[PATCH v9 14/16] rockchip: rk3066: add mk808_defconfig

[Kever Yang]

On 2022/4/4 22:19, Johan Jonker wrote:
> This commit adds the default configuration file and
> relevant description for a MK808 board.
>
> Signed-off-by: Johan Jonker <jbx6244 at gmail.com>

Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>
> changed V9:
>    enable led gpio
>    disable STIMER
>
> Changed V8:
>    use default log level
>    ENV_IS_NOWHERE
> ---
>   configs/mk808_defconfig | 100 ++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 100 insertions(+)
>   create mode 100644 configs/mk808_defconfig
>
> diff --git a/configs/mk808_defconfig b/configs/mk808_defconfig
> new file mode 100644
> index 0000000000..b475e73540
> --- /dev/null
> +++ b/configs/mk808_defconfig
> @@ -0,0 +1,100 @@
> +CONFIG_ARM=y
> +# CONFIG_SPL_SYS_THUMB_BUILD is not set
> +# CONFIG_TPL_SYS_THUMB_BUILD is not set
> +# CONFIG_SPL_USE_ARCH_MEMCPY is not set
> +# CONFIG_SPL_USE_ARCH_MEMSET is not set
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x60408000
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_ENV_SIZE=0x8000
> +CONFIG_DEFAULT_DEVICE_TREE="rk3066a-mk808"
> +CONFIG_SPL_TEXT_BASE=0x60000000
> +CONFIG_ROCKCHIP_RK3066=y
> +# CONFIG_ROCKCHIP_STIMER is not set
> +CONFIG_TPL_TEXT_BASE=0x10080C04
> +CONFIG_TPL_MAX_SIZE=32764
> +CONFIG_TPL_STACK=0x1008FFFF
> +CONFIG_TARGET_MK808=y
> +CONFIG_SPL_STACK_R_ADDR=0x70000000
> +CONFIG_DEBUG_UART_BASE=0x20064000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_SPL_FS_FAT=y
> +CONFIG_SYS_LOAD_ADDR=0x70800800
> +CONFIG_SPL_PAYLOAD="u-boot.bin"
> +CONFIG_DEBUG_UART=y
> +CONFIG_SD_BOOT=y
> +CONFIG_USE_PREBOOT=y
> +CONFIG_DEFAULT_FDT_FILE="rk3066a-mk808.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_BOARD_LATE_INIT=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x200000
> +CONFIG_SPL_SEPARATE_BSS=y
> +CONFIG_SPL_FS_EXT4=y
> +CONFIG_SYS_MMCSD_FS_BOOT_PARTITION=2
> +CONFIG_TPL_NEEDS_SEPARATE_STACK=y
> +# CONFIG_BOOTM_PLAN9 is not set
> +# CONFIG_BOOTM_RTEMS is not set
> +# CONFIG_BOOTM_VXWORKS is not set
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_CACHE=y
> +CONFIG_CMD_TIME=y
> +CONFIG_CMD_REGULATOR=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_TPL_OF_CONTROL=y
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_OF_DTB_PROPS_REMOVE=y
> +CONFIG_SPL_OF_PLATDATA=y
> +CONFIG_TPL_OF_PLATDATA=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +# CONFIG_NET is not set
> +CONFIG_TPL_DM=y
> +# CONFIG_DM_WARN is not set
> +CONFIG_REGMAP=y
> +CONFIG_SPL_REGMAP=y
> +CONFIG_TPL_REGMAP=y
> +CONFIG_SYSCON=y
> +CONFIG_SPL_SYSCON=y
> +CONFIG_TPL_SYSCON=y
> +# CONFIG_SIMPLE_BUS is not set
> +# CONFIG_SPL_SIMPLE_BUS is not set
> +# CONFIG_TPL_BLK is not set
> +CONFIG_CLK=y
> +CONFIG_SPL_CLK=y
> +CONFIG_TPL_CLK=y
> +CONFIG_ROCKCHIP_GPIO=y
> +# CONFIG_SPL_DM_I2C is not set
> +CONFIG_LED=y
> +CONFIG_LED_GPIO=y
> +CONFIG_MMC_IO_VOLTAGE=y
> +CONFIG_SPL_MMC_IO_VOLTAGE=y
> +CONFIG_MMC_UHS_SUPPORT=y
> +CONFIG_SPL_MMC_UHS_SUPPORT=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_SF_DEFAULT_SPEED=20000000
> +CONFIG_PINCTRL=y
> +CONFIG_DM_PMIC=y
> +# CONFIG_SPL_PMIC_CHILDREN is not set
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_DM_REGULATOR_GPIO=y
> +CONFIG_RAM=y
> +CONFIG_SPL_RAM=y
> +CONFIG_TPL_RAM=y
> +CONFIG_DM_RESET=y
> +# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_DEBUG_UART_ANNOUNCE=y
> +CONFIG_ROCKCHIP_SERIAL=y
> +CONFIG_SYSRESET=y
> +CONFIG_TIMER=y
> +CONFIG_SPL_TIMER=y
> +CONFIG_TPL_TIMER=y
> +CONFIG_DESIGNWARE_APB_TIMER=y
> +CONFIG_SPL_TINY_MEMSET=y
> +CONFIG_ERRNO_STR=y
> +# CONFIG_TPL_OF_LIBFDT is not set