[PATCH 2/2] imx8mn/8mp: Select ENV_IS_NOWHERE

[Fabio Estevam]

Hi Michael,

On 21/04/2022 13:34, Michael Nazzareno Trimarchi wrote:

> That function should drop. There is not other architecture that does
> it. What about:

I implemented your suggestion like this:

--- a/arch/arm/mach-imx/imx8m/soc.c
+++ b/arch/arm/mach-imx/imx8m/soc.c
@@ -1536,6 +1536,14 @@ enum env_location arch_env_get_location(enum 
env_operation op, int prio)
                 return ENVL_UNKNOWN;

         switch (dev) {
+       case USB_BOOT:
+               if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH))
+                       return ENVL_SPI_FLASH;
+               if (IS_ENABLED(CONFIG_ENV_IS_IN_NAND))
+                       return ENVL_NAND;
+               if (IS_ENABLED(CONFIG_ENV_IS_IN_MMC))
+                       return ENVL_MMC;
+               return ENVL_NOWHERE;
         case QSPI_BOOT:
         case SPI_NOR_BOOT:
                 if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH))

This still allows me to save the env into the eMMC when U-Boot
is loaded from USB.

> register_enviroment_hook()
> deregister_enviroment_hook()
> 
> This can replace the one default with board/arch etc

Marek submitted these patches:

https://source.denx.de/u-boot/u-boot/-/commit/de70e8879bb253f4d2a9ba9149cd41cb38b94ed8

https://source.denx.de/u-boot/u-boot/-/commit/e4dc2d0620851d6e0e784d4ef0a50f26e1e73857

Is this the mechanism that you are looking for?