2 13/25] spi: cadence_qspi: Migrate CONFIG_CQSPI_REF_CLK to Kconfig   Tom Rini
• [PATCH] ARM: dts: k3-j721s2: Correct timer frequency   Tom Rini
• [PATCH 1/3] lib: rsa: Fix const-correctness of rsassa_pss functions   Tom Rini
• [PATCH 2/3] lib: rsa: Leverage existing data buffer instead of systematic copy   Tom Rini
• [PATCH 3/3] lib: rsa: Update function padding_pss_verify (any-salt)   Tom Rini
• [PATCH] led: led_pwm: Add a driver for LEDs connected to PWM   Tom Rini
• [PATCH] lib/crypto: support sha384/sha512 in x509/pkcs7   Tom Rini
• [PATCH v3] spl: allow boot from first bootable partition   Tom Rini
• [PATCH v2] drivers: led: bcm6858: Set a default brightness when probing LEDs   Tom Rini
• [PATCH v1 1/2] mtd: Add flash_node in struct mtd_info   Tom Rini
• [PATCH v1 2/2] mtd: Update the way partitions are parsed   Tom Rini
• [PATCH v2] cmd: pxe_utils: sysboot: replace cls command by video_clear in PXE parser   Tom Rini
• [PATCH] image: fit: Align hash output buffers   Tom Rini
• [PATCH] ahci: add PCI bindings for Marvell 88SE6121/45 SATA controllers   Tom Rini
• [PATCH 1/1] ubifs: Fix journal replay wrt. xattr nodes   Tom Rini
• [PATCH] linux/mtd/mtd.h: Add <dm/ofnode.h>   Tom Rini
• binman and faked blobs failures   Tom Rini
• [PATCH] linux/mtd/mtd.h: Add <dm/ofnode.h>   Tom Rini
• [PATCH 01/10] Makefile: v2 Allow LTO to be disabled for a build   Tom Rini
• [PATCH 3/3] armv8: Initialize MAIR in early boot   Tom Rini
• [PATCH v2] boot: don't enable the non-secure boot commands by default if secure boot enabled   Tom Rini
• [PATCH V2 0/6] Convert COUNTER_FREQUENCY to CONFIG_COUNTER_FREQUENCY   Tom Rini
• [PATCH] treewide: Enable SPL_SEPARATE_BSS if SPL_BSS_START_ADDR is used   Tom Rini
• [PATCH V2 1/4] imx: imx8mp_evk: enable CONFIG_DM_SERIAL   Tom Rini
• [PATCH 0/6] introduce Arm FF-A support   Tom Rini
• [PATCH v2 0/4] Add Nuvoton NPCM750 support   Tom Rini
• [PATCH] include/linux/byteorder: fix cpu_to_be32_array()   Tom Rini
• [PATCH v1 1/1] Makefile.lib: Re-use $(UBOOTINCLUDE) in dtc_cpp_flags   Tom Rini
• [PATCH v2 13/18] pci: Map bars with offset and length   Tom Rini
• [PATCH 00/11] virtio: Harden and test vring   Tom Rini
• [PATCH] ram: k3-ddrss: Allow use of dt provided initial frequency   Tom Rini
• [PATCH v2] image-fdt: save name of FIT configuration in '/chosen' node   Tom Rini
• [PATCH 00/11] virtio: Harden and test vring   Tom Rini
• [PATCH v2 13/18] pci: Map bars with offset and length   Tom Rini
• Pull request: u-boot-imx u-boot-imx-20220412   Tom Rini
• [PATCH 0/6] introduce Arm FF-A support   Tom Rini
• [PATCH u-boot-net v4 03/14] net: introduce helpers to get PHY ofnode from MAC   Tom Rini
• Please pull u-boot-net/next   Tom Rini
• [PATCH v7 09/15] disk: Correct the conditions for SPL   Tom Rini
• [v3, 3/3] pinctrl: mediatek: add support for different types of IO pins   Tom Rini
• [PATCH 1/2] led: bcm6753: Drop duplicate OF "label" property parsing   Tom Rini
• [PATCH 2/2] led: pwm: Drop duplicate OF "label" property parsing   Tom Rini
• [PATCH] sandbox: Increase default SYS_MALLOC_LEN   Tom Rini
• [PATCH u-boot-net v4 03/14] net: introduce helpers to get PHY ofnode from MAC   Tom Rini
• [PATCH 1/1] arm: apple: Add M1 Ultra support   Tom Rini
• [PATCH] power: domain: ti: Extend use of PTCMD and PTSTAT registers for high PDs   Tom Rini
• [PATCH] misc: atsha204a: Fix big endian support   Tom Rini
• [PATCH] led: Configure LED default-state on boot   Tom Rini
• [PATCH 1/6] led: Move OF "label" property parsing to core   Tom Rini
• [PATCH 2/6] led: bcm6328: Drop duplicate OF "label" property parsing   Tom Rini
• [PATCH 3/6] led: bcm6358: Drop duplicate OF "label" property parsing   Tom Rini
• [PATCH 4/6] led: bcm6858: Drop duplicate OF "label" property parsing   Tom Rini
• [PATCH 5/6] led: cortina: Drop duplicate OF "label" property parsing   Tom Rini
• [PATCH 6/6] led: gpio: Drop duplicate OF "label" property parsing   Tom Rini
• [PATCH 1/2] led: bcm6753: Drop duplicate OF "label" property parsing   Tom Rini
• [PATCH 2/2] led: pwm: Drop duplicate OF "label" property parsing   Tom Rini
• [PATCH] sandbox: Increase default SYS_MALLOC_LEN   Tom Rini
• [PATCH] cmd: ubi.c: skip part command if right partition is already attached   Tom Rini
• [PATCH 1/4] serial: Fix _serial_puts using \n\r instead of \r\n   Tom Rini
• [PATCH 2/4] serial: sandbox: Implement puts   Tom Rini
• [PATCH 3/4] test: serial: Add test for putc/puts   Tom Rini
• [PATCH 4/4] serial: smh: Implement puts for DM   Tom Rini
• [PATCH] Remove duplication of table_compute_checksum function   Tom Rini
• [PATCH] fs: Allow to compile FS_FAT only for proper U-Boot   Tom Rini
• [PATCH] fs: Allow to compile CMD_UBIFS when SPL is enabled   Tom Rini
• [RFC] disk: don't compile in partition support for spl/tpl if not really necessary   Tom Rini
• [RFC] disk: don't compile in partition support for spl/tpl if not really necessary   Tom Rini
• [PATCH v2 0/6] introduce Arm FF-A support   Tom Rini
• [PATCH] CI: Print out unmigrated symbols when failing   Tom Rini
• Please pull u-boot-net/next   Tom Rini
• [PATCH 04/11] arm: mach-k3: Introduce the basic files to support AM62   Tom Rini
• [PATCH 02/11] dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM62   Tom Rini
• [PATCH 07/11] arm: dts: Introduce base AM62 SoC dtsi files   Tom Rini
• [PATCH 04/11] arm: mach-k3: Introduce the basic files to support AM62   Tom Rini
• Pull request for efi-2022-07-rc1-2   Tom Rini
• [RFC] disk: don't compile in partition support for spl/tpl if not really necessary   Tom Rini
• [PATCH v2 03/11] test: eth: Add test for ethernet addresses   Tom Rini
• [PATCH 3/7] disk: define nullified functions for !PARTITIONS   Tom Rini
• [PATCH 3/7] disk: define nullified functions for !PARTITIONS   Tom Rini
• [PATCH 02/10] sandbox: Correct loss of early output in SPL   Tom Rini
• [PATCH 03/10] Makefile: Drop a stale comment about linking   Tom Rini
• [PATCH 04/10] Makefile: Avoid resetting link flags in config.mk   Tom Rini
• [PATCH 05/10] sandbox: Allow link flags to be given   Tom Rini
• [PATCH 06/10] sandbox: Align linker lists to a 32-byte boundary   Tom Rini
• [PATCH 07/10] dm: core: Allow devres to be disabled in SPL   Tom Rini
• [PATCH 08/10] dm: core: Deal with a wrinkle with linker lists   Tom Rini
• [PATCH] Convert CONFIG_SYS_MEM_TOP_HIDE to Kconfig   Tom Rini
• Pull request: u-boot-rockchip-20220418   Tom Rini
• [PATCH] nds32: Remove the architecture   Tom Rini
• tools/image-host.c build error   Tom Rini
• Handle unaligned read at fs layer?   Tom Rini
• Falcon Mode Support For Uncompressed Kernel Images   Tom Rini
• [PATCH] cmd: Add pause command   Tom Rini
• U-Boot and switching away from arch/arm/mach-imx/mkimage_fit_atf.sh   Tom Rini
• [PATCH 1/1] drivers: add memory disk support   Tom Rini
• Falcon Mode Support For Uncompressed Kernel Images   Tom Rini
• Falcon Mode Support For Uncompressed Kernel Images   Tom Rini
• [PATCH 1/1] drivers: add memory disk support   Tom Rini
• [PATCH 1/1] drivers: add memory disk support   Tom Rini
• [PATCH 3/7] disk: define nullified functions for !PARTITIONS   Tom Rini
• [PATCH] Convert CONFIG_SYS_MEM_TOP_HIDE to Kconfig   Tom Rini
• [PATCH v2] IOMUX: Fix access past end of console_devices   Tom Rini
• [PATCH] btrfs: Fix compilation on big endian systems   Tom Rini
• [PATCH] fs: Allow to compile FS_BTRFS when SPL is enabled   Tom Rini
• [PATCH] tools: add boot/ to .gitignore   Tom Rini
• [PATCH] .mailmap: Start to use new amd.com email address   Tom Rini
• [PATCH] gpio: aspeed: Fix incorrect offset of read back register.   Tom Rini
• [PATCH 1/1] fs/squashfs: simplify sqfs_read()   Tom Rini
• [PATCH 1/1] image-fit: don't check free() argument   Tom Rini
• [PATCH] configs: Enable EXT4 and ISO partitions for the DeveloperBox   Tom Rini
• [PATCH v2] image-fdt: save name of FIT configuration in '/chosen' node   Tom Rini
• [PATCH 1/1] drivers: add memory disk support   Tom Rini
• [PATCH 1/1] drivers: add memory disk support   Tom Rini
• [PATCH v1] imx: imx8qm-rom7720: switch to binman   Tom Rini
• RFC: Adding U-Boot version in FDT chosen node   Tom Rini
• [PATCH v2] ram: k3-ddrss: Fix register name and explain its usage   Tom Rini
• [PATCH] ram: k3-ddrss: Allow use of dt provided initial frequency   Tom Rini
• [PATCH 1/2] Kconfig: Change SYS_MALLOC_F_LEN default to 0x2000   Tom Rini
• [PATCH 2/2] am33xx: Update SYS_MALLOC_F_LEN to use 0x2000 as the default   Tom Rini
• [PATCH v2] image: fdt: Fix DT relocation handling with multiple DRAM banks with gap   Tom Rini
• [PATCH v2] cmd: gpio: Add `gpio read` subcommand   Tom Rini
• CVE-2018-25032 on u-boot zlib   Tom Rini
• [RFC PATCH v3 00/23] Modernize U-Boot shell   Tom Rini
• [PATCH 5/7] efi_loader: PARTITION_UUIDS should be optional   Tom Rini
• [PATCH 1/3] env: Implement lower priority arch_env_get_location()   Tom Rini
• [PATCH 2/3] armv8: layerscape: env: Switch to arch_env_get_location()   Tom Rini
• [PATCH 3/3] ARM: imx: imx8m: env: Switch to arch_env_get_location()   Tom Rini
• [PATCH] fs: Allow to compile FS_SQUASHFS only for proper U-Boot   Tom Rini
• [PATCH 1/3] arm: dts: Resync dts for BeagleBone and derivatives   Tom Rini
• [PATCH 2/3] board: ti: am335x: Add BBE Lite support   Tom Rini
• [PATCH 3/3] board: ti: am335x: Add support for BBE Extended WiFi   Tom Rini
• [PATCH v2] treewide: Enable SPL_SEPARATE_BSS if SPL_BSS_START_ADDR is used   Tom Rini
• [PATCH] ARM: armv7: add non-SPL enable for Cortex SMPEN   Tom Rini
• [PATCH] ARM: armv7: add non-SPL enable for Cortex SMPEN   Tom Rini
• Please pull u-boot-marvell/master   Tom Rini
• [PATCH v2] SPL: Do not enable SPL_SYS_MALLOC_SIMPLE without SPL_FRAMEWORK by default   Tom Rini
• [PATCH 1/5] crc16-ccitt: Rename file with CRC-16-CCITT implementation to crc16-ccitt.c   Tom Rini
• [PATCH 2/5] crc16: Rename fs/ubifs/crc16.h to include/linux/crc16.h   Tom Rini
• [PATCH 3/5] crc16: Move standard CRC-16 implementation from ubifs to lib   Tom Rini
• [PATCH 4/5] fs: ext4: Use CRC-16 implementation from linux/crc16.h   Tom Rini
• [PATCH 5/5] misc: atsha204a: Remove duplicate CRC-16 implementation   Tom Rini
• [PATCH V4 1/6] xilinx: versal: board: use CONFIG_COUNTER_FREQUENCY   Tom Rini
• [PATCH V4 2/6] arch: arm: move COUNTER_FREQUENCY from versal to arm   Tom Rini
• [PATCH V4 3/6] arch: arm: Kconfig: set default COUNTER_FREQUENCY   Tom Rini
• [PATCH V4 4/6] configs: set CONFIG_COUNTER_FREQUENCY   Tom Rini
• [PATCH V4 5/6] include/configs: drop COUNTER_FREQUENCY   Tom Rini
• [PATCH V4 6/6] arm: set cntfrq_el0 if CONFIG_COUNTER_FREQUENCY is valid   Tom Rini
• [PATCH] nds32: Remove the architecture   Tom Rini
• [PATCH] cmd: part: add explicit dependency on PARTITIONS   Tom Rini
• Pull request: u-boot-imx u-boot-imx-20220422   Tom Rini
• Please pull u-boot-watchdog/master   Tom Rini
• [PULL] u-boot-usb/master   Tom Rini
• Please pull u-boot-pmic master   Tom Rini
• [PATCH] cpu: 83xx: Add missing dependency on CPU_MPC83XX   Tom Rini
• [PATCH] MAINTAINERS: Add Alper as a binman maintainer   Tom Rini
• [PATCH] misc: Fix always compiling MISC even for SPL/TPL   Tom Rini
• [PATCH] fdt: Add -q option to fdt addr for distro_bootcmd   Tom Rini
• [PATCH v2] cmd: adc: Add support for storing ADC result in env variable   Tom Rini
• [PATCH] fdt: Fix TPL SEPARATE_BSS check when locating DTB   Tom Rini
• [PATCH v3] Allow colon in PXE bootfile URLs   Tom Rini
• [PATCH] arm: apple: Don't clear framebuffer   Tom Rini
• [PATCH] arm: apple: Point stdout-path to framebuffer when keyboard present   Tom Rini
• [PATCH] ARM: imx: imx8q: Use LPUART_BASE macro in config files   Tom Rini
• [PATCH 1/4] ARM: imx: imx8m: Introduce and use UART_BASE_ADDR(n)   Tom Rini
• [PATCH 1/4] ARM: imx: imx8m: Introduce and use UART_BASE_ADDR(n)   Tom Rini
• [PATCH 2/3] led: Mark device instance with DM_FLAG_PROBE_AFTER_BIND   Tom Rini
• Pull request for efi-2022-07-rc1-3   Tom Rini
• [PATCH] cmd: part: add explicit dependency on PARTITIONS   Tom Rini
• [PATCH] nds32: Remove the architecture   Tom Rini
• [PATCH v5 00/34] Initial implementation of standard boot   Tom Rini
• [ANN] U-Boot v2022.07-rc1 released   Tom Rini
• [scan-admin at coverity.com: New Defects reported by Coverity Scan for Das U-Boot]   Tom Rini
• [PATCH v5 00/34] Initial implementation of standard boot   Tom Rini
• [PULL] u-boot-at91-2022.07-b   Tom Rini
• [PATCH v5 00/12] efi_loader: more tightly integrate UEFI disks to driver model   Tom Rini
• [PATCH] tools: mkimage: Avoid ENODATA in host tools   Tom Rini
• Suggestion: Revert commit c7fad78ec0ee ("Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig")   Tom Rini
• Suggestion: Revert commit c7fad78ec0ee ("Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig")   Tom Rini
• Suggestion: Revert commit c7fad78ec0ee ("Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig")   Tom Rini
• [PATCH v1] ARM: dts: imx: Fix iMX6QDL DHCOM PDK2 DTC Warnings   Tom Rini
• Suggestion: Revert commit c7fad78ec0ee ("Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig")   Tom Rini
• [PATCH v1] ARM: dts: imx: Fix iMX6QDL DHCOM PDK2 DTC Warnings   Tom Rini
• [GIT PULL] Please pull u-boot-amlogic-20220427   Tom Rini
• pull request of u-boot-mpc85xx, fsl-qoriq for v2022.07   Tom Rini
• [PATCH 4/4] spl: spl_nand: Fix bad block handling in fitImage   Tom Rini
• [PATCH] ls10xxx: Use a sane SPL_SYS_MALLOC_F_LEN default   Tom Rini
• [PATCH 1/3] dm: core: Add DM_FLAG_PROBE_AFTER_BIND flag   Tom Rini
• [PATCH 2/3] led: Mark device instance with DM_FLAG_PROBE_AFTER_BIND   Tom Rini
• [PATCH 3/3] led: gpio: Check device compatible string to determine the top level node   Tom Rini
• [PATCH] led: gpio: Use NOP uclass driver for top-level node   Tom Rini
• [PATCH] led: Drop led_default_state()   Tom Rini
• [PATCH 1/2] test: dm: led: Fix LED enumeration   Tom Rini
• [PATCH 2/2] test: dm: pinmux: Get LED2 udevice in the pinmux test   Tom Rini
• [PATCH] dt-bindings: leds: import common led bindings from linux 5.17   Tom Rini
• U-Boot and ethernet regression on mx6cuboxi   Tom Rini
• U-Boot and ethernet regression on mx6cuboxi   Tom Rini
• root access and u-boot-test-hooks scripts   Tom Rini
• root access and u-boot-test-hooks scripts   Tom Rini
• U-Boot and ethernet regression on mx6cuboxi   Tom Rini
• [PATCH v3 01/13] sandbox: net: Add aliases for ethernet devices   Tom Rini
