[PATCH 04/12] ARM: dts: sun7i: Sync from Linux v5.18-rc1
Samuel Holland
samuel at sholland.org
Wed Apr 27 22:31:23 CEST 2022
Copy the devicetree source for the A20 SoC and all existing boards
verbatim from the Linux v5.18-rc1 tag.
This commit also adds the following new board devicetrees:
- sun7i-a20-haoyu-marsboard.dts
- sun7i-a20-linutronix-testbox-v2.dts
- sun7i-a20-olinuxino-lime-emmc.dts
This update includes changes to the USB PHY detection GPIO properties
which are needed to convert that driver to use the DM GPIO framework.
Signed-off-by: Samuel Holland <samuel at sholland.org>
---
arch/arm/dts/Makefile | 3 +
arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts | 16 +-
arch/arm/dts/sun7i-a20-bananapi.dts | 41 ++-
arch/arm/dts/sun7i-a20-bananapro.dts | 16 +-
arch/arm/dts/sun7i-a20-cubieboard2.dts | 28 +-
arch/arm/dts/sun7i-a20-cubietruck.dts | 20 +-
arch/arm/dts/sun7i-a20-haoyu-marsboard.dts | 182 +++++++++++++
arch/arm/dts/sun7i-a20-hummingbird.dts | 21 +-
arch/arm/dts/sun7i-a20-i12-tvbox.dts | 16 +-
arch/arm/dts/sun7i-a20-icnova-swac.dts | 15 +-
arch/arm/dts/sun7i-a20-itead-ibox.dts | 8 +-
arch/arm/dts/sun7i-a20-lamobo-r1.dts | 16 +-
.../dts/sun7i-a20-linutronix-testbox-v2.dts | 47 ++++
arch/arm/dts/sun7i-a20-m3.dts | 14 +-
arch/arm/dts/sun7i-a20-olimex-som-evb.dts | 14 +-
arch/arm/dts/sun7i-a20-olimex-som204-evb.dts | 30 ++-
.../arm/dts/sun7i-a20-olinuxino-lime-emmc.dts | 32 +++
arch/arm/dts/sun7i-a20-olinuxino-lime.dts | 32 +--
arch/arm/dts/sun7i-a20-olinuxino-lime2.dts | 46 ++--
arch/arm/dts/sun7i-a20-olinuxino-micro.dts | 32 +--
arch/arm/dts/sun7i-a20-orangepi-mini.dts | 28 +-
arch/arm/dts/sun7i-a20-orangepi.dts | 26 +-
arch/arm/dts/sun7i-a20-pcduino3-nano.dts | 32 +--
arch/arm/dts/sun7i-a20-pcduino3.dts | 28 +-
arch/arm/dts/sun7i-a20-wexler-tab7200.dts | 13 +-
arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts | 24 +-
arch/arm/dts/sun7i-a20.dtsi | 254 ++++++++++++++++--
27 files changed, 707 insertions(+), 327 deletions(-)
create mode 100644 arch/arm/dts/sun7i-a20-haoyu-marsboard.dts
create mode 100644 arch/arm/dts/sun7i-a20-linutronix-testbox-v2.dts
create mode 100644 arch/arm/dts/sun7i-a20-olinuxino-lime-emmc.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 48ede8888e..7120d6a3aa 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -583,11 +583,13 @@ dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-bananapro.dtb \
sun7i-a20-cubieboard2.dtb \
sun7i-a20-cubietruck.dtb \
+ sun7i-a20-haoyu-marsboard.dtb \
sun7i-a20-hummingbird.dtb \
sun7i-a20-i12-tvbox.dtb \
sun7i-a20-icnova-swac.dtb \
sun7i-a20-itead-ibox.dtb \
sun7i-a20-lamobo-r1.dtb \
+ sun7i-a20-linutronix-testbox-v2.dtb \
sun7i-a20-m3.dtb \
sun7i-a20-m5.dtb \
sun7i-a20-mk808c.dtb \
@@ -595,6 +597,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-olimex-som204-evb.dtb \
sun7i-a20-olimex-som204-evb-emmc.dtb \
sun7i-a20-olinuxino-lime.dtb \
+ sun7i-a20-olinuxino-lime-emmc.dtb \
sun7i-a20-olinuxino-lime2.dtb \
sun7i-a20-olinuxino-lime2-emmc.dtb \
sun7i-a20-olinuxino-micro.dtb \
diff --git a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
index 4dbcad1343..caa935ca4f 100644
--- a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -74,12 +74,12 @@
leds {
compatible = "gpio-leds";
- green {
+ led-0 {
label = "bananapi-m1-plus:green:usr";
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
};
- pwr {
+ led-1 {
label = "bananapi-m1-plus:pwr:usr";
gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -129,14 +129,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii-id";
phy-supply = <®_gmac_3v3>;
status = "okay";
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
};
&hdmi {
@@ -171,6 +167,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-bananapi.dts b/arch/arm/dts/sun7i-a20-bananapi.dts
index 33040c43bc..46ecf9db23 100644
--- a/arch/arm/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/dts/sun7i-a20-bananapi.dts
@@ -77,7 +77,7 @@
leds {
compatible = "gpio-leds";
- green {
+ led {
label = "bananapi:green:usr";
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
};
@@ -104,16 +104,15 @@
&cpu0 {
cpu-supply = <®_dcdc2>;
- operating-points = <
+ operating-points =
/* kHz uV */
- 960000 1400000
- 912000 1400000
- 864000 1350000
- 720000 1250000
- 528000 1150000
- 312000 1100000
- 144000 1050000
- >;
+ <960000 1400000>,
+ <912000 1400000>,
+ <864000 1350000>,
+ <720000 1250000>,
+ <528000 1150000>,
+ <312000 1100000>,
+ <144000 1050000>;
};
&de {
@@ -131,14 +130,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii-id";
phy-supply = <®_gmac_3v3>;
status = "okay";
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
};
&hdmi {
@@ -171,6 +166,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
@@ -246,12 +247,6 @@
"SPI-MISO", "SPI-CE1", "",
"IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
"", "", "", "", "", "", "", "";
-
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
};
#include "axp209.dtsi"
@@ -329,9 +324,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-bananapro.dts b/arch/arm/dts/sun7i-a20-bananapro.dts
index 8a75545e22..e22f0e8bb1 100644
--- a/arch/arm/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/dts/sun7i-a20-bananapro.dts
@@ -63,12 +63,12 @@
leds {
