EXT: [PATCH] pci: imx: use vpcie-supply if defined by device-tree
Ian Ray
ian.ray at ge.com
Thu Apr 14 11:14:01 CEST 2022
On Wed, Apr 13, 2022 at 03:54:37PM -0700, Tim Harvey wrote:
>
> If vpcie-supply is defined by device-tree use that if
> CONFIG_PCIE_IMX_POWER_GPIO is not defined.
>
> Note that after this the following boards which define
> CONFIG_PCIE_IMX_POWER_GPIO in their board header file as well as their
> device-tree should be able to remove CONFIG_PCIE_IMX_PERST_GPIO without
> consequence:
> - mx6sabresd
> - mx6sxsabresd
> - novena
>
> Note that the ge_bx50v3 board uses CONFIG_PCIE_IMX_POWER_GPIO and does
> not have vpcie-supply defined in it's pcie node in the dt thus removing
> CONFIG_PCIE_IMX_POWER_GPIO globally can't be done until that board adds
> vpcie-supply.
The use of CONFIG_PCIE_IMX_POWER_GPIO by ge_bx50v3 appears to be a
mistake. That GPIO is actually an input "Q7_3V3_PCIE_WAKE#_IN". Thank
you for the report -- I will prepare a patch to remove that #define.
>
> Cc: Ian Ray <ian.ray at ge.com> (maintainer:GE BX50V3 BOARD)
> Cc: Sebastian Reichel <sebastian.reichel at collabora.com> (maintainer:GE BX50V3 BOARD)
> Cc: Fabio Estevam <festevam at gmail.com> (maintainer:MX6SABRESD BOARD)
> Cc: Marek Vasut <marex at denx.de> (maintainer:NOVENA BOARD)
> Signed-off-by: Tim Harvey <tharvey at gateworks.com>
> ---
> arch/arm/include/asm/arch-mx6/sys_proto.h | 2 +-
> drivers/pci/pcie_imx.c | 19 +++++++++++++++++--
> 2 files changed, 18 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h
> index c49759af92d1..c7542e4b04e1 100644
> --- a/arch/arm/include/asm/arch-mx6/sys_proto.h
> +++ b/arch/arm/include/asm/arch-mx6/sys_proto.h
> @@ -18,7 +18,7 @@
> #define is_usbotg_phy_active(void) (!(readl(USB_PHY0_BASE_ADDR + USBPHY_PWD) & \
> USBPHY_PWD_RXPWDRX))
>
> -int imx6_pcie_toggle_power(void);
> +int imx6_pcie_toggle_power(struct udevice *vpcie);
> int imx6_pcie_toggle_reset(struct gpio_desc *gpio, bool active_high);
>
> enum ldo_reg {
> diff --git a/drivers/pci/pcie_imx.c b/drivers/pci/pcie_imx.c
> index 2cec3900e9ad..f8daedbce359 100644
> --- a/drivers/pci/pcie_imx.c
> +++ b/drivers/pci/pcie_imx.c
> @@ -14,6 +14,7 @@
> #include <log.h>
> #include <malloc.h>
> #include <pci.h>
> +#include <power/regulator.h>
> #include <asm/arch/clock.h>
> #include <asm/arch/iomux.h>
> #include <asm/arch/crm_regs.h>
> @@ -102,6 +103,7 @@ struct imx_pcie_priv {
> void __iomem *cfg_base;
> struct gpio_desc reset_gpio;
> bool reset_active_high;
> + struct udevice *vpcie;
> };
>
> /*
> @@ -530,7 +532,7 @@ static int imx6_pcie_init_phy(void)
> return 0;
> }
>
> -__weak int imx6_pcie_toggle_power(void)
> +__weak int imx6_pcie_toggle_power(struct udevice *vpcie)
> {
> #ifdef CONFIG_PCIE_IMX_POWER_GPIO
> gpio_request(CONFIG_PCIE_IMX_POWER_GPIO, "pcie_power");
> @@ -540,6 +542,15 @@ __weak int imx6_pcie_toggle_power(void)
> mdelay(20);
> gpio_free(CONFIG_PCIE_IMX_POWER_GPIO);
> #endif
> +
> +#if CONFIG_IS_ENABLED(DM_REGULATOR)
> + if (vpcie) {
> + regulator_set_enable(vpcie, false);
> + mdelay(20);
> + regulator_set_enable(vpcie, true);
> + mdelay(20);
> + }
> +#endif
> return 0;
> }
>
> @@ -598,7 +609,7 @@ static int imx6_pcie_deassert_core_reset(struct imx_pcie_priv *priv)
> {
> struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
>
> - imx6_pcie_toggle_power();
> + imx6_pcie_toggle_power(priv->vpcie);
>
> enable_pcie_clock();
>
> @@ -717,6 +728,10 @@ static int imx_pcie_dm_probe(struct udevice *dev)
> {
> struct imx_pcie_priv *priv = dev_get_priv(dev);
>
> +#if CONFIG_IS_ENABLED(DM_REGULATOR)
> + device_get_supply_regulator(dev, "vpcie-supply", &priv->vpcie);
> +#endif
> +
> /* if PERST# valid from dt then assert it */
> gpio_request_by_name(dev, "reset-gpio", 0, &priv->reset_gpio,
> GPIOD_IS_OUT);
> --
> 2.17.1
>
>
More information about the U-Boot
mailing list