• [PATCH v3 10/13] net: Add support for reading mac addresses from nvmem cells   Tom Rini
• [PATCH v3 12/13] test: Load mac address using RTC   Tom Rini
• [PATCH 00/12] sunxi: Devicetree sync from Linux v5.18-rc1   Tom Rini
• [PATCH v2 03/12] sandbox: Migrate getopt section to linker list   Tom Rini
• [PATCH 00/12] sunxi: Devicetree sync from Linux v5.18-rc1   Tom Rini
• [PATCH 1/8] doc: Correct position of gdb '--args' parameter   Tom Rini
• [PATCH 2/8] acpi: Fix buffer overflow in do_acpi_dump()   Tom Rini
• [PATCH 3/8] x86: sandbox: Add missing PCI bar to barinfo   Tom Rini
• [PATCH 4/8] usb: sandbox: Check for string end in copy_to_unicode()   Tom Rini
• [PATCH 5/8] usb: sandbox: Bounds check read from buffer   Tom Rini
• [PATCH 6/8] sound: Fix buffer overflow in square wave generation   Tom Rini
• [PATCH 7/8] test: Fix pointer overrun in dm_test_devm_regmap()   Tom Rini
• [PATCH 8/8] test: dm: devres: Remove use-after-free   Tom Rini
• [PATCH 00/12] sunxi: Devicetree sync from Linux v5.18-rc1   Tom Rini
• [PATCH 03/25] tegra: Migrate CI_UDC_HAS_HOSTPC to Kconfig   Peter Robinson
• [PATCH v5 00/34] Initial implementation of standard boot   Peter Robinson
• [PATCH v8] wdt: nuvoton: Add support for Nuvoton   Stefan Roese
• [PATCH] misc: atsha204a: Fix big endian support   Stefan Roese
• [PATCH] misc: atsha204a: Add support for atsha204 chip   Stefan Roese
• [PATCH] misc: atsha204a: Add support for atsha204 chip   Stefan Roese
• [RFC PATCH 0/7] spl: Use common function for loading/parsing images   Stefan Roese
• [RFC PATCH 1/7] spl: Add generic spl_load function   Stefan Roese
• [RFC PATCH 2/7] spl: Convert ext to use spl_load   Stefan Roese
• [RFC PATCH 3/7] spl: Convert fat to spl_load   Stefan Roese
• [RFC PATCH 4/7] spl: Convert mmc to spl_load   Stefan Roese
• [RFC PATCH 5/7] spl: Convert net to spl_load   Stefan Roese
• [RFC PATCH 6/7] spl: Convert nor to spl_load   Stefan Roese
• [RFC PATCH 7/7] spl: Convert spi to spl_load   Stefan Roese
• [PATCH] pci: Do not enable PCIe ASMedia ASM2824 workaround by default   Stefan Roese
• [PATCH v3 1/4] arm: mvebu: dts: uDPU: update DTS   Stefan Roese
• [PATCH v3 2/4] net: mvneta: add SFP TX disable handling   Stefan Roese
• [PATCH v3 3/4] arm: mvebu: dts: uDPU: fix non-working networking   Stefan Roese
• [PATCH v3 4/4] mvebu: uDPU: update defconfig   Stefan Roese
• [PATCH v2 00/52] mips: octeon: Add ethernet support   Stefan Roese
• [PATCH v2 01/52] mips: octeon: Add misc cvmx-* header files   Stefan Roese
• [PATCH v2 02/52] mips: octeon: Add cvmx-ilk-defs.h header file   Stefan Roese
• [PATCH v2 03/52] mips: octeon: Add cvmx-iob-defs.h header file   Stefan Roese
• [PATCH v2 04/52] mips: octeon: Add cvmx-lbk-defs.h header file   Stefan Roese
• [PATCH v2 05/52] mips: octeon: Add cvmx-npei-defs.h header file   Stefan Roese
• [PATCH v2 06/52] mips: octeon: Add cvmx-pcsxx-defs.h header file   Stefan Roese
• [PATCH v2 07/52] mips: octeon: Add cvmx-xcv-defs.h header file   Stefan Roese
• [PATCH v2 08/52] mips: octeon: Misc changes to existing headers for upcoming eth support   Stefan Roese
• [PATCH v2 09/52] mips: octeon: Add cvmx-helper-agl.c   Stefan Roese
• [PATCH v2 10/52] mips: octeon: Add cvmx-helper-bgx.c   Stefan Roese
• [PATCH v2 11/52] mips: octeon: Add cvmx-helper-board.c   Stefan Roese
• [PATCH v2 12/52] mips: octeon: Add cvmx-helper-fpa.c   Stefan Roese
• [PATCH v2 13/52] mips: octeon: Add cvmx-helper-ilk.c   Stefan Roese
• [PATCH v2 14/52] mips: octeon: Add cvmx-helper-ipd.c   Stefan Roese
• [PATCH v2 15/52] mips: octeon: Add cvmx-helper-loop.c   Stefan Roese
• [PATCH v2 16/52] mips: octeon: Add cvmx-helper-npi.c   Stefan Roese
• [PATCH v2 17/52] mips: octeon: Add cvmx-helper-pki.c   Stefan Roese
• [PATCH v2 18/52] mips: octeon: Add cvmx-helper-pko.c   Stefan Roese
• [PATCH v2 19/52] mips: octeon: Add cvmx-helper-pko3.c   Stefan Roese
• [PATCH v2 20/52] mips: octeon: Add cvmx-helper-rgmii.c   Stefan Roese
• [PATCH v2 21/52] mips: octeon: Add cvmx-helper-sgmii.c   Stefan Roese
• [PATCH v2 23/52] mips: octeon: Add cvmx-helper-xaui.c   Stefan Roese
• [PATCH v2 24/52] mips: octeon: Add cvmx-agl.c   Stefan Roese
• [PATCH v2 26/52] mips: octeon: Add cvmx-fau-compat.c   Stefan Roese
• [PATCH v2 27/52] mips: octeon: Add cvmx-fpa.c   Stefan Roese
• [PATCH v2 30/52] mips: octeon: Add cvmx-ilk.c   Stefan Roese
• [PATCH v2 33/52] mips: octeon: Add cvmx-pki-resources.c   Stefan Roese
• [PATCH v2 34/52] mips: octeon: Add cvmx-pko.c   Stefan Roese
• [PATCH v2 35/52] mips: octeon: Add cvmx-pko3.c   Stefan Roese
• [PATCH v2 37/52] mips: octeon: Add cvmx-pko3-compat.c   Stefan Roese
• [PATCH v2 38/52] mips: octeon: Add cvmx-pko3-resources.c   Stefan Roese
• [PATCH v2 39/52] mips: octeon: Add cvmx-pko-internal-ports-range.c   Stefan Roese
• [PATCH v2 40/52] mips: octeon: Add cvmx-qlm-tables.c   Stefan Roese
• [PATCH v2 42/52] mips: octeon: Misc changes to existing C files for upcoming eth support   Stefan Roese
• [PATCH v2 43/52] mips: octeon: Makefile: Enable building of the newly added C files   Stefan Roese
• [PATCH v2 44/52] mips: octeon: cpu.c: Move bootmem init to arch_early_init_r()   Stefan Roese
• [PATCH v2 45/52] mips: octeon: cpu.c: Implement configure_lmtdma_window()   Stefan Roese
• [PATCH v2 46/52] mips: octeon: octeon_common.h: Move init SP because of increased image size   Stefan Roese
• [PATCH v2 47/52] mips: octeon: mrvl, cn73xx.dtsi: Add ethernet (BGX) and SMI DT nodes   Stefan Roese
• [PATCH v2 48/52] mips: octeon: mrvl, octeon-ebb7304.dts: Add ethernet DT support   Stefan Roese
• [PATCH v2 49/52] mips: octeon: mrvl, octeon-nic23.dts: Add ethernet DT support   Stefan Roese
• [PATCH v2 50/52] net: Add ethernet support for MIPS Octeon   Stefan Roese
• [PATCH v2 51/52] mips: octeon: ebb7304: Enable ethernet support   Stefan Roese
• [PATCH v2 52/52] mips: octeon: nic23: Enable ethernet support   Stefan Roese
• [PATCH] misc: atsha204a: Fix big endian support   Stefan Roese
• [RFC PATCH 1/7] spl: Add generic spl_load function   Stefan Roese
• [RFC Patch] arm: kirkwood: nsa310s: Use Marvell uclass mvgbe and PHY driver for DM Ethernet   Stefan Roese
• [PATCH] net: marvell: mvgbe: Set PHY page 0 before phy_connect   Stefan Roese
• [PATCH u-boot-mvebu v3 0/5] arm: mvebu: a37xx: Add support for reading OTP   Stefan Roese
• [PATCH v3] arm: kirkwood: nas220: Add DM Ethernet, SATA, GPIO   Stefan Roese
• [PATCH 2/2] Add SCSI scan for ENV in EXT4 or FAT   Stefan Roese
• [PATCH 1/2] Fix Espressobin build for configs where ENV is not in SPI   Stefan Roese
• [PATCH] tools/mrvl_uart.sh: Remove script   Stefan Roese
• [PATCH u-boot-mvebu v3 0/5] arm: mvebu: a37xx: Add support for reading OTP   Stefan Roese
• [PATCH v3 1/4] arm: mvebu: dts: uDPU: update DTS   Stefan Roese
• [PATCH v3 2/4] net: mvneta: add SFP TX disable handling   Stefan Roese
• [PATCH v3 3/4] arm: mvebu: dts: uDPU: fix non-working networking   Stefan Roese
• [PATCH v3 4/4] mvebu: uDPU: update defconfig   Stefan Roese
• [PATCH] arm: mvebu: Add support for reading LD0 and LD1 eFuse   Stefan Roese
• [PATCH] tools: kwboot: Replace fstat()+st_size by lseek()+SEEK_END   Stefan Roese
• [PATCH] arm: mvebu: turris_omnia: Enable CONFIG_CMD_FUSE   Stefan Roese
• [PATCH u-boot-marvell v2 1/3] arm: Introduce new CONFIG_SPL_SYS_NO_VECTOR_TABLE option   Stefan Roese
• [PATCH u-boot-marvell v2 2/3] arm: Do not compile vector table when SYS_NO_VECTOR_TABLE is enabled   Stefan Roese
• [PATCH u-boot-marvell v2 3/3] arm: mvebu: Enable CONFIG_SPL_SYS_NO_VECTOR_TABLE for 32-bit mvebu   Stefan Roese
• [PATCH] arm: mvebu: a37xx: Add support for writing Security OTP values   Stefan Roese
• [PATCH 1/4] board: turris: Move Turris Atsha OTP code to separate file   Stefan Roese
• [PATCH 2/4] board: turris: Do not cache Atsha device in BSS   Stefan Roese
• [PATCH 3/4] board: turris: Allow to specify first eth idx of first MAC address   Stefan Roese
• [PATCH 4/4] board: turris: Rename atsha204a at 64 DT node to crypto at 64   Stefan Roese
• [PATCH v2] arm: kirkwood: Sheevaplug : Use Marvell uclass mvgbe and PHY driver for Ethernet   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH] net: marvell: mvgbe: Set PHY page 0 before phy_connect   Stefan Roese
• [PATCH 1/5] crc16-ccitt: Rename file with CRC-16-CCITT implementation to crc16-ccitt.c   Stefan Roese
• [PATCH 2/5] crc16: Rename fs/ubifs/crc16.h to include/linux/crc16.h   Stefan Roese
• [PATCH 3/5] crc16: Move standard CRC-16 implementation from ubifs to lib   Stefan Roese
• [PATCH 4/5] fs: ext4: Use CRC-16 implementation from linux/crc16.h   Stefan Roese
• [PATCH 5/5] misc: atsha204a: Remove duplicate CRC-16 implementation   Stefan Roese
• [PATCH] net: marvell: mvgbe: Set PHY page 0 before phy_connect   Stefan Roese
• [PATCH u-boot-marvell 6/8] arm: mvebu: turris_omnia: Extract code for disabling sata/pcie   Stefan Roese
• [PATCH v8] wdt: nuvoton: Add support for Nuvoton   Stefan Roese
• [PATCH] doc: device-tree-bindings: watchdog: document common properties   Stefan Roese
• Please pull u-boot-watchdog/master   Stefan Roese
• [PATCH][RESEND] mtd: spi-nor-ids: Add Winbond W25Q128JW ID   Stefan Roese
• [PATCH] net: marvell: mvgbe: Set PHY page 0 before phy_connect   Stefan Roese
• [PATCH] net: marvell: mvgbe: Set PHY page 0 before phy_connect   Stefan Roese
• [PATCH] net: e1000: Depend on CONFIG_PCI   Stefan Roese
• [PATCH v3 00/15] Add support for MediaTek MT7621 SoC   Stefan Roese
• [PATCH v3 02/15] mips: mtmips: add two reference boards for mt7621   Stefan Roese
• [PATCH] watchdog: Fix SPL build with watchdog disabled in asm files   Stefan Roese
• fsl_hash.c: Alignment problem when using caam_hash() for FIT images   Stefan Roese
• [EXT] fsl_hash.c: Alignment problem when using caam_hash() for FIT images   Stefan Roese
• [PATCH] crypto: fsl_hash: Remove unnecessary alignment check in caam_hash()   Stefan Roese
• [PATCH 0/3] powerpc: mpc85xx: Cleanup code   Pali Rohár
• [PATCH 1/3] powerpc: mpc85xx: Drop _start symbol   Pali Rohár
• [PATCH 2/3] powerpc: mpc85xx: Rename _start_e500 symbol to _start   Pali Rohár
• [PATCH 3/3] powerpc: mpc85xx: Show e500 core version   Pali Rohár
• [PATCH 0/3] mmc: fsl_esdhc_spl: Fix booting P2020 from SD card   Pali Rohár
• [PATCH 1/3] mmc: fsl_esdhc_spl: pre-PBL: check for BOOT signature instead of MBR/DBR   Pali Rohár
• [PATCH 2/3] mmc: fsl_esdhc_spl: pre-PBL: fix determining U-Boot size   Pali Rohár
• [PATCH 3/3] mmc: fsl_esdhc_spl: Call mmc_init() before booting from SD card   Pali Rohár
• [PATCH] mmc: mmc_mode_name() is used also when LOGLEVEL >= LOGL_DEBUG   Pali Rohár
• [PATCH 0/3] powerpc: p2020: Allow to compile it without env support   Pali Rohár
• [PATCH 1/3] hwconfig: Allow to compile it without env support   Pali Rohár
• [PATCH 2/3] ddr: fsl: Allow to compile it without env support   Pali Rohár
• [PATCH 3/3] board: freescale: p1_p2_rdb_pc: Allow to compile it without env support   Pali Rohár
• [PATCH] misc: atsha204a: Fix big endian support   Pali Rohár
• [PATCH 0/2] powerpc: dts: p2020: Allow to use P2020 DTS files from Linux   Pali Rohár
• [PATCH 1/2] powerpc: dts: p2020: Add fsl/p2020si-pre.dtsi and fsl/p2020si-post.dtsi symlinks   Pali Rohár
• [PATCH 2/2] powerpc: dts: p2020: Add serial0 and serial1 via pq3-duart-0.dtsi   Pali Rohár
• [PATCH 0/5] mtd: rawnand: fsl_elbc: Device tree support   Pali Rohár
• [PATCH 1/5] mtd: rawnand: fsl_elbc: Implement RNDOUT command   Pali Rohár
• [PATCH 2/5] mtd: rawnand: fsl_elbc: Add device tree support   Pali Rohár
• [PATCH 3/5] mtd: rawnand: fsl_elbc: Use ECC configuration from device tree   Pali Rohár
• [PATCH 4/5] mtd: nand: raw: Add support for DT property nand-ecc-algo=bch   Pali Rohár
• [PATCH 5/5] powerpc: dts: p2020: Add localbus node   Pali Rohár
• [PATCH] mmc: fsl_esdhc: Define macro ESDHCCTL_SNOOP for Snoop attribute   Pali Rohár
• [PATCH] mmc: fsl_esdhc_spl: pre-PBL: implement redundancy support   Pali Rohár
• Bug in p1_p2_rdb_pc? Caching-inhibited bit for initial L2 SRAM entry in TLB   Pali Rohár
• [PATCH v2] powerpc: dts: p2020: Add localbus node   Pali Rohár
• [PATCH] powerpc: dts: p1020/p2020: Fix esdhc node name   Pali Rohár
• [PATCH] SPL: Do not enable SPL_SYS_MALLOC_SIMPLE without SPL_FRAMEWORK by default   Pali Rohár
• [PATCH] misc: atsha204a: Add support for atsha204 chip   Pali Rohár
• [PATCH 0/8] powerpc: mpc85xx: Fix and cleanup mpc85xx code   Pali Rohár
• [PATCH 1/8] powerpc: mpc85xx: Fix CONFIG_OF_SEPARATE support   Pali Rohár
• [PATCH 2/8] powerpc: mpc85xx: Remove duplicate u-boot-nand.lds   Pali Rohár
• [PATCH 3/8] powerpc: mpc85xx: Remove u-boot-nand_spl.lds   Pali Rohár
• [PATCH 4/8] powerpc: mpc85xx: Remove useless SIZEOF_HEADERS and .interp from ld script   Pali Rohár
• [PATCH 5/8] powerpc: mpc85xx: Put bss after image when not including reset vector   Pali Rohár
• [PATCH 6/8] powerpc: mpc85xx: Define linker sections in ascending order   Pali Rohár
• [PATCH 7/8] powerpc: mpc85xx: Set TEXT_BASE addresses to real base values   Pali Rohár
• [PATCH 8/8] board: freescale: p1_p2_rdb_pc: Simplify SPL offset macros   Pali Rohár
• [PATCH] misc: atsha204a: Add support for atsha204 chip   Pali Rohár
• [PATCH 0/2] powerpc: mpc85xx: Add support for generating QorIQ pre-PBL eSDHC boot sector   Pali Rohár
• [PATCH 1/2] powerpc: mpc85xx: Add support for generating QorIQ pre-PBL eSDHC boot sector   Pali Rohár
• [PATCH 2/2] board: freescale: p1_p2_rdb_pc: Calculate offsets for eSDHC boot sector   Pali Rohár
• [PATCH] fs: Allow to compile FS_FAT only for proper U-Boot   Pali Rohár
• [PATCH] fs: Allow to compile CMD_UBIFS when SPL is enabled   Pali Rohár
• [PATCH] misc: atsha204a: Add support for atsha204 chip   Pali Rohár
• [PATCH 0/8] powerpc: mpc85xx: Fix and cleanup mpc85xx code   Pali Rohár
• [PATCH] doc: distro: Update list of all support boot types   Pali Rohár
• [PATCH 1/5] arm: mvebu: turris_omnia: Fix RESET button message   Pali Rohár
• [PATCH 2/5] arm: mvebu: turris_omnia: Define CONFIG_ETHPRIME instead of ethact= ENV   Pali Rohár
• [PATCH 3/5] arm: mvebu: turris_omnia: Always enable MMC, SCSI and USB boot targets   Pali Rohár
• [PATCH 4/5] arm: mvebu: turris_omnia: Add NVMe to boot targets   Pali Rohár
• [PATCH 5/5] arm: mvebu: turris_mox: Add NVMe and SCSI to boot targets   Pali Rohár
• [PATCH] arm: mvebu: Add support for reading LD0 and LD1 eFuse   Pali Rohár