compatible = "gpio-leds";
- blue {
+ led-0 {
label = "bananapro:blue:usr";
gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;
};
- green {
+ led-1 {
label = "bananapro:green:usr";
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
};
@@ -109,14 +109,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii-id";
phy-supply = <®_gmac_3v3>;
status = "okay";
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
};
&i2c0 {
@@ -143,6 +139,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-cubieboard2.dts b/arch/arm/dts/sun7i-a20-cubieboard2.dts
index 200685b0b1..e35e6990c4 100644
--- a/arch/arm/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/dts/sun7i-a20-cubieboard2.dts
@@ -75,12 +75,12 @@
leds {
compatible = "gpio-leds";
- blue {
+ led-0 {
label = "cubieboard2:blue:usr";
gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
};
- green {
+ led-1 {
label = "cubieboard2:green:usr";
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
};
@@ -115,13 +115,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
};
&hdmi {
@@ -161,6 +157,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
&ohci0 {
status = "okay";
};
@@ -173,14 +175,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
®_ahci_5v {
status = "okay";
};
@@ -236,9 +230,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
diff --git a/arch/arm/dts/sun7i-a20-cubietruck.dts b/arch/arm/dts/sun7i-a20-cubietruck.dts
index 46a9f4669e..52160e3683 100644
--- a/arch/arm/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/dts/sun7i-a20-cubietruck.dts
@@ -75,22 +75,22 @@
leds {
compatible = "gpio-leds";
- blue {
+ led-0 {
label = "cubietruck:blue:usr";
gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
};
- orange {
+ led-1 {
label = "cubietruck:orange:usr";
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
};
- white {
+ led-2 {
label = "cubietruck:white:usr";
gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>;
};
- green {
+ led-3 {
label = "cubietruck:green:usr";
gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>;
};
@@ -150,13 +150,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii-id";
status = "okay";
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
};
&hdmi {
@@ -194,6 +190,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-haoyu-marsboard.dts b/arch/arm/dts/sun7i-a20-haoyu-marsboard.dts
new file mode 100644
index 0000000000..097e479c27
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-haoyu-marsboard.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Conley Lee
+ * Conley Lee <conleylee at foxmail.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "HAOYU Electronics Marsboard A20";
+ compatible = "haoyu,a20-marsboard", "allwinner,sun7i-a20";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+};
+
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
+
+&codec {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
+ phy-handle = <&phy0>;
+ phy-mode = "mii";
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ axp209: pmic at 34 {
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+ status = "okay";
+};
+
+&gmac_mdio {
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ gmac_txerr: gmac-txerr-pin {
+ pins = "PA17";
+ function = "gmac";
+ };
+};
+
+®_ahci_5v {
+ status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-hummingbird.dts b/arch/arm/dts/sun7i-a20-hummingbird.dts
index fd0153f656..3def2a3305 100644
--- a/arch/arm/dts/sun7i-a20-hummingbird.dts
+++ b/arch/arm/dts/sun7i-a20-hummingbird.dts
@@ -100,19 +100,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_gmac_vdd>;
- /* phy reset config */
- snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
- snps,reset-active-low;
- /* wait 1s after reset, otherwise fail to read phy id */
- snps,reset-delays-us = <0 10000 1000000>;
status = "okay";
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
};
&i2c0 {
@@ -146,6 +137,16 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+ reset-assert-us = <10000>;
+ /* wait 1s after reset, otherwise fail to read phy id */
+ reset-deassert-us = <1000000>;
+ };
+};
+
&mmc0 {
vmmc-supply = <®_vcc3v0>;
bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/dts/sun7i-a20-i12-tvbox.dts
index 5f1c4f573d..b21ddd0ec1 100644
--- a/arch/arm/dts/sun7i-a20-i12-tvbox.dts
+++ b/arch/arm/dts/sun7i-a20-i12-tvbox.dts
@@ -62,12 +62,12 @@
leds {
compatible = "gpio-leds";
- red {
+ led-0 {
label = "i12_tvbox:red:usr";
gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
};
- blue {
+ led-1 {
label = "i12_tvbox:blue:usr";
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
};
@@ -115,14 +115,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
phy-supply = <®_gmac_3v3>;
status = "okay";
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
};
&i2c0 {
@@ -145,6 +141,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-icnova-swac.dts b/arch/arm/dts/sun7i-a20-icnova-swac.dts
index 949494730a..413505f45a 100644
--- a/arch/arm/dts/sun7i-a20-icnova-swac.dts
+++ b/arch/arm/dts/sun7i-a20-icnova-swac.dts
@@ -49,7 +49,8 @@
/ {
model = "ICnova-A20 SWAC";
- compatible = "swac,icnova-a20-swac", "incircuit,icnova-a20", "allwinner,sun7i-a20";
+ compatible = "incircuit,icnova-a20-swac", "incircuit,icnova-a20",
+ "allwinner,sun7i-a20";
