EXT: [PATCH] pci: imx: use vpcie-supply if defined by device-tree

Tim Harvey tharvey at gateworks.com
Thu Apr 14 17:46:14 CEST 2022


On Thu, Apr 14, 2022 at 2:14 AM Ian Ray <ian.ray at ge.com> wrote:
>
> On Wed, Apr 13, 2022 at 03:54:37PM -0700, Tim Harvey wrote:
> >
> > If vpcie-supply is defined by device-tree use that if
> > CONFIG_PCIE_IMX_POWER_GPIO is not defined.
> >
> > Note that after this the following boards which define
> > CONFIG_PCIE_IMX_POWER_GPIO in their board header file as well as their
> > device-tree should be able to remove CONFIG_PCIE_IMX_PERST_GPIO without
> > consequence:
> >  - mx6sabresd
> >  - mx6sxsabresd
> >  - novena
> >
> > Note that the ge_bx50v3 board uses CONFIG_PCIE_IMX_POWER_GPIO and does
> > not have vpcie-supply defined in it's pcie node in the dt thus removing
> > CONFIG_PCIE_IMX_POWER_GPIO globally can't be done until that board adds
> > vpcie-supply.
>
> The use of CONFIG_PCIE_IMX_POWER_GPIO by ge_bx50v3 appears to be a
> mistake.  That GPIO is actually an input "Q7_3V3_PCIE_WAKE#_IN".  Thank
> you for the report -- I will prepare a patch to remove that #define.
>

Ian,

Great... cc me on that patch if you don't mind.

Marek, looks like you're the maintainer of the novena board, do you
have one around to test PCI reset with CONFIG_PCIE_IMX_POWER_GPIO
removed?

Fabio, looks like you're the maintainer of the mx6sabresd and
mx6sxsabresd boards, do you have one around to test PCI reset with
CONFIG_PCIE_IMX_POWER_GPIO removed?

If Marke and Fabio can confirm that removing
CONFIG_PCIE_IMX_POWER_GPIO isn't an issue I can submit a series with
this followed by the removal of CONFIG_PCIE_IMX_POWER_GPIO.

Best Regards,

Tim

>
> >
> > Cc: Ian Ray <ian.ray at ge.com> (maintainer:GE BX50V3 BOARD)
> > Cc: Sebastian Reichel <sebastian.reichel at collabora.com> (maintainer:GE BX50V3 BOARD)
> > Cc: Fabio Estevam <festevam at gmail.com> (maintainer:MX6SABRESD BOARD)
> > Cc: Marek Vasut <marex at denx.de> (maintainer:NOVENA BOARD)
> > Signed-off-by: Tim Harvey <tharvey at gateworks.com>
> > ---
> >  arch/arm/include/asm/arch-mx6/sys_proto.h |  2 +-
> >  drivers/pci/pcie_imx.c                    | 19 +++++++++++++++++--
> >  2 files changed, 18 insertions(+), 3 deletions(-)
> >
> > diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h
> > index c49759af92d1..c7542e4b04e1 100644
> > --- a/arch/arm/include/asm/arch-mx6/sys_proto.h
> > +++ b/arch/arm/include/asm/arch-mx6/sys_proto.h
> > @@ -18,7 +18,7 @@
> >  #define is_usbotg_phy_active(void) (!(readl(USB_PHY0_BASE_ADDR + USBPHY_PWD) & \
> >                                  USBPHY_PWD_RXPWDRX))
> >
> > -int imx6_pcie_toggle_power(void);
> > +int imx6_pcie_toggle_power(struct udevice *vpcie);
> >  int imx6_pcie_toggle_reset(struct gpio_desc *gpio, bool active_high);
> >
> >  enum ldo_reg {
> > diff --git a/drivers/pci/pcie_imx.c b/drivers/pci/pcie_imx.c
> > index 2cec3900e9ad..f8daedbce359 100644
> > --- a/drivers/pci/pcie_imx.c
> > +++ b/drivers/pci/pcie_imx.c
> > @@ -14,6 +14,7 @@
> >  #include <log.h>
> >  #include <malloc.h>
> >  #include <pci.h>
> > +#include <power/regulator.h>
> >  #include <asm/arch/clock.h>
> >  #include <asm/arch/iomux.h>
> >  #include <asm/arch/crm_regs.h>
> > @@ -102,6 +103,7 @@ struct imx_pcie_priv {
> >       void __iomem            *cfg_base;
> >       struct gpio_desc        reset_gpio;
> >       bool                    reset_active_high;
> > +     struct udevice          *vpcie;
> >  };
> >
> >  /*
> > @@ -530,7 +532,7 @@ static int imx6_pcie_init_phy(void)
> >       return 0;
> >  }
> >
> > -__weak int imx6_pcie_toggle_power(void)
> > +__weak int imx6_pcie_toggle_power(struct udevice *vpcie)
> >  {
> >  #ifdef CONFIG_PCIE_IMX_POWER_GPIO
> >       gpio_request(CONFIG_PCIE_IMX_POWER_GPIO, "pcie_power");
> > @@ -540,6 +542,15 @@ __weak int imx6_pcie_toggle_power(void)
> >       mdelay(20);
> >       gpio_free(CONFIG_PCIE_IMX_POWER_GPIO);
> >  #endif
> > +
> > +#if CONFIG_IS_ENABLED(DM_REGULATOR)
> > +     if (vpcie) {
> > +             regulator_set_enable(vpcie, false);
> > +             mdelay(20);
> > +             regulator_set_enable(vpcie, true);
> > +             mdelay(20);
> > +     }
> > +#endif
> >       return 0;
> >  }
> >
> > @@ -598,7 +609,7 @@ static int imx6_pcie_deassert_core_reset(struct imx_pcie_priv *priv)
> >  {
> >       struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
> >
> > -     imx6_pcie_toggle_power();
> > +     imx6_pcie_toggle_power(priv->vpcie);
> >
> >       enable_pcie_clock();
> >
> > @@ -717,6 +728,10 @@ static int imx_pcie_dm_probe(struct udevice *dev)
> >  {
> >       struct imx_pcie_priv *priv = dev_get_priv(dev);
> >
> > +#if CONFIG_IS_ENABLED(DM_REGULATOR)
> > +     device_get_supply_regulator(dev, "vpcie-supply", &priv->vpcie);
> > +#endif
> > +
> >       /* if PERST# valid from dt then assert it */
> >       gpio_request_by_name(dev, "reset-gpio", 0, &priv->reset_gpio,
> >                            GPIOD_IS_OUT);
> > --
> > 2.17.1
> >
> >


More information about the U-Boot mailing list