• [PATCH] tools: kwboot: Replace fstat()+st_size by lseek()+SEEK_END   Pali Rohár
• [PATCH] arm: mvebu: turris_omnia: Enable CONFIG_CMD_FUSE   Pali Rohár
• [RFC PATCH] RFC: Replace CONFIG_SYS_BAUDRATE_TABLE by board and UART driver rounding functions   Pali Rohár
• [PATCH u-boot-marvell v2 1/3] arm: Introduce new CONFIG_SPL_SYS_NO_VECTOR_TABLE option   Pali Rohár
• [PATCH u-boot-marvell v2 2/3] arm: Do not compile vector table when SYS_NO_VECTOR_TABLE is enabled   Pali Rohár
• [PATCH u-boot-marvell v2 3/3] arm: mvebu: Enable CONFIG_SPL_SYS_NO_VECTOR_TABLE for 32-bit mvebu   Pali Rohár
• [PATCH] pci: Do not enable PCIe ASMedia ASM2824 workaround by default   Pali Rohár
• [PATCH] squashfs: Fix compilation on big endian systems   Pali Rohár
• [PATCH] fs: Allow to compile FS_SQUASHFS only for proper U-Boot   Pali Rohár
• [PATCH] misc: atsha204a: Fix big endian support   Pali Rohár
• [PATCH] arm: mvebu: a37xx: Add support for writing Security OTP values   Pali Rohár
• [PATCH] squashfs: Fix compilation on big endian systems   Pali Rohár
• [PATCH] squashfs: Fix compilation on big endian systems   Pali Rohár
• [PATCH 00/11] board: freescale: p1_p2_rdb_pc: Various cleanups and fixes   Pali Rohár
• [PATCH 01/11] board: freescale: p1_p2_rdb_pc: Do not hang in checkboard()   Pali Rohár
• [PATCH 02/11] board: freescale: p1_p2_rdb_pc: Detect both P2020 SD switch configurations   Pali Rohár
• [PATCH 03/11] board: freescale: p1_p2_rdb_pc: Fix parsing negated upper 4 bits from boot input data   Pali Rohár
• [PATCH 04/11] board: freescale: p1_p2_rdb_pc: Do not set MPC85xx_PMUXCR_SDHC_WP bit when SDHC_WP is used as GPIO   Pali Rohár
• [PATCH 05/11] board: freescale: p1_p2_rdb_pc: Fix page attributes for second 1G SDRAM map   Pali Rohár
• [PATCH 06/11] board: freescale: p1_p2_rdb_pc: Move ifdef for USB/eLBC check to correct place   Pali Rohár
• [PATCH 07/11] board: freescale: p1_p2_rdb_pc: Fix env $vscfw_addr   Pali Rohár
• [PATCH 08/11] board: freescale: p1_p2_rdb_pc: Use named macros for i2c bus num and address   Pali Rohár
• [PATCH 09/11] board: freescale: p1_p2_rdb_pc: Define SW macros for lower and upper NOR banks   Pali Rohár
• [PATCH 10/11] board: freescale: p1_p2_rdb_pc: Move BootROM change source macros to p1_p2_bootrom.h   Pali Rohár
• [PATCH 11/11] board: freescale: p1_p2_rdb_pc: Add env commands norlowerboot, norupperboot, sd2boot and defboot   Pali Rohár
• [PATCH] arm: mvebu: Add support for reading LD0 and LD1 eFuse   Pali Rohár
• [PATCH] btrfs: Fix compilation on big endian systems   Pali Rohár
• [PATCH] fs: Allow to compile FS_BTRFS when SPL is enabled   Pali Rohár
• [PATCH v2] SPL: Do not enable SPL_SYS_MALLOC_SIMPLE without SPL_FRAMEWORK by default   Pali Rohár
• [PATCH 3/5] arm: mvebu: turris_omnia: Always enable MMC, SCSI and USB boot targets   Pali Rohár
• [PATCH 1/8] powerpc: mpc85xx: Fix CONFIG_OF_SEPARATE support   Pali Rohár
• [PATCH 0/9] powerpc: dts: p2020: Linux compatibility   Pali Rohár
• [PATCH 1/9] powerpc: dts: p2020: Add gpio-controller at fc00 node via pq3-gpio-0.dtsi   Pali Rohár
• [PATCH 2/9] powerpc: dts: p2020: Make PCIe nodes compatible for Linux kernel driver   Pali Rohár
• [PATCH 3/9] powerpc: dts: p2020: Add ptp_clock at 24e00 node via pq3-etsec1-timer-0.dtsi   Pali Rohár
• [PATCH 4/9] powerpc: dts: p2020: Add Linux compatible string and property for eSDHC   Pali Rohár
• [PATCH 5/9] powerpc: dts: p2020: Do not automatically disable spi at 7000 node in p2020-post.dtsi   Pali Rohár
• [PATCH 6/9] powerpc: dts: p2020: Add missing interrupts property to spi at 7000 node   Pali Rohár
• [PATCH 7/9] powerpc: dts: p2020: Make usb at 22000 node compatible for Linux kernel driver   Pali Rohár
• [PATCH 8/9] powerpc: dts: p2020: Define L2 cache node   Pali Rohár
• [PATCH 9/9] powerpc: dts: p2020: Set dfsrr property for i2c nodes   Pali Rohár
• [PATCH 1/4] board: turris: Move Turris Atsha OTP code to separate file   Pali Rohár
• [PATCH 2/4] board: turris: Do not cache Atsha device in BSS   Pali Rohár
• [PATCH 3/4] board: turris: Allow to specify first eth idx of first MAC address   Pali Rohár
• [PATCH 4/4] board: turris: Rename atsha204a at 64 DT node to crypto at 64   Pali Rohár
• [PATCH 0/5] crc16: Remove duplicate implementations   Pali Rohár
• [PATCH 1/5] crc16-ccitt: Rename file with CRC-16-CCITT implementation to crc16-ccitt.c   Pali Rohár
• [PATCH 2/5] crc16: Rename fs/ubifs/crc16.h to include/linux/crc16.h   Pali Rohár
• [PATCH 3/5] crc16: Move standard CRC-16 implementation from ubifs to lib   Pali Rohár
• [PATCH 4/5] fs: ext4: Use CRC-16 implementation from linux/crc16.h   Pali Rohár
• [PATCH 5/5] misc: atsha204a: Remove duplicate CRC-16 implementation   Pali Rohár
• [PATCH] misc: atsha204a: Fix big endian support   Pali Rohár
• Bug in p1_p2_rdb_pc? Caching-inhibited bit for initial L2 SRAM entry in TLB   Pali Rohár
• [UNTESTED PATCH] Nokia RX-51: Convert to CONFIG_DM_SERIAL   Pali Rohár
• [PATCH] pci: fsl: Change compatible string for mpc8548 to "fsl, mpc8548-pcie"   Pali Rohár
• Bug in p1_p2_rdb_pc? Caching-inhibited bit for initial L2 SRAM entry in TLB   Pali Rohár
• [PATCH u-boot-mvebu v3 0/5] arm: mvebu: a37xx: Add support for reading OTP   Pali Rohár
• [PATCH] misc: atsha204a: Add support for atsha204 chip   Pali Rohár
• [PATCH 2/2] Add SCSI scan for ENV in EXT4 or FAT   Pali Rohár
• [PATCH] misc: atsha204a: Add support for atsha204 chip   Pali Rohár
• [PATCH u-boot-marvell 6/8] arm: mvebu: turris_omnia: Extract code for disabling sata/pcie   Pali Rohár
• [PATCH u-boot-marvell 8/8] arm: mvebu: turris_omnia: Add support for USB3.0 mode in WWAN MiniPCIe slot   Pali Rohár
• [PATCH u-boot-marvell 2/8] arm: mvebu: turris_omnia: Provide env_sf_get_env_addr() function   Pali Rohár
• [PATCH] mmc: fsl_esdhc_spl: pre-PBL: implement redundancy support   Pali Rohár
• [PATCH v2] powerpc: mpc85xx: Set TEXT_BASE addresses to real base values   Pali Rohár
• [PATCH 7/8] powerpc: mpc85xx: Set TEXT_BASE addresses to real base values   Pali Rohár
• [PATCH 1/2] powerpc: mpc85xx: Add support for generating QorIQ pre-PBL eSDHC boot sector   Pali Rohár
• [PATCH v2] board: freescale: p1_p2_rdb_pc: Fix parsing inverted bits from boot input data   Pali Rohár
• [PATCH v2] board: freescale: p1_p2_rdb_pc: Move boot reset macros to p1_p2_bootsrc.h   Pali Rohár
• [PATCH v2] board: freescale: p1_p2_rdb_pc: Add env commands norlowerboot, norupperboot, sd2boot and defboot   Pali Rohár
• Suggestion: Revert commit c7fad78ec0ee ("Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig")   Pali Rohár
• Suggestion: Revert commit c7fad78ec0ee ("Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig")   Pali Rohár
• Suggestion: Revert commit c7fad78ec0ee ("Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig")   Pali Rohár
• Suggestion: Revert commit c7fad78ec0ee ("Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig")   Pali Rohár
• [PATCH 1/4] powerpc: dts: p2020: Define MPIC nodes   Pali Rohár
• [PATCH 2/4] powerpc: dts: p2020: Define crypto node   Pali Rohár
• [PATCH 3/4] powerpc: dts: p2020: Define DMA nodes   Pali Rohár
• [PATCH 4/4] powerpc: dts: p2020: Define ecm, memory and guts nodes   Pali Rohár
• [PATCH] board: freescale: p1_p2_rdb_pc: Remove mapping for TDM-PMC card   Pali Rohár
• [PATCH] dt-bindings: leds: import common led bindings from linux 5.17   Pali Rohár
• [PATCH] powerpc: mpc85xx: Fix compilation with CONFIG_WDT   Pali Rohár
• [PATCH] watchdog: Fix SPL build with watchdog disabled in asm files   Pali Rohár
• [PATCH] doc: Add device-tree-bindings for atsha204 and atsha204a   Pali Rohár
• [PATCH] misc: atsha204a: Add support for atsha204 chip   Pali Rohár
• [PATCH] board: freescale: p1_p2_rdb_pc: Allow to compile without __SW_BOOT_SD macro   Pali Rohár
• [PATCH] arm: mvebu: turris_omnia: Fix SYS_RSTOUT_* macro names   Pali Rohár
• [PATCH] misc: fs_loader: Fix compile warnings when CONFIG_CMD_UBIFS is enabled   Pali Rohár
• Error fsl_esdhc: Internal clock never stabilised.   Pali Rohár
• Error fsl_esdhc: Internal clock never stabilised.   Pali Rohár
• [PATCH] mmc: fsl_esdhc: Fix 'Internal clock never stabilised.' error   Pali Rohár
• [PATCH v2] cmd: gpio: Add `gpio read` subcommand   Diego Rondini
• [PATCH] ARM: imx: Fix parsing of ROM log event IDs on iMX8M   Fedor Ross
• [PATCH] pci: Do not enable PCIe ASMedia ASM2824 workaround by default   Maciej W. Rozycki
• [PATCH] verdin-imx8mm, verdin-imx8mp: Fix default systemd console output   Philippe Schenker
• [PATCH] arm: mvebu: clearfog_defconfig: enable setexpr command   Josef Schlehofer
• [PATCH] misc: atsha204a: Add support for atsha204 chip   Heiko Schocher
• [PATCH] i2c: ihs: intel: Fix typo in comments (actual)   Heiko Schocher
• [PATCH] misc: atsha204a: Add support for atsha204 chip   Heiko Schocher
• [PATCH v1] rtc: rv8803: fix off-by-one in month counting   Heiko Schocher
• [PATCH] imx: drop CONFIG_MXC_UART_BASE   Heiko Schocher
• RFC: Updating i.MX8M CPU thermal trip-point at runtime   Frieder Schrempf
• [PATCH] ARM: imx: imx8m: Fix board_get_usable_ram_top()   Frieder Schrempf
• Pull request for efi-2022-04-rc6   Heinrich Schuchardt
• [PATCH 1/1] doc: correct bootefi.rst   Heinrich Schuchardt
• [PATCH v4 00/11] enable menu-driven boot device selection   Heinrich Schuchardt
• [PATCH v4 11/11] doc:bootmenu: add UEFI boot variable and distro boot support   Heinrich Schuchardt
• [PATCH v4 06/11] efi_loader: bootmgr: add booting from removable media   Heinrich Schuchardt
• [PATCH v4 07/11] bootmenu: add UEFI and disto_boot entries   Heinrich Schuchardt
• [PATCH v4 02/11] lib/charset: add u16_strlcat() function   Heinrich Schuchardt
• [PATCH v4 03/11] test: unit test for u16_strlcat()   Heinrich Schuchardt
• [PATCH v4 04/11] menu: always show the menu regardless of the number of entry   Heinrich Schuchardt
• [PATCH v5 1/8] capsule: board: Add information needed for capsule updates   Heinrich Schuchardt
• [PATCH v5 4/8] efi: Define set_dfu_alt_info() for boards with UEFI capsule update enabled   Heinrich Schuchardt
• [PATCH v5 5/8] test: capsule: Modify the capsule tests to use GUID values for sandbox   Heinrich Schuchardt
• [PATCH 0/4] efi_loader: simplify string handling   Heinrich Schuchardt
• [PATCH 1/4] lib: convert u16_strlen() into a macro   Heinrich Schuchardt
• [PATCH 2/4] lib: simplify u16_strdup()   Heinrich Schuchardt
• [PATCH 3/4] efi_loader: EFI_HII_STRING_PROTOCOL.GetString()   Heinrich Schuchardt
• [PATCH 4/4] efi_loader: simplify efi_serialize_load_option()   Heinrich Schuchardt
• [PATCH 3/3] efi_loader: setting boot device   Heinrich Schuchardt
• [PATCH 3/3] efi_loader: setting boot device   Heinrich Schuchardt
• Cannot add the EFI Loader to a 64-bit EFI stubbed U-Boot   Heinrich Schuchardt
• [PATCH 0/2] sandbox: error output   Heinrich Schuchardt
• [PATCH 1/2] sandbox: add function os_printf()   Heinrich Schuchardt
• [PATCH 2/2] sandbox: show error if the device-tree cannot be loaded   Heinrich Schuchardt
• [PATCH v4 06/11] efi_loader: bootmgr: add booting from removable media   Heinrich Schuchardt
• [PATCH v4 10/11] bootmenu: add removable media entries   Heinrich Schuchardt
• Cannot add the EFI Loader to a 64-bit EFI stubbed U-Boot   Heinrich Schuchardt
• Cannot add the EFI Loader to a 64-bit EFI stubbed U-Boot   Heinrich Schuchardt
• [PATCH 1/1] riscv: alloc space exhausted   Heinrich Schuchardt
• [PATCH 1/1] doc: debug UART for RISC-V QEMU virt machine   Heinrich Schuchardt
• [PATCH v2 1/1] riscv: alloc space exhausted   Heinrich Schuchardt
• [PATCH] doc: distro: Update list of all support boot types   Heinrich Schuchardt
• [PATCH 01/11] virtio_ring: Merge identical variables   Heinrich Schuchardt
• [PATCH 08/11] virtio: sandbox: Bind RNG rather than block device   Heinrich Schuchardt
• [PATCH] Convert CONFIG_SKIP_LOWLEVEL_INIT et al to Kconfig   Heinrich Schuchardt
• [PATCH] mkimage: fit: Simplify tmpfile name calculation   Heinrich Schuchardt
• [PATCH] ns16550: Respect CONFIG_BAUDRATE < 0 in _debug_uart_init   Heinrich Schuchardt
• [PATCH 1/2] mkimage: Document misc options   Heinrich Schuchardt
• [PATCH] Fix BMP display when the image stretches beyond border   Heinrich Schuchardt
• [PATCH] cmd: bootefi: restore ability to boot arbitrary blob   Heinrich Schuchardt
• [PATCH v3 14/19] efi_loader: disk: a helper function to create efi_disk objects from udevice   Heinrich Schuchardt
• [PATCH 1/1] binman: don't import deprecated distutils package   Heinrich Schuchardt
• [PATCH v3 11/19] dm: disk: add UCLASS_PARTITION   Heinrich Schuchardt
• Pull request for efi-2022-07-rc1   Heinrich Schuchardt
• [PATCH 1/1] cli: support bracketed paste   Heinrich Schuchardt
• [PATCH 1/1] ARM: renesas: reduce rcar3_salvator-x image size   Heinrich Schuchardt
• [PATCH 1/1] image-fit: don't check free() argument   Heinrich Schuchardt
• [PATCH v2] cmd: bootefi: restore ability to boot arbitrary blob   Heinrich Schuchardt
• [PATCH] doc: update bootefi man-page   Heinrich Schuchardt
• [PATCH 1/1] fs/squashfs: simplify sqfs_read()   Heinrich Schuchardt
• [PATCH 01/11] sandbox: Set the EFI symbols in linker script   Heinrich Schuchardt
• [PATCH v3 11/19] dm: disk: add UCLASS_PARTITION   Heinrich Schuchardt
• [PATCH v4 01/12] dm: tag: change ENOSPC to ENOMEM   Heinrich Schuchardt
• [RFC] disk: don't compile in partition support for spl/tpl if not really necessary   Heinrich Schuchardt
• Pull request for efi-2022-07-rc1-2   Heinrich Schuchardt
• [PATCH v4 00/11] enable menu-driven boot device selection   Heinrich Schuchardt
• [PATCH v4 02/11] lib/charset: add u16_strlcat() function   Heinrich Schuchardt
• [PATCH 1/1] dm: fix formatting of uclass dump   Heinrich Schuchardt
• [PATCH 1/1] drivers: add memory disk support   Heinrich Schuchardt
• [PATCH 1/1] drivers: add memory disk support   Heinrich Schuchardt
• [PATCH 1/1] drivers: add memory disk support   Heinrich Schuchardt
• [PATCH 1/1] drivers: add memory disk support   Heinrich Schuchardt
• [PATCH 1/1] drivers: add memory disk support   Heinrich Schuchardt
• [PATCH 5/7] efi_loader: PARTITION_UUIDS should be optional   Heinrich Schuchardt
• [PATCH 6/7] efi_loader: disk: compile efi_disk when CONFIG_BLK   Heinrich Schuchardt
• [PATCH 6/7] efi_loader: disk: compile efi_disk when CONFIG_BLK   Heinrich Schuchardt
• Pull request for efi-2022-07-rc1-3   Heinrich Schuchardt