aliases {
serial0 = &uart0;
@@ -75,13 +76,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
};
&i2c0 {
@@ -98,6 +95,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-itead-ibox.dts b/arch/arm/dts/sun7i-a20-itead-ibox.dts
index b90a7607d0..8ff83016ff 100644
--- a/arch/arm/dts/sun7i-a20-itead-ibox.dts
+++ b/arch/arm/dts/sun7i-a20-itead-ibox.dts
@@ -53,13 +53,13 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_itead_core>;
- green {
+ led-0 {
label = "itead_core:green:usr";
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- blue {
+ led-1 {
label = "itead_core:blue:usr";
gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -97,10 +97,12 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
+};
+&gmac_mdio {
phy1: ethernet-phy at 1 {
reg = <1>;
};
diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
index f91e1bee44..97518afe46 100644
--- a/arch/arm/dts/sun7i-a20-lamobo-r1.dts
+++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
@@ -75,7 +75,7 @@
leds {
compatible = "gpio-leds";
- green {
+ led {
label = "lamobo_r1:green:usr";
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
};
@@ -123,8 +123,6 @@
phy-mode = "rgmii";
phy-supply = <®_gmac_3v3>;
status = "okay";
- /delete-property/#address-cells;
- /delete-property/#size-cells;
fixed-link {
speed = <1000>;
@@ -229,14 +227,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
#include "axp209.dtsi"
&ac_power_supply {
@@ -322,9 +312,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <®_usb0_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-linutronix-testbox-v2.dts b/arch/arm/dts/sun7i-a20-linutronix-testbox-v2.dts
new file mode 100644
index 0000000000..da5a2eea4c
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-linutronix-testbox-v2.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2020 Linutronix GmbH
+ * Author: Benedikt Spranger <b.spranger at linutronix.de>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-lamobo-r1.dts"
+
+/ {
+ model = "Lamobo R1";
+ compatible = "linutronix,testbox-v2", "lamobo,lamobo-r1", "allwinner,sun7i-a20";
+
+ leds {
+ led-opto1 {
+ label = "lamobo_r1:opto:powerswitch";
+ gpios = <&pio 7 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-opto2 {
+ label = "lamobo_r1:opto:relay";
+ gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ status = "okay";
+
+ eeprom: eeprom at 50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ status = "okay";
+ };
+
+ atecc508a at 60 {
+ compatible = "atmel,atecc508a";
+ reg = <0x60>;
+ };
+};
+
+&can0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&can_ph_pins>;
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun7i-a20-m3.dts b/arch/arm/dts/sun7i-a20-m3.dts
index b8a1aaaf39..f161d52388 100644
--- a/arch/arm/dts/sun7i-a20-m3.dts
+++ b/arch/arm/dts/sun7i-a20-m3.dts
@@ -64,7 +64,7 @@
leds {
compatible = "gpio-leds";
- blue {
+ led {
label = "m3:blue:usr";
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
};
@@ -82,13 +82,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
};
&i2c0 {
@@ -111,6 +107,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
index f0e6a96e57..f05ee32bc9 100644
--- a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
+++ b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
@@ -75,7 +75,7 @@
leds {
compatible = "gpio-leds";
- green {
+ led {
label = "a20-olimex-som-evb:green:usr";
gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -111,13 +111,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
};
&hdmi {
@@ -202,6 +198,12 @@
};
};
+&gmac_mdio {
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
diff --git a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
index 823aabce04..54af6c1807 100644
--- a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
+++ b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
@@ -46,19 +46,19 @@
leds {
compatible = "gpio-leds";
- stat {
+ led-0 {
label = "a20-som204-evb:green:stat";
gpios = <&pio 8 0 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- led1 {
+ led-1 {
label = "a20-som204-evb:green:led1";
gpios = <&pio 8 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- led2 {
+ led-2 {
label = "a20-som204-evb:yellow:led2";
gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -105,18 +105,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy3>;
+ phy-handle = <&phy3>;
phy-mode = "rgmii";
phy-supply = <®_vcc3v3>;
-
- snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 1000000>;
status = "okay";
-
- phy3: ethernet-phy at 3 {
- reg = <3>;
- };
};
&hdmi {
@@ -161,6 +153,16 @@
status = "okay";
};
+&gmac_mdio {
+ phy3: ethernet-phy at 3 {
+ reg = <3>;
+ reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+ reset-assert-us = <10000>;
+ /* wait 1s after reset, otherwise fail to read phy id */
+ reset-deassert-us = <1000000>;
+ };
+};
+
&mmc0 {
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
@@ -314,8 +316,8 @@
};
&usbphy {
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime-emmc.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime-emmc.dts
new file mode 100644
index 0000000000..033cab3443
--- /dev/null
+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime-emmc.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Olimex Ltd.
