[PATCH] pci: imx: use vpcie-supply if defined by device-tree

[Tim Harvey]

If vpcie-supply is defined by device-tree use that if
CONFIG_PCIE_IMX_POWER_GPIO is not defined.

Note that after this the following boards which define
CONFIG_PCIE_IMX_POWER_GPIO in their board header file as well as their
device-tree should be able to remove CONFIG_PCIE_IMX_PERST_GPIO without
consequence:
 - mx6sabresd
 - mx6sxsabresd
 - novena

Note that the ge_bx50v3 board uses CONFIG_PCIE_IMX_POWER_GPIO and does
not have vpcie-supply defined in it's pcie node in the dt thus removing
CONFIG_PCIE_IMX_POWER_GPIO globally can't be done until that board adds
vpcie-supply.

Cc: Ian Ray <ian.ray at ge.com> (maintainer:GE BX50V3 BOARD)
Cc: Sebastian Reichel <sebastian.reichel at collabora.com> (maintainer:GE BX50V3 BOARD)
Cc: Fabio Estevam <festevam at gmail.com> (maintainer:MX6SABRESD BOARD)
Cc: Marek Vasut <marex at denx.de> (maintainer:NOVENA BOARD)
Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
 arch/arm/include/asm/arch-mx6/sys_proto.h |  2 +-
 drivers/pci/pcie_imx.c                    | 19 +++++++++++++++++--
 2 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h
index c49759af92d1..c7542e4b04e1 100644
--- a/arch/arm/include/asm/arch-mx6/sys_proto.h
+++ b/arch/arm/include/asm/arch-mx6/sys_proto.h
@@ -18,7 +18,7 @@
 #define is_usbotg_phy_active(void) (!(readl(USB_PHY0_BASE_ADDR + USBPHY_PWD) & \
 				   USBPHY_PWD_RXPWDRX))
 
-int imx6_pcie_toggle_power(void);
+int imx6_pcie_toggle_power(struct udevice *vpcie);
 int imx6_pcie_toggle_reset(struct gpio_desc *gpio, bool active_high);
 
 enum ldo_reg {
diff --git a/drivers/pci/pcie_imx.c b/drivers/pci/pcie_imx.c
index 2cec3900e9ad..f8daedbce359 100644
--- a/drivers/pci/pcie_imx.c
+++ b/drivers/pci/pcie_imx.c
@@ -14,6 +14,7 @@
 #include <log.h>
 #include <malloc.h>
 #include <pci.h>
+#include <power/regulator.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/iomux.h>
 #include <asm/arch/crm_regs.h>
@@ -102,6 +103,7 @@ struct imx_pcie_priv {
 	void __iomem		*cfg_base;
 	struct gpio_desc	reset_gpio;
 	bool			reset_active_high;
+	struct udevice		*vpcie;
 };
 
 /*
@@ -530,7 +532,7 @@ static int imx6_pcie_init_phy(void)
 	return 0;
 }
 
-__weak int imx6_pcie_toggle_power(void)
+__weak int imx6_pcie_toggle_power(struct udevice *vpcie)
 {
 #ifdef CONFIG_PCIE_IMX_POWER_GPIO
 	gpio_request(CONFIG_PCIE_IMX_POWER_GPIO, "pcie_power");
@@ -540,6 +542,15 @@ __weak int imx6_pcie_toggle_power(void)
 	mdelay(20);
 	gpio_free(CONFIG_PCIE_IMX_POWER_GPIO);
 #endif
+
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
+	if (vpcie) {
+		regulator_set_enable(vpcie, false);
+		mdelay(20);
+		regulator_set_enable(vpcie, true);
+		mdelay(20);
+	}
+#endif
 	return 0;
 }
 
@@ -598,7 +609,7 @@ static int imx6_pcie_deassert_core_reset(struct imx_pcie_priv *priv)
 {
 	struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
 
-	imx6_pcie_toggle_power();
+	imx6_pcie_toggle_power(priv->vpcie);
 
 	enable_pcie_clock();
 
@@ -717,6 +728,10 @@ static int imx_pcie_dm_probe(struct udevice *dev)
 {
 	struct imx_pcie_priv *priv = dev_get_priv(dev);
 
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
+	device_get_supply_regulator(dev, "vpcie-supply", &priv->vpcie);
+#endif
+
 	/* if PERST# valid from dt then assert it */
 	gpio_request_by_name(dev, "reset-gpio", 0, &priv->reset_gpio,
 			     GPIOD_IS_OUT);
-- 
2.17.1