• [PATCH] clk: sunxi: h6_r: Correct the driver name   Heinrich Schuchardt
• [PATCH 1/1] cmd: fix long text for fdt command   Heinrich Schuchardt
• [PATCH 1/1] cmd: simplify do_adc_single()   Heinrich Schuchardt
• [PATCH v5 00/12] efi_loader: more tightly integrate UEFI disks to driver model   Heinrich Schuchardt
• [PATCH 1/1] cmd: onenand: fix printf codes   Heinrich Schuchardt
• [PATCH 1/1] cmd: mmc: don't assign unused values   Heinrich Schuchardt
• [PATCH 1/1] efi: fix devpath_is_partition()   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: simplify try_load_entry()   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: simplify efi_add_conventional_memory_map()   Heinrich Schuchardt
• [PATCH v5 00/12] efi_loader: more tightly integrate UEFI disks to driver model   Heinrich Schuchardt
• [PATCH v5 00/12] efi_loader: more tightly integrate UEFI disks to driver model   Heinrich Schuchardt
• [PATCH 1/1] clk: scmi: fix scmi_clk_get_attibute()   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: call efi_init_early() earlier   Heinrich Schuchardt
• [PATCH v5 00/12] efi_loader: more tightly integrate UEFI disks to driver model   Heinrich Schuchardt
• [PATCH v5 00/12] efi_loader: more tightly integrate UEFI disks to driver model   Heinrich Schuchardt
• [PATCH] efi_loader: disk: allow blk devices even without UCLASS_PARTITION   Heinrich Schuchardt
• [PATCH] efi_loader: Select EVENT as well   Heinrich Schuchardt
• [PATCH] efi_loader: Improve console screen clearing and reset   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: BOOTSANDBOX.EFI is not a default file name   Heinrich Schuchardt
• [PATCH v5 00/17] enable menu-driven boot device selection   Heinrich Schuchardt
• [PATCH v5 13/17] efi_loader: menu-driven addition of UEFI boot option   Heinrich Schuchardt
• [PATCH v5 16/17] bootmenu: add removable media entries   Heinrich Schuchardt
• [PATCH v5 00/17] enable menu-driven boot device selection   Heinrich Schuchardt
• [PATCH v5 13/17] efi_loader: menu-driven addition of UEFI boot option   Heinrich Schuchardt
• [PATCH] efi_loader: fix a problem in loading an image from a short-path   Heinrich Schuchardt
• Pull request for efi-2022-07-rc2   Heinrich Schuchardt
• [PATCH v5 06/17] efi_loader: bootmgr: add booting from removable media   Heinrich Schuchardt
• [PATCH] efi_loader: don't call log with __func__ as parameter   Heinrich Schuchardt
• [PATCH v5 01/17] lib/charset: add u16_strlcat() function   Heinrich Schuchardt
• [PATCH v5 04/17] menu: menu_get_choice() return -ENOENT if menu item is empty   Heinrich Schuchardt
• [PATCH v5 07/17] bootmenu: flush input buffer before waiting user key input   Heinrich Schuchardt
• [PATCH v5 08/17] bootmenu: update bootmenu_entry structure   Heinrich Schuchardt
• [PATCH 1/1] doc: fix typos in bootmenu.rst   Heinrich Schuchardt
• [PATCH 1/1] sandbox: raise SANDBOX_RAM_SIZE_MB default to 256   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: reset colors before clearing screen   Heinrich Schuchardt
• [PATCH] test: fix some pylint errors in test_bind.py   Heinrich Schuchardt
• [PATCH 0/2] test: unit test for bootmenu   Heinrich Schuchardt
• [PATCH 1/2] sandbox: enable bootmenu command   Heinrich Schuchardt
• [PATCH 2/2] test: unit test for bootmenu   Heinrich Schuchardt
• [PATCH v5 13/17] efi_loader: menu-driven addition of UEFI boot option   Heinrich Schuchardt
• [PATCH 1/1] tools: mkimage: set OPENSSL_API_COMPAT   Heinrich Schuchardt
• [PATCH 1/1] test: fix some pylint problems in test_capsule_firmware_raw.py   Heinrich Schuchardt
• [PATCH v3] mips: dts: add initial support for ls1c300 SoC   Daniel Schwierzeck
• [PATCH] IOMUX: Fix access past end of console_devices   Andrew Scull
• [PATCH 0/8] Fix misc ASAN reports   Andrew Scull
• [PATCH 1/8] doc: Correct position of gdb '--args' parameter   Andrew Scull
• [PATCH 2/8] acpi: Fix buffer overflow in do_acpi_dump()   Andrew Scull
• [PATCH 3/8] x86: sandbox: Add missing PCI bar to barinfo   Andrew Scull
• [PATCH 4/8] usb: sandbox: Check for string end in copy_to_unicode()   Andrew Scull
• [PATCH 5/8] usb: sandbox: Bounds check read from buffer   Andrew Scull
• [PATCH 6/8] sound: Fix buffer overflow in square wave generation   Andrew Scull
• [PATCH 7/8] test: Fix pointer overrun in dm_test_devm_regmap()   Andrew Scull
• [PATCH 8/8] test: dm: devres: Remove use-after-free   Andrew Scull
• [PATCH 0/8] Fix misc ASAN reports   Andrew Scull
• [PATCH 00/11] Fuzzing and ASAN for sandbox   Andrew Scull
• [PATCH 01/11] sandbox: Set the EFI symbols in linker script   Andrew Scull
• [PATCH 02/11] sandbox: Migrate getopt section to linker list   Andrew Scull
• [PATCH 03/11] linker_lists: Rename sections to remove . prefix   Andrew Scull
• [PATCH 04/11] sandbox: Add support for Address Sanitizer   Andrew Scull
• [PATCH 05/11] fuzzing_engine: Add fuzzing engine uclass   Andrew Scull
• [PATCH 06/11] test: fuzz: Add framework for fuzzing   Andrew Scull
• [PATCH 07/11] sandbox: Decouple program entry from sandbox init   Andrew Scull
• [PATCH 08/11] sandbox: Add libfuzzer integration   Andrew Scull
• [PATCH 09/11] sandbox: Implement fuzzing engine driver   Andrew Scull
• [PATCH 10/11] fuzz: virtio: Add fuzzer for vring   Andrew Scull
• [PATCH 11/11] RFC: Hack dlmalloc to poison memory   Andrew Scull
• [PATCH 10/11] virtio: rng: Check length before copying   Andrew Scull
• [PATCH 08/11] virtio: sandbox: Bind RNG rather than block device   Andrew Scull
• [PATCH 01/11] sandbox: Set the EFI symbols in linker script   Andrew Scull
• [PATCH 04/11] sandbox: Add support for Address Sanitizer   Andrew Scull
• [PATCH 11/11] RFC: Hack dlmalloc to poison memory   Andrew Scull
• [PATCH 11/11] RFC: test: dm: virtio: Test virtio-rng with faked device   Andrew Scull
• [PATCH 10/11] fuzz: virtio: Add fuzzer for vring   Andrew Scull
• [PATCH 00/11] virtio: Harden and test vring   Andrew Scull
• [PATCH v2 13/18] pci: Map bars with offset and length   Andrew Scull
• [PATCH v2 00/12] virtio: Harden and test vring   Andrew Scull
• [PATCH v2 01/12] virtio_ring: Merge identical variables   Andrew Scull
• [PATCH v2 02/12] virtio_ring: Add helper to attach vring descriptor   Andrew Scull
• [PATCH v2 03/12] virtio_ring: Maintain a shadow copy of descriptors   Andrew Scull
• [PATCH v2 04/12] virtio_ring: Check used descriptors are chain heads   Andrew Scull
• [PATCH v2 05/12] dm: test: virtio: Test the virtio ring   Andrew Scull
• [PATCH v2 06/12] virtio: sandbox: Fix device features bitfield   Andrew Scull
• [PATCH v2 07/12] test: dm: virtio: Test notify before del_vqs   Andrew Scull
• [PATCH v2 08/12] test: dm: virtio: Split out virtio device tests   Andrew Scull
• [PATCH v2 09/12] virtio: sandbox: Bind RNG rather than block device   Andrew Scull
• [PATCH v2 10/12] test: dm: virtio: Test virtio device driver probing   Andrew Scull
• [PATCH v2 11/12] virtio: rng: Check length before copying   Andrew Scull
• [PATCH v2 12/12] test: dm: virtio_rng: Test virtio-rng with faked device   Andrew Scull
• [PATCH v2 08/18] pci: Fix use of flags in dm_pci_map_bar()   Andrew Scull
• [PATCH v2 09/18] pci: Add config for Enhanced Allocation   Andrew Scull
• [PATCH v2 12/18] test: pci: Test PCI address conversion functions   Andrew Scull
• [PATCH v2 13/18] pci: Map bars with offset and length   Andrew Scull
• [PATCH v2 15/18] pci: Update dm_pci_bus_to_virt() parameters   Andrew Scull
• [PATCH v2 16/18] pci: Add mask parameter to dm_pci_map_bar()   Andrew Scull
• [PATCH v2 09/18] pci: Add config for Enhanced Allocation   Andrew Scull
• [PATCH v2 09/18] pci: Add config for Enhanced Allocation   Andrew Scull
• [PATCH 09/11] sandbox: Implement fuzzing engine driver   Andrew Scull
• [PATCH 00/11] Fuzzing and ASAN for sandbox   Andrew Scull
• [PATCH v2 01/12] sandbox: Fix EFI runtime symbol placement   Andrew Scull
• [PATCH v2 02/12] sandbox: Rename EFI runtime sections   Andrew Scull
• [PATCH v2 03/12] sandbox: Migrate getopt section to linker list   Andrew Scull
• [PATCH v2 04/12] linker_lists: Rename sections to remove . prefix   Andrew Scull
• [PATCH v2 05/12] sandbox: Add support for Address Sanitizer   Andrew Scull
• [PATCH v2 06/12] fuzzing_engine: Add fuzzing engine uclass   Andrew Scull
• [PATCH v2 07/12] test: fuzz: Add framework for fuzzing   Andrew Scull
• [PATCH v2 08/12] sandbox: Decouple program entry from sandbox init   Andrew Scull
• [PATCH v2 09/12] sandbox: Add libfuzzer integration   Andrew Scull
• [PATCH v2 10/12] sandbox: Implement fuzzing engine driver   Andrew Scull
• [PATCH v2 11/12] fuzz: virtio: Add fuzzer for vring   Andrew Scull
• [PATCH v2 12/12] virtio_ring: Reduce logging noise   Andrew Scull
• [PATCH v3 00/18] virtio: pci: Add and fix consistency checks   Andrew Scull
• [PATCH v3 01/18] virtio: pci: Allow exclusion of legacy driver   Andrew Scull
• [PATCH v3 02/18] virtio: pci: Fix discovery of device config length   Andrew Scull
• [PATCH v3 03/18] virtio: pci: Bounds check device config access   Andrew Scull
• [PATCH v3 04/18] virtio: pci: Bounds check notification writes   Andrew Scull
• [PATCH v3 05/18] virtio: pci: Check virtio common config size   Andrew Scull
• [PATCH v3 06/18] virtio: pci: Check virtio capability is in bounds   Andrew Scull
• [PATCH v3 07/18] virtio: pci: Read entire capability into memory   Andrew Scull
• [PATCH v3 08/18] pci: Fix use of flags in dm_pci_map_bar()   Andrew Scull
• [PATCH v3 09/18] pci: Check region ranges are addressable   Andrew Scull
• [PATCH v3 10/18] pci: Range check address conversions   Andrew Scull
• [PATCH v3 11/18] test: pci: Test PCI address conversion functions   Andrew Scull
• [PATCH v3 12/18] pci: Map bars with offset and length   Andrew Scull
• [PATCH v3 13/18] pci: Match region flags using a mask   Andrew Scull
• [PATCH v3 14/18] pci: Update dm_pci_bus_to_virt() parameters   Andrew Scull
• [PATCH v3 15/18] pci: Add mask parameter to dm_pci_map_bar()   Andrew Scull
• [PATCH v3 16/18] virtio: pci: Check virtio configs are mapped   Andrew Scull
• [PATCH v3 17/18] virtio: pci: Make use of dm_pci_map_bar()   Andrew Scull
• [PATCH v3 18/18] pci: Add config for Enhanced Allocation   Andrew Scull
• [PATCH v2] IOMUX: Fix access past end of console_devices   Andy Shevchenko
• [v2,0/3] Add support for different mediatek pinctrl designs   Sam Shih
• [v2, 1/3] pinctrl: mediatek: rewrite mtk_pinconf_set and related functions   Sam Shih
• [v2,2/3] pinctrl: mediatek: introduce multiple memory bases support   Sam Shih
• [v2, 3/3] pinctrl: mediatek: add support for different types of IO pins   Sam Shih
• [v3,0/3] Add support for different mediatek pinctrl designs   Sam Shih
• [v3, 1/3] pinctrl: mediatek: rewrite mtk_pinconf_set and related functions   Sam Shih
• [v3,2/3] pinctrl: mediatek: introduce multiple memory bases support   Sam Shih
• [v3, 3/3] pinctrl: mediatek: add support for different types of IO pins   Sam Shih
• [PATCH v4 0/3] Add support for different mediatek pinctrl designs   Sam Shih
• [PATCH v4 1/3] pinctrl: mediatek: rewrite mtk_pinconf_set and related functions   Sam Shih
• [PATCH v4 2/3] pinctrl: mediatek: introduce multiple memory bases support   Sam Shih
• [PATCH v4 3/3] pinctrl: mediatek: add support for different types of IO pins   Sam Shih
• [PATCH] ARM: armv7: add non-SPL enable for Cortex SMPEN   Ralph Siemsen
• [PATCH] ARM: armv7: add non-SPL enable for Cortex SMPEN   Ralph Siemsen
• [PATCH] Makefile: update warning about CONFIG_OF_EMBED   Ralph Siemsen
• [PATCH] usb: dwc3: Add missing dependency on DWC3 for DWC3 gadget   Michal Simek
• [PATCH] dm: Use explicit numbers for all enum values   Michal Simek
• [PATCH] xilinx: Increase max size of image from 60 to 100MB   Michal Simek
• [PATCH] clk: zynqmp: Add support for for DP audio/video clocks   Michal Simek
• [PATCH] net: phy: Fix rgmii-id phy reset timeout issue   Michal Simek
• [PATCH] arm64: zynqmp: Record ID code for XCZU1EG device   Michal Simek
• [PATCH] dt-bindings: xilinx: Add missing ids for PD   Michal Simek
• [PATCH 0/6] xilinx: Add support for DM_ETH_PHY   Michal Simek
• [GIT PULL] xilinx patches for v2022.07-rc1 v2   Michal Simek
• [PATCH v6 7/7] fpga: zynqmp: support loading encrypted bitfiles   Michal Simek
• [PATCH v6 6/7] fpga: zynqmp: support loading authenticated images   Michal Simek
• [PATCH v6 3/7] fpga: xilinx: pass an address of xilinx_desc in fpga_desc   Michal Simek
• [PATCH v6 1/7] fpga: add option for loading FPGA secure bitstreams   Michal Simek
• [PATCH v6 2/7] fpga: add fit_fpga_load function   Michal Simek
• [PATCH v6 0/7] fpga: zynqmp: Adding support of loading authenticated images   Michal Simek
• [PATCH V2 1/6] xilinx: versal: board: use CONFIG_COUNTER_FREQUENCY   Michal Simek
• [PATCH] misc: Port USB251xB/xBi Hi-Speed Hub Controller Driver from Linux   Michal Simek
• [PATCH] .mailmap: Start to use new amd.com email address   Michal Simek
• [PATCH] Convert CONFIG_SYS_MEM_TOP_HIDE to Kconfig   Michal Simek
• [PATCH] i2c: ihs: intel: Fix typo in comments (actual)   Michal Simek
• [PATCH] Convert CONFIG_SYS_MEM_TOP_HIDE to Kconfig   Michal Simek
• [PATCH v2] soc: xilinx: versal: fix out of bounds array access   Michal Simek
• [PATCH] soc: xilinx: zynqmp: fix out of bounds array access   Michal Simek
• [PATCH] usb: dwc3: Add missing dependency on DWC3 for DWC3 gadget   Michal Simek
• [PATCH 03/10] microblaze: cache: improve dcache Kconfig options   Michal Simek
• [PATCH 04/10] microblaze: cache: improve icache Kconfig options   Michal Simek
• [PATCH 05/10] microblaze: cache: split flush_cache() function   Michal Simek
• [PATCH 06/10] microblaze: cache: migrate XILINX_DCACHE_BYTE_SIZE to Kconfig   Michal Simek
• [PATCH 08/10] microblaze: cache: introduce flush_dcache_range()   Michal Simek
• [PATCH 07/10] microblaze: cache: introduce flush_cache_all()   Michal Simek
• [PATCH] cpu: 83xx: Add missing dependency on CPU_MPC83XX   Michal Simek
• [PATCH 09/10] cpu: microblaze: add driver for CPU   Michal Simek
• [PATCH 10/10] microblaze: cache: use fdt cache size info if available   Michal Simek
• [PATCH v3 2/2] usb: dwc3: Add support for usb3-phy PHY configuration   Michal Simek
• [PATCH v3 2/2] usb: dwc3: Add support for usb3-phy PHY configuration   Michal Simek
• [PATCH] usb: dwc3: Fix non-usb3 configurations   Michal Simek
• [PATCH] mmc: zynq_sdhci: Add weak function prototype   Michal Simek