+ * Author: Stefan Mavrodiev <stefan at olimex.com>
+ */
+
+#include "sun7i-a20-olinuxino-lime.dts"
+
+/ {
+ model = "Olimex A20-OLinuXino-LIME-eMMC";
+ compatible = "olimex,a20-olinuxino-lime-emmc", "allwinner,sun7i-a20";
+
+ mmc2_pwrseq: pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&mmc2 {
+ vmmc-supply = <®_vcc3v3>;
+ vqmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ non-removable;
+ mmc-pwrseq = <&mmc2_pwrseq>;
+ status = "okay";
+
+ emmc: emmc at 0 {
+ reg = <0>;
+ compatible = "mmc-card";
+ broken-hpi;
+ };
+};
diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
index 5e411194bf..92938d0222 100644
--- a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
@@ -78,7 +78,7 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_olinuxinolime>;
- green {
+ led {
label = "a20-olinuxino-lime:green:usr";
gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -106,13 +106,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
};
&hdmi {
@@ -149,6 +145,12 @@
};
};
+&gmac_mdio {
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
@@ -174,18 +176,6 @@
function = "gpio_out";
drive-strength = <20>;
};
-
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_vbus_detect_pin: usb0-vbus-detect-pin {
- pins = "PH5";
- function = "gpio_in";
- bias-pull-down;
- };
};
®_ahci_5v {
@@ -217,10 +207,8 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
index 996201665b..ecb91fb899 100644
--- a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
@@ -75,7 +75,7 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_olinuxinolime>;
- green {
+ led {
label = "a20-olinuxino-lime2:green:usr";
gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -111,13 +111,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii-id";
status = "okay";
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
};
&hdmi {
@@ -154,6 +150,12 @@
vref-supply = <®_vcc3v0>;
};
+&gmac_mdio {
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
@@ -174,23 +176,17 @@
};
&pio {
+ vcc-pa-supply = <®_vcc3v3>;
+ vcc-pc-supply = <®_vcc3v3>;
+ vcc-pe-supply = <®_ldo3>;
+ vcc-pf-supply = <®_vcc3v3>;
+ vcc-pg-supply = <®_ldo4>;
+
led_pins_olinuxinolime: led-pins {
pins = "PH2";
function = "gpio_out";
drive-strength = <20>;
};
-
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_vbus_detect_pin: usb0-vbus-detect-pin {
- pins = "PH5";
- function = "gpio_in";
- bias-pull-down;
- };
};
®_ahci_5v {
@@ -200,6 +196,14 @@
#include "axp209.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
®_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -267,10 +271,8 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
index 840ae1194a..a1b89b2a29 100644
--- a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
@@ -82,7 +82,7 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_olinuxino>;
- green {
+ led {
label = "a20-olinuxino-micro:green:usr";
gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -118,13 +118,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
};
&hdmi {
@@ -215,6 +211,12 @@
};
};
+&gmac_mdio {
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
@@ -252,18 +254,6 @@
function = "gpio_out";
drive-strength = <20>;
};
-
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-
- usb0_vbus_detect_pin: usb0-vbus-detect-pin {
- pins = "PH5";
- function = "gpio_in";
- bias-pull-down;
- };
};
#include "axp209.dtsi"
@@ -355,10 +345,8 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
- usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
index 15881081ca..84efa01e7c 100644
--- a/arch/arm/dts/sun7i-a20-orangepi-mini.dts
+++ b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
@@ -75,12 +75,12 @@
leds {
compatible = "gpio-leds";
- green {
+ led-0 {
label = "orangepi:green:usr";
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
};
- blue {
+ led-1 {
label = "orangepi:blue:usr";
gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
};
@@ -120,14 +120,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_gmac_3v3>;
