spl: spi: Raw Kernel Image Support for Falcon Mode Boot Via SPI Devices

Sean Anderson sean.anderson at seco.com
Wed Apr 20 00:03:46 CEST 2022


Hi Nathan,

On 4/19/22 5:49 PM, Nathan Barrett-Morrison wrote:
> [You don't often get email from nathan.morrison at timesys.com. Learn why this is important at http://aka.ms/LearnAboutSenderIdentification.]
> 
> Hi Sean,
> 
> Thanks for the response.  I don't have my embedded board I'm doing this on quite up to this version of U-Boot, but it does appear your patchset should resolve my issue in the future.  So please disregard my patch, I think we're good!

Actually, I'm not sure it will resolve your issue, since you seem to be having issues
with falcon boot, which I didn't modify. Can you try the following patch in addition
to the ones I linked above? I haven't tested it at all, so ymmv.

diff --git a/common/spl/spl_spi.c b/common/spl/spl_spi.c
index 037db1a19f..0ab8a10300 100644
--- a/common/spl/spl_spi.c
+++ b/common/spl/spl_spi.c
@@ -18,41 +18,6 @@
 #include <asm/global_data.h>
 #include <dm/ofnode.h>
 
-#if CONFIG_IS_ENABLED(OS_BOOT)
-/*
- * Load the kernel, check for a valid header we can parse, and if found load
- * the kernel and then device tree.
- */
-static int spi_load_image_os(struct spl_image_info *spl_image,
-			     struct spl_boot_device *bootdev,
-			     struct spi_flash *flash,
-			     struct image_header *header)
-{
-	int err;
-
-	/* Read for a header, parse or error out. */
-	spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS, sizeof(*header),
-		       (void *)header);
-
-	if (image_get_magic(header) != IH_MAGIC)
-		return -1;
-
-	err = spl_parse_image_header(spl_image, bootdev, header);
-	if (err)
-		return err;
-
-	spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS,
-		       spl_image->size, (void *)spl_image->load_addr);
-
-	/* Read device tree. */
-	spi_flash_read(flash, CONFIG_SYS_SPI_ARGS_OFFS,
-		       CONFIG_SYS_SPI_ARGS_SIZE,
-		       (void *)CONFIG_SYS_SPL_ARGS_ADDR);
-
-	return 0;
-}
-#endif
-
 static ulong spl_spi_fit_read(struct spl_load_info *load, ulong sector,
 			      ulong count, void *buf)
 {
@@ -71,6 +36,29 @@ unsigned int __weak spl_spi_get_uboot_offs(struct spi_flash *flash)
 	return CONFIG_SYS_SPI_U_BOOT_OFFS;
 }
 
+static int spi_do_load_image(struct spl_image_info *spl_image,
+			     struct spl_boot_device *bootdev,
+			     struct spl_load_info *load,
+			     unsigned int payload_offs)
+{
+	int ret;
+	struct image_header *header;
+
+	header = spl_get_load_buffer(-sizeof(*header), sizeof(*header));
+
+	/* mkimage header is 64 bytes. */
+	ret = spi_flash_read(flash, payload_offs, sizeof(*header),
+			     (void *)header);
+	if (ret) {
+		debug("%s: Failed to read from SPI flash (err=%d)\n",
+		      __func__, ret);
+		return ret;
+	}
+
+	return spl_load(spl_image, bootdev, &load, header, 0,
+			payload_offs);
+}
+
 /*
  * The main entry for SPI booting. It's necessary that SDRAM is already
  * configured and available since this code loads the main U-Boot image
@@ -82,7 +70,6 @@ static int spl_spi_load_image(struct spl_image_info *spl_image,
 	int err = 0;
 	unsigned int payload_offs;
 	struct spi_flash *flash;
-	struct image_header *header;
 	struct spl_load_info load = {
 		.bl_len = 1,
 		.read = spl_spi_fit_read,
@@ -106,31 +93,24 @@ static int spl_spi_load_image(struct spl_image_info *spl_image,
 	load.dev = flash;
 	payload_offs = spl_spi_get_uboot_offs(flash);
 
-	header = spl_get_load_buffer(-sizeof(*header), sizeof(*header));
-
 	if (CONFIG_IS_ENABLED(OF_REAL)) {
 		payload_offs = ofnode_conf_read_int("u-boot,spl-payload-offset",
 						    payload_offs);
 	}
 
 #if CONFIG_IS_ENABLED(OS_BOOT)
-	if (spl_start_uboot() || spi_load_image_os(spl_image, bootdev, flash, header))
-#endif
-	{
-		/* Load u-boot, mkimage header is 64 bytes. */
-		err = spi_flash_read(flash, payload_offs, sizeof(*header),
-				     (void *)header);
-		if (err) {
-			debug("%s: Failed to read from SPI flash (err=%d)\n",
-			      __func__, err);
-			return err;
-		}
-
-		err = spl_load(spl_image, bootdev, &load, header, 0,
-			       payload_offs);
+	if (spl_start_uboot()) {
+		err = spi_do_load_image(spl_image, bootdev, &load,
+					CONFIG_SYS_SPI_KERNEL_OFFS);
+		if (!err)
+			/* Read device tree. */
+			return spi_flash_read(flash, CONFIG_SYS_SPI_ARGS_OFFS,
+					      CONFIG_SYS_SPI_ARGS_SIZE,
+					      (void *)CONFIG_SYS_SPL_ARGS_ADDR);
 	}
+#endif
 
-	return err;
+	return spi_do_load_image(spl_image, bootdev, &load, payload_offs);
 }
 /* Use priorty 1 so that boards can override this */
 SPL_LOAD_IMAGE_METHOD("SPI", 1, BOOT_DEVICE_SPI, spl_spi_load_image);
-- 
2.35.1.1320.gc452695387.dirty


More information about the U-Boot mailing list