• [PATCH] Revert "arm64: xilinx: Set CONFIG_ZYNQMP_FIRMWARE config for mini emmc"   Michal Simek
• [PATCH] xilinx: Handle board_get_usable_ram_top(0) properly   Michal Simek
• [BUG] keyboard doesn't work on Olimex teres-I notebook   Milan P. Stanić
• [RFC PATCH] efi_loader: add sha384/512 on certificate revocation   AKASHI Takahiro
• [PATCH v3 14/19] efi_loader: disk: a helper function to create efi_disk objects from udevice   AKASHI Takahiro
• [PATCH] doc: update bootefi man-page   AKASHI Takahiro
• [PATCH v3 11/19] dm: disk: add UCLASS_PARTITION   AKASHI Takahiro
• [PATCH v6 7/8] mkeficapsule: Remove raw and FIT GUID types   AKASHI Takahiro
• [PATCH v6 8/8] doc: uefi: Update the capsule update related documentation   AKASHI Takahiro
• [PATCH v6 7/8] mkeficapsule: Remove raw and FIT GUID types   AKASHI Takahiro
• [PATCH v6 5/8] test: capsule: Modify the capsule tests to use GUID values for sandbox   AKASHI Takahiro
• [PATCH v6 7/8] mkeficapsule: Remove raw and FIT GUID types   AKASHI Takahiro
• [PATCH v6 8/8] doc: uefi: Update the capsule update related documentation   AKASHI Takahiro
• [PATCH v3 11/19] dm: disk: add UCLASS_PARTITION   AKASHI Takahiro
• [PATCH v7 09/15] disk: Correct the conditions for SPL   AKASHI Takahiro
• [PATCH 1/5] disk: Add an option for partitions in SPL   AKASHI Takahiro
• [PATCH v2 00/20] efi_loader: more tightly integrate UEFI disks to driver model   AKASHI Takahiro
• [PATCH v7 8/8] doc: uefi: Update the capsule update related documentation   AKASHI Takahiro
• [PATCH v7 09/15] disk: Correct the conditions for SPL   AKASHI Takahiro
• [RFC] disk: don't compile in partition support for spl/tpl if not really necessary   AKASHI Takahiro
• [PATCH v4 00/12] efi_loader: more tightly integrate UEFI disks to driver model   AKASHI Takahiro
• [PATCH v4 01/12] dm: tag: change ENOSPC to ENOMEM   AKASHI Takahiro
• [PATCH v4 02/12] dm: tag: add some document   AKASHI Takahiro
• [PATCH v4 03/12] test: dm: add tests for tag support   AKASHI Takahiro
• [PATCH v4 04/12] dm: disk: add UCLASS_PARTITION   AKASHI Takahiro
• [PATCH v4 05/12] dm: blk: add a device-probe hook for scanning disk partitions   AKASHI Takahiro
• [PATCH v4 06/12] efi_loader: split efi_init_obj_list() into two stages   AKASHI Takahiro
• [PATCH v4 07/12] efi_loader: disk: a helper function to create efi_disk objects from udevice   AKASHI Takahiro
• [PATCH v4 08/12] efi_loader: disk: not create BLK device for BLK(IF_TYPE_EFI_LOADER) devices   AKASHI Takahiro
• [PATCH v4 09/12] efi_loader: disk: a helper function to delete efi_disk objects   AKASHI Takahiro
• [PATCH v4 10/12] efi_loader: disk: not delete BLK device for BLK(IF_TYPE_EFI_LOADER) devices   AKASHI Takahiro
• [PATCH v4 11/12] dm: disk: add read/write interfaces with udevice   AKASHI Takahiro
• [PATCH v4 12/12] efi_loader: disk: use udevice instead of blk_desc   AKASHI Takahiro
• [RFC] disk: don't compile in partition support for spl/tpl if not really necessary   AKASHI Takahiro
• [RFC] disk: don't compile in partition support for spl/tpl if not really necessary   AKASHI Takahiro
• [PATCH 0/7] disk: don't compile in partition support for spl/tpl if not really necessary   AKASHI Takahiro
• [PATCH 1/7] disk: include errno.h explicitly in part.h   AKASHI Takahiro
• [PATCH 2/7] disk: enable function prototypes in part.h for SPL/TPL   AKASHI Takahiro
• [PATCH 3/7] disk: define nullified functions for !PARTITIONS   AKASHI Takahiro
• [PATCH 4/7] sandbox: move a function prototype   AKASHI Takahiro
• [PATCH 5/7] efi_loader: PARTITION_UUIDS should be optional   AKASHI Takahiro
• [PATCH 6/7] efi_loader: disk: compile efi_disk when CONFIG_BLK   AKASHI Takahiro
• [PATCH 7/7] disk: don't compile in partition support for spl/tpl if not really necessary   AKASHI Takahiro
• [PATCH v5 00/12] efi_loader: more tightly integrate UEFI disks to driver model   AKASHI Takahiro
• [PATCH v5 01/12] dm: tag: change ENOSPC to ENOMEM   AKASHI Takahiro
• [PATCH v5 02/12] dm: tag: add some document   AKASHI Takahiro
• [PATCH v5 03/12] test: dm: add tests for tag support   AKASHI Takahiro
• [PATCH v5 04/12] dm: disk: add UCLASS_PARTITION   AKASHI Takahiro
• [PATCH v5 05/12] dm: blk: add a device-probe hook for scanning disk partitions   AKASHI Takahiro
• [PATCH v5 06/12] efi_loader: split efi_init_obj_list() into two stages   AKASHI Takahiro
• [PATCH v5 07/12] efi_loader: disk: a helper function to create efi_disk objects from udevice   AKASHI Takahiro
• [PATCH v5 08/12] efi_loader: disk: not create BLK device for BLK(IF_TYPE_EFI_LOADER) devices   AKASHI Takahiro
• [PATCH v5 09/12] efi_loader: disk: a helper function to delete efi_disk objects   AKASHI Takahiro
• [PATCH v5 10/12] efi_loader: disk: not delete BLK device for BLK(IF_TYPE_EFI_LOADER) devices   AKASHI Takahiro
• [PATCH v5 11/12] dm: disk: add read/write interfaces with udevice   AKASHI Takahiro
• [PATCH v5 12/12] efi_loader: disk: use udevice instead of blk_desc   AKASHI Takahiro
• [PATCH 1/2] efi_loader: add sha384/512 on certificate revocation   AKASHI Takahiro
• [PATCH 2/2 v3] test/py: Add more test cases for rejecting an EFI image   AKASHI Takahiro
• [PATCH 3/7] disk: define nullified functions for !PARTITIONS   AKASHI Takahiro
• [PATCH 3/7] disk: define nullified functions for !PARTITIONS   AKASHI Takahiro
• [PATCH 6/7] efi_loader: disk: compile efi_disk when CONFIG_BLK   AKASHI Takahiro
• [PATCH 5/7] efi_loader: PARTITION_UUIDS should be optional   AKASHI Takahiro
• [PATCH] cmd: part: add explicit dependency on PARTITIONS   AKASHI Takahiro
• [PATCH v5 00/12] efi_loader: more tightly integrate UEFI disks to driver model   AKASHI Takahiro
• [PATCH v5 00/12] efi_loader: more tightly integrate UEFI disks to driver model   AKASHI Takahiro
• [PATCH v5 00/12] efi_loader: more tightly integrate UEFI disks to driver model   AKASHI Takahiro
• efi_loader breakage   AKASHI Takahiro
• [PATCH] efi_loader: Select EVENT as well   AKASHI Takahiro
• efi_loader breakage   AKASHI Takahiro
• [PATCH] efi_loader: disk: allow blk devices even without UCLASS_PARTITION   AKASHI Takahiro
• [PATCH] efi_loader: fix a problem in loading an image from a short-path   AKASHI Takahiro
• [PATCH v5 00/12] efi_loader: more tightly integrate UEFI disks to driver model   AKASHI Takahiro
• [PATCH] mtd: spi: Add ISSI QSPI to lightweight SPI flash stack for spl   Jagan Teki
• [PATCH 1/2] sf: dataflash: add support for "extended ID"   Jagan Teki
• [ANN] U-Boot v2022.07-rc1 released   Jagan Teki
• fs: ext4: File system errors after writing to ext4 partition   Christian Theiss
• [PATCH] imx: add i.MX8MN DDR3L evk board support   Heiko Thiery
• [PATCH v2] imx: add i.MX8MN DDR3L evk board support   Heiko Thiery
• [PATCH] imx: add i.MX8MN DDR3L evk board support   Heiko Thiery
• [PATCH v3] imx: add i.MX8MN DDR3L evk board support   Heiko Thiery
• [PATCH] ns16550: Respect CONFIG_BAUDRATE < 0 in _debug_uart_init   Joakim Tjernlund
• [PATCH V4 6/6] arm: set cntfrq_el0 if CONFIG_COUNTER_FREQUENCY is valid   Philipp Tomsich
• [PATCH 10/11] virtio: rng: Check length before copying   Pierre-Clément Tosi
• [PATCH] Make ci_udc available in SPL   Manuel Traut
• [PATCH] board: bsh: imx8mn_bsh_smm_s2/s2pro: enable DM_SERIAL   Michael Trimarchi
• [PATCH V2] board: bsh: imx8mn_bsh_smm_s2/s2pro: enable DM_SERIAL   Michael Trimarchi
• [PATCH V3] board: bsh: imx8mn_bsh_smm_s2/s2pro: enable DM_SERIAL   Michael Trimarchi
• [RFC PATCH] arm: mach-imx: cmd_nandbcb fix bad block handling   Michael Trimarchi
• [PATCH 0/2] MXS nand fixes in SPL   Michael Trimarchi
• [PATCH 1/2] nand: raw: mxs_nand: Fix specific hook registration   Michael Trimarchi
• [PATCH 2/2] mtd: nand: mxs_nand_spl: Fix bad block skipping   Michael Trimarchi
• [RFC PATCH] spl: spl_nand: Fix bad block handling in fitImage   Michael Trimarchi
• [PATCH V2 0/4] MXS nand fixes in SPL   Michael Trimarchi
• [PATCH V2 1/4] nand: raw: mxs_nand: Fix specific hook registration   Michael Trimarchi
• [PATCH V2 2/4] mtd: nand: mxs_nand_spl: Fix bad block skipping   Michael Trimarchi
• [PATCH V2 3/4] arm: mach-imx: cmd_nandbcb fix bad block handling   Michael Trimarchi
• [PATCH 4/4] spl: spl_nand: Fix bad block handling in fitImage   Michael Trimarchi
• The contradictory nature of spl_nand_fit_read   Michael Nazzareno Trimarchi
• [PATCH] Kconfig: Fix SYS_MALLOC_F_LEN for i.MX8MQ   Michael Nazzareno Trimarchi
• [PATCH v2] board: gateworks: venice: enable DM_SERIAL   Michael Nazzareno Trimarchi
• [PATCH v2] board: gateworks: venice: enable DM_SERIAL   Michael Nazzareno Trimarchi
• [PATCH 1/2] common: fdt: Add a function for reserving memory without kernel linear mapping   Michael Nazzareno Trimarchi
• [PATCH v3] board: gateworks: venice: enable DM_SERIAL   Michael Nazzareno Trimarchi
• [PATCH v3] board: gateworks: venice: enable DM_SERIAL   Michael Nazzareno Trimarchi
• [PATCH v3] board: gateworks: venice: enable DM_SERIAL   Michael Nazzareno Trimarchi
• im8mn: Loading U-Boot via serial download mode   Michael Nazzareno Trimarchi
• im8mn: Loading U-Boot via serial download mode   Michael Nazzareno Trimarchi
• imx8mm eLCDIF clock   Michael Nazzareno Trimarchi
• [PATCH V3] board: bsh: imx8mn_bsh_smm_s2/s2pro: enable DM_SERIAL   Michael Nazzareno Trimarchi
• [PATCH 2/2] imx8mn/8mp: Select ENV_IS_NOWHERE   Michael Nazzareno Trimarchi
• [PATCH 2/2] imx8mn/8mp: Select ENV_IS_NOWHERE   Michael Nazzareno Trimarchi
• [PATCH 2/2] imx8mn/8mp: Select ENV_IS_NOWHERE   Michael Nazzareno Trimarchi
• [PATCH 2/2] imx8mn/8mp: Select ENV_IS_NOWHERE   Michael Nazzareno Trimarchi
• [PATCH 2/2] mtd: nand: mxs_nand_spl: Fix bad block skipping   Michael Nazzareno Trimarchi
• [PATCH v3 2/2] imx8mn/8mp: Allow booting via USB   Michael Nazzareno Trimarchi
• [ANN] U-Boot v2022.07-rc1 released   Michael Nazzareno Trimarchi
• [PATCH V2 2/4] mtd: nand: mxs_nand_spl: Fix bad block skipping   Michael Nazzareno Trimarchi
• root access and u-boot-test-hooks scripts   Michael Nazzareno Trimarchi
• [PATCH 11/15] imx: imx8mn_bsh_smm_s2: drop CONFIG_MXC_UART_BASE   Michael Nazzareno Trimarchi
• [PATCH] gpio: aspeed: Fix incorrect offset of read back register.   Billy Tsai
• [PATCH] pwm: aspeed: Select SYSCON to get parent detail.   Billy Tsai
• [PATCH] LS1043ARDB, LS1046ARDB, LS1088ARDB: Enable SPL_OF_CONTROL in SECURE Boot defconfig   Kshitiz Varshney
• [PATCH] power_domain: Add power_domain_get_by_name()   Marek Vasut
• [PATCH] imx: power-domain: Add i.MX8MP support   Marek Vasut
• [PATCH] imx: power-domain: Add i.MX8MP HSIOMIX driver   Marek Vasut
• [PATCH] clk: imx8mp: Fill in DWC3 USB, USB PHY, HSIOMIX clock   Marek Vasut
• [PATCH] phy: phy-imx8mq-usb: Add support for i.MX8MP USB PHY   Marek Vasut
• [PATCH v2] imx: power-domain: Add i.MX8MP HSIOMIX driver   Marek Vasut
• [PATCH v2] clk: imx8mp: Fill in DWC3 USB, USB PHY, HSIOMIX clock   Marek Vasut
• [PATCH 1/2] usb: dwc3: Rename .select_dr_mode to .glue_configure   Marek Vasut
• [PATCH 2/2] usb: dwc3: Implement .glue_configure for i.MX8MP   Marek Vasut
• [PATCH] arm: dts: imx8mp: Import GPCv2 subset, HSIOMIX and USB PD   Marek Vasut
• [PATCH 2/2] usb: dwc3: Implement .glue_configure for i.MX8MP   Marek Vasut
• [PATCH] ARM: imx: Enable instruction cache early on on i.MX8M   Marek Vasut
• [PATCH] env: Fix avoid using a leftover text-environment file   Marek Vasut
• [PATCH 1/6] led: Move OF "label" property parsing to core   Marek Vasut
• [PATCH 2/6] led: bcm6328: Drop duplicate OF "label" property parsing   Marek Vasut
• [PATCH 3/6] led: bcm6358: Drop duplicate OF "label" property parsing   Marek Vasut
• [PATCH 4/6] led: bcm6858: Drop duplicate OF "label" property parsing   Marek Vasut
• [PATCH 5/6] led: cortina: Drop duplicate OF "label" property parsing   Marek Vasut
• [PATCH 6/6] led: gpio: Drop duplicate OF "label" property parsing   Marek Vasut
• [PATCH] led: Configure LED default-state on boot   Marek Vasut
• [PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency   Marek Vasut
• [RFC PATCH 2/3] mx6: ddr: Wait before issuing the first MRS cmd   Marek Vasut
• [RFC PATCH 1/3] mx6: ddr: Restore ralat/walat in write level calibration   Marek Vasut
• [PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency   Marek Vasut
• [PATCH 2/2] usb: dwc3: Implement .glue_configure for i.MX8MP   Marek Vasut
• [RFC PATCH 2/3] mx6: ddr: Wait before issuing the first MRS cmd   Marek Vasut
• [PATCH 2/2] usb: dwc3: Implement .glue_configure for i.MX8MP   Marek Vasut
• [RFC PATCH 2/3] mx6: ddr: Wait before issuing the first MRS cmd   Marek Vasut
• [PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency   Marek Vasut
• [PATCH 1/3] env: Implement lower priority arch_env_get_location()   Marek Vasut
• [PATCH 2/3] armv8: layerscape: env: Switch to arch_env_get_location()   Marek Vasut
• [PATCH 3/3] ARM: imx: imx8m: env: Switch to arch_env_get_location()   Marek Vasut
• [PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency   Marek Vasut
• [PATCH] imx: power-domain: Add i.MX8MP support   Marek Vasut
• [PATCH] mtd: spi-nor-ids: Add Winbond W25Q128JW ID   Marek Vasut
• [PATCH v2] image: fdt: Fix DT relocation handling with multiple DRAM banks with gap   Marek Vasut
• [PATCH 1/2] ARM: imx8mm: verdin-imx8mm: Rework board_early_init()   Marek Vasut
• [PATCH 2/2] ARM: dts: imx8mm: Add i.MX8M Mini Toradex Verdin based Menlo board   Marek Vasut
• [PATCH] misc: Port USB251xB/xBi Hi-Speed Hub Controller Driver from Linux   Marek Vasut
• [PATCH] Revert "env: Load env when ENV_IS_NOWHERE is only location selected"   Marek Vasut
• [PATCH] Revert "env: Load env when ENV_IS_NOWHERE is only location selected"   Marek Vasut
• [PATCH 01/16] net: dm9000: Make accessor names lowercase   Marek Vasut
• [PATCH 02/16] net: dm9000: Replace DM9000_DBG() with debug()   Marek Vasut
• [PATCH 03/16] net: dm9000: Make RxLen and RxStatus lowercase   Marek Vasut
• [PATCH 04/16] net: dm9000: Drop unused dump_regs()   Marek Vasut
• [PATCH 05/16] net: dm9000: Turn DM9000_DMP_PACKET() into a function   Marek Vasut
• [PATCH 06/16] net: dm9000: Drop volatiles   Marek Vasut
• [PATCH 07/16] net: dm9000: Checkpatch cleanup   Marek Vasut
• [PATCH 08/16] net: dm9000: Reorder and staticize   Marek Vasut
• [PATCH 09/16] net: dm9000: Rename board_info to dm9000_priv   Marek Vasut
• [PATCH 10/16] net: dm9000: Drop static device private data   Marek Vasut