status = "okay";
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
};
&hdmi {
@@ -158,6 +154,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
@@ -176,14 +178,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
®_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -239,9 +233,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-orangepi.dts b/arch/arm/dts/sun7i-a20-orangepi.dts
index d64de2e73a..5d77f1d981 100644
--- a/arch/arm/dts/sun7i-a20-orangepi.dts
+++ b/arch/arm/dts/sun7i-a20-orangepi.dts
@@ -64,7 +64,7 @@
leds {
compatible = "gpio-leds";
- green {
+ led {
label = "orangepi:green:usr";
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
};
@@ -96,14 +96,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <®_gmac_3v3>;
status = "okay";
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
};
&i2c0 {
@@ -124,6 +120,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
@@ -135,14 +137,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
®_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -198,9 +192,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
index 205eaae44a..e40ecb48d7 100644
--- a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
+++ b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2015 Adam Sampson <ats at offog.org>
+ * Copyright 2015-2020 Adam Sampson <ats at offog.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -72,14 +72,12 @@
leds {
compatible = "gpio-leds";
- /* Marked "LED3" on the PCB. */
- usr1 {
+ led-3 {
label = "pcduino3-nano:green:usr1";
gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */
};
- /* Marked "LED4" on the PCB. */
- usr2 {
+ led-4 {
label = "pcduino3-nano:green:usr2";
gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */
};
@@ -114,13 +112,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii-id";
status = "okay";
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
};
&hdmi {
@@ -149,6 +143,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
@@ -168,14 +168,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
®_ahci_5v {
gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
status = "okay";
@@ -226,9 +218,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb1_vbus>;
status = "okay";
diff --git a/arch/arm/dts/sun7i-a20-pcduino3.dts b/arch/arm/dts/sun7i-a20-pcduino3.dts
index a72ed4318d..4f8d55d3ba 100644
--- a/arch/arm/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/dts/sun7i-a20-pcduino3.dts
@@ -64,12 +64,12 @@
leds {
compatible = "gpio-leds";
- tx {
+ led-0 {
label = "pcduino3:green:tx";
gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
};
- rx {
+ led-1 {
label = "pcduino3:green:rx";
gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
};
@@ -122,13 +122,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
};
&i2c0 {
@@ -149,6 +145,12 @@
status = "okay";
};
+&gmac_mdio {
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
@@ -168,14 +170,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
®_ahci_5v {
gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
status = "okay";
@@ -226,9 +220,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
diff --git a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
index ffade253d1..fef02fcbbd 100644
--- a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
+++ b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
@@ -64,6 +64,7 @@
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+ power-supply = <®_vcc3v3>;
};
chosen {
@@ -156,14 +157,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pin>;
@@ -223,9 +216,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
index c27e56091f..3bfae98f3c 100644
--- a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
+++ b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
@@ -81,13 +81,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
- phy = <&phy1>;
+ phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- };
};
&i2c0 {
@@ -110,6 +106,12 @@
#include "axp209.dtsi"
+&gmac_mdio {
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
@@ -145,14 +147,6 @@
status = "okay";
};
-&pio {
- usb0_id_detect_pin: usb0-id-detect-pin {
- pins = "PH4";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
®_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -206,9 +200,7 @@
};
&usbphy {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>;
- usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
diff --git a/arch/arm/dts/sun7i-a20.dtsi b/arch/arm/dts/sun7i-a20.dtsi
index 641a8fa6d4..5574299685 100644
--- a/arch/arm/dts/sun7i-a20.dtsi
+++ b/arch/arm/dts/sun7i-a20.dtsi
@@ -47,6 +47,7 @@
#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/clock/sun7i-a20-ccu.h>
#include <dt-bindings/reset/sun4i-a10-ccu.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&gic>;
@@ -105,16 +106,15 @@
reg = <0>;
clocks = <&ccu CLK_CPU>;
clock-latency = <244144>; /* 8 32k periods */
- operating-points = <
+ operating-points =
/* kHz uV */
- 960000 1400000
- 912000 1400000
- 864000 1300000
- 720000 1200000
- 528000 1100000
- 312000 1000000
- 144000 1000000
- >;
+ <960000 1400000>,
+ <912000 1400000>,
+ <864000 1300000>,
+ <720000 1200000>,
+ <528000 1100000>,
+ <312000 1000000>,
+ <144000 1000000>;
#cooling-cells = <2>;
};
@@ -124,22 +124,21 @@
reg = <1>;
clocks = <&ccu CLK_CPU>;
clock-latency = <244144>; /* 8 32k periods */
- operating-points = <
+ operating-points =
/* kHz uV */
- 960000 1400000
- 912000 1400000
- 864000 1300000
- 720000 1200000
- 528000 1100000
- 312000 1000000
- 144000 1000000
- >;
+ <960000 1400000>,
+ <912000 1400000>,
+ <864000 1300000>,
+ <720000 1200000>,
+ <528000 1100000>,
+ <312000 1000000>,
+ <144000 1000000>;
#cooling-cells = <2>;
};
};
thermal-zones {
- cpu_thermal {
+ cpu-thermal {
/* milliseconds */
polling-delay-passive = <250>;
polling-delay = <1000>;
@@ -180,7 +179,7 @@
default-pool {
compatible = "shared-dma-pool";
size = <0x6000000>;
- alloc-ranges = <0x4a000000 0x6000000>;
+ alloc-ranges = <0x40000000 0x10000000>;
reusable;
linux,cma-default;
};
@@ -333,7 +332,7 @@
#dma-cells = <2>;
};
- nfc: nand at 1c03000 {
+ nfc: nand-controller at 1c03000 {
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
@@ -376,6 +375,16 @@
num-cs = <1>;
};
+ csi0: csi at 1c09000 {
+ compatible = "allwinner,sun7i-a20-csi0";
+ reg = <0x01c09000 0x1000>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
+ clock-names = "bus", "isp", "ram";
+ resets = <&ccu RST_CSI0>;
+ status = "disabled";
+ };
+
emac: ethernet at 1c0b000 {
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
@@ -394,11 +403,12 @@
};
tcon0: lcd-controller at 1c0c000 {
- compatible = "allwinner,sun7i-a20-tcon";
+ compatible = "allwinner,sun7i-a20-tcon0",
+ "allwinner,sun7i-a20-tcon";
reg = <0x01c0c000 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&ccu RST_TCON0>;
- reset-names = "lcd";
+ resets = <&ccu RST_TCON0>, <&ccu RST_LVDS>;
+ reset-names = "lcd", "lvds";
clocks = <&ccu CLK_AHB_LCD0>,
<&ccu CLK_TCON0_CH0>,
<&ccu CLK_TCON0_CH1>;
@@ -406,6 +416,7 @@
"tcon-ch0",
"tcon-ch1";
clock-output-names = "tcon0-pixel-clock";
+ #clock-cells = <0>;
dmas = <&dma SUN4I_DMA_DEDICATED 14>;
ports {
@@ -443,7 +454,8 @@
};
tcon1: lcd-controller at 1c0d000 {
- compatible = "allwinner,sun7i-a20-tcon";
+ compatible = "allwinner,sun7i-a20-tcon1",
+ "allwinner,sun7i-a20-tcon";
reg = <0x01c0d000 0x1000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
resets = <&ccu RST_TCON1>;
@@ -455,6 +467,7 @@
"tcon-ch0",
"tcon-ch1";
clock-output-names = "tcon1-pixel-clock";
+ #clock-cells = <0>;
dmas = <&dma SUN4I_DMA_DEDICATED 15>;
ports {
@@ -586,13 +599,14 @@
phy-names = "usb";
extcon = <&usbphy 0>;
allwinner,sram = <&otg_sram 1>;
+ dr_mode = "otg";
status = "disabled";
};
usbphy: phy at 1c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun7i-a20-usb-phy";
- reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
+ reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