• [PATCH 11/16] net: dm9000: Drop dm9000.h and staticize SROM access   Marek Vasut
• [PATCH 12/16] net: dm9000: Pass private data around for IO   Marek Vasut
• [PATCH 13/16] net: dm9000: Split non-DM specific bits from common code   Marek Vasut
• [PATCH 14/16] net: dm9000: Receive one packet per recv call   Marek Vasut
• [PATCH 15/16] net: dm9000: Add DM support   Marek Vasut
• [PATCH 16/16] net: dm9000: Add Kconfig entry   Marek Vasut
• [PATCH v3] ARM: dts: imx: Add support for Data Modul i.MX8M Mini eDM SBC   Marek Vasut
• [PATCH] arm: dts: imx8mp: Import GPCv2 subset, HSIOMIX and USB PD   Marek Vasut
• [PATCH v2 01/23] mmc: fsl_esdhc_imx: Add i.MX8MP compatible string   Marek Vasut
• [PATCH v2 02/23] ARM: dts: net: dwc_eth_qos: Fix i.MX8MP compatible string   Marek Vasut
• [PATCH v2 03/23] ARM: imx: imx8m: Add 933 MHz PLL settings   Marek Vasut
• [PATCH v2 04/23] imx8m: ddrphy_utils: Add 3732 MT/s mode   Marek Vasut
• [PATCH v2 05/23] pmic: pca9450: Add PCA9450C compatible string   Marek Vasut
• [PATCH v2 06/23] pmic: pca9450: Add upstream regulators subnode match   Marek Vasut
• [PATCH v2 07/23] pmic: pca9450: Add regulator driver   Marek Vasut
• [PATCH v2 08/23] spi: nxp_fspi: Add i.MX8MP compatible string   Marek Vasut
• [PATCH v2 09/23] ARM: dts: imx: Add flexspi node to i.MX8MP   Marek Vasut
• [PATCH v2 10/23] ARM: imx: Decode ECSPI env location from i.MX8M ROMAPI tables   Marek Vasut
• [PATCH v2 11/23] ARM: imx: Get rid of only i.MX8M SMCCC arch call   Marek Vasut
• [PATCH v2 12/23] power-domain: Return 0 if ops unimplemented and remove empty functions   Marek Vasut
• [PATCH v2 13/23] imx: power-domain: Descend into pgc subnode if present   Marek Vasut
• [PATCH v2 14/23] imx: power-domain: Inline arch-imx8m/power-domain.h   Marek Vasut
• [PATCH v2 15/23] imx: power-domain: Get rid of SMCCC dependency   Marek Vasut
• [PATCH v2 16/23] power_domain: Add power_domain_get_by_name()   Marek Vasut
• [PATCH v2 17/23] imx: power-domain: Add i.MX8MP support   Marek Vasut
• [PATCH v3 18/23] imx: power-domain: Add i.MX8MP HSIOMIX driver   Marek Vasut
• [PATCH v3 19/23] clk: imx8mp: Fill in DWC3 USB, USB PHY, HSIOMIX clock   Marek Vasut
• [PATCH v2 20/23] phy: phy-imx8mq-usb: Add support for i.MX8MP USB PHY   Marek Vasut
• [PATCH v2 21/23] usb: dwc3: Rename .select_dr_mode to .glue_configure   Marek Vasut
• [PATCH v2 22/23] usb: dwc3: Implement .glue_configure for i.MX8MP   Marek Vasut
• [PATCH v2 23/23] arm: dts: imx8mp: Import GPCv2 subset, HSIOMIX and USB PD   Marek Vasut
• [PATCH] arm: dts: imx8mp: Import GPCv2 subset, HSIOMIX and USB PD   Marek Vasut
• [PATCH] arm: dts: imx8mp: Import GPCv2 subset, HSIOMIX and USB PD   Marek Vasut
• [PATCH] ARM: imx8mm: verdin-imx8mm: Drop superfluous header   Marek Vasut
• [PATCH v4] ARM: dts: imx: Add support for Data Modul i.MX8M Mini eDM SBC   Marek Vasut
• [PATCH v3 1/2] pmic: pca9450: Add upstream regulators subnode match   Marek Vasut
• [PATCH v3 2/2] pmic: pca9450: Add regulator driver   Marek Vasut
• [PATCH v3] ARM: imx: Get rid of only i.MX8M SMCCC arch call   Marek Vasut
• [PATCH] clk: imx8mp: Fix 24M and 32k clock   Marek Vasut
• [PATCH v2] ARM: imx: Enable instruction cache early on on i.MX8M   Marek Vasut
• [PATCH v4 01/10] power-domain: Return 0 if ops unimplemented and remove empty functions   Marek Vasut
• [PATCH v4 02/10] imx: power-domain: Descend into pgc subnode if present   Marek Vasut
• [PATCH v4 03/10] imx: power-domain: Inline arch-imx8m/power-domain.h   Marek Vasut
• [PATCH v4 04/10] imx: power-domain: Get rid of SMCCC dependency   Marek Vasut
• [PATCH v4 05/10] power_domain: Add power_domain_get_by_name()   Marek Vasut
• [PATCH v4 06/10] imx: power-domain: Add i.MX8MP support   Marek Vasut
• [PATCH v4 07/10] imx: power-domain: Add i.MX8MP HSIOMIX driver   Marek Vasut
• [PATCH v4 08/10] usb: dwc3: Rename .select_dr_mode to .glue_configure   Marek Vasut
• [PATCH v4 09/10] usb: dwc3: Implement .glue_configure for i.MX8MP   Marek Vasut
• [PATCH v4 10/10] arm: dts: imx8mp: Import GPCv2 subset, HSIOMIX and USB PD   Marek Vasut
• [PATCH] Revert "env: Load env when ENV_IS_NOWHERE is only location selected"   Marek Vasut
• [PATCH v2 01/17] net: dm9000: Make accessor names lowercase   Marek Vasut
• [PATCH v2 02/17] net: dm9000: Replace DM9000_DBG() with debug()   Marek Vasut
• [PATCH v2 03/17] net: dm9000: Make RxLen and RxStatus lowercase   Marek Vasut
• [PATCH v2 04/17] net: dm9000: Drop unused dump_regs()   Marek Vasut
• [PATCH v2 05/17] net: dm9000: Turn DM9000_DMP_PACKET() into a function   Marek Vasut
• [PATCH v2 06/17] net: dm9000: Drop volatiles   Marek Vasut
• [PATCH v2 07/17] net: dm9000: Checkpatch cleanup   Marek Vasut
• [PATCH v2 08/17] net: dm9000: Reorder and staticize   Marek Vasut
• [PATCH v2 09/17] net: dm9000: Rename board_info to dm9000_priv   Marek Vasut
• [PATCH v2 10/17] net: dm9000: Drop static device private data   Marek Vasut
• [PATCH v2 11/17] net: dm9000: Drop dm9000.h and staticize SROM access   Marek Vasut
• [PATCH v2 12/17] net: dm9000: Pass private data around for IO   Marek Vasut
• [PATCH v2 13/17] net: dm9000: Split non-DM specific bits from common code   Marek Vasut
• [PATCH v2 14/17] net: dm9000: Receive one packet per recv call   Marek Vasut
• [PATCH v2 15/17] net: dm9000: Add DM support   Marek Vasut
• [PATCH v2 16/17] net: dm9000: Add Kconfig entry   Marek Vasut
• [PATCH v2 17/17] configs: net: dm9000: Move new Kconfig option to board configs   Marek Vasut
• [PATCH] cmd: adc: Add support for storing ADC result in env variable   Marek Vasut
• [PATCH] ram: stm32mp1: Conditionally enable ASR   Marek Vasut
• [PATCH] misc: Port USB251xB/xBi Hi-Speed Hub Controller Driver from Linux   Marek Vasut
• Pull request: u-boot-imx u-boot-imx-20220412   Marek Vasut
• [PATCH] stm32mp: psci: Retain PLL3CR, PLL4CR, RCC_MSSCKSELR across suspend   Marek Vasut
• [PATCH] ARM: imx: imx8m: Fix board_get_usable_ram_top()   Marek Vasut
• [PATCH] ram: stm32mp1: Conditionally enable ASR   Marek Vasut
• [PATCH v2] cmd: adc: Add support for storing ADC result in env variable   Marek Vasut
• [PATCH] ram: stm32mp1: Conditionally enable ASR   Marek Vasut
• [PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency   Marek Vasut
• [PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency   Marek Vasut
• [PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency   Marek Vasut
• [PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency   Marek Vasut
• [PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency   Marek Vasut
• [PATCH] arm: imx8m: Enable CLK_IMX8M[MNQP] where applicable   Marek Vasut
• [PATCH 2/2] imx8mn/8mp: Select ENV_IS_NOWHERE   Marek Vasut
• [PATCH 2/2] imx8mn/8mp: Select ENV_IS_NOWHERE   Marek Vasut
• im8mn: Loading U-Boot via serial download mode   Marek Vasut
• imx8mm eLCDIF clock   Marek Vasut
• imx8mm eLCDIF clock   Marek Vasut
• [PATCH] spl_imx_romapi: Remove extraneous character   Marek Vasut
• [PATCH 2/2] imx8mn/8mp: Select ENV_IS_NOWHERE   Marek Vasut
• [PATCH] led: Configure LED default-state on boot   Marek Vasut
• [PATCH v2 2/2] imx8mn/8mp: Allow booting via USB   Marek Vasut
• [PATCH] ARM: dts: imx: Use 100 kHz I2C2 on Data Modul i.MX8M Mini eDM SBC   Marek Vasut
• [PATCH] led: Configure LED default-state on boot   Marek Vasut
• [PATCH] clk: stm32mp1: Add missing newline   Marek Vasut
• [PATCH] led: Configure LED default-state on boot   Marek Vasut
• [PATCH] led: Configure LED default-state on boot   Marek Vasut
• [PATCH 1/3] dm: core: Add DM_FLAG_PROBE_AFTER_BIND flag   Marek Vasut
• [PATCH 2/3] led: Mark device instance with DM_FLAG_PROBE_AFTER_BIND   Marek Vasut
• [PATCH 3/3] led: gpio: Check device compatible string to determine the top level node   Marek Vasut
• [PULL] u-boot-usb/master   Marek Vasut
• [PATCH] led: gpio: Use NOP uclass driver for top-level node   Marek Vasut
• [PATCH] led: Drop led_default_state()   Marek Vasut
• [PATCH 1/3] dm: core: Add DM_FLAG_PROBE_AFTER_BIND flag   Marek Vasut
• [PATCH] led: Configure LED default-state on boot   Marek Vasut
• [PATCH 1/3] dm: core: Add DM_FLAG_PROBE_AFTER_BIND flag   Marek Vasut
• [PATCH 1/3] dm: core: Add DM_FLAG_PROBE_AFTER_BIND flag   Marek Vasut
• [PATCH][RESEND] mtd: spi-nor-ids: Add Winbond W25Q128JW ID   Marek Vasut
• [PATCH v2 1/2] pmic: pca9450: Add upstream regulators subnode match   Marek Vasut
• [PATCH v2 2/2] pmic: pca9450: Add regulator driver   Marek Vasut
• [PATCH] ARM: imx: imx8q: Use LPUART_BASE macro in config files   Marek Vasut
• [PATCH 1/4] ARM: imx: imx8m: Introduce and use UART_BASE_ADDR(n)   Marek Vasut
• [PATCH 2/4] ARM: imx: imx27: Introduce and use UART_BASE_ADDR(n)   Marek Vasut
• [PATCH 3/4] ARM: imx: imx31: Introduce and use UART_BASE_ADDR(n)   Marek Vasut
• [PATCH 4/4] ARM: imx: imx5: Introduce and use UART_BASE_ADDR(n)   Marek Vasut
• [PATCH 1/4] ARM: imx: imx8m: Introduce and use UART_BASE_ADDR(n)   Marek Vasut
• [PATCH 1/4] ARM: imx: imx8m: Introduce and use UART_BASE_ADDR(n)   Marek Vasut
• [PATCH 1/2] test: dm: led: Fix LED enumeration   Marek Vasut
• [PATCH 2/2] test: dm: pinmux: Get LED2 udevice in the pinmux test   Marek Vasut
• [PATCH 2/3] led: Mark device instance with DM_FLAG_PROBE_AFTER_BIND   Marek Vasut
• [PATCH] net: dm9000: Correctly handle empty FIFO   Marek Vasut
• [PATCH 1/1] cmd: simplify do_adc_single()   Marek Vasut
• [PATCH] ARM: dts: imx: Use 100 kHz I2C2 on Data Modul i.MX8M Mini eDM SBC   Marek Vasut
• [PATCH v2] ram: stm32mp1: Conditionally enable ASR   Marek Vasut
• [PATCH v2] stm32mp: psci: Retain MCUDIVR, PLL3CR, PLL4CR, MSSCKSELR across suspend   Marek Vasut
• [PATCH] power: domain: apple: Restore reset ops that return 0   Marek Vasut
• [PATCH] power: domain: apple: Restore reset ops that return 0   Marek Vasut
• [PATCH] reset: Return 0 if ops unimplemented and remove empty functions   Marek Vasut
• [PATCH] power: domain: apple: Restore reset ops that return 0   Marek Vasut
• [PATCH v1] ARM: dts: imx: Fix iMX6QDL DHCOM PDK2 DTC Warnings   Marek Vasut
• [PATCH v1] ARM: dts: imx: Fix iMX6QDL DHCOM PDK2 DTC Warnings   Marek Vasut
• [PATCH v1] ARM: dts: imx: Fix iMX6QDL DHCOM PDK2 DTC Warnings   Marek Vasut
• [PATCH 03/15] imx: imx8mm_mx8menlo: Enable DM_SERIAL   Marek Vasut
• [PATCH 03/15] imx: imx8mm_mx8menlo: Enable DM_SERIAL   Marek Vasut
• [PATCH] imx8m: fix reading of DDR4 MR registers   Rasmus Villemoes
• [PATCH] misc: i2c_eeprom: fix at24c32 offset_len   Rasmus Villemoes
• please modify output of i.MX8MSCALE DDR Tool   Rasmus Villemoes
• [PATCH 1/5] clk: meson: add minimal driver for axg-ao clocks   Vyacheslav
• [PATCH v2 1/6] clk: meson: add minimal driver for axg-ao clocks   Vyacheslav
• [PATCH v2 5/6] board: amlogic: jethub j100: enable saradc in dts   Vyacheslav
• [PATCH v3 0/6] meson: add clk and adc support for JetHub D1 (j100)   Vyacheslav
• [PATCH] armv8: sec_firmware: drop unneeded ARMV8_SEC_FIRMWARE_SUPPORT check   Michael Walle
• [PATCH] armv8: sec_firmware: drop unneeded ARMV8_SEC_FIRMWARE_SUPPORT check   Michael Walle
• [PATCH 1/2] usb: dwc3: core: Fix warnings when building without driver model   Michael Walle
• [PATCH 2/2] arch: layerscape: Add SFP binding   Michael Walle
• [PATCH 2/2] arch: layerscape: Add SFP binding   Michael Walle
• possible off-by-one error on month counting in rtc rv8803 driver   Michael Walle
• [PATCH v1] rtc: rv8803: fix off-by-one in month counting   Michael Walle
• [PATCH 2/2] arm: layerscape: Disable erratum A009007 on LS1021A, LS1043A, and LS1046A   Ran Wang
• [PATCH] btrfs: Fix compilation on big endian systems   Qu Wenruo
• Handle unaligned read at fs layer?   Qu Wenruo
• [PATCH] Fix BMP display when the image stretches beyond border   Vitaly Wool
• [PATCH 1/9] net: gmac_rockchip: Fix misuse of GENMASK macro   David Wu
• [PATCH V2 2/4] mtd: nand: mxs_nand_spl: Fix bad block skipping   Han Xu
• [v2 13/25] spi: cadence_qspi: Migrate CONFIG_CQSPI_REF_CLK to Kconfig   Pratyush Yadav
• [PATCH 6/8] spi-mem: Add dirmap API from Linux   Pratyush Yadav
• [PATCH 7/8] mtd: spi-nor: use spi-mem dirmap API   Pratyush Yadav
• [PATCH v4 01/12] rockchip: move ROCKCHIP_STIMER_BASE to Kconfig   Kever Yang
• [PATCH v4 02/12] rockchip: spl: change call condition rockchip_stimer_init()   Kever Yang
• [PATCH v4 03/12] rockchip: tpl: change call condition rockchip_stimer_init()   Kever Yang
• [PATCH v4 04/12] rockchip: spl: replace ifdef by IS_ENABLED for timer_init() call condition   Kever Yang
• [PATCH v4 05/12] rockchip: tpl: use IS_ENABLED for timer_init() call condition   Kever Yang
• [PATCH v4 06/12] rockchip: timer: add OF_PLATDATA support for dw-apb-timer   Kever Yang
• [PATCH v4 07/12] rockchip: timer: dw-apb-timer: fix whitespace in U_BOOT_DRIVER structure   Kever Yang
• [PATCH v4 08/12] rockchip: mmc: rockchip_dw_mmc: fix ciu clock index   Kever Yang
• [PATCH v4 09/12] rockchip: mmc: rockchip_dw_mmc: add rk3066/rk3188 support   Kever Yang
• [PATCH v4 10/12] rockchip: serial: restyle the serial_rockchip.c driver   Kever Yang
• [PATCH v4 11/12] rockchip: serial: move driver alias to serial_rockchip.c   Kever Yang
• [PATCH v4 12/12] rockchip: serial: Kconfig: add select SYS_NS16550 to config ROCKCHIP_SERIAL   Kever Yang
• [PATCH v9 01/16] rockchip: rk3066-power: sync power domain dt-binding header from Linux   Kever Yang
• [PATCH 1/9] net: gmac_rockchip: Fix misuse of GENMASK macro   Kever Yang
• Radxa rock-pi-3a   Kever Yang
• [PATCH 1/2] rockchip: Enable SCSI in distro bootcmd for rk3399.   Kever Yang
• [PATCH 2/2] rockchip: Enable AHCI/SCSI/SATA on rockpro64-rk3399.   Kever Yang
• [PATCH v9 02/16] rockchip: rk3066: add grf header file   Kever Yang
• [PATCH v9 03/16] rockchip: rk3066: add clock driver for rk3066 soc   Kever Yang
• [PATCH v9 04/16] rockchip: rk3066: add rk3066 pinctrl driver   Kever Yang
• [PATCH v9 05/16] rockchip: rk3066: add sdram driver   Kever Yang
• [PATCH v9 06/16] arm: dts: rockchip: fix rk3xxx-u-boot.dtsi   Kever Yang
• [PATCH v9 07/16] arm: dts: rockchip: fix include rk3xxx-u-boot.dtsi   Kever Yang
• [PATCH v9 08/16] arm: dts: rockchip: add rk3066a.dtsi   Kever Yang
• [PATCH v9 09/16] arm: dts: rockchip: add rk3066a-mk808.dts   Kever Yang
• [PATCH v9 12/16] rockchip: rk3066: add core support   Kever Yang
• [PATCH v9 15/16] rockchip: tools: add rk3066 support to rkcommon.c   Kever Yang