reg-names = "phy_ctrl", "pmu1", "pmu2";
clocks = <&ccu CLK_USB_PHY>;
clock-names = "usb_phy";
@@ -716,6 +730,17 @@
status = "disabled";
};
+ csi1: csi at 1c1d000 {
+ compatible = "allwinner,sun7i-a20-csi1",
+ "allwinner,sun4i-a10-csi1";
+ reg = <0x01c1d000 0x1000>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
+ clock-names = "bus", "ram";
+ resets = <&ccu RST_CSI1>;
+ status = "disabled";
+ };
+
spi3: spi at 1c1f000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
@@ -751,21 +776,70 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
+ /omit-if-no-ref/
+ can_pa_pins: can-pa-pins {
+ pins = "PA16", "PA17";
+ function = "can";
+ };
+
+ /omit-if-no-ref/
can_ph_pins: can-ph-pins {
pins = "PH20", "PH21";
function = "can";
};
+ /omit-if-no-ref/
clk_out_a_pin: clk-out-a-pin {
pins = "PI12";
function = "clk_out_a";
};
+ /omit-if-no-ref/
clk_out_b_pin: clk-out-b-pin {
pins = "PI13";
function = "clk_out_b";
};
+ /omit-if-no-ref/
+ csi0_8bits_pins: csi-8bits-pins {
+ pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+ "PE6", "PE7", "PE8", "PE9", "PE10",
+ "PE11";
+ function = "csi0";
+ };
+
+ /omit-if-no-ref/
+ csi0_clk_pin: csi-clk-pin {
+ pins = "PE1";
+ function = "csi0";
+ };
+
+ /omit-if-no-ref/
+ csi1_8bits_pg_pins: csi1-8bits-pg-pins {
+ pins = "PG0", "PG2", "PG3", "PG4", "PG5",
+ "PG6", "PG7", "PG8", "PG9", "PG10",
+ "PG11";
+ function = "csi1";
+ };
+
+ /omit-if-no-ref/
+ csi1_24bits_ph_pins: csi1-24bits-ph-pins {
+ pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+ "PH5", "PH6", "PH7", "PH8", "PH9",
+ "PH10", "PH11", "PH12", "PH13", "PH14",
+ "PH15", "PH16", "PH17", "PH18", "PH19",
+ "PH20", "PH21", "PH22", "PH23", "PH24",
+ "PH25", "PH26", "PH27";
+ function = "csi1";
+ };
+
+ /omit-if-no-ref/
+ csi1_clk_pg_pin: csi1-clk-pg-pin {
+ pins = "PG1";
+ function = "csi1";
+ };
+
+ /omit-if-no-ref/
emac_pa_pins: emac-pa-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
@@ -775,6 +849,17 @@
function = "emac";
};
+ /omit-if-no-ref/
+ emac_ph_pins: emac-ph-pins {
+ pins = "PH8", "PH9", "PH10", "PH11",
+ "PH14", "PH15", "PH16", "PH17",
+ "PH18", "PH19", "PH20", "PH21",
+ "PH22", "PH23", "PH24", "PH25",
+ "PH26";
+ function = "emac";
+ };
+
+ /omit-if-no-ref/
gmac_mii_pins: gmac-mii-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
@@ -784,6 +869,7 @@
function = "gmac";
};
+ /omit-if-no-ref/
gmac_rgmii_pins: gmac-rgmii-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
@@ -798,46 +884,69 @@
drive-strength = <40>;
};
+ /omit-if-no-ref/
i2c0_pins: i2c0-pins {
pins = "PB0", "PB1";
function = "i2c0";
};
+ /omit-if-no-ref/
i2c1_pins: i2c1-pins {
pins = "PB18", "PB19";
function = "i2c1";
};
+ /omit-if-no-ref/
i2c2_pins: i2c2-pins {
pins = "PB20", "PB21";
function = "i2c2";
};
+ /omit-if-no-ref/
i2c3_pins: i2c3-pins {
pins = "PI0", "PI1";
function = "i2c3";
};
+ /omit-if-no-ref/
ir0_rx_pin: ir0-rx-pin {
pins = "PB4";
function = "ir0";
};
+ /omit-if-no-ref/
ir0_tx_pin: ir0-tx-pin {
pins = "PB3";
function = "ir0";
};
+ /omit-if-no-ref/
ir1_rx_pin: ir1-rx-pin {
pins = "PB23";
function = "ir1";
};
+ /omit-if-no-ref/
ir1_tx_pin: ir1-tx-pin {
pins = "PB22";
function = "ir1";
};
+ /omit-if-no-ref/
+ lcd_lvds0_pins: lcd-lvds0-pins {
+ pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+ "PD5", "PD6", "PD7", "PD8", "PD9";
+ function = "lvds0";
+ };
+
+ /omit-if-no-ref/
+ lcd_lvds1_pins: lcd-lvds1-pins {
+ pins = "PD10", "PD11", "PD12", "PD13", "PD14",
+ "PD15", "PD16", "PD17", "PD18", "PD19";
+ function = "lvds1";
+ };
+
+ /omit-if-no-ref/
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
@@ -846,6 +955,7 @@
bias-pull-up;
};
+ /omit-if-no-ref/
mmc2_pins: mmc2-pins {
pins = "PC6", "PC7", "PC8",
"PC9", "PC10", "PC11";
@@ -854,6 +964,7 @@
bias-pull-up;
};
+ /omit-if-no-ref/
mmc3_pins: mmc3-pins {
pins = "PI4", "PI5", "PI6",
"PI7", "PI8", "PI9";
@@ -862,127 +973,206 @@
bias-pull-up;
};
+ /omit-if-no-ref/
ps2_0_pins: ps2-0-pins {
pins = "PI20", "PI21";
function = "ps2";
};
+ /omit-if-no-ref/
ps2_1_ph_pins: ps2-1-ph-pins {
pins = "PH12", "PH13";
function = "ps2";
};
+ /omit-if-no-ref/
pwm0_pin: pwm0-pin {
pins = "PB2";
function = "pwm";
};
+ /omit-if-no-ref/
pwm1_pin: pwm1-pin {
pins = "PI3";
function = "pwm";
};
+ /omit-if-no-ref/
spdif_tx_pin: spdif-tx-pin {
pins = "PB13";
function = "spdif";
bias-pull-up;
};
+ /omit-if-no-ref/
spi0_pi_pins: spi0-pi-pins {
pins = "PI11", "PI12", "PI13";
function = "spi0";
};
+ /omit-if-no-ref/
spi0_cs0_pi_pin: spi0-cs0-pi-pin {
pins = "PI10";
function = "spi0";
};
+ /omit-if-no-ref/
spi0_cs1_pi_pin: spi0-cs1-pi-pin {
pins = "PI14";
function = "spi0";
};
+ /omit-if-no-ref/
spi1_pi_pins: spi1-pi-pins {
pins = "PI17", "PI18", "PI19";
function = "spi1";
};
+ /omit-if-no-ref/
spi1_cs0_pi_pin: spi1-cs0-pi-pin {
pins = "PI16";
function = "spi1";
};
+ /omit-if-no-ref/
spi2_pb_pins: spi2-pb-pins {
pins = "PB15", "PB16", "PB17";
function = "spi2";
};
+ /omit-if-no-ref/
spi2_cs0_pb_pin: spi2-cs0-pb-pin {
pins = "PB14";
function = "spi2";
};
+ /omit-if-no-ref/
spi2_pc_pins: spi2-pc-pins {
pins = "PC20", "PC21", "PC22";
function = "spi2";
};
+ /omit-if-no-ref/
spi2_cs0_pc_pin: spi2-cs0-pc-pin {
pins = "PC19";
function = "spi2";
};
+ /omit-if-no-ref/
uart0_pb_pins: uart0-pb-pins {
pins = "PB22", "PB23";
function = "uart0";
};
+ /omit-if-no-ref/
+ uart0_pf_pins: uart0-pf-pins {
+ pins = "PF2", "PF4";
+ function = "uart0";
+ };
+
+ /omit-if-no-ref/
+ uart1_pa_pins: uart1-pa-pins {
+ pins = "PA10", "PA11";
+ function = "uart1";
+ };
+
+ /omit-if-no-ref/
+ uart1_cts_rts_pa_pins: uart1-cts-rts-pa-pins {
+ pins = "PA12", "PA13";
+ function = "uart1";
+ };
+
+ /omit-if-no-ref/
+ uart2_pa_pins: uart2-pa-pins {
+ pins = "PA2", "PA3";
+ function = "uart2";
+ };
+
+ /omit-if-no-ref/
+ uart2_cts_rts_pa_pins: uart2-cts-rts-pa-pins {
+ pins = "PA0", "PA1";
+ function = "uart2";
+ };
+
+ /omit-if-no-ref/
uart2_pi_pins: uart2-pi-pins {
pins = "PI18", "PI19";
function = "uart2";
};
+ /omit-if-no-ref/
uart2_cts_rts_pi_pins: uart2-cts-rts-pi-pins {
pins = "PI16", "PI17";
function = "uart2";
};
+ /omit-if-no-ref/
uart3_pg_pins: uart3-pg-pins {
pins = "PG6", "PG7";
function = "uart3";
};
+ /omit-if-no-ref/
uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins {
pins = "PG8", "PG9";
function = "uart3";
};
+ /omit-if-no-ref/
uart3_ph_pins: uart3-ph-pins {
pins = "PH0", "PH1";
function = "uart3";
};
+ /omit-if-no-ref/
+ uart3_cts_rts_ph_pins: uart3-cts-rts-ph-pins {
+ pins = "PH2", "PH3";
+ function = "uart3";
+ };
+
+ /omit-if-no-ref/
uart4_pg_pins: uart4-pg-pins {
pins = "PG10", "PG11";
function = "uart4";
};
+ /omit-if-no-ref/
uart4_ph_pins: uart4-ph-pins {
pins = "PH4", "PH5";
function = "uart4";
};
+ /omit-if-no-ref/
+ uart5_ph_pins: uart5-ph-pins {
+ pins = "PH6", "PH7";
+ function = "uart5";
+ };
+
+ /omit-if-no-ref/
uart5_pi_pins: uart5-pi-pins {
pins = "PI10", "PI11";
function = "uart5";
};
+ /omit-if-no-ref/
+ uart6_pa_pins: uart6-pa-pins {
+ pins = "PA12", "PA13";
+ function = "uart6";
+ };
+
+ /omit-if-no-ref/
uart6_pi_pins: uart6-pi-pins {
pins = "PI12", "PI13";
function = "uart6";
};
+ /omit-if-no-ref/
+ uart7_pa_pins: uart7-pa-pins {
+ pins = "PA14", "PA15";
+ function = "uart7";
+ };
+
+ /omit-if-no-ref/
uart7_pi_pins: uart7-pi-pins {
pins = "PI20", "PI21";
function = "uart7";
@@ -1004,6 +1194,8 @@
wdt: watchdog at 1c20c90 {
compatible = "allwinner,sun4i-a10-wdt";
reg = <0x01c20c90 0x10>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
};
rtc: rtc at 1c20d00 {
@@ -1326,8 +1518,12 @@
snps,fixed-burst;
snps,force_sf_dma_mode;
status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
+
+ gmac_mdio: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
hstimer at 1c60000 {
@@ -1341,7 +1537,7 @@
};
gic: interrupt-controller at 1c81000 {
- compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
<0x01c84000 0x2000>,
--
2.35.1
More information about the U-Boot
mailing list