• [PATCH v9 13/16] rockchip: rk3066: add Rikomagic MK808 board   Kever Yang
• [PATCH v9 14/16] rockchip: rk3066: add mk808_defconfig   Kever Yang
• [PATCH v9 16/16] doc: rockchip: add rk3066 Rikomagic MK808   Kever Yang
• [PATCH v4 09/12] rockchip: mmc: rockchip_dw_mmc: add rk3066/rk3188 support   Kever Yang
• [PATCH v5 02/13] rockchip: spl: change call condition rockchip_stimer_init()   Kever Yang
• [PATCH v5 03/13] rockchip: tpl: change call condition rockchip_stimer_init()   Kever Yang
• [PATCH v5 08/13] rockchip: mmc: rockchip_dw_mmc: add rk3066/rk3188 support   Kever Yang
• [PATCH v5 11/13] rockchip: serial: rename U_BOOT_DRIVER name to rockchip_uart   Kever Yang
• [PATCH v5 13/13] rockchip: serial: Kconfig: allow ROCKCHIP_SERIAL enabled in TPL   Kever Yang
• [PATCH v9 16/16] doc: rockchip: add rk3066 Rikomagic MK808   Kever Yang
• [PATCH v10 11/16] rockchip: rk3066: add core support   Kever Yang
• [PATCH v10 14/16] doc: rockchip: restyle rockchip.rst   Kever Yang
• [PATCH v10 15/16] doc: rockchip: add px30/rk3326 boards and examples   Kever Yang
• [PATCH v10 16/16] doc: rockchip: add rk3066 Rikomagic MK808   Kever Yang
• [PATCH v3 09/12] arm: dts: rockchip: sync rk3288.dtsi from Linux   Kever Yang
• [PATCH v10 11/16] rockchip: rk3066: add core support   Kever Yang
• [PATCH v4 04/14] arm: dts: rockchip: sync rk322x.dtsi from Linux   Kever Yang
• [PATCH v4 05/14] arm: dts: rockchip: sync rk3229-evb.dts from Linux   Kever Yang
• [PATCH v4 09/14] arm: dts: rockchip: sync rk3288.dtsi from Linux   Kever Yang
• [PATCH v4 13/14] board: google: veyron: add more DT files to MAINTAINERS   Kever Yang
• [PATCH v4 14/14] board: rk3288: add more DT files to MAINTAINERS   Kever Yang
• [PATCH v1] rockchip: video: rk_edp: add more rk3288 edp node options   Kever Yang
• [PATCH v1] rockchip: video: mipi: add more compatible strings for rk3288/rk3399   Kever Yang
• Pull request: u-boot-rockchip-20220418   Kever Yang
• [PATCH v11 00/16] Add Rikomagic MK808 board   Kever Yang
• [PATCH v4 01/14] rockchip: rk3228-power: sync power domain dt-binding header from Linux   Kever Yang
• [PATCH 4/5] phycore-rk3288: Avoid enabling partition support in SPL   Kever Yang
• [PATCH] rockchip: include: configs: remove unused configs for tag and size   Kever Yang
• [PATCH 0/5] patman: test_util: Prettify test report outputs for python tools   Alper Nebi Yasak
• [PATCH 1/5] patman: test_util: Fix printing results for failed tests   Alper Nebi Yasak
• [PATCH 2/5] patman: test_util: Handle nonexistent tests while loading tests   Alper Nebi Yasak
• [PATCH 3/5] patman: test_util: Use unittest text runner to print test results   Alper Nebi Yasak
• [PATCH 4/5] patman: test_util: Customize unittest test results for more info   Alper Nebi Yasak
• [PATCH 5/5] patman: test_util: Print test stdout/stderr within test summaries   Alper Nebi Yasak
• [PATCH] dtoc: Update fdt tests to use test_util   Alper Nebi Yasak
• [PATCH 1/3] binman: add sign option for binman   Alper Nebi Yasak
• [PATCH 1/3] binman: add sign option for binman   Alper Nebi Yasak
• [PATCH 1/1] binman: don't import deprecated distutils package   Alper Nebi Yasak
• [PATCH 3/3] binman: add test for sign option   Alper Nebi Yasak
• binman and faked blobs failures   Alper Nebi Yasak
• [RESEND, RFC 1/8] tools: config: yaml: Add board config class to generate config binaries   Alper Nebi Yasak
• [RESEND, RFC 2/8] binman: etype: sysfw: Add entry type for sysfw   Alper Nebi Yasak
• [RESEND, RFC 5/8] binman: sysfw: Add support for packaging tiboot3.bin and sysfw.itb   Alper Nebi Yasak
• [RESEND, RFC 6/8] binman: dtsi: sysfw: j721e: Use binman to package sysfw.itb   Alper Nebi Yasak
• [RESEND, RFC 7/8] binman: etype: dm: Add entry type for TI DM   Alper Nebi Yasak
• [RESEND, RFC 8/8] binman: dtsi: tispl: j721e: Use binman to package tispl.bin   Alper Nebi Yasak
• [PATCH] MAINTAINERS: Add Alper as a binman maintainer   Alper Nebi Yasak
• [PATCH 7/7] binman: Refuse to replace sections for now   Alper Nebi Yasak
• [PATCH] patman: Fix defaults not propegating to subparsers   Alper Nebi Yasak
• [PATCH v4] board: purism: add the Purism Librem5 phone   Alper Nebi Yasak
• U-boot may fail to boot because of stale d-cache entry   Jeungwoo Yoo
• [PATCH] env: do not fail on non-existing env.in file   Andrey Zhizhikin
• [PATCH] net: tftp: fix tftp server initialization   Arjan Minzinga Zijlstra
• Fwd: Re: U-Boot and DM9000 eth driver support   Marcel Ziswiler
• [PATCH] ARM: dts: colibri-imx6ull: fix mac address passing   Marcel Ziswiler
• [PATCH] ARM: dts: colibri-imx6ull: fix mac address passing   Marcel Ziswiler
• [PATCH] imx: add i.MX8MN DDR3L evk board support   Marcel Ziswiler
• [PATCH v1 00/24] toradex updates: assortment of fixes and improvements   Marcel Ziswiler
• [PATCH v1 01/24] arm64: dts: imx8mm-u-boot.dtsi: imx8mp-u-boot.dtsi: use atf-bl31 type   Marcel Ziswiler
• [PATCH v1 02/24] configs: verdin-imx8mm: verdin-imx8mp: enable dm serial   Marcel Ziswiler
• [PATCH v1 03/24] toradex: apalis-imx8x: drop support for apalis imx8x   Marcel Ziswiler
• [PATCH v1 04/24] toradex: globally disable video support   Marcel Ziswiler
• [PATCH v1 05/24] toradex: set default dhcp distroboot scriptname   Marcel Ziswiler
• [PATCH v1 06/24] toradex: drop legacy nfsboot script   Marcel Ziswiler
• [PATCH v1 07/24] include: colibri_vf: add missing tdxargs variable   Marcel Ziswiler
• [PATCH v1 08/24] colibri-imx6ull: drop vidargs and remove video= settings   Marcel Ziswiler
• [PATCH v1 09/24] configs: toradex: enable missing fit options   Marcel Ziswiler
• [PATCH v1 10/24] configs: colibri-imx7/-emmc: enable booting from usb sdp   Marcel Ziswiler
• [PATCH v1 11/24] apalis-imx6: avoid save environment unasked   Marcel Ziswiler
• [PATCH v1 12/24] apalis-tk1: avoid save environment unasked   Marcel Ziswiler
• [PATCH v1 13/24] board: colibri-imx6ull: Do not leave variant variable unset   Marcel Ziswiler
• [PATCH v1 14/24] configs: tdx: Do not overwrite fdtfile if it got set manually   Marcel Ziswiler
• [PATCH v1 15/24] regulator: fixed: add possibility to enable by clock   Marcel Ziswiler
• [PATCH v1 16/24] board: colibri-imx6ull: fix detecting ethernet phy   Marcel Ziswiler
• [PATCH v1 17/24] board: toradex: drop colibri pxa270 support   Marcel Ziswiler
• [PATCH v1 18/24] disk: part: add the device search failed log msg   Marcel Ziswiler
• [PATCH v1 19/24] colibri-imx6ull: fix nand bch geometry   Marcel Ziswiler
• [PATCH v1 19/24] colibri-imx6ull: fix nand bch geometry   Marcel Ziswiler
• [PATCH v1 19/24] colibri-imx6ull: fix nand bch geometry   Marcel Ziswiler
• [PATCH v1 20/24] board: colibri_imx7: fix usb start on solo   Marcel Ziswiler
• [PATCH v1 21/24] configs: tdx: apalis_imx6: drop hw v1.0 support   Marcel Ziswiler
• [PATCH v1 22/24] configs: tdx: apalis/colibri_imx6: use preboot as well   Marcel Ziswiler
• [PATCH v1 23/24] configs: colibri-imx6ull/-emmc: use micrel ksz8xxx phy driver   Marcel Ziswiler
• [PATCH v1 24/24] board: colibri-imx6ull: fix detecting sd card   Marcel Ziswiler
• [PATCH] ARM: imx8mm: verdin-imx8mm: Drop superfluous header   Marcel Ziswiler
• [PATCH v1 19/24] colibri-imx6ull: fix nand bch geometry   Marcel Ziswiler
• [PATCH v2 00/11] toradex updates: assortment of fixes and improvements   Marcel Ziswiler
• [PATCH v2 01/11] toradex: apalis-imx8x: drop support for apalis imx8x   Marcel Ziswiler
• [PATCH v2 02/11] toradex: globally disable video support   Marcel Ziswiler
• [PATCH v2 03/11] toradex: set default dhcp distroboot scriptname   Marcel Ziswiler
• [PATCH v2 04/11] toradex: drop legacy nfsboot script   Marcel Ziswiler
• [PATCH v2 05/11] configs: toradex: enable missing fit options   Marcel Ziswiler
• [PATCH v2 06/11] configs: colibri-imx7/-emmc: enable booting from usb sdp   Marcel Ziswiler
• [PATCH v2 07/11] configs: tdx: Do not overwrite fdtfile if it got set manually   Marcel Ziswiler
• [PATCH v2 08/11] board: toradex: drop colibri pxa270 support   Marcel Ziswiler
• [PATCH v2 09/11] board: colibri_imx7: fix usb start on solo   Marcel Ziswiler
• [PATCH v2 10/11] configs: tdx: apalis_imx6: drop hw v1.0 support   Marcel Ziswiler
• [PATCH v2 11/11] configs: tdx: apalis/colibri_imx6: use preboot as well   Marcel Ziswiler
• [PATCH] verdin-imx8mm, verdin-imx8mp: Fix default systemd console output   Marcel Ziswiler
• [PATCH v1] ARM: dts: imx: Fix iMX6QDL DHCOM PDK2 DTC Warnings   Marcel Ziswiler
• [PATCH v1] ARM: dts: imx: Fix iMX6QDL DHCOM PDK2 DTC Warnings   Marcel Ziswiler
• [PATCH v2 0/6] introduce Arm FF-A support   abdellatif.elkhlifi at arm.com
• [PATCH v2 1/6] arm_ffa: introduce Arm FF-A low-level driver   abdellatif.elkhlifi at arm.com
• [PATCH v2 2/6] arm_ffa: introduce armffa command   abdellatif.elkhlifi at arm.com
• [PATCH v2 3/6] arm_ffa: introduce the FF-A Sandbox driver   abdellatif.elkhlifi at arm.com
• [PATCH v2 4/6] arm_ffa: introduce Sandbox test cases for UCLASS_FFA   abdellatif.elkhlifi at arm.com
• [PATCH v2 5/6] arm_ffa: introduce armffa command Sandbox test   abdellatif.elkhlifi at arm.com
• [PATCH v2 6/6] arm_ffa: introduce FF-A MM communication   abdellatif.elkhlifi at arm.com
• [PATCH v3] bosch: Add initial board support for ACC   pro at denx.de
• [PATCH v11 04/14] mx6sabre: Remove unnecessary SPL configs   sbabic at denx.de
• [PATCH v11 13/14] PPC: Enable Job ring driver model.   sbabic at denx.de
• [PATCH v11 10/14] Layerscape: Add crypto node in device tree   sbabic at denx.de
• [PATCH v11 12/14] PPC: Add crypto node in device tree   sbabic at denx.de
• [PATCH v11 09/14] crypto/fsl: i.MX8: Enable Job ring driver model.   sbabic at denx.de
• [PATCH] configs: imx6dl_mamoj_defconfig: Enable LTO on imx6dl_mamoj board   sbabic at denx.de
• [PATCH v11 08/14] i.MX8: Add crypto node in device tree   sbabic at denx.de
• [PATCH v11 06/14] i.MX7: Enable Job ring driver model.   sbabic at denx.de
• [PATCH v11 05/14] i.MX6: Enable Job ring driver model.   sbabic at denx.de
• [PATCH v11 07/14] i.MX7ULP: Enable Job ring driver model.   sbabic at denx.de
• [PATCH v11 03/14] crypto/fsl: i.MX8M: Enable Job ring driver model.   sbabic at denx.de
• [PATCH v11 14/14] update CAAM MAINTAINER   sbabic at denx.de
• [PATCH v11 01/14] crypto/fsl: Add support for CAAM Job ring driver model   sbabic at denx.de
• [PATCH v11 02/14] i.MX8M: crypto: updated device tree for supporting DM in SPL   sbabic at denx.de
• [PATCH v11 11/14] Layerscape: Enable Job ring driver model.   sbabic at denx.de
• [PATCH 4/6] imx: imx8m: soc: runtime drop extcon property from usbotg node   sbabic at denx.de
• [PATCH V2 14/26] misc: S400_API: add ahab_release_caam   sbabic at denx.de
• [PATCH v1 02/24] configs: verdin-imx8mm: verdin-imx8mp: enable dm serial   sbabic at denx.de
• [PATCH] imx: imx8mm/imx8mn_beacon: Remove redundant code   sbabic at denx.de
• [PATCH v5 8/9] arm: dts: imx8mm_evk: add pwm1/backlight support   sbabic at denx.de
• [PATCH v3] ARM: dts: imx: Add support for Data Modul i.MX8M Mini eDM SBC   sbabic at denx.de
• [PATCH V2 06/26] imx: imx8ulp_evk: Remove PMIC Bucks PWM mode settings   sbabic at denx.de
• [PATCH] ARM: imx8mm: verdin-imx8mm: Drop superfluous header   sbabic at denx.de
• [PATCH v1 19/24] colibri-imx6ull: fix nand bch geometry   sbabic at denx.de
• [PATCH v5 1/9] arch: mach-imx: imx8m: add pwm ctrl registers fields defines   sbabic at denx.de
• [PATCH v7 1/3] dt-bindings: imx8mq-clock: add mainline definitions   sbabic at denx.de
• [PATCH 6/6] imx8m: soc: Relocate u-boot to the top DDR in 4GB space   sbabic at denx.de
• [PATCH 1/2] ARM: imx: imx8m: Add 933 MHz PLL settings   sbabic at denx.de
• [PATCH V2 12/26] imx: imx8ulp: Change LPAV assignment for dual boot   sbabic at denx.de
• [PATCH v1 12/24] apalis-tk1: avoid save environment unasked   sbabic at denx.de
• [PATCH] pmic: pca9450: Add PCA9450C compatible string   sbabic at denx.de
• [PATCH v2 1/5] imx8mm-cl-iot-gate: Add SPL EEPROM support   sbabic at denx.de
• [PATCH v2 3/5] imx8mm-cl-iot-gate: Retrieve the MAC address from EEPROM   sbabic at denx.de
• [PATCH V2 17/26] imx: imx8ulp_evk: Update LPDDR4 PHY settings   sbabic at denx.de
• [PATCH] ARM: dts: net: dwc_eth_qos: Fix i.MX8MP compatible string   sbabic at denx.de
• [PATCH 1/2] arm: imx: imx8mm_beacon: Remove unnecessary configs   sbabic at denx.de
• [PATCH V2 05/26] imx: imx8ulp: add CAAM clock entry   sbabic at denx.de
• [PATCH v1 07/24] include: colibri_vf: add missing tdxargs variable   sbabic at denx.de
• [PATCH 1/7] board: gateworks: gw_ventana: convert to DM_I2C   sbabic at denx.de
• [PATCH V2 24/26] imx: imx8ulp_evk: enlarge CONFIG_NR_DRAM_BANKS   sbabic at denx.de
• [PATCH] arm: imx: parse-container: add some missing end of line   sbabic at denx.de
• [PATCH v5 7/9] driver: pwm: pwm-imx: separe dm from non dm implementation   sbabic at denx.de
• [PATCH 5/5] imx8mm-cl-iot-gate: Add redundand environment support   sbabic at denx.de
• [PATCH V2 25/26] imx: imx8ulp_evk: Enable multiple env storage devices   sbabic at denx.de
• [PATCH V2 23/26] imx: imx8ulp: reserve tee memory   sbabic at denx.de
• [PATCH v5 5/9] driver: pwm: pwm-imx: get and enable per/ipg clock using dm   sbabic at denx.de
• [PATCH v2 05/23] pmic: pca9450: Add PCA9450C compatible string   sbabic at denx.de
• [PATCH V2 01/26] imx: imx8ulp: Set COUNTER_FREQUENCY to 1Mhz   sbabic at denx.de
• [PATCH v5 5/7] net: phy: Add phy_modify() accessor   sbabic at denx.de
• [PATCH V2 07/26] imx: imx8ulp: add ND/LD clock   sbabic at denx.de
• [PATCH V2 04/26] imx: imx8ulp: clock: Add clock support for i3c controller   sbabic at denx.de
• [PATCH v5 3/9] clk: imx8mm: add pwm clocks support   sbabic at denx.de
• [PATCH v1 01/24] arm64: dts: imx8mm-u-boot.dtsi: imx8mp-u-boot.dtsi: use atf-bl31 type   sbabic at denx.de
• [PATCH] warp7: Remove UART initialization code   sbabic at denx.de
• [PATCH v7 2/3] clk: imx8mq: Add a clock driver for the imx8mq   sbabic at denx.de
• [PATCH v2 20/23] phy: phy-imx8mq-usb: Add support for i.MX8MP USB PHY   sbabic at denx.de
• [PATCH v2 2/5] imx8mm-cl-iot-gate: Retrieve the DDR type from EEPROM   sbabic at denx.de
• [PATCH 2/2] arm: imx: imx8mn_beacon: Remove unnecessary configs   sbabic at denx.de
• [PATCH v5 6/9] driver: pwm: pwm-imx: introduce pwm_dm_imx_get_parms   sbabic at denx.de
• [PATCH 5/7] drivers: misc: add Gateworks System Controller driver   sbabic at denx.de
• [PATCH v5 4/9] drivers: pwm: pwm-imx: move pwm-imx-util into pwm-imx   sbabic at denx.de
• [PATCH 3/5] imx8mm-cl-iot-gate: Retrieve the MAC address from EEPROM   sbabic at denx.de
• [PATCH 2/5] imx8mm-cl-iot-gate: Retrieve the DDR type from EEPROM   sbabic at denx.de
• [PATCH v1 18/24] disk: part: add the device search failed log msg   sbabic at denx.de
• [PATCH v5 2/9] arch: mach-imx: imx8m: add pwm_regs struct in imx-regs   sbabic at denx.de
• [PATCH] tbs2910: Convert to DM_SERIAL   sbabic at denx.de
• [PATCH v1 24/24] board: colibri-imx6ull: fix detecting sd card   sbabic at denx.de
• [PATCH 2/6] imx: imx8mp: detect i.MX8MP UltraLite when get cpu rev   sbabic at denx.de
• [PATCH v1 15/24] regulator: fixed: add possibility to enable by clock   sbabic at denx.de
• [PATCH v7 3/3] clk: imx8m: reduce rate table duplication   sbabic at denx.de
• [PATCH v1 1/2] mx6: ddr: Restore ralat/walat in write level calibration   sbabic at denx.de
• [PATCH V2 08/26] imx: imx8ulp_evk: Skip init DDR for reboot in dual boot mode   sbabic at denx.de
• [PATCH 5/6] imx8m: soc: drop phy-reset-gpios for fec   sbabic at denx.de
• [PATCH v5 6/7] net: phy: nxp-tja11xx: Add NXP TJA11xx PHY driver   sbabic at denx.de
• [PATCH 1/6] imx: imx8mp: Add iMX8MP UltraLite Part cpu type   sbabic at denx.de
• [PATCH v1] arm: dts: imx8mn_var_som: Set atf-bl31 blob entry type   sbabic at denx.de
• [PATCH v5 4/7] iopoll: Extend read_poll_timeout macro to support variable parameters   sbabic at denx.de
• [PATCH 3/6] imx: imx8mp: disable fused IP for UltraLite   sbabic at denx.de
• [PATCH V2 09/26] imx: imx8ulp: cgc: Switch to NICLPAV to FRO192 before PLL4 init   sbabic at denx.de
• [PATCH V2 20/26] imx: dynamic setting mmcdev and mmcroot   sbabic at denx.de
• [PATCH] ARM: imx: Decode ECSPI env location from i.MX8M ROMAPI tables   sbabic at denx.de
• [PATCH v2 03/23] ARM: imx: imx8m: Add 933 MHz PLL settings   sbabic at denx.de
• [PATCH v5 7/7] bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards   sbabic at denx.de
• [PATCH V2 02/26] imx: imx8ulp: include pcc/cgc header in clock header   sbabic at denx.de
• [PATCH V2 03/26] imx: imx8ulp: Add M33 handshake functions   sbabic at denx.de
• [PATCH v5 3/7] phy: nxp-c45-tja11xx: Rename functions to be c45 tja11xx specific   sbabic at denx.de
• [PATCH v2 04/23] imx8m: ddrphy_utils: Add 3732 MT/s mode   sbabic at denx.de
• [PATCH] imx8ulp: Disable SPL exception vector   sbabic at denx.de
• [PATCH 1/2] ARM: imx8mm: verdin-imx8mm: Rework board_early_init()   sbabic at denx.de
• [PATCH v5 2/7] imx8m: add init_nand_clk   sbabic at denx.de
• [PATCH v5 9/9] configs: imx8mm_evk: add pwm backlight support   sbabic at denx.de
• [PATCH V2 10/26] imx: imx8ulp: enable MU0_B clk by default   sbabic at denx.de
• [PATCH v1 16/24] board: colibri-imx6ull: fix detecting ethernet phy   sbabic at denx.de
• [PATCH V2 26/26] misc: imx8ulp: Update fuse driver   sbabic at denx.de
• [PATCH V2 21/26] imx: imx8ulp_evk: Enable SD/MMC port auto detect   sbabic at denx.de
• [PATCH V2 11/26] misc: imx8ulp: Add OEM SRK Hash fuse support   sbabic at denx.de
• [PATCH v1 2/2] mx6: ddr: Wait before issuing the first MRS cmd   sbabic at denx.de
• [PATCH V2 15/26] misc: S400_API: Update S400 API for buffer dump   sbabic at denx.de
• [PATCH 1/5] imx8mm-cl-iot-gate: Add SPL EEPROM support   sbabic at denx.de
• [PATCH v2 1/2] ARM: imx: imx8mn-evk: enable DM_SERIAL   sbabic at denx.de
• [PATCH] pinctrl: nxp: don't automatically select DEVRES   sbabic at denx.de
• [PATCH V2 13/26] imx: imx8ulp: Load the lposc fuse for dual boot   sbabic at denx.de
• [PATCH V2 16/26] imx: imx8ulp: release CAAM for the Cortex-A35   sbabic at denx.de
• [PATCH] mtd: nand: mxs_nand_spl: Remove the page aligned access   sbabic at denx.de
• [PATCH v5 1/7] imx8m: add regs used by GPMI   sbabic at denx.de
• [PATCH v2 5/5] imx8mm-cl-iot-gate: Add redundand environment support   sbabic at denx.de
• [PATCH v1 23/24] configs: colibri-imx6ull/-emmc: use micrel ksz8xxx phy driver   sbabic at denx.de
• [PATCH V2 18/26] imx: imx8ulp_evk: call the handshake with M33   sbabic at denx.de
• [PATCH v2 4/5] imx8mm-cl-iot-gate: Retrieve the serial number from EEPROM   sbabic at denx.de
• [PATCH v1 08/24] colibri-imx6ull: drop vidargs and remove video= settings   sbabic at denx.de
• [PATCH 2/2] imx8m: ddrphy_utils: Add 3732 MT/s mode   sbabic at denx.de
• [PATCH V2 22/26] imx: imx8ulp: enable wdog_ad interrupt in CMC1   sbabic at denx.de
• [PATCH v1 13/24] board: colibri-imx6ull: Do not leave variant variable unset   sbabic at denx.de
• [PATCH] imx8mq: soc: Set the BYPASS ID SWAP bit (GPR10 bit 1)   sbabic at denx.de
• [PATCH v1 11/24] apalis-imx6: avoid save environment unasked   sbabic at denx.de
• [PATCH v2 1/4] clk: imxrt: Use dts for anatop base address   sbabic at denx.de
• [PATCH] kontron-pitx-imx8m: change environment address variables   sbabic at denx.de
• [PATCH] imx8m{m,n}_venice: update boot_net script to load fdt   sbabic at denx.de
• [PATCH v2 2/4] configs/*imxrt10*: SYS_MALLOC_LEN is too large   sbabic at denx.de
• [PATCH v2 4/4] board: freescale: imxrt10..-evk: Fix missing include of serial.h   sbabic at denx.de
• [PATCH] clk: imx8mp: Add ECSPI clocks   sbabic at denx.de
• [PATCH] imx8m{m,n}-venice-gw7902: add GSC ADC rail for VDD_5P0   sbabic at denx.de
• [PATCH] board: gateworks venice: add support for GPY111 phy   sbabic at denx.de
• [PATCH] mmc: fsl_esdhc_imx: Add i.MX8MP compatible string   sbabic at denx.de
• [PATCH] spi: nxp_fspi: Add i.MX8MP compatible string   sbabic at denx.de
• [PATCH] ARM: imx: romapi: Repair FlexSPI NOR boot offset   sbabic at denx.de
• [PATCH] include: configs: *imx8*: remove IMX_FEC_BASE   sbabic at denx.de
• [PATCH v2 3/4] ARM: dts: imxrt10..-evk: Linux moved pins-imxrt1020 to dts   sbabic at denx.de
• [PATCH 2/2] ARM: dts: imx8mm: Add i.MX8M Mini Toradex Verdin based Menlo board   sbabic at denx.de
• [PATCH] board: venice: add spl_board_loader_name   sbabic at denx.de
• [PATCH] ARM: dts: imx: Add flexspi node to i.MX8MP   sbabic at denx.de
• [PATCH] board: gateworks: venice: add imx8mm-gw7903 support   sbabic at denx.de
• [PATCH] clk: imx8mp: Fix 24M and 32k clock   sbabic at denx.de
• [PATCH v2] ARM: imx: Enable instruction cache early on on i.MX8M   sbabic at denx.de
• [PATCH v3] ARM: imx: Get rid of only i.MX8M SMCCC arch call   sbabic at denx.de
• [PATCH] warp7: Remove duplicated "mmc dev" command   sbabic at denx.de
• [PATCH v2] configs: imx8m{m,n}_venice_defconfig: add usb support   sbabic at denx.de
• [PATCH v2] imx8m{m,n}-venice-gw7902: add support for GPY111 phy   sbabic at denx.de
• [PATCH v2 01/11] toradex: apalis-imx8x: drop support for apalis imx8x   sbabic at denx.de
• [PATCH v2 10/11] configs: tdx: apalis_imx6: drop hw v1.0 support   sbabic at denx.de
• [PATCH v2] arm: dts: imx8m*-venice: add gpio hog support   sbabic at denx.de
• [PATCH] imx8ulp: clock: Fix lcd clock algo   sbabic at denx.de
• [PATCH v4 02/10] imx: power-domain: Descend into pgc subnode if present   sbabic at denx.de
• [PATCH v2 02/11] toradex: globally disable video support   sbabic at denx.de
• [PATCH v2] imx8m{m,n}_venice_defconfig: add DT overlay support   sbabic at denx.de
• [PATCH v2 03/11] toradex: set default dhcp distroboot scriptname   sbabic at denx.de
• [PATCH v2] board: gateworks: gw_ventana: use comomn GSC driver   sbabic at denx.de
• [PATCH v2 06/11] configs: colibri-imx7/-emmc: enable booting from usb sdp   sbabic at denx.de
• [PATCH v2] board: gateworks: venice: use common GSC driver   sbabic at denx.de
• [PATCH v2 05/11] configs: toradex: enable missing fit options   sbabic at denx.de
• [PATCH v4 06/10] imx: power-domain: Add i.MX8MP support   sbabic at denx.de
• [PATCH v4 05/10] power_domain: Add power_domain_get_by_name()   sbabic at denx.de
• [PATCH v2 1/2] board: gateworks: venice: add additional levels for dtb name match   sbabic at denx.de
• [PATCH v4 03/10] imx: power-domain: Inline arch-imx8m/power-domain.h   sbabic at denx.de
• [PATCH v2 04/11] toradex: drop legacy nfsboot script   sbabic at denx.de
• [PATCH v4 10/10] arm: dts: imx8mp: Import GPCv2 subset, HSIOMIX and USB PD   sbabic at denx.de
• [PATCH v2 09/11] board: colibri_imx7: fix usb start on solo   sbabic at denx.de
• [PATCH v2] board: gateworks: venice: enable DM_SERIAL   sbabic at denx.de
• [PATCH v4 01/10] power-domain: Return 0 if ops unimplemented and remove empty functions   sbabic at denx.de
• [PATCH v4 07/10] imx: power-domain: Add i.MX8MP HSIOMIX driver   sbabic at denx.de
• [PATCH v4 09/10] usb: dwc3: Implement .glue_configure for i.MX8MP   sbabic at denx.de
• [PATCH v4 08/10] usb: dwc3: Rename .select_dr_mode to .glue_configure   sbabic at denx.de
• [PATCH v2] imx8m{m,n}_venice: update env memory layout   sbabic at denx.de
• [PATCH v2 07/11] configs: tdx: Do not overwrite fdtfile if it got set manually   sbabic at denx.de
• [PATCH v2 11/11] configs: tdx: apalis/colibri_imx6: use preboot as well   sbabic at denx.de
• [PATCH v4 04/10] imx: power-domain: Get rid of SMCCC dependency   sbabic at denx.de
• [PATCH v2 08/11] board: toradex: drop colibri pxa270 support   sbabic at denx.de
• [PATCH v2 2/2] board: gateworks: venice: add imx8mp-venice-gw740x support   sbabic at denx.de
• [PATCH] imx8m{m, n}_venice_defconfig: enable md5sum and crc32 commands   sbabic at denx.de
• [PATCH 2/2] doc: imx8mn_evk: Do not export ATF_LOAD_ADDR   sbabic at denx.de
• [PATCH] crypto/fsl: Clear the memory when blob decapsulation fails   sbabic at denx.de
• [PATCH V2 05/12] configs: mx7dsabresd: drop unused SDHC macro   sbabic at denx.de
• [PATCH] pci: imx: use vpcie-supply if defined by device-tree   sbabic at denx.de
• [PATCH 1/2] imx: Update FSL_MFGPROT config for iMX8M   sbabic at denx.de
• [PATCH V4 3/4] imx: imx8mn_evk: enable CONFIG_DM_SERIAL   sbabic at denx.de
• [PATCH V4 2/4] imx: imx8mm_evk: enable CONFIG_DM_SERIAL   sbabic at denx.de
• [PATCH V2 02/12] configs: imx8mp_evk: drop unused SDHC macro   sbabic at denx.de
• [PATCH 1/2] imx8mn_evk: Enable cache in SPL   sbabic at denx.de
• [PATCH] configs: ge_bx50v3: remove CONFIG_PCIE_IMX_POWER_GPIO   sbabic at denx.de
• [PATCH v2] ARM: imx: imx8mn-evk: change environment address variables   sbabic at denx.de
• [PATCH v2] crypto/fsl: add invalidate_dcache_range for hash output buffer   sbabic at denx.de
• [PATCH V2 03/12] configs: imx8mn_evk: drop unused SDHC macro   sbabic at denx.de
• [PATCH V2 04/12] configs: mx6sxsabresd: drop CONFIG_SYS_FSL_USDHC_NUM   sbabic at denx.de
• [PATCH V3] board: bsh: imx8mn_bsh_smm_s2/s2pro: enable DM_SERIAL   sbabic at denx.de
• [PATCH V2 12/12] configs: imx: drop IMX_FEC_BASE   sbabic at denx.de
• [PATCH V2 07/12] configs: verdin-imx8m: drop unused SDHC macro   sbabic at denx.de
• [PATCH v2 1/1] imx8mm-cl-iot-gate: Remove redundant board_fix_fdt()   sbabic at denx.de
• [PATCH V2 01/12] configs: imx8mm_evk: drop unused SDHC macro   sbabic at denx.de
• [PATCH V2 11/12] scripts: config_whitelist: drop CONFIG_MMCROOT   sbabic at denx.de
• [PATCH V2 06/12] configs: imx8qm/qxp_evk: drop unused SDHC macro   sbabic at denx.de
• [PATCH] ARM: imx: imx8m: Fix board_get_usable_ram_top()   sbabic at denx.de
• [PATCH V2 08/12] configs: imx8mm/n_venice: drop unused SDHC macro   sbabic at denx.de
• [PATCH V2 10/12] configs: drop CONFIG_MMCROOT   sbabic at denx.de
• [PATCH V2 09/12] configs: phycore_imx8mm/p: drop unused SDHC macro   sbabic at denx.de
• [PATCH 2/2] imx: Fix build error   sbabic at denx.de
• [PATCH V4 1/4] imx: imx8mp_evk: enable CONFIG_DM_SERIAL   sbabic at denx.de
• [PATCH] arm: dts: imx8mp: add of-list support to common imx8mp-u-boot.dtsi   sbabic at denx.de
• [PATCH V4 4/4] imx: imx8mq-evk: enable CONFIG_DM_SERIAL   sbabic at denx.de
• [PATCH] pci: imx: remove weak overrides no longer used   sbabic at denx.de
• [PATCH] ARM: imx: Fix parsing of ROM log event IDs on iMX8M   fedorross at gmail.com
• [PATCH] Add support for TP-Link UE200 dongle   ootitov at gmail.com
• [RFC PATCH] mips: dts: add initial support for ls1c300 SoC   dhu at hodcarrier.org
• [PATCH] mtd: spi-nor-ids: add Macronix flash entry   tien.fong.chee at intel.com
• [PATCH] ddr: altera: Ignore bit[7-4] for both seq2core & core2seq handshake in HPS   tien.fong.chee at intel.com
• [PATCH] ddr: altera: Stratix10: Use phys_size_t for memory size   tien.fong.chee at intel.com
• [PATCH] arm: dts: socfpga: stratix10: Update MMC smplsel value   yau.wai.gan at intel.com
• [PATCH] Revert "env: Load env when ENV_IS_NOWHERE is only location selected"   Felix.Vietmeyer at jila.colorado.edu
• [PATCH] Revert "env: Load env when ENV_IS_NOWHERE is only location selected"   Felix.Vietmeyer at jila.colorado.edu
• [PATCH v8 0/5] add TCB driver for sama5d2   Eugen.Hristev at microchip.com
• [PULL next] u-boot-at91-2022.07-a   Eugen.Hristev at microchip.com
• [PATCH] w1: w1-gpio: Loosen timings to improve cold boot reliability   Eugen.Hristev at microchip.com
• [PULL] u-boot-at91-2022.07-b   Eugen.Hristev at microchip.com
• [PATCH 0/5] sysreset: Add Atmel/Microchip sysreset driver   Eugen.Hristev at microchip.com
• [PATCHv3 0/3] Add support for sam9x60_curiosity   Eugen.Hristev at microchip.com
• [PATCH 1/2] timers: atmel_tcb: introduce CONFIG_SPL_ATMEL_TCB   Eugen.Hristev at microchip.com
• [PATCH] ARM: dts: sam9x60: Add pit64b node   Eugen.Hristev at microchip.com
• [PATCH v2] include: configs: at91/sam: remove stray #ifdef/#else   Eugen.Hristev at microchip.com
• [PATCH v2] spi: atmel-quadspi: Fix the buswidth adjustment between spi-mem and controller   Eugen.Hristev at microchip.com
• [PATCH] ARM: dts: at91: sama7g5: Fix QSPI1 clock   Eugen.Hristev at microchip.com
• [PATCH] ARM: dts: at91: sama7g5ek: Align the impedance of the QSPI0's HSIO and PCB lines   Eugen.Hristev at microchip.com
• [PATCH] misc: i2c_eeprom: fix at24c32 offset_len   Eugen.Hristev at microchip.com
• [l4m-2022.04][u-boot-at91] spi: atmel-quadspi.c: Fix the buswidth adjustment between spi-mem and controller   Tudor.Ambarus at microchip.com
• [PATCH v1] net: eth-uclass: Fix eth_halt   qianfan
• [PATCH v2 2/2] net: eth-uclass: Fix data abort when tftp get nonexistent file via usb   qianfan
• [PATCH v1] sunxi: Make SYS_VENDOR, SYS_BOARD, SYS_CONFIG_NAME configurable   qianfan
• [PATCH v1] sunxi: Make SYS_VENDOR, SYS_BOARD, SYS_CONFIG_NAME configurable   qianfan